Répertoire des expertises

Achiche, Sofiane

Répertoire des expertises

Achiche, Sofiane

Répertoire des expertises

Publications par type

Article de revue (85) Communication de conférence (110) Livre Chapitre de livre (3) Brevet (1) Rapport (1) Thèse (2) Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Sofiane Achiche (202)

Articles de revue (85)
- 2024
  - Ma, Y., Achiche, S., Pomey, M.-P., Paquette, J., Adjtoutah, N., Vicente, S., Engler, K., Laymouna, M., Lessard, D., Lemire, B., Asselah, J., Therrien, R., Osmanlliu, E., Zawati, M. H., Joly, Y., & Lebouché, B. (2024). Adapting and Evaluating an AI-Based Chatbot Through Patient and Stakeholder Engagement to Provide Information for Different Health Conditions: Master Protocol for an Adaptive Platform Trial (the MARVIN Chatbots Study). JMIR Research Protocols, 13, 54668.
  - Qin, Y., Duan, S., Achiche, S., Zhang, Y., & Cao, Y. (2024). Advanced hybrid empirical mode decomposition, convolutional neural network and long short-term memory neural network approach for predicting grain pile humidity based on meteorological inputs. Journal of Stored Products Research, 109, 102427 (10 pages).
  - Lecompte, O., Achiche, S., & Mohebbi, A. (2024). A Review of Proprioceptive Feedback Strategies for Upper-Limb Myoelectric Prostheses. IEEE Transactions on Medical Robotics and Bionics, 3407532 (10 pages).
  - Cio, Y.-S. L.-K., Beltrame, G., Vadean, A., Mohebbi, A., & Achiche, S. (2024). Concurrent product layout design optimization and dependency management using a modified NSGA-III approach. Frontiers in Mechanical Engineering, 10, 1178501.
  - Rochefort-Beaudoin, T., Vadean, A., Achiche, S., & Aage, N. (2024). From density to geometry: Instance segmentation for reverse engineering of optimized structures. Engineering Applications of Artificial Intelligence, 141, 109732.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2024). Horngear and carrier design for braiding tailorable composite preforms. CIRP Journal of Manufacturing Science and Technology, 50, 228-237.
  - Laymouna, M., Ma, Y., Lessard, D., Engler, K., Therrien, R., Schuster, T., Vicente, S., Achiche, S., Haj, M. N. E., Lemire, B., Kawaiah, A., & Lebouché, B. (2024). Needs-assessment for an artificial intelligence-based Chatbot for pharmacists in HIV care: results from a knowledge–attitudes–practices survey. Healthcare, 12(16), 1661-1661.
  - Ma, Y., Achiche, S., Tu, G., Vicente, S., Lessard, D., Engler, K., Lemire, B., chatbots Patient Expert Committee, M. A. R. V. I. N., Laymouna, M., de Pokomandy, A., Cox, J., & Lebouché, B. (2024). The first AI-based Chatbot to promote HIV self-management: A mixed methods usability study. HIV Medicine, 13720 (23 pages).
- 2023
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for detecting carriers' collisions in braiding machines. International Journal of Advanced Manufacturing Technology, 126(5-6), 2337-2348.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for preventing carriers' collisions in variable path braiding machines. International Journal of Advanced Manufacturing Technology, 126(9-10), 4581-4589.
  - Samadi, B., Raison, M., Mahaudens, P., Detrembleur, C., & Achiche, S. (2023). A preliminary study in classification of the severity of spine deformation in adolescents with lumbar/thoracolumbar idiopathic scoliosis using machine learning algorithms based on lumbosacral joint efforts during gait. Computer Methods in Biomechanics and Biomedical Engineering, 26(11), 1341-1352.
  - Gamache, J.-F., Vadean, A., Capo, M., Rochefort-Beaudoin, T., Dodane, N., & Achiche, S. (2023). Complexity-driven layout exploration for aircraft structures. Design Science, 9, 34 pages.
  - Gesta, A., Achiche, S., & Mohebbi, A. (2023). Design considerations for the development of lower limb pediatric exoskeletons a literature review. IEEE Transactions on Medical Robotics and Bionics, 5(4), 768-779.
  - Samadi, B., Raison, M., Mahaudens, P., Detrembleur, C., & Achiche, S. (2023). Development of machine learning algorithms to identify the Cobb angle in adolescents with idiopathic scoliosis based on lumbosacral joint efforts during gait (case study). Electronic & Electrical Engineering Research Studies. Pattern Recognition and Image Processing Series, 1(1), 30 pages.
  - Leblond-Ménard, C., & Achiche, S. (2023). Non-Intrusive Real Time Eye Tracking Using Facial Alignment for Assistive Technologies. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 31, 954-961.
  - Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (2023). Supervised deep learning for the moving morphable components topology optimization framework. Engineering Applications of Artificial Intelligence, 123, 15 pages.
- 2022
  - Coulombe, C., Saussié, D., & Achiche, S. (2022). Modeling and gain-scheduled control of an aerial manipulator. International Journal of Dynamics and Control, 10(1), 217-229.
- 2021
  - Trouillefou, C. M., Law-Kam Cio, Y.-S., Jolicoeur, M., Said, B., Galarneau, A., Achiche, S., & Beltrame, G. (2021). An autonomous plant growing miniaturized incubator for a Cubesat. Acta Astronautica, 179, 439-449.
  - Blanchet, L., Achiche, S., Docquier, Q., Fisette, P., & Raison, M. (2021). A procedure to optimize the geometric and dynamic designs of assistive upper limb exoskeletons. Multibody System Dynamics, 51(2), 221-245.
  - Pipitone, F., Achiche, S., Appio, F. P., & Martini, A. (2021). Building an ANFIS-Based Decision Support System for Regional Growth: The Case of European Regions. IEEE Transactions on Engineering Management, 68(3), 838-852.
  - Bernard, G., Achiche, S., Girard, S., & Mayer, J. R. R. (2021). Condition monitoring of manufacturing processes under low sampling rate. Journal of Manufacturing and Materials Processing, 5(1), 26 (14 pages).
  - Gaudet, G., Raison, M., & Achiche, S. (2021). Current trends and challenges in pediatric access to sensorless and sensor-based upper limb exoskeletons. Sensors, 21(10), 3561 (17 pages).
  - Beaini, D., Achiche, S., Duperré, A., & Raison, M. (2021). Deep green function convolution for improving saliency in convolutional neural networks. Visual Computer, 37(2), 227-244.
  - Popescu, R. I., Raison, M., Popescu, G. M., Saussié, D., & Achiche, S. (2021). Design and development of a novel type of table tennis aerial robot player with tilting propellers. Mechatronics, 74, 13 pages.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2021). 3D printing process for textile composites. CIRP Journal of Manufacturing Science and Technology, 32, 507-516.
  - de Lima, L. A. P., de Lucas, R. D., Raison, M., & Achiche, S. (2021). Erratum: Is the understanding of VO₂ kinetics biased by the first-order multi-exponential model? Pflügers Archiv-European Journal of Physiology, 473(1), 131-131.
  - Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021). Evolutionary layout design synthesis of an autonomous greenhouse using product-related dependencies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 35(1), 49-64.
  - Nguiadem, C., Raison, M., & Achiche, S. (2021). Impact of the choice of upper limb prosthesis mechanism on kinematics, and dynamic quality. Medical Engineering and Physics, 94, 16-25.
  - Engler, K., Vicente, S., Ma, Y., Hijal, T., Cox, J., Ahmed, S., Klein, M., Achiche, S., Pant Pai, N., de Pokomandy, A., Lacombe, K., & Lebouché, B. (2021). Implementation of an electronic patient-reported measure of barriers to antiretroviral therapy adherence with the Opal patient portal: Protocol for a mixed method type 3 hybrid pilot study at a large Montreal HIV clinic. PLOS ONE, 16(12), 19 pages.
  - Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2021). On generating stiffening layouts with density-based topology optimization considering buckling. CEAS Aeronautical Journal, 12(4), 863-877.
- 2020
  - Mohebbi, A., Achiche, S., & Baron, L. (2020). A fuzzy-based framework to support multicriteria design of mechatronic systems. Journal of Computational Design and Engineering, 7(6), 816-829.
  - Samadi, B., Raison, M., Achiche, S., & Fortin, C. (2020). Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis. Computer Methods in Biomechanics and Biomedical Engineering, 23(10), 664-674.
  - Xing, K., Mayer, J. R. R., & Achiche, S. (2020). Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. International Journal of Automation Technology, 14(3), 369-379.
  - de Lima, L. A. P., de Lucas, R. D., Raison, M., & Achiche, S. (2020). Is the understanding of VO₂ kinetics biased by the first-order multi-exponential model? Pflügers Archiv-European Journal of Physiology, 472(12), 1661-1663.
  - Nguiadem, C., Raison, M., & Achiche, S. (2020). Motion planning of upper-limb exoskeleton robots : a review. Applied Sciences, 10(21), 21 pages.
  - Barron, O., Raison, M., Gaudet, G., & Achiche, S. (2020). Recurrent Neural Network for electromyographic gesture recognition in transhumeral amputees. Applied Soft Computing Journal, 96, 9 pages.
  - de Lima, L. A. P., Achiche, S., de Lucas, R. D., & Raison, M. (2020). Second-order simultaneous components model for the overshoot and “slow component” in V̇O₂ kinetics. Respiratory Physiology & Neurobiology, 280, 10 pages.
- 2019
  - Bougrinat, Y., Achiche, S., & Raison, M. (2019). Design and development of a lightweight ankle exoskeleton for human walking augmentation. Mechatronics, 64, 12 pages.
  - Larouche Guilbert, M., Raison, M., Fortin, C., & Achiche, S. (2019). Development of a multibody model to assess efforts along the spine for the rehabilitation of adolescents with idiopathic scoliosis. Journal of Musculoskeletal and Neuronal Interact, 19(1), 9 pages.
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019). Five-axis machine tool fault monitoring using volumetric errors fractal analysis. CIRP Annals, 168(1), 555-558.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (2019). Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures. International Journal of Machine Tools & Manufacture, 138, 80-93.
  - Mohebbi, A., Achiche, S., & Baron, L. (2019). Integrated and concurrent detailed design of a mechatronic quadrotor system using a fuzzy-based particle swarm optimization. Engineering Applications of Artificial Intelligence, 82, 192-206.
  - Chouinard, U., Achiche, S., & Baron, L. (2019). Integrating negative dependencies assessment during mechatronics conceptual design using fuzzy logic and quantitative graph theory. Mechatronics, 59, 140-153.
  - Chouinard, U., Pigosso, D. C. A., McAloone, T. C., Baron, L., & Achiche, S. (2019). Potential of circular economy implementation in the mechatronics industry: An exploratory research. Journal of Cleaner Production, 239, 12 pages.
  - Cio, Y.-S. L.-K., Raison, M., Leblond Menard, C., & Achiche, S. (2019). Proof of Concept of an Assistive Robotic Arm Control Using Artificial Stereovision and Eye-Tracking. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 27(12), 2344-2352.
- 2018
  - Gaudet, G., Raison, M., & Achiche, S. (2018). Classification of upper limb phantom movements in transhumeral amputees using electromyographic and kinematic features. Engineering Applications of Artificial Intelligence, 68, 153-164.
  - Gamache, J.-F., Vadean, A., Noirot-Nérin, É., Beaini, D., & Achiche, S. (2018). Image-based truss recognition for density-based topology optimization approach. Structural and Multidisciplinary Optimization, 58(6), 2697-2709.
  - Xing, K., Mayer, J. R. R., & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3).
  - Mohebbi, A., Achiche, S., & Baron, L. (2018). Multi-criteria fuzzy decision support for conceptual evaluation in design of mechatronic systems: a quadrotor design case study. Research in Engineering Design, 29(3), 329-349.
  - de Lima, L. A. P., Raison, M., Achiche, S., & de Lucas, R. D. (2018). Second order modeling for the pulmonary oxygen uptake on-kinetics: a comprehensive solution for overshooting and non-overshooting responses to exercise. Journal of Applied Physiology, 125(4), 1315-1328.
  - Raouafi, S., Achiche, S., & Raison, M. (2018). Socioeconomic disparities and difficulties to access to healthcare services among Canadian children with neurodevelopmental disorders and disabilities. Epidemiology Health, 40, e2018010 (10 pages).
  - Wen, J., Raison, M., & Achiche, S. (2018). Using a cost function based on kinematics and electromyographic data to quantify muscle forces. Journal of Biomechanics, 80, 151-158.
- 2017
  - Leroux, M., Achiche, S., & Raison, M. (2017). Assessment of accuracy for target detection in 3D-space using eye tracking and computer vision. PeerJ Preprints, 5, e2718v1.
  - Raouafi, S., Achiche, S., Begon, M., Sarcher, A., & Raison, M. (2017). Classification of upper limb disability levels of children with spastic unilateral cerebral palsy using K-means algorithm. Medical and Biological Engineering and Computing, 56(1), 49-59.
  - Huang, C.-W., Baron, L., Balazinski, M., & Achiche, S. (2017). Comprehensive model optimization in pulp quality prediction: A machine learning approach. PeerJ Preprints, 5, e2949v1.
  - Samadi, B., Raison, M., Ballaz, L., & Achiche, S. (2017). Decomposition of three-dimensional ground-reaction forces under both feet during gait. Journal of Musculoskeletal & Neuronal Interactions, 17(4), 283-291.
  - Zizoua, C., Raison, M., Boukhenous, S., Attari, M., & Achiche, S. (2017). Development of a Bracelet with Strain-Gauge Matrix for Movement Intention Identification in Traumatic Amputees. IEEE Sensors Journal, 17(8), 2464-2471.
  - Bousquet-Jetté, C., Achiche, S., Beaini, D., Cio, Y., Leblond-Ménard, C., & Raison, M. (2017). Fast scene analysis using vision and artificial intelligence for object prehension by an assistive robot. Engineering Applications of Artificial Intelligence, 63, 33-44.
  - Appio, F. P., Achiche, S., Martini, A., & Beaudry, C. (2017). On designers' use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, 29(7), 1-15.
- 2016
  - Achiche, S., Shlechtingen, M., Raison, M., Baron, L., & Santos, I. F. (2016). Adaptive Neuro-Fuzzy Inference System Models for Force Prediction of a Mechatronic Flexible Structure. Journal of Integrated Design & Process Science, 19(3), 77-94.
  - Samadi, B., Achiche, S., Parent, A., Ballaz, L., Chouinard, U., & Raison, M. (2016). Custom sizing of lower limb exoskeleton actuators using gait dynamic modelling of children with cerebral palsy. Computer Methods in Biomechanics and Biomedical Engineering, 19(14), 1519-1524.
  - Hehenberger, P., Vogel-Heuser, B., Bradley, D., Eynard, B., Tomiyama, T., & Achiche, S. (2016). Design, modelling, simulation and integration of cyber physical systems: Methods and applications. Computers in Industry, 82, 273-289.
  - Mohebbi, A., Achiche, S., & Baron, L. (2016). Design of a vision guided mechatronic quadrotor system using design for control methodology. Transactions of the Canadian Society for Mechanical Engineering, 40(2), 201-219.
  - Achiche, S., & Tomiyama, T. (2016). Design of Multidisciplinary Cyber Physical Systems. Journal of Integrated Design and Process Science, 19(3), 1-3.
  - Zizoua, C., Raison, M., Boukhenous, S., Attari, M., & Achiche, S. (2016). Detecting muscle contractions using strain gauges. Electronics Letters, 52(22), 1836-1838.
  - Gaudet, G., Raison, M., Maso, F. D., Achiche, S., & Begon, M. (2016). Intra- and intersession reliability of surface electromyography on muscles actuating the forearm during maximum voluntary contractions. Journal of Applied Biomechanics, 32(6), 558-570.
- 2014
  - Torry-Smith, J. M., Mortensen, N. H., & Achiche, S. (2014). A proposal for a classification of product-related dependencies in development of mechatronic products. Research in Engineering Design, 25(1), 53-74.
  - Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences, 255, 121-134.
- 2013
  - Appio, F. P., Achiche, S., McAloone, T. C., & Howard, T. J. (2013). An inquiry on managers use of decision-making tools in the core front end of the innovation process. International Journal of Product Development, 18(6), 461-491.
  - Ren, Q., Balazinski, M., Jemielniak, K., Baron, L., & Achiche, S. (2013). Experimental and fuzzy modelling analysis on dynamic cutting force in micro milling. Soft Computing, 17(9), 1687-1697.
  - Achiche, S., Appio, F. P., McAloone, T. C., & Di Minin, A. (2013). Fuzzy decision support for tools selection in the core front end activities of new product development. Research in Engineering Design, 24(1), 1-18.
  - Schlechtingen, M., Santos, I. F., & Achiche, S. (2013). Using data-mining approaches for wind turbine power curve monitoring: A comparative study. IEEE Transactions on Sustainable Energy, 4(3), 671-679.
  - Schlechtingen, M., Santos, I. F., & Achiche, S. (2013). Wind turbine condition monitoring based on SCADA data - Part 1, System description. Applied Soft Computing, 13(1), 259-270.
- 2012
  - Torry Smith, J. M., Qamar, A., Achiche, S., Wikander, J., Mortensenand, N. H., & During, C. (2012). Challenges in designing mechatronic systems. Journal of Mechanical Design, 135(1), 11-11.
  - Achiche, S., Howard, T. J., McAloone, T. C., & Baron, L. (2012). Investigating features influence in fuzzy modelling of mass perception of non-functional 3D CAD forms. International Journal of Product Development, 16(2), 112-139.
  - Achiche, S., & Woźniak, A. (2012). Three-dimensional modeling of coordinate measuring machines probing accuracy and settings using fuzzy knowledge bases: Application to TP6 and TP200 triggering probes. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 26(4), 425-441.
- 2011
  - Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (2011). Appraisal of new product development success indicators in the aerospace industry. Journal of Mechanical Design, 133(10).
  - Achiche, S., & Ahmed-Kristensen, S. (2011). Genetic fuzzy modeling of user perception of three-dimensional shapes. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 25(1), 93-107.
- 2008
  - Fan, Z., Wang, J., Achiche, S., Goodman, E., & Rosenberg, R. (2008). Structured synthesis of MEMS using evolutionary approaches. Applied Soft Computing, 8(1), 579-589.
- 2007
  - Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2007). Online prediction of pulp brightness using fuzzy logic models. Engineering Applications of Artificial Intelligence, 20(1), 25-36.
- 2005
  - Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (2005). Influence of clustering pre-processing on genetically generated fuzzy knowledge bases. Computer Assisted Mechanics and Engineering Sciences, 12(2-3), 207-221.
- 2004
  - Achiche, S., Balazinski, M., & Baron, L. (2004). Multi combinative strategy to avoid premature convergence in genetically-generated fuzzy knowledge bases. Journal of Theoretical and Applied Mechanics, 42(3), 417-444.
  - Achiche, S., Baron, L., & Balazinski, M. (2004). Real/binary-like coded versus binary coded genetic algorithms to automatically generate fuzzy knowledge bases: A comparative study. Engineering Applications of Artificial Intelligence, 17(4), 313-325.
- 2002
  - Achiche, S., Balazinski, M., Baron, L., & Jemielniak, K. (2002). Tool wear monitoring using genetically-generated fuzzy knowledge bases. Engineering Applications of Artificial Intelligence, 15(3-4), 303-314.
- 2001
  - Baron, L., Achiche, S., & Balazinski, M. (2001). Fuzzy decision support system knowledge base generation using a genetic algorithm. International Journal of Approximate Reasoning, 28(2-3), 125-148.
Communications de conférence (110)
- 2024
  - Pedenon-Orlanducci, R., Zaydan, A., Achiche, S., & Saussié, D. (janvier 2024). A Hybrid Optimal Path Planner for Parafoiled Systems [Communication écrite]. AIAA SCITECH 2024 Forum, Orlando, FL, USA.
- 2023
  - Behidj, A., Achiche, S., & Mohebbi, A. (juillet 2023). Upper-Limb Rehabilitation of Patients with Neuromotor Deficits Using Impedance-Based Control of a 6-DOF Robot [Communication écrite]. 45th Annual International Conference of the IEEE Engineering in Medicine and Biology Conference (EMBC 2023), Sydney, Australia (4 pages).
- 2022
  - Ma, Y., Vincente, S., Engler, K., Achiche, S., Thériault, L., Lemire, B., Tu, G., Frih, I., Nait El Haj, M., Laymouna, M. A., de Polomandy, A., Cox, J., & Lebouché, B. (octobre 2022). An artificial intelligence-based Chatbot aimed at promoting HIV self-management : quantitative results of a mixed-method usability study [Affiche]. Fast-Track Cities 2022, Seville, Spain.
  - Talos, C. S., Achiche, S., & Laberge Lebel, L. (septembre 2022). Automated braiding carriers for industry 4.0 [Présentation]. Dans Texcomp 2022, Kyoto, Japan.
  - Talos, C. S., Achiche, S., & Laberge Lebel, L. (juillet 2022). Characterization of the yarn tension evolution generated by braiding carriers [Présentation]. Dans Canadian-International Conference on Composites (CANCOM 2022), Fredericton/Moncton, N.-B..
  - Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (août 2022). Comparative study of first-order moving asymptotes optimizers for the moving morphable components topology optimization framework [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2022), St. Louis, MO, USA.
  - Ma, Y., Achiche, S., & Lebouché, B. (juin 2022). Development of a Chatbot for HIV patients using Participatory Design [Présentation]. Dans Virtual Conference +Tradeshow (HEALTH 2022).
  - Ma, Y., Tu, G., Laymouna, M. A., Achiche, S., Frih, I., Chehab, M., Thériault, L., Lemire, B., Nait Ei Haj, M., & Lebouché, B. (mai 2022). Développement d'un Chatbot pour soutenir l'autogestion chez les personnes vivant avec le VIH en temps de pandémie [Présentation]. Dans 89e congrès de l'ACFAS.
  - Hesabi, H., Jung, T., Nourelfath, M., & Achiche, S. (août 2022). Fault Diagnosis of Power Transformers Based on Machine Learning Approaches [Communication écrite]. 32nd European Safety and Reliability Conference (ESREL 2022), Dublin, Ireland.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (septembre 2022). Horngear and carrier design for 3D-braiding of tailorable composite preforms [Présentation]. Dans Texcomp 2022, Kyoto, Japan.
  - Frih, I., Tu, G., Ma, Y., Achiche, S., Laymouna, M. A., Chehab, M., Thériault, L., Lemire, B., Nait El Haj, M., & Lebouché, B. (juillet 2022). Lessons learned from the development and implementation of MARVIN : a bilingual artificial intelligence Chatbot for people living with HIV [Affiche]. 24th International AIDS Conference (AIDS 2022), Montreal, Canada, and virtually.
  - Ma, Y., Engler, K., Vincente, S., Achiche, S., Lemire, B., Rodrigez Cruz, A., Thériault, L., Soussou, S., Régazzoni, B., Tu, G., Nait Ei Haj, M., de Polomandy, A., Cox, J., Zahedi Niaki, N., & Lebouché, B. (avril 2022). Usability and acceptability of an artificial intelligence-based Chatbot to facilitate antiretroviral self-management in people living with HIV [Présentation]. Dans 31st annual Canadian Conference on HIV/AIDS Research (CAHR 2022).
  - Ma, Y., Engler, K., Vincente, S., Achiche, S., Lemire, B., Rodrigez Cruz, A., Thériault, L., Soussou, S., Régazzoni, B., Tu, G., Nait Ei Haj, M., de Pokomandy, A., Cox, J., Zahedi Niaki, N., & Lebouché, B. (avril 2022). Utilisabilité et acceptabilité d'un Chatbot basé sur l'intelligence artificielle pour faciliter l'autogestion des antirétroviraux chez les personnes vivant avec le VIH [Affiche]. 11ème conférence internationale francophone de Alliance francophone des acteurs de santé contre le VIH et les infections virales chroniques ou émergentes (AFRAVIH 2022), Marseille, France.
- 2021
  - Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (octobre 2021). Conceptual design of a nano satellite incubator using axiomatic design and a mechatronic multicriteria profile [Communication écrite]. 23rd International Dependency and Structure Modeling Conference (DSM 2021), Montreal, Québec (10 pages).
  - Gesta, A., Mohebbi, A., & Achiche, S. (octobre 2021). Low-cost 1 degree of freedom ankle exoskeleton for children with cerebral palsy [Résumé]. Tech Day.
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelin, J.-F., & Achiche, S. (mars 2021). Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters [Communication écrite]. 14th International Conference & Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2021) (10 pages).
  - Ma, Y., Engler, K., Vicente, S., Achiche, S., Lemire, B., Cruz, A. R., Thériault, L., Soussou, S., Regazzoni, B., Tu, G., Haj, M. N. E., de Pokomandy, A., Cox, J., Niaki, N. Z., & Lebouche, B. (octobre 2021). Usability of an artificial intelligence chatbot to facilitate self-management of antiretroviral therapy in HIV patients [Résumé]. 18th European AIDS Conference (EACS 2021), Londres, Royaume-Uni. Publié dans HIV Medicine, 22(S3).
- 2020
  - Ma, Y., Sanmiguel, D., Lessard, D., Thériault, L., Achiche, S., Arora, A., Mate, K., Lemire, B., Hijal, T., Schuster, T., Kildea, J., De Pokomandy, A., Cox, J., Kronfli, N., Klein, M., & Lebouché, B. (juillet 2020). Chatbot MARVIN: Development study of an Intelligent Conversational Agent to Promote HIV Patients' Engagement in Care and Management of ART Adherence Barriers [Affiche]. 23rd International AIDS Conference (AIDS 2020: Virtual).
  - Chouinard, U., Cio, Y.-S. L.-K., Vadean, A., & Achiche, S. (octobre 2020). Concurrent modeling of positive and negative dependencies in the design structure matrix using complex numbers [Communication écrite]. 22nd International Dependency and Structure Modeling Conference (DSM 2020), Cambridge, Massachusetts.
  - Xing, K., Liu, X., Liu, Z., Mayer, J. R. R., & Achiche, S. (octobre 2020). Low-Cost Precision Monitoring System of Machine Tools for SMEs [Communication écrite]. 8th CIRP Global Web Conference on Flexible Mass Customisation (CIRPe 2020). Publié dans Procedia CIRP, 96.
  - Ma, Y., Bock, G., Cherni, G., Thériault, L., Lessard, D., Achiche, S., & Lebouché, B. (juillet 2020). Marvin : Intelligent conversational agent for HIV patient self-management [Présentation]. Dans 23e Congrès international sur le sida (SIDA 2020).
  - Ma, Y., Bock, G., Cherni, G., Lemire, B., Therrien, R., Thériault, L., Lessard, D., Engler, K., & Achiche, S. (novembre 2020). Meet Marvin, the CHATBOT : using artificial intelligence to engage HIV patients in their antiretroviral therapy [Présentation]. Dans Workshop on Healthy Living with HIV.
  - Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (août 2020). Objective reduction using axiomatic design and product-related dependencies : a layout synthesis of an autonomous greenhouse case study [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages).
  - Hernández, S., Achiche, S., Spooner, D., Vadean, A., & Raison, M. (août 2020). On Supporting the Learning of Biomechanics Using Multidisciplinary Physical Prototyping [Communication écrite]. ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages).
  - Coulombe, C., Gamache, J.-F., Barron, O., Descôteaux, G., Saussié, D., & Achiche, S. (août 2020). Task Taxonomy for Autonomous Unmanned Aerial Manipulator: A Review [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.
  - Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (août 2020). Topology Optimization for Stiffened Panels: A Ground Structure Method [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.
- 2019
  - Xing, K., Mayer, J. R. R., & Achiche, S. (juin 2019). Application of EWMA control chart on volumetric errors change recognition [Communication écrite]. Joint CSME-CFDSC International Congress, London, ON.
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (octobre 2019). Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures [Communication écrite]. 7th CIRP Global Web Conference (CIRPe 2019), Berlin, Germany. Publié dans Procedia CIRP, 86.
  - Raison, M., Gaudet, G., Blanchet, L., Lecours, S., Clark, E., & Achiche, S. (octobre 2019). Review: pediatric assistance robotics [Communication écrite]. 34e Congrès de la Société Française de Médecine Physique et de Réadaptation (SOFMER 2019), Bordeaux, France.
  - Chouinard, U., Achiche, S., Santos, I., & Baron, L. (mars 2019). Robust design support using fuzzy simulation of uncertain dynamic system : a self balancing robot case study [Communication écrite]. 15th International Symposium on Dynamic Problems of Mechanics (DINAMW 2019), Buzios, Brazil.
  - Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. Canadian Aeronautics and Space Institute (AERO 19), Laval, Québec, Canada (4 pages).
  - Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. 39th Conference on Applied Statistics in Ireland (CASI 2019), Dublin, Ireland (4 pages).
- 2018
  - Armellini, F., Beaudry, C., & Achiche, S. (septembre 2018). Assessing interrater fidelity for continuous innovation : how differently is innovation perceived by R&D and operations management? [Communication écrite]. 19th International Continuous Innovation Network Conference (CINet 2018), Dublin, Ireland.
  - Xing, K., Achiche, S., Esmaeili, S., & Mayer, J. R. R. (octobre 2018). Comparison of direct and indirect methods for five-axis machine tools geometric error measurement [Communication écrite]. 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018). Publié dans Procedia CIRP, 78.
  - Mohebbi, A., Achiche, S., & Baron, L. (août 2018). Data-driven approaches in multi-criteria decision support for mechatronic systems design [Présentation]. Dans DSR Workshop on Data Driven Design and Learning, Montréal, Québec.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (décembre 2018). The Effects of Machine Tool Pallet Change on Machine Tool Geometric Measurement Using the Scale and Master Ball Artefact Method (SAMBA) [Communication écrite]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam.
  - Gamache, J.-F., Vadean, A., & Achiche, S. (août 2018). Topology Optimization for the Design of Stiffened Panels for Wing Box [Communication écrite]. Proceedings of Design Science Research 2018: Data-Driven Design and Learning, Montréal, Canada.
  - Blanchet, L., Lecours, S., Docquier, Q., Barron, O., Achiche, S., & Raison, M. (juin 2018). Towards the optimal design of a passive upper limb exoskeleton compensating gravity [Communication écrite]. 5th Joint International Conference on Multibody System Dynamics, Lisbon, Portugal.
- 2017
  - Mohebbi, A., Coulombe, C., Baron, L., & Achiche, S. (mai 2017). A fuzzy-based approach towards conceptual design improvements for mechatronics systems [Communication écrite]. CCToMM Symposium on Mechanisms, Machine and Mechatronics, Montréal, Québec.
  - Chouinard, U., Achiche, S., Bieze, T., Baron, L., & Duriez, C. (mai 2017). Analysing design modifications effects on the compliance of deformable hybrid serial-parallel manipulators [Communication écrite]. CCToMM Symposium on Mechanisms, Machine and Mechatronics, Montréal, Québec.
  - Coulombe, C., Gamache, J.-F., Mohebbi, A., Chouinard, U., & Achiche, S. (août 2017). Applying robust design methodology to a quadrotor drone [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC.
  - Chouinard, U., Achiche, S., Leblond-Menard, C., & Baron, L. (août 2017). Assessment of dependencies in mechatronics conceptual design of a quadcopter drone using linguistic fuzzy variables [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada.
  - Ramananarivo, M., Raison, M., Barron, O., & Achiche, S. (août 2017). Biofidelic design of the forearm of a myoelectric prosthesis with maximum functional volume [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada.
  - Leroux, M., Achiche, S., & Raison, M. (août 2017). Design guidelines for shoulder design of an anthropomorphic robotic ARM [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada.
  - Mohebbi, A., Gallacher, C., Harrison, J., Willes, J., & Achiche, S. (août 2017). Integrated structure-control design optimization of an unmanned quadrotor helicopter (UGH) for object grasping and manipulation [Communication écrite]. 21st International Conference on Engineering Design (ICED 2017), Vancouver, BC, Canada.
  - Raison, M., Bougrinat, Y., Blanchet, L., Barron, O., & Achiche, S. (juillet 2017). Perspective talk : Will the assistive exoskeletons of the future be biomimetic? [Présentation]. Dans 23rd Congress of the European Society of Biomechanics (ESB 2017), Sevilla, Spain.
  - Duivenvoorden, A., Kyungjin, L., Raison, M., & Achiche, S. (octobre 2017). Sensor fusion in upper limb area networks: a survey [Communication écrite]. Global Information Infrastructure and Networking Symposium (GIIS 2017), St. Pierre, France.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (mai 2017). Volumetric error modelling for machine tool condition monitoring using data methods [Communication écrite]. International Conference on Virtual Machining and Process Technology, Montréal, Québec.
  - Zizoua, C., Achiche, S., Boukhenous, S., Attari, M., & Raison, M. (avril 2017). Wearable bio-instrument for detecting body movement based on strain gauges [Communication écrite]. 30th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2017), Windsor, ON, Canada (4 pages).
- 2016
  - Ren, Q., Achiche, S., Jemielniak, K., & Bigras, P. (juillet 2016). An Enhanced Adaptive Neural Fuzzy Tool Condition Monitoring for Turning Process [Communication écrite]. IEEE International Conference on Fuzzy Systems (FUZZ 2016), Vancouver, B.C..
  - Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (mai 2016). Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Blanchet, L., Dal Maso, F., Begon, M., Achiche, S., & Raison, M. (mai 2016). Impact of muscle modeling refinement on its kinematics and dynamics [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Hernandez, S., Leroux, M., Achiche, S., & Raison, M. (mai 2016). Project Based Learning involving physical prototypes to support the teaching of multibody modeling applied to the human body [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Larouche-Guilbert, M., Barron, O., Achiche, S., & Raison, M. (mai 2016). Real-time assessment of muscle forces based on multibody dynamics and electromyography [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Leroux, M., Beaini, D., Achiche, S., & Raison, M. (mai 2016). Revisiting the Agile eye using Euler-Lagrange Formalism and Torque Control [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Wen, J., Blanchet, L., Dal Maso, F., Achiche, S., & Raison, M. (mai 2016). Towards the identification of the most realistic strategy of muscle force distribution during movement cycles [Communication écrite]. Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
- 2015
  - Samadi, B., Achiche, S., & Raison, M. (juin 2015). Benchmark of the upper limb in 3D to analyze internal effort quantification and realistic movement reproduction [Communication écrite]. ECCOMAS Thematic Conference on Multibody Dynamics, Barcelona, Catalonia, Spain.
  - Leroux, M., Raison, M., Adadja, T., & Achiche, S. (mai 2015). Combination of eyetracking and computer vision for robotics control [Communication écrite]. IEEE Conference on Technologies for Practical Robot Applications (TePRA 2015), Woburn, MA, United states (6 pages).
  - Torry Smith, J. M., Mortensen, N. H., Ploug, O., & Achiche, S. (juillet 2015). Industrial application of a mechatronic framework [Communication écrite]. 20th International Conference on Engineering Design (ICED 2015), Milan, ITALY.
  - Mohebbi, A., Achiche, S., & Baron, L. (mai 2015). Integrated design of a vision-guided quadrotor UAV: A mechatronics approach [Conception intégrée d’un drone quadri-rotor asservi par la vision artificielle : une approche mécatronique]. [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2015), Ottawa, Ont., Canada (12 pages).
  - Hernandez, S., Raison, M., Baron, L., & Achiche, S. (mai 2015). Refinement of exoskeleton design using multibody modeling : An overview [Raffinement de la conception d’exosquelettes basé sur la modélisation multicorps: vue d’ensemble]. [Communication écrite]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2015), Ottawa, Ont., Canada.
- 2014
  - Hernandez, S., Raison, M., Torres, A., Gaudet, G., & Achiche, S. (septembre 2014). From on-body sensors to in-body data for health monitoring and medical robotics : a survey [Communication écrite]. Global Information Infrastructure and Networking Symposium (GIS 2014), Montréal, Québec (5 pages).
  - Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (novembre 2014). Fuzzy decision making for conceptual design of a visual servoing system using mechatronic multi-criteria profile (MMP) [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages).
  - Moatari-Kazerouni, A., Hisarciklilar, O., Achiche, S., & Thomson, V. (août 2014). Impact of the business innovation strategy on new product development success measurement [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec.
  - Mohebbi, A., Achiche, S., & Baron, L. (juillet 2014). Mechatronic multicriteria profile (MMP) for conceptual design of a robotic visual servoing system [Communication écrite]. 12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014), Copenhagen, Denmark (10 pages).
  - Périé-Curnier, D., Balosetti, C., Achiche, S., & Labelle, H. (mai 2014). MRI signal texture parameters within human intervertebral discs as biomarkers of spine pathologies and severities [Communication écrite]. Joint Annual Meeting ISMRM-ESMRMB 2014, Milan, Italy.
  - Gaudet, G., Begon, M., Achiche, S., Dal Maso, F., Musy, G., & Raison, M. (juin 2014). Muscle overactuation problem : two solutions from an undeterminate to a deterministic problem [Communication écrite]. 3rd International Multibody System Dynamics Conference (IMSD 2014), Busan, Korea.
  - Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Neural network-based decision support for conceptual design of a mechatronic system using mechatronic multi-criteria profile (MMP) [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec.
  - Gaudet, G., Raison, M., Achiche, S., Dal Maso, F., Musy, G., & Begon, M. (juillet 2014). Solutions to the muscle redundancy problem : from an undeterminate to a deterministic problem [Communication écrite]. 11th World congress on computational mechanics (WCCM 2014), Barcelona, Spain.
  - Durango, S., Restrepo, D., Ruiz, O., Restrepo-Giraldo, J., & Achiche, S. (mai 2014). Symmetrical observability of kinematic parameters in symmetrical-parallel mechanisms [Communication écrite]. 10th World Congress on Computational Mechanics. Publié dans Blucher Mechanical Engineering Proceedings, 1(1).
  - Mohebbi, A., Baron, L., Achiche, S., & Birglen, L. (août 2014). Trends in concurrent, multi-criteria and optimal design of mechatronic systems: A review [Communication écrite]. 2014 International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec.
  - Schlechtingen, M., Achiche, S., Costa, T. L., Raison, M., & Santos, I. (juin 2014). Using data mining approaches for force prediction of a dynamically loaded flexible structure [Communication écrite]. 12th Biennial conference on engineering systems design and analysis (ESDA 2014), Copenhagen, Denmark.
  - Achiche, S., Maier, A., Milanova, K., & Vadean, A. (novembre 2014). Visual, product evaluation: Using the semantic differential to investigate the influence of basic vase geometry on users' perception [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages).
- 2012
  - Achiche, S., Howard, T., Astavaldsdottir, A., Andersen, O., & McAloone, T. Innovation practices in a cluster context [Communication écrite]. 12th International Design Conference, Dubrovnik, Croatia.
  - Song, Z., Howard, T. J., Achiche, S., & Ali, O. (août 2012). Kansei engineering and web site design [Communication écrite]. ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE 2012), Chicago, Illinois, USA.
  - Howard, T., Achiche, S., McAloone, T., & Özkil, A. Open design and crowdsourcing: maturity, methodology and business models [Communication écrite]. 12th International Design Conference, Dubrovnik, Croatia.
  - Achiche, S., Howard, T., McAloone, T., Deng, L., & Baron, L. Underlying the relationships between success criteria & success factors in NPD activities [Communication écrite]. 12th International Design Conference, Dubrovnik, Croatia.
- 2011
  - Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (janvier 2011). Assessment of tools input requirements and output potential in the core front end of NPD [Communication écrite]. 18th IPDM Conference (IPDM 2011), Delft, Netherlands.
  - Andersen, C. L., Gudmundsson, H. P., Achiche, S., & Boelskifte, P. (août 2011). Challenges and limitations of applying an emotion-driven design approach on elderly users [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark.
  - Gudmundsson, H. P., Andersen, C. L., Achiche, S., & Boelskifte, P. (août 2011). Emotion-driven elicitation of elderly people user needs illustrated by a walking frame case study [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark.
  - Durango, S., Correa, J., Aristizabal, M., Ruiz, O., Restrepo-Giraldo, J. D., & Achiche, S. (septembre 2011). Force-displacement model of compliant mechanisms using assur sub-chains [Communication écrite]. 13th World Congress in Mechanism and Machine Science (IFToMM 2011), Guanajuato, Mexico.
  - Moatari Kazerouni, A., Achiche, S., Hisarciklilar, O., & Thomson, V. (août 2011). Influence of time perspective on new product development success indicators [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark.
  - Torry-Smith, J. M., Achiche, S., Mortensen, N. H., Qamar, A., Wikander, J., & During, C. (août 2011). Mechatronic Design - Still a Considerable Challenge [Communication écrite]. ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, D.C..
  - Appio, F. P., Achiche, S., Di Minin, A., & McAloone, T. (août 2011). Understanding managers decision making process for tools selection in the core front eng of innovation [Communication écrite]. 18th International Conference on Engineering Design (ICED 2011), Copenhagen, Denmark.
- 2010
  - Achiche, S., & Appio, F. P. (août 2010). Fuzzy decision support in the early phases of the fuzzy front end of innovation in product development [Communication écrite]. ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montréal, Québec.
  - Achiche, S. (mars 2010). Genetic fuzzy prediction of mass perception in non-functional 3D shapes [Communication écrite]. 2nd International Conference on Kansei Engineering and Emotion Research, Paris, France.
- 2009
  - Achiche, S., & Ahmed, S. (janvier 2009). Investigating the relationships between quantitative and qualitative properties of 3D shapes using fuzzy logic models [Communication écrite]. International Conference on Research into Design (ICORD 2009), Bangalore, India.
  - Achiche, S., & Ahmed, S. (août 2009). Modeling perception of 3D forms using fuzzy knowledge bases [Communication écrite]. ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, USA..
- 2008
  - Achiche, S., Woźniak, A., Fan, Z., Balazinski, M., Baron, L., & Sørensen, T. (mai 2008). 3D CMM strain-gauge triggering probe error characteristics modeling using fuzzy logic [Communication écrite]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United states.
  - Achiche, S., & Ahmed, S. (août 2008). Mapping shape geometry and emotions using fuzzy logic [Communication écrite]. ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York City.
- 2007
  - Achiche, S., Wang, W., Fan, Z., Ozkil, A., Sorensen, T., Wang, J., & Goodman, E. (juillet 2007). Genetically generated double-level fuzzy controller with a fuzzy adjustment strategy [Communication écrite]. 9th Annual conference on Genetic and evolutionary computation, London, England.
  - Akrout, K., Baron, L., Balazinski, M., & Achiche, S. (juin 2007). Influence of the migration process on the learning performances of fuzzy knowledge bases [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Achiche, S., Fan, Z., & Bolognini, F. (juin 2007). Review of automated design and optimization of MEMS [Communication écrite]. IEEE International Symposium on Industrial Electronics (ISIE 2007), Vigo, Espagne.
  - Fan, Z., & Achiche, S. (septembre 2007). Robust layout synthesis of a MEM crab-leg resonator using a constrained genetic algorithm [Communication écrite]. ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Las Vegas, Nevada, USA.
- 2006
  - Achiche, S., Woźniak, A., Balazinski, M., & Baron, L. (juin 2006). Fuzzy rule base influence on genetic-fuzzy reconstruction of CMM 3D triggering probe error characteristic [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Achiche, S., Przybylo, A., Balazinski, M., & Baron, L. (juin 2006). Predefining numbers of fuzzy sets for genetically generated fuzzy knowledge bases using clustering techniques: Application for tool wear monitoring [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Achiche, S., Baron, L., & Balazinski, M. (juin 2006). Predictive fuzzy control of paper quality [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
- 2005
  - Smoczynska, A., Bartnicka, H., Balazinski, M., Achiche, S., Elektorowicz, M., & Smoczynski, L. (mars 2005). Assessment of Zn and Cu effect of Cadmium sorption based on genetically generated fuzzy knowledge bases [Communication écrite]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland.
  - Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (février 2005). Chips image processing to predict pulp brightness using fuzzy logic techniques [Communication écrite]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2005).
  - Smoczynska, A., Bojanowska, I., Balazinski, M., Achiche, S., & Elektorowicz, M. (mars 2005). Zinc sorption to soil; application of an artificial intelligence method [Communication écrite]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland.
- 2004
  - Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (novembre 2004). Enhancing fuzzy learning with data mining techniques [Communication écrite]. Symposium on Methods of Artificial Intelligence (AI-METH 2004), Poland.
  - Nault, M.-L., Achiche, S., Aubin, C.-É., & Labelle, H. (juin 2004). Fuzzy logic to assist the planning in adolescent idiopathic scoliosis instmmentation surgery [Communication écrite]. International Conference of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Alberta, Canada.
  - Achiche, S., Baron, L., & Balazinski, M. (juin 2004). Scheduling exploration/exploitation levels in genetically-generated fuzzy knowledge bases [Communication écrite]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Alta., Canada.
- 2003
  - Achiche, S., Baron, L., & Balazinski, M. (juin 2003). Real/binary-like coded genetic algorithm to automatically generate fuzzy knowledge bases [Communication écrite]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, Québec.
- 2002
  - Balazinski, M., Baron, L., & Achiche, S. (mai 2002). Rule-set optimization in genetically-generated fuzzy knowledge bases [Communication écrite]. Optimization Days 2002, Montréal, Québec.
- 2001
  - Balazinski, M., Achiche, S., & Baron, L. (juillet 2001). Application of genetically-generated fuzzy knowledge bases in manufacturing [Communication écrite]. Joint 9th IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, BC, Canada.
  - Balazinski, M., Achiche, S., & Baron, L. (juillet 2001). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Communication écrite]. IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, Canada.
  - Balazinski, M., Achiche, S., Baron, L., Elektorowicz, M., & El-Agroudy, A. (juin 2001). Investigation of constructed wetlands efficiency in mercury removal using genetically generated fuzzy knowledge bases [Communication écrite]. 7th Specialty Conference on Environmental Engineering, Victoria, B.C..
- 2000
  - Achiche, S., Balazinski, M., & Baron, L. (mai 2000). Génération automatique par un algorithme génétique de bases de connaissances pour un système d'aide à la décision [Communication écrite]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec.
  - Balazinski, M., Achiche, S., & Baron, L. (janvier 2000). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Communication écrite]. 2nd International Conference on Advanced Manufacturing Technology, Johor, Malaysia.
Chapitres de livre (3)
- 2020
  - Barron, O., Raison, M., & Achiche, S. (2020). Control of transhumeral prostheses based on electromyography pattern recognition: from amputees to deep learning. Dans Powered Prostheses (p. 1-21).
- 2014
  - Geoffroy, P., Mansard, N., Raison, M., Achiche, S., & Todorov, E. (2014). From inverse kinematics to optimal control, accepted to the advances in robot kinematics. Dans Advances in Robot Kinematics (p. 409-418).
- 2001
  - Balazinski, M., Achiche, S., & Baron, L. (2001). Fuzzy knowledge base generation and optimization using a genetic algorithm. Dans Zbiory rozmyte i ich zastosowania (p. 453-467).
Brevets (1)
- 2019
  - Beaini, D., Achiche, S., & Raison, M. (2019). Object analysis in images using electric potentials and electric fields. (Demande de brevet no US20190277618).
Rapports (1)
- 2018
  - Beaini, D., Achiche, S., Law-Kam Cio, Y.-S., & Raison, M. (2018). Novel convolution kernels for computer vision and shape analysis based on electromagnetism. (Rapport).
Thèses (2)
- 2005
  - Achiche, S. (2005). Automatisation du processus de construction des structures de données floues [Thèse de doctorat, École Polytechnique de Montréal].
- 2000
  - Achiche, S. (2000). Génération automatique de bases de connaissances floues pour les systèmes d'aide à la décision [Mémoire de maîtrise, École Polytechnique de Montréal].

Répertoire des expertises

Achiche, Sofiane

Répertoire des expertises

Achiche, Sofiane

Vous êtes ici

Publications par type

Sofiane Achiche (202)