Publications à Polytechnique

Ces données sont extraites du Répertoire des publications de l'École Polytechnique de Montréal. La liste ci-dessous contient seulement les publications auxquelles a participé le professeur ou le chercheur depuis son entrée en fonction à l’École. De plus, certaines publications ne sont pas dans cette liste, notamment les notes de cours et les rapports techniques internes plus d'information...
1	Ravati, S., Favis, B.D. (2011). 3D Porous Polymeric Conductive Material Prepared Using LbL Deposition. Polymer, 52(3), p. 718-731.
2	Bhadane, P.A., Tsou, A.H., Cheng, J., Ellul, M., Favis, B.D. (2011). Morphology and Continuity Development in Highly Reactive Nanoscale Polymer Blends. Polymer, 52(22), p. 5107-5117.
3	Li, G., Sarazin, P., Favis, B.D. (2011). Biodegradation of Thermoplastic Starch and Its Blends With Poly(Lactic Acid) and Polyethylene: Influence of Morphology. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, v. 1, p. 204-210.
4	Virgilio, N., Favis, B.D. (2011). Self-Assembly of Janus Composite Droplets at the Interface in Quaternary Immiscible Polymer Blends. Macromolecules, 44(15), p. 5850-5856.
5	Le Corroller, P., Favis, B.D. (2011). Effect of Viscosity in Ternary Polymer Blends Displaying Partial Wetting Phenomena. Polymer, 52(17), p. 3827-3834.
6	Li, G., Sarazin, P., Orts, W.J., Imam, S.H., Favis, B.D. (2011). Biodegradation of Thermoplastic Starch and Its Blends With Poly(Lactic Acid) and Polyethylene: Influence of Morphology. Macromolecular Chemistry and Physics, 212(11), p. 1147-1154.
7	Virgilio, N., Sarazin, P., Favis, B.D. (2011). Ultraporous Poly(l-Lactide) Scaffolds Prepared With Quaternary Immiscible Polymer Blends Modified by Copolymer Brushes at the Interface. Polymer, 52(7), p. 1483-1489.
8	Li, G., Favis, B.D. (2010). Morphology Development and Interfacial Interactions in Polycaprolactone/ Thermoplastic Starch Blends. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, v. 1, p. 520-524.
9	Ravati, S., Favis, B.D. (2010). Morphological States for a Ternary Polymer Blend Demonstrating Complete Wetting. Polymer, 51(20), p. 4547-4561.
10	Taghizadeh, A., Favis, B.D. (2010). Effect of Heat and Shear on the Gelatinization of Thermoplastic Starch With Various Plasticizers. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, v. 1, p. 611-616.
11	Ravati, S., Favis, B.D. (2010). Low Percolation Threshold Conductive Device Derived From a Five-Component Polymer Blend. Polymer, 51(16), p. 3669-3684.
12	Virgilio, N., Sarazin, P., Favis, B.D. (2010). Towards Ultraporous Poly(L-Lactide) Scaffolds From Quaternary Immiscible Polymer Blends. Biomaterials, 31(22), p. 5719-5728.
13	Virgilio, N., Desjardins, P., L'Esperance, G., Favis, B.D. (2010). Modified Interfacial Tensions Measured in Situ in Ternary Polymer Blends Demonstrating Partial Wetting. Polymer, 51(6), p. 1472-1484.
14	Mihai, M., Huneault, M.A., Favis, B.D. (2010). Rheology and Extrusion Foaming of Chain-Branched Poly(Lactic Acid). Polymer Engineering and Science, 50(3), p. 629-642.
15	Li, G., Favis, B.D. (2010). Morphology Development and Interfacial Interactions in Polycaprolactone/ Thermoplastic-Starch Blends. Macromolecular Chemistry and Physics, 211(3), p. 321-333.
16	Arroyo, O.H., Huneault, M.A., Favis, B.D., Bureau, M.N. (2010). Processing and Properties of PLA/Thermoplastic Starch/Montmorillonite Nanocomposites. Polymer Composites, 31(1), p. 114-127.
17	Mihai, M., Huneault, M.A., Favis, B.D. (2009). Crystallinity Development in Cellular Poly (Lactic Acid) in the Presence of Supercritical Carbon Dioxide. 67th Annual Technical Conference of the Society of Plastics Engineers, v. 1, p. 31-35.
18	Taguet, A., Huneault, M.A., Favis, B.D. (2009). Interface/Morphology Relationships in Polymer Blends With Thermoplastic Starch. Polymer, 50(24), p. 5733-5743.
19	Virgilio, N., Desjardins, P., L'Esperance, G., Favis, B.D. (2009). In Situ Measure of Interfacial Tensions in Ternary and Quaternary Immiscible Polymer Blends Demonstrating Partial Wetting. Macromolecules, 42(19), p. 7518-7529.
20	Xiang, Z., Sarazin, P., Favis, B.D. (2009). Controlling Burst and Final Drug Release Times From Porous Polylactide Devices Derived From Co-Continuous Polymer Blends. Biomacromolecules, 10(8), p. 2053-2066.
21	Mihai, M., Huneault, M.A., Favis, B.D. (2009). Crystallinity Development in Cellular Poly(Lactic Acid) in the Presence of Supercritical Carbon Dioxide. Journal of Applied Polymer Science, 113(5), p. 2920-2932.
22	Virgilio, N., Marc-Aurele, C., Favis, B.D. (2009). Novel Self-Assembling Close-Packed Droplet Array at the Interface in Ternary Polymer Blends. Macromolecules, 42(9), p. 3405-3416.
23	Tsou, A.H., Favis, B.D., Hara, Y., Bhadane, P.A., Kirino, Y. (2009). Reactive Compatibilization in Brominated Poly(Isobutylene-Co-p- Methylstyrene) and Polyamide Blends. Macromolecular Chemistry and Physics, 210(5), p. 340-348.
24	Bhadane, P.A., Tsou, A.H., Cheng, J., Favis, B.D. (2008). Morphology Development and Interfacial Erosion in Reactive Polymer Blending. Macromolecules, 41(20), p. 7549-7559.
25	Li, G., Sarazin, P., Favis, B.D. (2008). The Relationship Between Starch Gelatinization and Morphology Control in Melt-Processed Polymer Blends With Thermoplastic Starch. Macromolecular Chemistry and Physics, 209(10), p. 991-1002.
26	Salehi, P., Sarazin, P., Favis, B.D. (2008). Porous Devices Derived From Co-Continuous Polymer Blends As a Route for Controlled Drug Release. Biomacromolecules, 9(4), p. 1131-1138.
27	Sarazin, P., Li, G., Orts, W.J., Favis, B.D. (2008). Binary and Ternary Blends of Polylactide, Polycaprolactone and Thermoplastic Starch. Polymer, 49(2), p. 599-609.
28	El Ouassini, A., Saucier, A., Marcotte, D., Favis, B.D. (2008). A Patchwork Approach to Stochastic Simulation: a Route Towards the Analysis of Morphology in Multiphase Systems. Chaos Solitons & Fractals, 36(2), p. 418-436.
29	Virgilio, N., Desjardins, P., L'Esperance, G., Favis, B.D. (2008). The Newmann Triangle Method to Measure Interfacial Tensions in Immiscible Polymer Blends Using Focused Ion Beam and Atomic Force Miscroscopy. 24th Annual Meeting of Polymer Processing Society.
30	Zhang, J.H., Ravati, S., Virgilio, N., Favis, B.D. (2007). Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends. Macromolecules, 40(25), p. 8817-8820.
31	Salehi, P., Sarazin, P., Favis, B.D. (2007). Model Porous Polymer Blends As a Route for Controlled Release. PMSE Preprints, 97, p. 165-166.
32	Favis, B.D., Sarazin, P., Roy, X. (2007). Porous Nanosheath Networks, Method of Making and Uses Thereof. (Brevet Patent - US PCT International ; WO 200753955 A1).
33	Ravati, S., Virgilio, N., Jianhing, Z., Favis, B.D. (2007). Structured Multiple Percolated Polymer Blends. Proceedings Conference. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., p. 211-212.
34	Virgilio, N., Desjardins, P., L'Esperance, G., Favis, B.D. (2007). Novel Self-Assembling Pearl Necklace Microstructure Induced by Partial Wetting in Ternary Polymer Blends. Proceedings Conference. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., p. 205-206.
35	Tsou, A.H., Favis, B.D., Hara, Y., Bhadane, P.A., Kirino, Y. (2007). Reactive Compatibilization in Polyamide and Bimsm Blends. 172nd ACS Rubber Division Meeting - Fall 2007, p. 23.
36	Mihai, M., Huneault, M.A., Favis, B.D., Li, H.B. (2007). Extrusion Foaming of Semi-Crystalline Pla and Pla/Thermoplastic Starch Blends. Macromolecular Bioscience, 7(7), p. 907-920.
37	Virgilio, N., Marc-Aurele, C., Favis, B.D. (2007). Novel Self-Assembling Morphologies in Multicomponent Polymer Blends. ANTEC 2007, v. 1, p. 347-351.
38	Mihai, M., Huneault, M.A., Favis, B.D. (2007). Foaming of Polystyrene/Thermoplastic Starch Blends. Journal of Cellular Plastics, 43(3), p. 215-236.
39	Sarazin, P., Favis, B.D. (2007). Stability of the Co-Continuous Morphology During Melt Mixing for Poly(Epsilon-Caprolactone)/Polystyrene Blends. Journal of Polymer Science. Part B, Polymer Physics, 45(7), p. 864-872.
40	Favis, B.D., Yuan, Z., Riscanu, D. (2006). Thermoplastic Starch and Synthetic Polymer Blends for Use in Making Films or Molded Articles. (Brevet Patent - US WO 2006116861 A1).
41	Roy, X., Sarazin, P., Favis, B.D. (2006). Ultraporous Nanosheath Materials by Layer-by-Layer Deposition Onto Continuous Polymer-Blend Templates. Advanced Materials, 18(8), p. 1015-1019.
42	Bhadane, P.A., Virgilio, N., Favis, B.D., Champagne, M.F., Huneault, M.A., Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AIChE Journal, 52(10), p. 3411-3420.
43	Bhadane, P.A., Champagne, M.F., Huneault, M.A., Tofan, F., Favis, B.D. (2006). Erosion-Dependant Continuity Development in High Viscosity Ratio Blends of Very Low Interfacial Tension. Journal of Polymer Science. Part B, Polymer Physics, 44(14), p. 1919-1929.
44	Bhadane, P.A., Champagne, M.F., Huneault, M.A., Tofan, F., Favis, B.D. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), p. 2760-2771.
45	Sarazin, P., Virgilio, N., Favis, B.D. (2006). Influence of the Porous Morphology on the in Vitro Degradation and Mechanical Properties of Poly(L-Lactide) Disks. Journal of Applied Polymer Science, 100(2), p. 1039-1047.
46	Roy, X., Sarazin, P., Favis, B.D. (2006). Ultraporous Nanosheath Materials by Layer-by-Layer Deposition Onto Co-Continuous Polymer-Blend Templates. Advanced Materials, 18(8), p. 1015-1019.
47	Yuan, Z., Favis, B.D. (2006). Influence of the Efficacy of Interfacial Modification on the Coarsening of Cocontinuous PS/HDPE Blends During Quiescent Annealing. Journal of Polymer Science. Part B, Polymer Physics, 44(4), p. 711-721.
48	Sarazin, P., Huneault, M.A., Orts, W., Favis, B.D. (2005). Blends of Polylactide With Thermoplastic Starch. ANTEC 2005. Proceedings of the 63rd SPE Annual Conference, p. $$ PDF 101992, CD-ROM, 012.
49	Gang, L., Sarazin, P., Zhenhua, Y., Favis, B.D. (2005). Morphology and Rheology of Polycaprolactone/Thermoplastic Starch Blends. ANTEC 2005. Proceedings of the 63rd SPE Annual Conference, p. $$ PDF 101589, CD-ROM, 012.
50	Bhadane, P., Favis, B., Huneault, M., Champagne, M., Tofan, F. (2005). Erosion and Continuity Development in High Viscosity Ratio Epdm/Pp Blends. ANTEC 2005. Proceedings of the 63rd SPE Annual Conference, p. $$ PDF 101553, CD-ROM, 012.
51	Mihai, M.H., Huneault, M.A., Favis, B.D. (2005). Foams Extruded From Polystyrene / Thermoplastic Starch Blends. ANTEC 2005. Proceedings of the 63rd SPE Annual Conference, p. $$ PDF 101545, CD-ROM, 012.
52	Sarazin, P., Favis, B.D. (2005). Influence of Temperature-Induced Coalescence Effects on Co-Continuous Morphology in Poly(Epsilon-Caprolactone)/Polystyrene Blends. Polymer, 46(16), p. 5966-5978.
53	Tchomakov, K.P., Favis, B.D., Huneault, M.A., Champagne, M.F., Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), p. 300-309.
54	Virgilio, N., Favis, B.D., Pepin, M.F., Desjardins, P., L'esperance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), p. 2368-2375.
55	Yuan, Z.H., Favis, B.D. (2005). Coarsening of Immiscible Co-Continuous Blends During Quiescent Annealing. AIChE Journal, 51(1), p. 271-280.
56	Favis, B.D., Rodriguez, F., Ramsay, B.A. (2005). Method of Making Polymer Compositions Containing Thermoplastic Starch. (Brevet Patent - US 6844380).
57	Riscanu, D., Favis, B.D., Feng, C.Y., Matsuura, T. (2004). Thin-Film Membranes Derived From Co-Continuous Polymer Blends: Preparation and Performance. Polymer, 45(16), p. 5597-5609.
58	Rodriguez-Gonzales, F.J., Ramsay, B.A., Favis, B.D. (2004). Rheological and Thermal Properties of Thermoplastic Starch With High Glycerol Content. Carbohydrate Polymer, 58(2), p. 139-147.
59	Sarazin, P., Roy, X., Favis, B.D. (2004). Controlled Preparation and Properties of Porous Poly(L-Lactide) Obtained From a Co-Continuous Blend of Two Biodegradable Polymers. Biomaterials, 25(28), p. 5965-5978.
60	Tchomakov, K.P., Favis, B.D., Huneault, M.A., Champagne, M.F., Tofan, F. (2004). Composite Droplets With Core/Shell Morphologies Prepared From HDPE/PS/PMMA Ternary Blends by Twin-Screw Extrusion. Polymer Engineering and Science, 44(4), p. 749-759.
61	Yuan, Z., Favis, B.D. (2004). Macroporous Polylactide of Controlled Pore Size Derived From the Annealing of Co-Continuous Polystyrene/Polylactide Blends. Biomaterials, 25(11), p. 2161-2170.
62	Favis, B.D., Rodriguez, F., Ramsay, B.A. (2003). Polymer Compositions Containing Thermoplastic Starch. (Brevet Patent - US 6605657).
63	Reignier, J., Favis, B.D. (2003). Core-Shell Structure and Segregation Effects in Composite Droplet Polymer Blends. AICHE Journal, 49(4), p. 1014-1023.
64	Reignier, J., Favis, B.D. (2003). On the Presence of a Critical Shell Volume Fraction Leading to Pseudo-Pure Droplet Behavior in Composite Droplet Polymer Blends. Polymer, 44(18), p. 5061-5066.
65	Reignier, J., Favis, B.D., Heuzey, M.C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-Type Polymer Blends. Polymer, 44(1), p. 49-59.
66	Rodriguez-Gonzalez, F.J., Ramsay, B.A., Favis, B.D. (2003). High Performance LDPE/Thermoplastic Starch Blends: A Sustainable Alternative to Pure Polyethylene. Polymer, 44(5), p. 1517-1526.
67	Rodriguez-Gonzalez, F.J., Virgilio, N., Ramsay, B.A., Favis, B.D. (2003). Influence of Melt Drawing on the Morphology of One- and Two-Step Processed Ldpe/Thermoplastic Starch Blends. Advances in Polymer Technology, 22(4), p. 297-305.
68	Sarazin, P., Favis, B.D. (2003). Morphology Control in Co-Continuous Poly(L-Lactide)/Polystyrene Blends: a Route Towards Highly Structured and Interconnected Porosity in Poly(L-Lactide) Materials. Biomacromolecules, 4(6), p. 1669-1679.
69	Bhadane, P.A., Favis, B.D., Champagne, M.F., Huneault, M.A., Tofan, F. (2002). Effect of Viscosity Ratio on Co-Continuity for Ethylene-Propylene-Diene Terpolymer/Polypropylene Blends. ANTEC : Annual Technical Conference - Society of Plastics Engineers, v. 60, p. 1385-1389.
70	Jianming, L., Ma, P.L., Favis, B.D. (2002). The Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends. Macromolecules, 35(6), p. 2005-2016.
71	Li, J., Favis, B.D. (2002). Strategies to Measure and Optimize the Migration of the Interfacial Modifier to the Interface in Immiscible Polymer Blends. Polymer, 43(18), p. 4935-4945.
72	Ma, P.L., Favis, B.D., Champagne, M.F., Huneault, M.A., Tofan, F. (2002). Effect of Dynamic Vulcanization on the Microstructure and Performance of Polyethylene Terephthalate/Elastomer Blends. Polymer Engineering and Science, 42(10), p. 1976-1989.
73	Marin, N., Favis, B.D. (2002). Co-Continuous Morphology Development in Partially Miscible Pmma/Pc Blends. Polymer, 43(17), p. 4723-4731.
74	Tchomakov, K.P., Favis, B.D., Huneault, M.A., Champagne, M.F., Tofan, F. (2002). Subinclusion Morphologies in HDPE/PS/PMMA Ternary Blends Prepared by Twin Screw Extrusion. ANTEC : Annual Technical Conference - Society of Plastics Engineers, v. 60, p. 1345-1349.
75	Yuan, Z., Favis, B.D. (2002). Annealing of a Co-Continuous Polystyrene/Polylactide Blend and Its Influence on the Morphology. ANTEC 2002. Proceedings of the 60th SPE Annual Technical Conference, p. $$ Paper 140.
76	Gonzalez-Nunez, R., Arellano, M., Moscoso, F.J., Gonzalez-Romero, V.M., Favis, B.D. (2001). Determination of a Limiting Dispersed Phase Concentration for Coalescence in Pa6/Hdpe Blends Under Extensional Flow. Polymer, 42(12), p. 5485-5489.
77	Gonzalez-Nunez, R., Padilla, H., De Kee, D., Favis, B.D. (2001). Barrier Properties of Polyamide-6/High Density Polyethylene Blends. Polymer Bulletin, 46(4), p. 323-330.
78	Li, J., Favis, B.D. (2001). Characterizing Co-Continuous High Density Polyethylene/Polystyrene Blends. Polymer, 42(11), p. 5047-5053.
79	Li, J., Ma, P.L., Favis, B.D. (2001). Role of the Blend Interface Type on Morphology in Co-Continous Polymer Blends. PPS-17, p. 16-21.
80	Ma, P.L., Favis, B.D., Champagne, M.F., Huneault, M.A., Tofan, F. (2001). Effect of Compatibilization and Dynamic Vulcanization on the Microstructure and Performance of Polyethylene Terephthalate/Elastomer Blends. ANTEC : Annual Technical Conference - Society of Plastics Engineers, v. 59, p. 2244-2248.
81	Marin, N., Favis, B.D. (2001). Co-Continuuity Morphology Development in Partially Miscible Binary Polymer Blends. PPS-17, p. 24-28.
82	Reignier, J., Favis, B.D. (2001). Composite Drop Viscosity Ratio Effect on the Morphology of Hdpe/Ps/Pmma Ternary Blends. Antec 2001.Conference Proceedings, p. 321.
83	Rodriguez-Gonzalez, F., Favis, B.D. (2001). Study of the Rheological and Thermal Properties of Thermoplastic Starch. PPS-17, p. 98-105.
84	Rodriguez-Gonzalez, F.J., Virgilio, N., Ramsay, B.A., Favis, B.D. (2001). Melt Drawing of Ldpe/Thermoplastic Starch Blends. Antec 2001.Conference Proceedings, p. 334.
85	Sararin, P., Favis, B.D. (2001). Interfacial Tension, Phase Inversion and Co-Continuity in Poly(l-Lactide) Polystyrene Blends. Antec 2001.Conference Proceedings, p. 319.
86	Weidong, W., Hua Liang, Favis, B.D., Schreiber, H.P. (2001). Surface Modification Strategies for Multicomponent Polymer Systems. III : Effect of Diblock Copolymer-Modified Rutile on the Morphology and Mechanical Properties of LLDPE/PVC Blends. Journal of Applied Polymer Science, 81(8), p. 1891-1901.
87	Chapleau, N., Favis, B.D., Carreau, P.J. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), p. 6695-6698.
88	Everaert, V., Groeninckx, G., Pionteck, J., Favis, B.D., Aerts, L., Moldenaers, P., Mewis, J. (2000). Miscible PS/PPE Compounds: an Alternative for Blend Phase Morphology Studies? Influence of the PPE Content on the Surface Tension of PS/PPE and on the Interfacial Tension in PP/(PS/PPE) and Pom/(PS/PPE) Blends. Polymer, 41(3), p. 1011-1025.
89	Gonzalez-Nunez, R., Moscoso, F.J., Gonzalez-Romero, V.M., Favis, B.D. (2000). Determination of a Limit in Particle Concentration for Coalescence in Pa6/Hdpe Blends Under Extensional Flow. Antec 2000.Conference Proceedings, p. 676.
90	Lepers, J.C., Favis, B.D., Kent, S.L. (2000). Interface-Property Relationships in Biaxially Stretched PP-PET Blends. Polymer, 41(5), p. 1937-1946.
91	Li, J., Ma, P., Favis, B.D. (2000). Co-Continuous Homopolymer/Copolymer Blends. ANTEC : Annual Technical Conference. Society of Plastics Engineers, v. 58, p. 1484-1488.
92	Liang, H., Xu, R., Favis, B.D., Schreiber, H.P. (2000). Interfacial Tension and Acid-Base Approaches to Polymer Interactions. Journal of Polymer Science. Part B, Polymer Physics, 38(16), p. 2096-2104.
93	Martin, P., Carreau, P.J., Favis, B.D., Djerome, R. (2000). Investigating the Morphology/Rheology Inter-Relationships in Immiscible Polymer Blends. Journal of Rheology, 44(3), p. 568-583.
94	Mekhilef, N., Carreau, P.J., Favis, B.D., Martin, P., Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B, Polymer Physics, 38(10), p. 1359-1368.
95	Reignier, J., Favis, B.D. (2000). Controlling Complex Morphologies in Immiscible Polymer Blends. PPS-16, p. 444-445.
96	Reignier, J., Favis, B.D. (2000). Control of the Subinclusion Microstructure in HDPE/PS/PMMA Ternary Blends. Macromolecules, 33(19), p. 6998-7008.
97	Gonzalez, F.J.R., Ramsay, B.A., Favis, B.D. (1999). Low Density Polyethylene/Thermoplastic Starch Blends: Effect of Glycerol Content and LDPE Concentration on Morphology and Tensile Properties in the Dual Phase Continuity Region. ANTEC : Annual Technical Conference. Society of Plastics Engineers, v. 2, p. 2770-2774.
98	Lepers, J.C., Favis, B.D. (1999). Interfacial Tension Reduction and Coalescence Suppression in Compatibilized Polymer Blends. AICHE Journal, 45(4), p. 887-895.
99	Lepers, J.C., Favis, B.D., Lacroix, C. (1999). The Influence of Partial Emulsification on Coalescence Suppression and Interfacial Tension Reduction in PP/PET Blends. Journal of Polymer Science. Part B, Polymer Physics, 37(9), p. 939-951.
100	Lepers, J.-C., Favis, B.D., Kent, S.L. (1999). Study of the Morphology and the Tensile Mechanical Properties of Biaxially Oriented PET/PP Blends. Imaging and Image Analysis Applications for Plastics, p. 119-126.
101	Li, J., Favis, B.D. (1999). Characterising Co-Continuous Polyethylene/Polystyrene Blends. Antec '99. 57th Annual Technical Conference, v. 2, p. 1960-1964.
102	Liang, H., Favis, B.D., Yu, Y.S., Eisenberg, A. (1999). Correlation Between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of Lldpe and Pvc. Macromolecules, 32(5), p. 1637-1642.
103	Liang, H., Xu, R.J., Favis, B.D., Schreiber, H.P. (1999). Surface Modification Strategies for Multicomponent Polymer Systems - VI: Acid-Base Interactions As a Strategy for Interfacial Modification in Immiscible Polymer Blends. Polymer, 40(15), p. 4419-4423.
104	Odje, S., Vu-Khanh, T., Cigana, P., Favis, B.D. (1999). Influence of Triblock Copolymer Interfacial Modifiers on Fracture Behavior of Polystyrene/Ethylene-Propylene Rubber Blends. Polymer Engineering and Science, 39(7), p. 1265-1278.
105	Polizu, S., Favis, B.D., Vu-Khanh, T. (1999). Morphology-Interface-Property Relationships in Polystyrene/Ethylene-Propylene Rubber Blends. 2. Influence of Areal Density and Interfacial Saturation of Diblock and Triblock Copolymer Interfacial Modifiers. Macromolecules, 32(10), p. 3448-3456.
106	Reignier, J., Favis, B.D. (1999). Control of the Su-Inclusion Microstructure in HDPE/PS/PMMA Ternary Blends. Polyblends 99, Industrial Materials Institue.
107	Reignier, J., Favis, B.D. (1999). Sub-Inclusion Morphologies in Hdpe/Ps/Pmma Ternary Blend. Antec '99. Volume II. Conference Proceedings, p. 2816-2819.
108	Bourry, D., Favis, B.D. (1998). Cocontinuity and Phase Inversion in HDPE/PS Blends: Influence of Interfacial Modification and Elasticity. Journal of Polymer Science. Part B, Polymer Physics, 36(11), p. 1889-1899.
109	Bourry, D., Favis, B.D. (1998). Morphology Development in a Polyethylene/Polystyrene Binary Blend During Twin-Screw Extrusion. Polymer, 39(10), p. 1851-1856.
110	Chapleau, N., Favis, B.D., Carreau, P.J. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of Polymer Science. Part B, Polymer Physics, 36(11), p. 1947-1958.
111	Cigana, P., Favis, B.D. (1998). Relative Efficacy of Diblock and Triblock Copolymers for a Polystyrene/Ethylene-Propylene Rubber Interface. Polymer, 39(15), p. 3373-3378.
112	Jack, K.S., Natansohn, A., Jiahu, W., Favis, B.D., Cigana, P. (1998). Determination of Domain Sizes in Compatibilized Polystyrene(Ps)-(Ethylene-Propylene Rubber)(Epr) Blends by Measurements of Proton Spin Diffusion. Chemistry of Materials, 10(5), p. 1301-1308.
113	Chapleau, N., Favis, B.D., Carreau, P.J. (1997). Morphology of Polyamide/Polyethylene Blends Under Extensional Flow: Effect of Compatibilization. Proceedings of the 1997 55th Annual Technical Conference, ANTEC, p. 1695-1699.
114	Cigana, P., Benoit, V., Tremblay, A., Favis, B.D. (1997). Detection of Block Copolymer Micelles in Compatibilized Polymer Blends: An Indirect Method. Proceedings of the 1997 55th Annual Technical Conference, ANTEC, p. 1527-1529.
115	Cigana, P., Favis, B.D., Albert, C., Vu-Khanh, T. (1997). Morphology-Interface-Property Relationships in Polystyrene/Ethylene-Propylene Rubber Blends. 1. Influence of Triblock Copolymer Interfacial Modifiers. Macromolecules, 30(14), p. 4163-4169.
116	Favis, B.D., Cigana, P., Matos, M., Tremblay, A. (1997). Factors Influencing the Efficacy of an Interfacial Modifier for the Interface in an Immiscible Polymer Blend. Canadian Journal of Chemical Engineering, 75(2), p. 273-281.
117	Gaona-Torres, J., Gonzalez-Nunez, R., Favis, B.D. (1997). Influence of Melt-Drawn Ratio and Composition on Drop Coalescence in Nylon 6/Hdpe Blends. Antec 97. Volume II. Conference Proceedings, p. 2597-2601.
118	Lacasse, C., Favis, B.D. (1997). Effects of Extruder Type, Compatibilizer Level and Composition on the Morphology and Impact Strength of a Polyamide-6/ABS Blend. Proceedings of the 1997 International Symposium on Polymer Blends, Alloys and Filled Systems, POLYBLENDS, p. 448-453.
119	Legros, A., Carreau, P.J., Favis, B.D., Michel, A. (1997). Morphology Modification by Interfacial Chemical Reaction in a Polyester/Ethylene Vinyl Acetate/Polyethylene Blend. Polymer, 38(20), p. 5085-5089.
120	Lepers, J.-C., Favis, B.D., Kent, S.L. (1997). Study of Morphology and Tensile Mechanical Properties of Biaxially Oriented Petp/Pp Blends. Antec 97. Volume II. Conference Proceedings, p. 1788-1792.
121	Lepers, J.-C., Favis, B.D., Kent, S.L. (1997). Study of the Morphology and the Tensile Mechanical Properties of Biaxially Oriented PET/PP Blends. Proceedings of the 1997 55th Annual Technical Conference, ANTEC, p. 1788-1792.
122	Lepers, J.-C., Favis, B.D., Tabar, R.J. (1997). The Relative Role of Coalescence and Interfacial Tension in Controlling Dispersed Phase Size Reduction During the Compatibilization of Polyethylene Terephthalate/Polypropylene Blends. Journal of Polymer Science. Part B, Polymer Physics, 35(14), p. 2271-2280.
123	Liang, H., Favis, B.D. (1997). Surface Modification Strategies for Multicomponent Polymer Systems. 2. Study of the Interfacial Tension and Morphology of Linear Low-Density Polyethylene/Poly(Vinyl Chloride) Blends. Industrial & Engineering Chemistry Research, 36(4), p. 1211-1217.
124	Liang, H., Favis, B.D., Yu, Y., Eisenberg, A. (1997). Surface Modification Strategies for Multi-Component Polymer Systems, IV: Block Copolymers As Interfacial Modifiers for Blends of LLDPE and PVC. Proceedings of the 1997 55th Annual Technical Conference, ANTEC, p. 1764-1768.
125	Mamat, A., Vukhanh, T., Cigana, P., Favis, B.D. (1997). Impact Fracture Behavior of Nylon-6/Abs Blends. Journal of Polymer Science. Part B, Polymer Physics, 35(16), p. 2583-2592.
126	Matos, M.E., Rosales, C., Mueller, A.J., Favis, B.D. (1997). Polystyrene/Polypropylene Blends: Morphology/Interphase Relationship, Rheological and Calorimetric Behaviour. Antec 97. Volume II. Conference Proceedings, p. 2552-2556.
127	Mekhilef, N., Favis, B.D., Carreau, P.J. (1997). Morphological Stability, Interfacial Tension, and Dual-Phase Continuity in Polystyrene-Polyethylene Blends. Journal of Polymer Science. Part B, Polymer Physics, 35(2), p. 293-308.
128	St-Pierre, N., Favis, B.D., Ramsay, B.A., Ramsay, J.A., Verhoogt, H. (1997). Processing and Characterization of Thermoplastic Starch/Polyethylene Blends. Polymer, 38(3), p. 647-655.
129	Bourry, D., Favis, B.D. (1996). Development of the Morphology of an Immiscible Binary Blend During Twin-Srew Extrusion. 12th Annual Meeting of the Polymer Processing Society, p. 111-112.
130	Cigana, P., Favis, B.D., Jerome, R. (1996). Diblock Copolymers As Emulsifying Agents in Polymer Blends: Influence of Molecular Weight, Architecture, and Chemical Composition. Journal of Polymer Science. Part B, Polymer Physics, 34(9), p. 1691-1700.
131	Fellahi, S., Favis, B.D., Fisa, B. (1996). Morphological Stability in Injection-Moulded High-Density Polyethylene/Polyamide-6 Blends. Polymer, 37(13), p. 2615-2626.
132	Gonzalez-Nunez, R., Chan Man Fong, C.F., Favis, B.D., De Kee, D. (1996). Deformation of Drops in Extensional Viscoelastic Flow. Journal of Applied Polymer Science, 62(10), p. 1627-1634.
133	Gonzalez-Nunez, R., De Kee, D., Favis, B.D. (1996). The Influence of Coalescence on the Morphology of the Minor Phase in Melt-Drawn Polyamide-6/HDPE Blends. Polymer, 37(21), p. 4689-4693.
134	Lacroix, C., Bousmina, M., Carreau, P.J., Favis, B.D., Michel, A. (1996). Properties of PETG/EVA Blends: 1. Viscoelastic, Morphological and Interfacial Properties. Polymer, 37(14), p. 2939-2947.
135	Leclair, A., Favis, B.D. (1996). Role of Interfacial Contact in Immiscible Binary Polymer Blends and Its Influence on Mechanical Properties. Polymer, 37(21), p. 4723-4728.
136	Lomellini, P., Matos, M., Favis, B.D. (1996). Interfacial Modification of Polymer Blends : the Emulsification Curve : 2. Predicting the Critical Concentration of Interfacial Modifier From Geometrical Considerations. Polymer, 37(25), p. 5689-5694.
137	Mekhilef, N., Carreau, P.J., Favis, B.D. (1996). Viscoelastic Properties of Polystyrene-Polyethylene Blends: Interfacial Tension Measurements Using the Breaking Thread Method and Predictions With an Emulsion Model. 12th Annual Meeting of the Polymer Processing Society, p. 215-216.
138	St-Pierre, N., Favis, B.D., Ramsay, B.A., Ramsay, J.A., Verghoogt, H. (1996). Thermoplastic Starch/Polyethylene Blends. 12th Annual Meeting of the Polymer Processing Society, p. 207-208.
139	Verhoogt, H., Ramsay, B.A., Favis, B.D., Ramsay, J.A. (1996). The Influence of Thermal History on the Properties of Poly(3-Hydroxyburate-Co-12%-3-Hydroxyvalerate). Journal of Applied Polymer Science, 61(1), p. 87-96.
140	Bourry, D., Favis, B.D. (1995). Co-Continuity and Phase Inversion in HDPE/PS Blends: the Role of Interfacial Modification. Proceedings of the 53rd Annual Technical Conference, p. 2001-2009.
141	Chapleau, N., Favis, B.D., Carreau, P.J. (1995). Evaluation of the Interfacial Tension Using the Breaking Thread Method: Effect of Temperature and of Interfacial Modifier. Polymeric Materials Science and Engineering, 73, p. 18-19.
142	Chapleau, N., Favis, B.D., Carreau, P.J. (1995). Evaluation of the Interfacial-Tension Using the Breaking Thread Method - Effect of Temperature and Ot Interfacial Modifier. Abstracts of Papers of the American Chemical Society, 210, p. 10.
143	Cigana, P., Favis, B.D., Jerome, R. (1995). Effect of Molecular Weight and Architecture of the Compatibilizing Agent on the Emulsification of Polystyrene/Ethylene-Propylene Rubber Blends. Polymeric Materials Science and Engineering, 73, p. 16-17.
144	Fellahi, S., Favis, B.D., Fisa, B. (1995). Tensile Dilatometry of Injection-Moulded HDPE/PA6 Blends. Journal of Materials Science, 30(21), p. 5522-5530.
145	Fellahi, S., Fisa, B., Favis, B.D. (1995). Weldline Strength in Injection Molded HDPE/PA6 Blends: Influence of Interfacial Modification. Journal of Applied Polymer Science, 57(11), p. 1319-1332.
146	Fellahi, S., Meddad, A., Fisa, B., Favis, B.D. (1995). Weldlines in Injection-Molded Parts: a Review. Advances in Polymer Technology, 14(3), p. 169-195.
147	Gonzalez-Nunez, R., DeKee, D., Favis, B.D. (1995). Experimental Study of Deformation and Coalescence Effects of the Minor Phase in Immiscible Polymer Blends. Antec '95. Vol.II. Conference Proceedings, p. 1730-1735.
148	Lepers, J.-C., Favis, B.D. (1995). Morphology/Interface Relationships in Polyester/Polyolefin Blends. Proceedings of the 53rd Annual Technical Conference, p. 1588-1592.
149	Matos, M., Favis, B.D., Lomellini, P. (1995). Interfacial Modification of Polymer Blends--the Emulsification Curve. I. Influence of Molecular Weight and Chemical Composition of the Interfacial Modifier. Polymer, 36(20), p. 3899-3907.
150	Mekhilef, N., Favis, B.D., Carreau, P.J. (1995). Morphological Stability of Polystyrene Polyethylene Blends. Proceedings of the 53rd Annual Technical Conference, p. 1572-1579.
151	St-Pierre, N., Favis, B.D., Ramsay, B.A., Ramsay, J.A., Verhoogt, H. (1995). Thermoplastic Starch/Polyethylene Blends. Proceedings of the 1995 SPE Regional Technical Conference on Polymer Alloys and Blends, p. 471-479.
152	Tremblay, A., Tremblay, S., Favis, B.D., Selmani, A., L'Espérance, G. (1995). Locating the Modifier in a Polymer Blend by Electron Energy-Loss Spectroscopy. Macromolecules, 28(13), p. 4771-4773.
153	Tremblay, A., Tremblay, S., Favis, B.D., Selmani, A., L'Espérance, G. (1995). Spectroscopic Analyses of Compatibilized Polymer Blends. Proceedings of the 53rd Annual Technical Conference, p. 1559-1563.
154	Verhoogt, H., St-Pierre, N., Truchon, F.S., Ramsay, B.A., Favis, B.D., Ramsay, J.A. (1995). Blends Containing Poly(Hydroxybutyrate-Co-12%-Hydroxyvalerate) and Thermoplastic Starch. Canadian Journal of Microbiology, 41(SUP1), p. 323-328.
155	Verhoogt, H., Truchon, F.S., Favis, B.D., St-Pierre, N., Ramsay, B.A. (1995). Morphology and Mechanical Properties of Blends Containing Thermoplastic Starch and P(HB-Co-12%-HV). Proceedings of the 53rd Annual Technical Conference, p. 2028-2032.
156	Bélanger, C., Cielo, P., Favis, B.D., Patterson, W.I., Utracki, L.A. (1994). Polarized Light Scattering Approach for Simulated Polymer Blend Morphology Characterization. Polymer Engineering and Science, 34, p. 1589.
157	Favis, B.D., Matos, M., Tremblay, A., Lepers, J.-C. (1994). Interface/Morphology Relationships in Polymer Blends. Polymer Processing Society, European Regional Meeting, p. 117-118.
158	Favis, B.D. (1994). Phase Size/Interface Relationships in Polymer Blends: The Emulsification Curve. Polymer, 35(7), p. 1552-1555.
159	Fellahi, S., Favis, B.D., Fisa, B. (1994). Tensile Dilatometry of Injection Molded HDPE/PA6 Blends. Proceedings of the 52nd Annual Technical Conference ANTEC 94, p. 1584-1586.
160	Fellahi, S., Fisa, B., Favis, B.D. (1994). Weldline Strength Evaluation in Injection Molded HDPE/PA6 Blends. Proceedings of the 52nd Annual Technical Conference ANTEC 94, p. 637-642.
161	Legros, A., Carreau, P.J., Favis, B.D., Michel, A. (1994). Reactive Compatibilization of Polyester/Vinyl Acetate Copolymer Blends: Rheological, Morphological and Mechanical Properties. Polymer, 35(4), p. 758-764.
162	Matos, M., Lomellini, P., Favis, B.D. (1994). Influence of Some Molecular Parameters of the Interfacial Modifier on the Emulsification of Polystyrene/Ethylene-Propylene Rubber Blends. Proceedings of the 52nd Annual Technical Conference ANTEC 94, p. 1517-1519.
163	Verhoogt, H., Ramsay, B.A., Favis, B.D. (1994). Polymer Blends Containing Poly(3-Hydroxyalkanoate)s. Polymer, 35(24), p. 5155-5169.