Publications à Polytechnique

Ces données sont extraites du Répertoire des publications de l'École Polytechnique de Montréal. La liste ci-dessous contient seulement les publications auxquelles a participé le professeur ou le chercheur depuis son entrée en fonction à l’École. De plus, certaines publications ne sont pas dans cette liste, notamment les notes de cours et les rapports techniques internes plus d'information...
1	Mezghani, K., Furquan, S., Tabatabaei, S.H., Ajji, A. (2012). Effect of Blend Ratio of H-LDPE and LDPE on Tear Properties of Blown Films. International Polymer Processing, 27(3), p. 392-398.
2	Patel, J.D., Mighri, F., Ajji, A. (2012). Generalized Chemical Route to Develop Fatty Acid Capped Highly Dispersed Semiconducting Metal Sulphide Nanocrystals. Materials Research Bulletin, 47(8), p. 2016-2021.
3	Tabatabaei, S.H., Ajji, A. (2012). Crystal Structure and Orientation of Uniaxially and Biaxially Oriented Pla and Pp Nanoclay Composite Films. Journal of Applied Polymer Science, 124(6), p. 4854-4863.
4	Patel, J.D., Mighri, F., Ajji, A. (2012). Aminocaproic Acid Mixed Methanolic Lead-Thiourea Complex Precursor and Its Thermal Decomposition to Star-Shaped Lead Sulfide Crystals. Materials Letters, 74, p. 183-186.
5	Sadeghi, F., Ajji, A. (2012). Rheological, Physical, and Thermal Characterization of Single-Site Catalyst Based Polyethylenes for Seal Layer Applications. Polymer Engineering and Science, 52(5), p. 1089-1098.
6	Thi Thuy Duong Vu, Mighri, F., Trong-on Do, Ajji, A. (2012). Synthesis of Capped TiO2 Nanocrystals of Controlled Shape and Their Use With Meh-Ppv to Develop Nanocomposite Films for Photovoltaic Applications. Journal of Nanoscience and Nanotechnology, 12(3), p. 2815-2824.
7	Patel, J.D., Mighri, F., Ajji, A., Chaudhuri, T.K. (2012). Morphology and Size Control of Lead Sulphide Nanoparticles Produced Using Methanolic Lead Acetate Trihydrate-Thiourea Complex Via Different Precipitation Techniques. Materials Chemistry and Physics, 132(2-3), p. 747-755.
8	Pakravan, M., Heuzey, M.-C., Ajji, A. (2012). Core-Shell Structured Peo-Chitosan Nanofibers by Coaxial Electrospinning. Biomacromolecules, 13(2), p. 412-421.
9	Hadjizadeh, A., Ajji, A., Bureau, M.N. (2011). Nano/Micro Electro-Spun Polyethylene Terephthalate Fibrous Mat Preparation and Characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), p. 340-351.
10	Tabatabaei, S.H., Ajji, A. (2011). Orientation, Mechanical, and Optical Properties of Poly (Lactic Acid) Nanoclay Composite Films. Polymer Engineering and Science, 51, p. 2151-2158.
11	Tabatabaei, S.H., Ajji, A. (2011). Structure-Orientation-Properties Relationships for Polypropylene Nanoclay Composite Films. Journal of Plastic Film and Sheeting, 27(1-2), p. 87-115.
12	Tabatabaei, S.H., Ajji, A. (2011). Crystal Structure and Orientation of Uniaxially and Biaxially Oriented PLA and PP Nanoclay Composite Films. Journal of Applied Polymer Science, 124(6), p. 4854-4863.
13	Pakravan, M., Heuzey, M.-C., Ajji, A. (2011). A Fundamental Study of Chitosan/PEO Electrospinning. Polymer, 52(21), p. 4813-4824.
14	Tabatabaei, S.H., Ajji, A. (2011). Effect of Initial Crystalline Morphology on Properties of Polypropylene Cast Films. Journal of Plastic Film and Sheeting, 27, p. 223-233.
15	Najarzadeh, Z., Ajji, A. (2011). Seal Layer Materials Characterization in Terms of Crystallinity and Rheology. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, v. 2, p. 1488-1492.
16	Silverwood, R.J., Ajji, A. (2011). Development of an Antibacterial Film for Application in the Food Industry. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, v. 3, p. 2349-2352.
17	Moreno, M.J., Ajji, A., Mohebbi-Kalhori, D., Rukhlova, M., Hadjizadeh, A., Bureau, M.N. (2011). Development of a Compliant and Cytocompatible Micro-Fibrous Polyethylene Terephthalate Vascular Scaffold. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 97 B(2), p. 201-214.
18	Dimitrievska, S., Maire, M., Diaz-Quijada, G.A., Robitaille, L., Ajji, A., Yahia, L., Moreno, M., Merhi, Y., Bureau, M.N. (2011). Low Thrombogenicity Coating of Nonwoven PET Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(4), p. 493-502.
19	Fang, H., Mighri, F., Ajji, A., Cassagnau, P., Elkoun, S. (2011). Flow Behavior in a Corotating Twin-Screw Extruder of Pure Polymers and Blends: Characterization by Fluorescence Monitoring Technique. Journal of Applied Polymer Science, 120(4), p. 2304-2312.
20	Dimitrievska, S., Petit, A., Doillon, C.J., Epure, L., Ajji, A., Yahia, L., Bureau, M.N. (2011). Effect of Sterilization on Non-Woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromolecular Bioscience, 11(1), p. 13-21.
21	Hadjizadeh, A., Ajji, A., Bureau, M.N. (2011). Nano/Micro Electro-Spun Polyethylene Terephthalate Fibrous Mat Preparation and Characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), p. 340-351.
22	Patel, J., Mighri, F.A.A. (2011). Rapid Synthesis of Highly Dispersed and Stable Oleic Acid Capped Lead Sulphide Nanoparticles. Advanced Science Letters, 4(11), p. 3644-3648.
23	Patel, J., Mighri, F.A.A. (2011). Simple Non-Aqueous Fabrication Route for Oleic Acid Capped Luminescent Cadmium Sulphide Quantum Dots at Relatively Low Temperature. Soft Nanoscience Letters, 1(3), p. 61-65.
24	Tabatabaei, S.H.A.A., Ghasemi, H. (2011). Effect of Random and Block Copolyporpylenes on Structure an Dproperties of Uniaxially and Biaxially Oriented PP Films. International Polymer Processing, 26(1), p. 82-90.
25	Hadjizadeh, A., Ajji, A., Bureau, M.N. (2010). Preparation and Characterization of NaOH Treated Micro-Fibrous Polyethylene Terephthalate Nonwovens for Biomedical Application. Journal of the Mechanical Behavior of Biomedical Materials, 3(8), p. 574-583.
26	Stoeffler, K., Dubois, C., Ajji, A., Guo, N., Boismenu, F., Skorobogatiy, M. (2010). Fabrication of All-Polymeric Photonic Bandgap Bragg Fibers Using Rolling of Coextruded PS/PMMA Multilayer Films. Polymer Engineering and Science, 50(6), p. 1122-1127.
27	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2010). Rheological Long-Chain Properties of Blends of Linear and Branched Polypropylenes. Polymer Engineering and Science, 50(1), p. 191-199.
28	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), p. 191-199.
29	Sadeghi, F., Tabatabaei, S.H., Ajji, A., Carreau, P.J. (2010). Properties of Uniaxially Stretched Polypropylene Films: Effect of Drawing Temperature and Random Copolymer Content. Canadian Journal of Chemical Engineering, 88(6), p. 1091-1098.
30	Mazinani, S., Ajji, A., Dubois, C. (2010). Structure and Properties of Melt-Spun PET/MWCNT Nanocomposite Fibers. Polymer Engineering and Science, 50(10), p. 1956-1968.
31	Sadeghi, F., Tabatabei, H., Carreau, P., Ajji, A. (2010). Structure and Properties of PP Films: Effect of Cast Film Process Conditions, MDO Stretching and Blending With a Random PP. International Polyolefins Conference 2010: Finding Value in Today's Business Environment.
32	Mazinani, S., Ajji, A., Dubois, C. (2010). Fundamental Study of Crystallization, Orientation, and Electrical Conductivity of Electrospun PET/Carbon Nanotube Nanofibers. Journal of Polymer Science, Part B: Polymer Physics, 48(19), p. 2052-2064.
33	Tabatabaei, S.H., Carreau, P., Ajji, A. (2010). Cast Plastic Films, Microporous Membranes, and Method of Preparation Thereof.
34	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2009). Effect of Processing on the Crystalline Orientation, Morphology, and Mechanical Properties of Polypropylene Cast Films and Microporous Membrane Formation. Polymer, 50(17), p. 4228-4240.
35	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2009). Structure and Properties of MDO Stretched Polypropylene. Polymer, 50(16), p. 3981-3989.
36	Cigana, P., Parent, L., Tabatabei, H., Sadeghi, F., Carreau, P., Ajji, A. (2009). Process, Structure and Properties of Cast and MDO Stretched Films of HDPE, PP and Blends of Random and Linear PPS. International Polyolefins Conference 2009, p. 11.
37	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2009). Microporous Membranes Obtained From PP/HDPE Multilayer Films by Stretching. Journal of Membrane Science, 345(1-2), p. 148-159.
38	Mazinani, S., Ajji, A., Dubois, C. (2009). Structure and Prperties of Melt-Spun Pet/Mwcnt Nanocomposite Fibers. 67th Annual Technical Conference of the Society of Plastics Engineers, v. 4, p. 2306-2311.
39	Parent, L., Cigana, P., Ajji, A., Carreau, P.J. (2009). Effect of Machine Direction Orientation Conditions on Structure and Properties of Hdpe Films. 67th Annual Technical Conference of the Society of Plastics Engineers, v. 4, p. 2342-2344.
40	Bureau, M.N., Maire, M., Diaz-Quijada, G., Robitaille, L., Ajji, A., Merhi, Y. (2009). Nonwoven Pet Fiber Structures for Vascular Graft Applications. 67th Annual Technical Conference of the Society of Plastics Engineers, v. 5, p. 2962-2966.
41	Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Dubois, C., Skorobogatiy, M. (2009). Colorful Photonic Band Gap Fiber-Based Textiles. Conference on Lasers and Electro-Optics and 2009 Conference on Quantum Electronics and Laser Science Conference.
42	Sadeghi, F., Tabatabaei, S.H., Ajji, A., Carreau, P.J. (2009). Effect of PVDF Characteristics on Extruded Film Morphology and Porous Membranes Feasibility by Stretching. Journal of Polymer Science, Part B: Polymer Physics, 47(12), p. 1219-1229.
43	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2009). Rheological and Thermal Properties of Blends of a Long-Chain Branched Polypropylene and Different Linear Polypropylenes. Chemical Engineering Science, 64(22), p. 4719-4731.
44	Fatahi, S., Ajji, A., Lafleur, P.G. (2009). Correlation Between Different Microstructural Parameters and Tensile Modulus of Various Polyethylene Blown Films. Polymer Engineering and Science, 47(9), p. 1430-1440.
45	Mazinani, S., Ajji, A., Dubois, C. (2009). Morphology, Structure and Properties of Conductive PS/CNT Nanocomposite Electrospun Mat. Polymer, 50(14), p. 3329-3342.
46	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2008). Microporous Membranes Obtained From Polypropylene Blend Films by Stretching. Journal of Membrane Science, 325(2), p. 772-782.
47	Gauvreau, B., Guo, N., Schicker, K., Stoeffler, K., Boismenu, F., Ajji, A., Wingfield, R., Dubois, C., Skorobogatiy, M. (2008). Color-Changing and Color-Tunable Photonic Bandgap Fiber Textiles. Optics Express, 16(20), p. 15677-15693.
48	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2008). Rheology and Properties of Blends of Two Linear and a Long-Chain Branched Polypropylenes. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008, v. 4, p. 2340-2345.
49	Sadeghi, F., Ajji, A., Carreau, P.J. (2008). Microporous Membranes Obtained From Polypropylene Blends With Superior Permeability Properties. Journal of Polymer Science. Part B, Polymer Physics, 46(2), p. 148-157.
50	Dimitrievska, S., Petit, A., Ajji, A., Bureau, M.N., Yahia, L. (2008). Biocompatibility of Novel Polymer-Apatite Nanocomposite Fibers. Journal of Biomedical Materials Research. Part A, 84A(1), p. 44-53.
51	Bani-Yaghoub, M., Tremblay, R.G., Ajji, A., Nzau, M., Gangaraju, S., Chitty, D., Zurakowski, B., Sikorska, M. (2008). Neuroregenerative Strategies in the Brain: Emerging Significance of Bone Morphogenetic Protein 7 (BMP7). Biochemistry and Cell Biology, 86, p. 361-369.
52	Mazinani, S., Dubois, C., Ajji, A. (2008). Production and Characterization of Electrospun PET/MWCNT Nanocomposite Nanofiber. The Fiber Society 2008 Fall Meeting and Technical Conference.
53	Dubois, C., Skorobogatiy, M., Ajji, A., Stoeffler, K. (2008). Fabrication of 1D Photonic Crystals Based on Hollow/Solid-Core All-Polymer Optic Fibers. The Fiber Society 2008 Fall Meeting and Technical Conference.
54	Laforgue, A., Robitaille, L., Ajji, A. (2008). Strategies for the Fabrication of Conductive Fibers Using Electrospinning and Melt-Spinning Techniques. The Fiber Society 2008 Fall Meeting and Technical Conference.
55	Trudel-Boucher, D., Ajji, A., Denault, J. (2008). Experimental Investigation on the Consolidation of Polypropylene-Clay Nanocomposites. The Fiber Society 2008 Fall Meeting and Technical Conference.
56	Pakravanlonbani, M., Heuzey, M.C., Ajji, A. (2008). Preparation of Chitosan-Based Nonwoven Mat Using Electrospinning Process. The Fiber Society 2008 Fall Meeting and Technical Conference.
57	Bureau, M., Moreno, M., Ajji, A. (2008). Endothelial/Smooth Muscle Cells Growth into Nonwoven Fiber Vascular Grafts. The Fiber Society 2008 Fall Meeting and Technical Conference.
58	Mazinani, S., Ajji, A., Dubois, C. (2008). Rheological/Morphological Study of PS/CNT Nanocomposite Electrospun Fibers. 15th International Congress on Rheology.
59	Gendron, R., Ajji, A., Dufour, J., Dimitrievska, S., Bureau, M.N. (2008). Cell Attachment on New Fibrous Pet Structures for Vascular Grafts Under Controlled Shear Stress: Experimental Set-Up and Methodology. 15th International Congress on Rheology.
60	Tabatabaei, S.H., Carreau, P.J., Ajji, A. (2008). Microporous Membranes Obtained From Polypropylene Blend Films by Stretching. Polymer Processing International Meeting.
61	Sadeghi, F., Ajji, A. (2008). Study of Structure of PVDF-Nanoclay Films : Effect of Preparation Conditions and Clay. Polymer Processing International Meeting.
62	Ajji, A. (2008). Nano and Micro Fibers for Conductive and Piezoelectric Applications. Polymer Processing International Meeting.
63	Ajji, A. (2008). Nano and Micro Fibers for Conductive Applications. Ambiance 2008.
64	Bureau, M., Moreno, M., Ajji, A. (2008). Endothelial/Smooth Muscle Cells Growth into Nonwoven Fiber Vascular Grafts. International Congress on Biomaterials.
65	Ajji, A., Laforgue, A., Robitaille, L. (2008). Nano and Micro Fibers for Conductive and Piezoelectric Applications. The Fiber Society 2008 Spring Meeting.
66	Trudel-Boucher, D., Ajji, A., Denault, J. (2008). Experimental Investigation on the Consolidation of Polypropylene-Clay Nanocomposites Fibers. SPE-ANTEC 2008.
67	Ajji, A., Zhang, X. (2008). PE//PP Multilayer and Nanocomposite Films: Some Process-Structure-Performance Relationships. SPE-Polyolefins Conference.
68	Fang , H., Mighri , F., Ajji , A. (2007). Fluorescence Quenching of Phenanthrene and Anthracene by Maleic Anhydride and N-Octadecenylsuccinic Anhydride in Solution and in Bulk Polypropylene. Polymer Engineering and Science, 47(2), p. 192-199.
69	Fatahi, S., Ajji, A., Lafleur, P.G. (2007). Correlation Between Different Microstructural Parameters and Tensile Modulus of Various Polyethylene Blown Films. Polymer Engineering and Science, 47(9), p. 1430-1440.
70	Fatahi, S., Ajji, A., Lafleur, P.G. (2007). Investigation on the Structure and Properties of Different Pe Blown Films. International Polymer Processing, 22(4), p. 334-345.
71	Fang, H.X., Mighri, F., Ajji, A. (2007). Miscibility Characterization of SMA/SAN and SMA/PMMA Blends by Differential Scannine Calorimetry and Fluorescence Techniques. Journal of Applied Polymer Science, 105(5), p. 2955-2962.
72	Sadeghi, F., Ajji, A., Carreau, P.J. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), p. 1170-1178.
73	Sadeghi, F., Ajji, A., Carreau, P.J. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), p. 62-71.
74	Dimitrievska, S., Petit, A., Ajji, A., Bureau, N., Yahia, L. (2007). Biocompatibility of a Novel Bioactive Polymer-Apatite Nanocomposite. Tissue Engineering, 13(4), p. 879.
75	Lafrogue, A., Robitaille, L., Mokrini, A., Ajji , A. (2007). Fabrication and Characterization of Ionic Conducting Nanofibers. Macromolecular Materials and Engineering, 292(12), p. 1229-1236.
76	Ajji, A., Denault, J., Côté, D., Bureau, M., Trudel-Boucher, D. (2007). Polypropylene Nanocomposite Fibers : Structure and Some Applications. International Polymer Processing, 22(4), p. 368-374.
77	Dimitrievska, S., Bureau, N., Ajji, A., Petit, A., Yahia, L. (2007). Biocompatibility of a Novel Bioactive Polymer-Apatite Nanocomposite. 53rd Annual Meeting of the Orthopaedic Research Society.
78	Moreno, M., Ajji, A., Bureau, N.M. (2007). New Fibrous PET Structures for Vascular Grafts : Effect of Fiber Structure on Endothelial and Smooth Muscle Cell Attachment and Growth. 7th International Symposium on Frontiers in Biomedical Polymers.
79	Moreno, M., Ajji, A. (2007). New Fibrous PET Structures for Vascular Grafts : Effect of Fiber Structure on Endothelial and Smooth Muscle Cell Attachment and Growth. International Symposium on Polymeric Materials for Regenerative Medicine 2007.
80	Bani, M., Ajji, A. (2007). Repairing the Injured Brain With Ex Vivo-Engineered Neuroscaffolds. International Symposium on Polymeric Materials for Regenerative Medicine 2007.
81	Dimitrievska, S., Ajji, A., Bureau, M.N., Petit, A., Yahia, L. (2007). Novel Bioactive Polymer-Apatite Nanocomposite Fibres and Their Biocompatibility. International Symposium on Polymeric Materials for Regenerative Medicine 2007.
82	Maire, M., Ajji, A., Bureau, M.N., Robitaille, L., Yahia, L. (2007). Hemocompatibility of New Fibrous PET Structures With and Without Surface Modification. International Symposium on Polymeric Materials for Regenerative Medicine 2007.
83	Sadeghi, F., Ajji, A. (2007). Various Porous Structures for Biomedical Applications. International Symposium on Polymeric Materials for Regenerative Medicine 2007.
84	Daly, H.B., Cole, K.C., Ajji, A., Nguyen, K.T., Sanschagrin, B. (2002). Molecular Orientation in Injection-Blow-Molded Bottles. ANTEC 2002. Proceedings of the 60th SPE Annual Technical Conference, p. $$ Paper 405.