Polytechnique > Recherche > Répertoire > Un professeur ou chercheur

Répertoire des expertises

Photo de Oumarou Savadogo

Oumarou Savadogo

Professeur titulaire
Département de génie chimique

Publications à Polytechnique

Ces données sont extraites du Répertoire des publications de l'École Polytechnique de Montréal. La liste ci-dessous contient seulement les publications auxquelles a participé le professeur ou le chercheur depuis son entrée en fonction à l’École. De plus, certaines publications ne sont pas dans cette liste, notamment les notes de cours et les rapports techniques internes plus d'information...

1Wang, W., Savadogo, O., Ma, Z.-F. (2012). Preparation of New Titanium Oxy Nitride Based Electro Catalysts Using an Anhydrous Sol-Gel Method for Water Electrolysis in Acid Medium. International Journal of Hydrogen Energy, 37(9), p. 7405-7417. 
2Martin, E., Tartakovsky, B., Savadogo, O. (2011). Cathode Materials Evaluation in Microbial Fuel Cells: A Comparison of Carbon, Mn2O3, Fe2O3 and Platinum Materials. Electrochimica Acta, 58(1), p. 58-66. 
3Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., Martel, S. (2011). Corrosion Study of Single Crystal Ni-Mn-Ga Alloy and Tb 0.27Dy0.73Fe1.95 Alloy for the Design of New Medical Microdevices. Journal of Materials Science: Materials in Medicine, 22(2), p. 237-245. 
4Martin, E., Savadogo, O., Guiot, S.R., Tartakovsky, B. (2010). The Influence of Operational Conditions on the Performance of a Microbial Fuel Cell Seeded With Mesophilic Anaerobic Sludge. Biochemical Engineering Journal, 51(3), p. 132-139. 
5Wang, G., Wu, H., Wexler, D., Liu, H., Savadogo, O. (2010). Ni@Pt Core-Shell Nanoparticles With Enhanced Catalytic Activity for Oxygen Reduction Reaction. Journal of Alloys and Compounds, 503(1), p. L1-L14. 
6Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., Martel, S. (2010). Corrosion Study of Iron-Cobalt Alloys for MRI-Based Propulsion Embedded in Untethered Microdevices Operating in the Vascular Network. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 93(1), p. 203-211. 
7Wu, H., Wexler, D., Liu, H., Savadogo, O., Ahn, J., Wang, G. (2010). Pt1-XCox Nanoparticles As Cathode Catalyst for Proton Exchange Membrane Fuel Cells With Enhanced Catalytic Activity. Materials Chemistry and Physics, 124(1), p. 841-844. 
8Savadogo O. (2010). Thin-Film Semiconductors Deposited in Nanometric Scales by Electrochemical and Wet Chemical Methods for Photovoltaic Solar Cell Applications. Advances in Electrochemical Science and Engineering. Weinheim: Wiley-VCH Verlag GmbH & Co. p. 277-350.
9Shanian, A., Savadogo, O. (2009). A Methodological Concept for Material Selection of Highly Sensitive Components Based on Multiple Criteria Decision Analysis. Expert Systems With Applications, 36(2), p. 1362-1370. 
10Fouda-Onana, F., Bah, S., Savadogo, O. (2009). Palladium-Copper Alloys As Catalysts for the Oxygen Reduction Reaction in an Acidic Media I: Correlation Between the ORR Kinetic Parameters and Intrinsic Physical Properties of the Alloys. Journal of Electroanalytical Chemistry, 636(1-2), p. 1-9. 
11Ling, J., Longtin, G., Savadogo, O. (2009). Comparison of Ethanol and Methanol Crossover Through Different MEA Components and Structures by Cyclic Voltammetry. Asia-Pacific Journal of Chemical Engineering, 4(1), p. 25-32. 
12Varela, F.J.R., Savadogo, O. (2009). Ethanol-Tolerant Pt-Alloy Cathodes for Direct Ethanol Fuel Cell (DEFC) Applications. Asia-Pacific Journal of Chemical Engineering, 4(1), p. 17-24. 
13Fouda-Onana, F., Savadogo, O. (2009). Study of O2 and OH Adsorption Energies on Pd-Cu Alloys Surface With a Quantum Chemistry Approach. Electrochimica Acta, 54(6), p. 1769-1776. 
14Varela, F.J.R., Luna, S.F.S.O. (2009). Synthesis and Evaluation of Highly Tolerant Pd Electrocatalysts As Cathodes in Direct Ethylene Glycol Fuel Cells (DEGFC). Energies, 2(4), p. 944-956. 
15Savadogo, O. (2009). Status on the Development of New Electro Catalysts for the ORR in Acid Medium for PEM Fuel Cell Applications. International Symposium on Renewable Energy Storage and Conversion Technologies.
16Rajagopalan, S., Sawan, M., Ghafar-Zadeh, E., Savadogo, O., Chodavarapu, V.P. (2008). A Polypyrrole-Based Strain Sensor Dedicated to Measure Bladder Volume in Patients With Urinary Dysfunction. Sensors, 8(8), p. 5081-5095. 
17Savadogo, O., Varela, F.J.R. (2008). Palladium-Alloy Catalysts As Ethanol Tolerant Cathodes for Direct Alcohol Fuel Cell Applications. Journal of New Materials for Electrochemical Systems, 11(2), p. 69-74. 
18Varela, F.J.R., Savadogo, O. (2008). Catalytic Activity of Carbon-Supported Electrocatalysts for Direct Ethanol Fuel Cell Applications. Journal of the Electrochemical Society, 155(6), p. B618-B624. 
19Oishi, K., Savadogo, O. (2008). New Method of Preparation of Catalyzed Gas Diffusion Electrode for Polymer Electrolyte Fuel Cells Based on Ultrasonic Direct Solution Spray Reaction. Journal of New Materials for Electrochemical Systems, 11(4), p. 221-227. 
20Fraire Lunaa, S., Rodriguez Varela, F.J., Dabek Klapco, R., Savadogo, O. (2008). Performance of Pd/C Cathode Electro-Catalysts for the ORR in Sulfuric Acid Containing Small Organic Molecules. ECS Transactions, 16(2), p. 761-767. 
21Martin, E., Tartakovsk, B., Savadogo, O. (2008). Study of Charge Transfer Reaction in a Microbial Fuel Cell. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-78. 
22Pouponneau, P., Savadogo, O., Napporn, T., Yahia, L., Martel, S. (2008). Potentiodynamic Polarization Assays on Magnetic Materials for New Medical Micros-Devices. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-79. 
23Fouda-Onana, F., Bah, S., Savadogo, O. (2008). Investigations of Pd-Cu Electrocayalyst for Oxygen Reduction Reaction in Acidic Media With RDE Method. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-83. 
24Oishi, K., Savadogo, O. (2008). New Process of the Preparation of Catalyzed Gas Diffusion Electrode for PEM Fuel Cells Based on Ultrasonic Direct Solution Spray Reaction Method. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-84. 
25Tian, H., Savadogo, O. (2008). Direct Glycerol PEM Fuel Cell (DGFC). 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-88. 
26Tian, H., Savadogo, O. (2008). The Effect of Alkaline Doping Conditions on Polybenzimidazole (PBI) Membrane Properties for Alkaline Polymer Electrolyte Fuel Cell Application. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-89. 
27Savadogo, O., Rodriguez Varela, F.J. (2008). Palladium-Alloy Catalysts As Ethanol Tolerant Cathodes for Direct Alcohol Fuel Cell Applications. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-90. 
28Sha, G., Lee, K.E., Charbonneau, C., Demopoulos, G.P., Gauvin, R., Savadogo, O. (2008). Low-Temperature Fabrication of TiO2 Nanocrystalline Film Electrodes for Dye-Sensitized Solar Cells. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-82. 
29Petuenju, E.N., Savadogo, O. (2008). Characterization of Chemically Deposited Low-Cost II-VI Thin Films Solar Cells : Modifying Effects With Catalytic Silicotungstic Acid (STA). 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-85. 
30Ocampo, M., Savadogo, O. (2008). The Effect of Silicotungstic Acid Concentration on the Optoelectronic Properties of Thim Films CdS-CdTe Deposited on Various Conducting Glasses. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-86. 
31Polizu, S., Savadogo, O., Maugey, M., Rouabhia, M., Poulin, P., Yahia, L. (2008). Electrochemical Behaviour and Nanoscale Characteristics of CNT-Based Fibers As New Substrate for Cell Growth. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-91. 
32Rodriguez Varela, F.J., Savadogo, O. (2008). Catalytic Activity of Carbon-Supported Electrocatalysts for Direct Ethanol Fuel Cell Applications. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-93. 
33Rodriguez Varela, F.J., Savadogo, O. (2008). Electroactive Ethanol Tolerant Pt-Alloy Cathodes for DEFC Applications. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-94. 
34Fouda, F., Bah Souleymane, O., Savadogo, O. (2008). Elaboration and Characterisation of Pd-Cr Alloys for PEM Fuel Cells. 7th International Symposium on New Materials for Electrochemical Systems, p. NMES08-95. 
35Varela, F.J.R., Savadogo, O. (2007). Electrocatalizadores a base de Aleaciones de Pt con Applicacion como Anodos en Celdas DEFC. VII Congreso Sociedad Mexicana del Hidrógeno y III Jornadas de la Red Ibero Americana de Pilas de Combustible e Hidrogeno.
36Varela, F.J.R., Savadogo, O. (2007). Catodos a Base de Ru Tolerantes al Etanol para Aplicacion en Celdas de Combustible de Consumo Directo de Etanol (DEFC). VII Congreso Sociedad Mexicana del Hidrógeno y III Jornadas de la Red Ibero Americana de Pilas de Combustible e Hidrogeno.
37Varela, F.J.R., Savadogo, O. (2007). Aleaciones de Pt con Actividad Electrocatalitica Tolerantes al Etanol. VII Congreso Sociedad Mexicana Del Hidrógeno y III Jornadas De La Red Ibero Americana De Pilas De Combustible e Hidrogeno.
38Varela, F.J.R., Savadogo, O. (2007). Catalizadores a Base de Paladio y de Aleaciones de Paladio como Catodos Tolerantes al Etanol para Aplication en Celdas DEFC. VII Congreso Sociedad Mexicana del Hidrógeno y III Jornadas de la Red Ibero Americana de Pilas de Combustible e Hidrogeno.
39Shanian, A., Savadogo, O. (2006). A Material Selection Model Based on the Concept of Multiple Attribute Decision Making. Materials & Design, 27(4), p. 329-337. 
40Varela, F.J.R., Savadogo, O. (2006). Electroactive Alcohol Tolerant Pt-Alloys. Proton Exchange Membrane Fuel Cells 6 - 210th Electrochemical Society Meeting, v. 3, p. 181-187. 
41Varela, F.J.R., Savadogo, O. (2006). The Effect of Anode Catalysts on the Behavior of Low Temperature Direct Propane Polymer Electrolyte Fuel Cells (DPFC). Journal of New Materials for Electrochemical Systems, 9(2), p. 127-137. 
42Tian, H., Savadogo, O. (2006). Silicotungstic Acid Nafion Composite Membrane for Proton-Exchange Membrane Fuel Cell Operation at High Temperature. Journal of New Materials for Electrochemical Systems, 9(1), p. 61-71. 
43Shanian, A., Savadogo, O. (2006). TOPSIS Multiple-Criteria Decision Support Analysis for Material Selection of Metallic Bipolar Plates for Polymer Electrolyte Fuel Cell. Journal of Power Sources, 159(2), p. 1095-1104. 
44Shanian, A., Savadogo, O. (2006). ELECTRE I : Decision Support Model for Material Selection of Bipolar Plates for Polymer Electrolyte Fuel Cells Applications. Journal of New Materials for Electrochemical Systems, 9(3), p. 191-199. 
45Polizu, S., Savadogo, O., Poulin, P., Yahia, L. (2006). Applications of Carbon Nanotubes-Based Biomaterials in Biomedical Nanotechnology. Journal of Nanoscience and Nanotechnology, 6(7), p. 1883-1904. 
46Shanian, A., Savadogo, O. (2006). A Non-Compensatory Compromised Solution for Material Selection of Bipolar Plates for Polymer Electrolyte Membrane Fuel Cell (PEMFC) Using ELECTRE IV. Electrochimica Acta, 51(25), p. 5307-5315. 
47Shanian, A., Savadogo, O. (2006). Using Multi-Pseudocriteria and Fuzzy Outranking Relation Analysis for Material Selection of Bipolar Plates for PEFCs. Journal of the Electrochemical Society, 153(5), p. 887-896. 
48Martin, E., Manceur, A., Polizu, S., Savadogo, O., Wu, M.H., Yahia, L. (2006). Corrosion Behaviour of a Beta-Titanium Alloy. Bio-Medical Materials and Engineering, 16(3), p. 171-182. 
49Lee, K., Savadogo, O., Ishihara, A., Mitsushima, S., Kamiya, N., Ota, K. (2006). Methanol-Tolerant Oxygen Reduction Electrocatalysts Based on Pd-3d Transition Metal Alloys for Direct Methanol Fuel Cells. Journal of the Electrochemical Society, 153(1), p. A20-A24. 
50Savadogo, O., Varela, F.J.R. (2006). Palladium-Alloy Catalysts As Ethanol Tolerant Cathodes for Direct Alcohol Fuel Cell (DEFC) Applications. Proton Exchange Membrane Fuel Cells V, Honor of Supramaniam Srinivasan 208th Electrochemical Society Meeting, p. 247-254. 
51Savadogo, O., Varela, F.J.R. (2006). Ethanol-Tolerant Oxygen Reduction Reaction (ORR) Cathodes for Direct Ethanol Fuel Cell Applications. Proton Exchange Membrane Fuel Cells V, Honor of Supramaniam Srinivasan 208th Electrochemical Society Meeting, p. 331-338. 
52Varela, F.J.R., Savadogo, O. (2006). Catalytic Activity of Carbon-Supported Electrocatalysts for Direct Ethanol Fuel Cell Applications. Symposium Electrocatalysis, p. 330-340. 
53Shanian, A., Savadogo, O. (2005). An Analytical Hierarchy Process Model for Membrane Selection for Polymer Electrolyte Fuel Cell. 207th Meeting of the Electrochemical Society, p. 797. 
54Rajagopalan, S., Sawan, M., Savadogo, O. (2005). Electrochemical Synthesis and Characterisation of Polypyrrole/Polyelectrolyte Gel Blends: Toward Novel Bioelectrodes for Functional Electric Stimulation. 207th Meeting of the Electrochemical Society, p. 1462. 
55Savadogo, O. (2005). New Cathode Catalysts Based on Palladium-Alloys for the Oxygen Reduction Reaction in Acid Medium. 207th Meeting of the Electrochemical Society, p. 1565. 
56Varela, R., Savadogo, O. (2005). Real-Time Mass Spectrometric Analysis of the Anode Exhaust Gases of a Direct Propane Fuel Cell (DPFC). 207th Meeting of the Electrochemical Society, p. 796. 
57Tian, H., Savadogo, O. (2005). Effect of Silicotungstic Acid (Sta) on the Performance of a Polymer Electrolyte Fuel Cell (PEMFC) Based on Nafion Cast in Dimethylformamide. Fuel Cells, 5(3), p. 375-382. 
58Varela, F.J.R., Savadogo, O. (2005). Real-Time Mass Spectrometric Analysis of the Anode Exhaust Gases of a Direct Propane Fuel Cell. Journal of the Electrochemical Society, 152(9), p. A1755-A1762. 
59Fricoteaux, P., Savadogo, O. (2004). Quartz Microbalance Investigation of Nickel Electrodeposited in Sulphuric Acid With and Without Silicotungstic Acid (Sta). Journal of New Materials for Electrochemical Systems, 7(1), p. 59-63. 
60Ling, J., Savadogo, O. (2004). Comparison of Methanol Crossover Among Four Types of Nafion Membranes. Journal of the Electrochemical Society, 151(10), p. A1604-A1610. 
61Savadogo, O. (2004). Emerging Membranes for Electrochemical Systems - Part II. High Temperature Composite Membranes for Polymer Electrolyte Fuel Cell (PEFC) Applications. Journal of Power Sources, 127(1-2), p. 135-161. 
62Savadogo, O., Lee, K., Mitsushima, S., Kamiya, N., Ota, K.I. (2004). Investigation of Some New Palladium Alloys Catalysts for the Oxygen Reduction Reaction in an Acid Medium. Journal of New Materials for Electrochemical Systems, 7(2), p. 77-83. 
63Savadogo, O., Lee, K., Oishi, K., Mitsushima, S., Kamiya, N., Ota, K.I. (2004). New Palladium Alloys Catalyst for the Oxygen Reduction Reaction in an Acid Medium. Electrochemistry Communications, 6(2), p. 105-109. 
64Kadirgan, F., Savadogo, O. (2004). Methanol Crossover Through Modified Nafion Proton Exchange Membrane. Russian Journal of Electrochemistry, 40(11), p. 1141-1145. 
65Martin, E., Manceur, A., Polizu, S., Savadogo, O., Wu, M.H., Yahia, L. (2004). Corrosion Behavior of a Beta Ti-Mo-Nb-Al-V Alloy. SMST-2003: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, p. 417-423. 
66Cyr, Y., Savadogo, O. (2003). Effect of Anode Catalyst Composition on Direct Methanol and Direct Acetal Polymer Electrolyte Fuel Cells. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 356-357. 
67Jiang, Q., Savadogo, O. (2003). Development of Polymer Electrolyte Fuel Cells Based on Catalyzed Membrane: Effect of the Catalyst Ink Composition. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 332-333. 
68Jiang, Q., Savadogo, O. (2003). Polymer Electrolyte Fuel Cell Based on Catalyzed Nafion{Sup R} 117 Membrane: Effect of the Preparation Process. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 330-331. 
69Ling, J., Savadogo, O. (2003). Comparison of Crossover Behaviour of Methanol for Four Types of NafionR Membrane. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 341-342. 
70Ling, J., Savadogo, O. (2003). The Crossover of Ethanol Through a MEA Determined by Cyclic Voltammetry. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 346-348. 
71Ling, J., Savadogo, O. (2003). A Study on Crossover of Dimethyl Ether Through a Membrane-Electrode Assembly. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 343-345. 
72Longtin, G., Harvey, P., Napporn, T., Savadogo, O. (2003). Determination of Methanol Cross-Over Through MEA by Cyclic Voltammetry. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 338-340. 
73Mokrini, A., Napporn, T., Savadogo, O. (2003). Methanol Cross-Over of PEM Based on Sulfonated Commercial Polyimide Polymer. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 336-337. 
74Mokrini, A., Savadogo, O. (2003). Modification and Characterization of Some Commercial Polymers for PEM Fuel Cell Applications. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 349-350. 
75Mokrini, A., Savadogo, O. (2003). Polymer Electrolyte Fuel Cell Based on Sulfonated Commercial Polyimide Polymer. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 334-335. 
76Nguwuo, E., Savadogo, O. (2003). Elaboration and Characterization of CdS Films Deposited With Silicotungstic Acid by Chemical Bath Method on Silicon Substrate. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 166-167. 
77Rodriguez Varela, F.J., Savadogo, O. (2003). The Effect of Anode Catalysts on the Behaviour of Low Temperature Direct Propane Polymer Electrolyte Fuel Cells (DPFC). The Fifth International Symposium on New Materials for Electrochemical Systems, p. 358-361. 
78Rodriguez Varela, F.J., Savadogo, O. (2003). Operating Conditions of Low Temperature Direct Propane Polymer Electrolyte Fuel Cell. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 351-355. 
79Savadogo, O., Lee, K., Oishi, K., Mitsushima, S., Kamya, N., Ota, K.-I. (2003). New Family of Non Pt-Alloys for Oxygen Reduction Reaction for Polymer Electrolyte Fuel Cell Applications. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 367-371. 
80Savadogo, O., Oishi, K., Lee, K., Mitsushima, S., Kamya, N., Ota, K.-I. (2003). Oxygen Reduction Reaction on MEA Based Various Catalysts and Membranes. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 372-374. 
81Savadogo, O., Sasaya, Y., Mitsushima, S., Kamya, N., Ota, K.-I. (2003). Direct Commercial Alcohols Polymer Electrolyte Fuel Cells. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 375-377. 
82Savadogo, O., Shanian, A. (2003). A Multiple Attribute Decision Model for Membranes Selection of Polymer Electrolyte Fuel Cell. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 378-383. 
83Savadogo, O. (2003). Status on Emerging Membranes for Electrochemical Systems: Solid Polymer Electrolyte Membrane for Fuel Cell Systems. Chokogata Nenryo Denchi No Kaihatsu to Kongo No Tenbo, p. 88-135. 
84Tian, H., Savadogo, O. (2003). Polymer Electrolyte Fuel Cells Based on Recast Flemion{Sup R} With Dimethyl Formamide and Additives. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 365-366. 
85Tian, H., Savadogo, O. (2003). Polymer Electrolyte Fuel Cells Based on Recast Nafion{Sup R} 117 With Dimetly Formamide and Additives. The Fifth International Symposium on New Materials for Electrochemical Systems, p. 288-290. 
86Cisse, O., Savadogo, O., Wu, M., Yahia, L.'H. (2002). Effect of Surface Treatment of NiTi Alloy on Its Corrosion Behavior in Hanks' Solution. Journal of Biomedical Materials Research, 61(3), p. 339-345. 
87Savadogo, O. (2002). On the Concept of Synergetic Systems of Composite or Modified Materials and Their Electrocatalytic Properties. I. General Approach. International Journal of Hydrogen Energy, 27(2), p. 157-169. 
88Savadogo, O., Yang, X. (2002). Development of Pt-Alloy and Pt-Metal Oxide Mixed Anodes for Direct Acetal/Oxygen Polymer Electrolyte Membrane Fuel Cell (Dapemfc). Journal of New Materials for Electrochemical Systems, 5(1), p. 9-13. 
89Lejmi, N., Savadogo, O. (2001). The Effect of Heteropolyacids and Isopolyacids on the Properties of Chemically Bath Deposited CdS Thin Films. Solar Energy Materials and Solar Cells, 70(1), p. 71-83. 
90Savadogo, O., Ndzebet, E. (2001). Influence of SiW12O404- on the Electrocatalytic Behaviour of Pt--Co Alloy Supported on Carbon for Water Electrolysis in 3 M KOH Aqueous Solution. International Journal of Hydrogen Energy, 26(3), p. 213-218. 
91Savadogo, O., Varela, F.J.R. (2001). Low-Temperature Direct Propane Polymer Electrolyte Membranes Fuel Cell (DPFC). Journal of New Materials for Electrochemical Systems, 4(2), p. 93-97. 
92Savadogo, O., Yang, X. (2001). Electrooxidation of Acetals for Direct Hydrocarbon Fuel Cell Applications. Journal of Applied Electrochemistry, 31(7), p. 787-792. 
93Tazi, B., Savadogo, O. (2001). Effect of Various Heteropolyacids (Hpas) on the Characteristics of Nafion((R)) - Hpas Membranes and Their H-2 /O-2 Polymer Electrolyte Fuel Cell Parameters. Journal of New Materials for Electrochemical Systems, 4(3), p. 187-196. 
94Gebert, A., Lacroix, M., Savadogo, O., Schulz, R. (2000). Cathodes for Chlorate Electrolysis With Nanocrystalline Ti-Ru- Fe-O Catalyst. Journal of Applied Electrochemistry, 30(9), p. 1061-1067. 
95Savadogo, O. (2000). Status on the Development of Membranes for Polymer Electrolyte Fuel Cells (Pemfcs). Hydrogen Energy Progress. Proceedings, p. 756-765. 
96Savadogo, O., Xing, B. (2000). Hydrogen/Oxygen Polymer Electrolyte Membrane Fuel Cell (PEMFC) Based on Acid-Doped Polybenzimidazole (Pbi). Journal of New Materials for Electrochemical Systems, 3(4), p. 345-349. 
97Savadogo, O. (2000). Water Electrolysis in Acid Medium. Hemijska Industrija, 54(3), p. 95-101. 
98Thierry, B., Tabrizian, M., Savadogo, O., Yahia, L. (2000). Effects of Sterilization Processes on NiTi Alloy: Surfacecharacterization. Journal of Biomedical Materials Research. Part A, 49(1), p. 88-98. 
99Thierry, B., Tabrizian, M., Trépanier, C., Savadogo, O., Yahia, L.H. (2000). Effect of Surface Treatment and Sterilization Processes on Thecorrosion Behavior of NiTi Shape Memory Alloy. Journal of Biomedical Materials Research, 51(4), p. 685-693. 
100Tazi, B., Savadogo, O. (2000). Parameters of PEM Fuel-Cells Based on New Membranes Fabricated From Nafion, Silicotungstic Acid and Thiophene. Electrochimica Acta, 45(25-26), p. 4329-4339. 
101Xing, B., Savadogo, O. (2000). Hydrogen/Oxygen Polymer Electrolyte Membrane Fuel Cells (Pemfcs) Based on Alkaline-Doped Polybenzimidazole (Pbi). Electrochemistry Communications, 2(10), p. 697-702. 
102Xing, B., Savadogo, O. (2000). Hydrogen/Oxygen Polymer Electrolyte Full Cells (PEMFCs) Based on Alkaline-Doped Polybenzimidazole (PBI). Electrochemistry Communications, 2(10), p. 697-702. 
103Fricoteaux, P., Savadogo, O. (1999). Electrocatalytic Parameters of the Electrodeposition of Copper With Silicotungstic Acid (Sta). Electrochimica Acta, 44(17), p. 2927-2940. 
104Poulin, S., Ndzebet, E., Debrie, A., Savadogo, O., Sacher, E. (1999). The Cleaning and Thiolation of Commercial Titanium for Use in Dental Prostheses. Applied Surface Science, 143(1-4), p. 238-244. 
105Tabrizian, M., Thierry, B., Savadogo, O., Yahia, L.H. (1999). Surface Characteristics of Sterilized Electropolished NiTi Shape Memory Alloy As Biomaterials. Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials. Conference, p. 106-114. 
106Thierry, B., Tabrizian, M., Yahia, L.H., Savadogo, O. (1999). Effect of Sterilization Processes on the Ions Release of NiTi Alloy. International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications As Held at the 38th Annual Conference of Metallurgists of CIM, p. 373-382. 
107Xing, B.Z., Savadogo, O. (1999). The Effect of Acid Doping on the Conductivity of Polybenzimidazole (Pbi). Journal of New Materials for Electrochemical Systems, 2(2), p. 95-101. 
108Amouzegar, K., Savadogo, O. (1998). Electrocatalytic Hydrogenation of Dispersed Pt: Reaction Mechanism and Support Effect. Electrochimica Acta, 43(5-6), p. 503-508. 
109Bourges-Fricoteaux, F., Savadogo, O. (1998). Development of a Recycled Polymer Coating for Steel Corrosion Protection: an Adhesion Study. Journal of Coatings Technology, 70(884), p. 63-69. 
110Savadogo, O. (1998). Chemically and Electrochemically Deposited Thin Films for Solar Energy Materials. Solar Energy Materials and Solar Cells, 52(3-4), p. 361-388. 
111Savadogo, O. (1998). Emerging Membranes for Electrochemical Systems: (I) Solid Polymer Electrolyte Membranes for Fuel Cell Systems. Journal of New Materials for Electrochemical Systems, 1(1), p. 47-66. 
112Savadogo, O. (1998). Journées d'électrochimie : Applications of Chemical Engineering. Canadian Journal of Chemical Engineering, 76(6), p. 977. 
113Nanci, A., McKee, M., Sacher, E., Savadogo, O., Wuest, J. (1998). Modification of Implant Surface With Bioactive Conjugate for Imporved Integration. (Brevet Patent - US 5,824,651).
114Amouzegar, K., Savadogo, O. (1997). Electrocatalytic Hydrogenation of Phenol on Dispersed Pt: Effect of Metal Electrochemically Active Surface Area and Electrode Material. Journal of Applied Electrochemistry, 27(5), p. 539-542. 
115Briand, D., Delabouglise, G., Lecours, A., Currie, J.F., Labeau, M. (1997). Pd-Doped SnO2 Thin Films for CO Detection. Proceedings of the Second International Symposium on New Materials for Fuel-Cell and Modern Battery Systems II, p. 911-913. 
116Essalik, A., Marusic, J.C., Currie, J.F., Pelletier-Boudreau, E., Richard, E., Leclerc, S. (1997). Preparation and Characterization of Fully Integrated Gas Sensors: the Case of CO2 Sensor. Proceedings of the Second International Symposium on New Materials for Fuel-Cell and Modern Battery Systems II, p. 65-72. 
117Lafrenière, S., TamizhMani, G., Savadogo, O. (1997). Development of Low-Melting Point Molten Salt Electrolytes for Rechargeable Lithium-Aluminum/Iron-Disulfide Batteries. Second International Symposium on New Materials for Fuel-Cell and Modern Battery Systems II, p. 461-475. 
118Savadogo, O. (1997). Development of New Membranes for Electrochemical Systems. Electrochem. Process. Technol., Int. Forum, Electrolysis Chem. Ind., 11th, P83-112.
119Savadogo, O., Lacroix, M. (1997). Low Platinum-Ruthenium Alloy and Oxide-Based Electrocatalysts for Direct Methanol, Oxidation in Phosphoric Acid. Second International Symposium on New Materials for Fuel-Cell and Modern Battery Systems II, p. 872-880. 
120Tazi, B., Savadogo, O. (1997). New Cation Exchange Membranes Based on Nafion, Silicotungstic Acid and Thiophene. Proceedings of the Second International Symposium on New Materials for Fuel-Cell and Modern Battery Systems II, p. 864-871. 
121Savadogo, O. (1996). New Materials for Water Electrolysis and Photoelectrolysis. Eleventh World Hydrogen Energy Conference, p. 2065-2092. 
122Savadogo, O., Beck, P. (1996). Five Percent Platinum-Tungsten Oxide-Based Electrocatalysts for Phosphoric Acid Fuel Cell Cathodes. Journal of the Electrochemical Society, 143(12), p. 3842-3846. 
123Savadogo, O., Essalik, A. (1996). Effect of Platinum Particle Size on the Oxygen Reduction Reaction on 2% Pt-1% H2WO4 in Phosphoric Acid. Journal of the Electrochemical Society, 143(6), p. 1814-1821. 
124Sebastian, P.J., Martinez, M., Eapen, D., Solorza, O., Savadogo, O. (1996). Hydrogen Energy and Fuel-Cells - a Recent Research-and-Development Program in Mexico. International Journal of Hydrogen Energy, 21(7), p. 613-616. 
125Tremblay, E., Savadogo, O., Boily, S., Van Neste, A., Schulz, R. (1996). Study of the Structure and Electrochemical Properties of Mechanically Alloyed Ti-TiO Mixtures. Materials Science Forum, 225-227(2), p. 813-818. 
126Essalik, A., Amouzegar, K., Savadogo, O. (1995). Quantitative Determination of Dispersed Platinum in Carbon by Cyclic Voltammetry. Journal of Applied Electrochemistry, 25(4), p. 404-407. 
127Essalik, A., Savadogo, O., Ajersch, F. (1995). Chemical and Electrochemical Parameters for Oxygen Reduction on Pt-H2WO4/Carbon Electrodes in 99-Percent H3PO4. Journal of the Electrochemical Society, 142(5), p. 1368-1376. 
128Ndzebet, E., Savadogo, O. (1995). Study of the Hydrogen Evolution Reaction in a Basic Medium on Palladium Highly Dispersed in Graphite Electrodes Electro-Activated With SiW12O404- (STA). International Journal of Hydrogen Energy, 20(8), p. 635-640. 
129Savadogo, O. (1995). The Concept of Synergetic Materials in the Electrocatalysis of the Oxygen Reduction Reaction (ORR) in Fuel Cells. Proceedings of New Materials for Fuel Cell Systems, p. 544-576. 
130Savadogo, O. (1995). Pd-H2MoO4 Based Electrocatalysts for Alkaline Fuel Cell Anodes. New Materials for Fuel Cell Systems I : Proceedings of the First International Symposium on New Materials for Fuel Cell Systems, p. 212-222. 
131Savadogo, O., Essalik, A. (1995). Platinum-Heteropolyacid and Isopolyacid Based Electrocatalysts for Phosphoric Acid Fuel Cell Cathodes. Proceedings of New Materials for Fuel Cell Systems, p. 688-701. 
132Amouzegar, K., Savadogo, O. (1994). Electrocatalytic Hydrogenation of Phenol on Highly Dispersed Pt Electrodes. Electrochimica Acta, 39(4), p. 557-559. 
133Ndzebet, E., Savadogo, O. (1994). The Hydrogen Evolution Reaction in 3M KOH on Nickel Boride Electrodeposited With and Without SiW12O404-. International Journal of Hydrogen Energy, 19(8), p. 687-691. 
134Savadogo, O., Carrier, F., Forget, E. (1994). The Electrocatalytic Activity of the H.E.R. in Basic Medium on Iron or Nickel Electrodeposited With Heteropolyacids (HPAs): Effect of the Molecular Mass of the HPAs. International Journal of Hydrogen Energy, 19(5), p. 429-435. 
135Savadogo, O., Essalik, A. (1994). 2-Percent Platinum-H2wo4 Based Electrocatalysts for Phosphoric-Acid Fuel-Cell Cathode. Journal of the Electrochemical Society, 141(8), p. L92-L94. 
136Savadogo, O., Mandal, K.C. (1994). Fabrication of Low-Cost N-Sb2S3 /p-Ge Heterojunction Solar Cells. Journal of Physics. D,Applied Physics, 27(5), p. 1070-1075. 
137Savadogo, O., Mandal, K.C. (1994). Low Cost Schottky Barrier Solar Cells Fabricated on CdSe and Sb2S3 Films Chemically Deposited With Silicotungstic Acid. Journal of the Electrochemical Society, 141(10), p. 2871-2877. 
138Savadogo, O., Essalik, A. (1994). Electrocatalysts for Cathode of Hydrogen-Oxygen Fuel Cells. (Brevet Patent - US 5298343).

 

© École Polytechnique de Montréal
Bottin | Plan du site | Recherche | Conditions