Rafiner la recherche

Filtrer par site

Filtrer par langue

Filtrer par type de contenu

Réinitialiser la recherche

Résultats de la recherche (1499)

(X) Prix (X) Communiqués officiels (X) publication

Pages

Laboratoire de structures de fibres et de composites avancés

Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach

threedimensionalmicrostructuresofswcntpolymernanocompositesbyamicrofluidicinfiltrationapproach CONFERENCE 2007 Laberge Lebel, L., Aïssa, B., El Khakani, M. A., &amp; Therriault, D. (décembre 2007). <em><a href="https://publications.polym ...

https://www.polymtl.ca/labsfca/content/three-dimensional-microstructures-swcnt-polymer-nanocomposites-microfluidic-infiltration-approach

Laboratoire de structures de fibres et de composites avancés

Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens

effectofstampformingparametersandbendradiusonthemechanicalperformanceofcurvedbeamcarbonfiberpolyphenylenesulfidespecimens JOURNAL 2016 Jamin, T., Dubé, M., &amp; Laberge Lebel, L. (2016). <a href="https://publications.polymtl.ca/34370/"&g ...

https://www.polymtl.ca/labsfca/content/effect-stamp-forming-parameters-and-bend-radius-mechanical-performance-curved-beam-carbon

Laboratoire de structures de fibres et de composites avancés

Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites

improvedadhesionbetweenstainlesssteelheatingelementandppspolymerinresistanceweldingofthermoplasticcomposites JOURNAL 2020 Rohart, V., Laberge Lebel, L., &amp; Dubé, M. (2020). <a href="https://publications.polymtl.ca/45166/">Improved a ...

https://www.polymtl.ca/labsfca/content/improved-adhesion-between-stainless-steel-heating-element-and-pps-polymer-resistance-welding

Laboratoire de structures de fibres et de composites avancés

Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints

effectsofenvironmentalconditionsonthelapshearstrengthofresistanceweldedcarbonfibrethermoplasticcompositejoints JOURNAL 2020 Rohart, V., Laberge Lebel, L., &amp; Dubé, M. (2020). <a href="https://publications.polymtl.ca/45684/">Effects ...

https://www.polymtl.ca/labsfca/content/effects-environmental-conditions-lap-shear-strength-resistance-welded-carbon-fibrethermoplastic

Laboratoire de structures de fibres et de composites avancés

Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints

influenceoffreezethawcyclingonthemechanicalperformanceofresistanceweldedcarbonfibrepolyphenylenesulphidecompositejoints JOURNAL 2020 Rohart, V., Laberge Lebel, L., &amp; Dubé, M. (2020). <a href="https://publications.polymtl.ca/45758/"> ...

https://www.polymtl.ca/labsfca/content/influence-freezethaw-cycling-mechanical-performance-resistance-welded-carbon-fibrepolyphenylene

Laboratoire de structures de fibres et de composites avancés

Automated braiding of non-axisymmetric structures using an iterative inverse solution with angle control

automatedbraidingofnonaxisymmetricstructuresusinganiterativeinversesolutionwithanglecontrol JOURNAL 2021 Gondran, M., Abdin, Y., Gendreau, Y., Khameneifar, F., &amp; Laberge Lebel, L. (2021). <a href="https://publications.polymtl.ca/46961/&quo ...

https://www.polymtl.ca/labsfca/content/automated-braiding-non-axisymmetric-structures-using-iterative-inverse-solution-angle-control

Laboratoire de structures de fibres et de composites avancés

Fastening aerospace structures with carbon fiber/poly ether ether ketone composite rivets

fasteningaerospacestructureswithcarbonfiberpolyetheretherketonecompositerivets CONFERENCE 2021 Absi, C., Alsinani, N. A., &amp; Laberge Lebel, L. (mai 2021). <em><a href="https://publications.polymtl.ca/47147/">Fastening aerospac ...

https://www.polymtl.ca/labsfca/content/fastening-aerospace-structures-carbon-fiberpoly-ether-ether-ketone-composite-rivets

Laboratoire de structures de fibres et de composites avancés

Effect of cooling temperature on deconsolidation and pulling forces in a thermoplastic pultrusion process

effectofcoolingtemperatureondeconsolidationandpullingforcesinathermoplasticpultrusionprocess JOURNAL 2021 Alsinani, N., Ghaedsharaf, M., &amp; Laberge Lebel, L. (2021). <a href="https://publications.polymtl.ca/47178/">Effect of cooling ...

https://www.polymtl.ca/labsfca/content/effect-cooling-temperature-deconsolidation-and-pulling-forces-thermoplastic-pultrusion-process

Laboratoire de structures de fibres et de composites avancés

Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation

thermoplasticpultrusionscoolingtemperatureeffectsonpullingforcesanddeconsolidation CONFERENCE 2019 Alsinani, N., &amp; Laberge Lebel, L. (septembre 2019). <em><a href="https://publications.polymtl.ca/47179/">Thermoplastic pultrus ...

https://www.polymtl.ca/labsfca/content/thermoplastic-pultrusions-cooling-temperature-effects-pulling-forces-and-deconsolidation

Laboratoire de structures de fibres et de composites avancés

Effect of length variation of flax/polypropylene pellets produced by multi-die pultrusion on the quality of injection molded product

effectoflengthvariationofflaxpolypropylenepelletsproducedbymultidiepultrusiononthequalityofinjectionmoldedproduct CONFERENCE 2018 Alsinani, N. A., &amp; Laberge Lebel, L. (septembre 2018). <em><a href="https://publications.polymtl.ca/471 ...

https://www.polymtl.ca/labsfca/content/effect-length-variation-flaxpolypropylene-pellets-produced-multi-die-pultrusion-quality-injection

Pages