Répertoire des expertises

Vadean, Aurelian

Répertoire des expertises

Vadean, Aurelian

Répertoire des expertises

Publications par type

Article de revue (30) Communication de conférence (35) Livre Chapitre de livre Brevet Rapport (1) Thèse Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Aurelian Vadean (66)

Articles de revue (30)
- 2025
  - Ouadday, R., Vadean, A., Okda, Y. E., Boukhili, R., & Abusrea, M. (2025). Experimental investigation of moisture absorption and mechanical properties of GFRP laminates for stay vane extensions. Journal of Composite Materials.
- 2024
  - Cio, Y.-S. L.-K., Beltrame, G., Vadean, A., Mohebbi, A., & Achiche, S. (2024). Concurrent product layout design optimization and dependency management using a modified NSGA-III approach. Frontiers in Mechanical Engineering, 10, 1178501.
  - Rochefort-Beaudoin, T., Vadean, A., Achiche, S., & Aage, N. (2024). From density to geometry: Instance segmentation for reverse engineering of optimized structures. Engineering Applications of Artificial Intelligence, 141, 109732.
- 2023
  - Gamache, J.-F., Vadean, A., Capo, M., Rochefort-Beaudoin, T., Dodane, N., & Achiche, S. (2023). Complexity-driven layout exploration for aircraft structures. Design Science, 9, 34 pages.
  - Ouadday, R., Abusrea, M., Boukhili, R., & Vadean, A. (2023). Modeling of the effect of ATH fillers on the rheology, curing kinetics, and flexural properties of the epoxy resin forming the hydraulic turbines' stay vanes extension. Mechanics of Advanced Materials and Structures, 15 pages.
  - Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (2023). Supervised deep learning for the moving morphable components topology optimization framework. Engineering Applications of Artificial Intelligence, 123, 15 pages.
- 2022
  - Gamdani, F., Boukhili, R., & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages.
  - Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A., & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 99(6), 1044-1070.
- 2021
  - Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021). Evolutionary layout design synthesis of an autonomous greenhouse using product-related dependencies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 35(1), 49-64.
  - Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2021). On generating stiffening layouts with density-based topology optimization considering buckling. CEAS Aeronautical Journal, 12(4), 863-877.
- 2019
  - Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440.
  - Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages.
- 2018
  - Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263.
  - Gamache, J.-F., Vadean, A., Noirot-Nérin, É., Beaini, D., & Achiche, S. (2018). Image-based truss recognition for density-based topology optimization approach. Structural and Multidisciplinary Optimization, 58(6), 2697-2709.
  - Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105.
- 2017
  - Luk-Cyr, J., Paquet, D., Lanteigne, J., Champliaud, H., & Vadean, A. (2017). A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behaviour. Acta Mechanica Solida Sinica, 30(1), 27-37.
  - Morada, G., Vadean, A., & Boukhili, R. (2017). Failure mechanisms of a sandwich beam with an ATH/epoxy core under static and dynamic three-point bending. Composite Structures, 176, 281-293.
  - Morada, G., Ouadday, R., Vadean, A., & Boukhili, R. (2017). Low-velocity impact resistance of ATH/epoxy core sandwich composite panels: Experimental and numerical analyses. Composites Part B: Engineering, 114, 418-431.
- 2016
  - Dugré, A., Vadean, A., & Chaussée, J. (2016). Challenges of using topology optimization for the design of pressurized stiffened panels. Structural and Multidisciplinary Optimization, 53(2), 303-320.
  - Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38.
  - Luk-Cyr, J., El-Bawab, R., Lanteigne, J., Champliaud, H., & Vadean, A. (2016). Mechanical properties of 75% Ar / 25% CO2 flux-cored arc welded E309L austenitic stainless steel. Materials Science and Engineering: A, 678, 197-203.
  - Luk-Cyr, J., El-Bawab, R., Champliaud, H., Lanteigne, J., & Vadean, A. (2016). Sequential approximate optimization of industrial hammer peening using finite element simulations. Structural and Multidisciplinary Optimization, 55(3), 767-778.
- 2015
  - Gamdani, F., Boukhili, R., & Vadean, A. (2015). Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates. Materials & Design, 88, 702-712.
- 2013
  - Biron, G., Vadean, A., & Tudose, L. (2013). Optimal design of interference fit assemblies subjected to fatigue loads : a sequential approximate multi-objective optimization approach. Structural and Multidisciplinary Optimization, 47(3), 441-451.
- 2011
  - Lanoue, F., Vadean, A., & Sanschagrin, B. (2011). Fretting fatigue strength reduction factor for interference fits. Simulation Modelling Practice and Theory, 19(9), 1811-1823.
  - Michel, L., Vadean, A., & Benoit, R. (2011). Tire burst phenomenon and rupture of a typical truck tire bead design. Tire Science and Technology, 39(4), 270-283.
- 2009
  - Lanoue, F., Vadean, A., & Sanschagrin, B. (2009). Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations. Simulation Modelling Practice and Theory, 17(10), 1587-1602.
- 2008
  - Leray, D., Vadean, A., & Daidié, A. (2008). Fast Computation of Preloaded Bolted Circular Joint Aiming at Fatigue Bolt Sizing - Hypotheses and Modeling. Engineering Computations, 25(1-2), 42-54.
- 2007
  - Bougherara, H., Bureau, M., Campbell, M., Vadean, A., & Yahia, L. (2007). Design of a Biomimetic Polymer-Composite Hip Prosthesis. Journal of Biomedical Materials Research. Part A, 82A(1), 27-40.
- 2006
  - Vadean, A., Leray, D., & Guillot, J. (2006). Bolted joints for very large bearings - Numerical model development. Finite Elements in Analysis and Design, 42(4), 298-313.
Communications de conférence (35)
- 2022
  - Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (août 2022). Comparative study of first-order moving asymptotes optimizers for the moving morphable components topology optimization framework [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2022), St. Louis, MO, USA.
- 2021
  - Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (octobre 2021). Conceptual design of a nano satellite incubator using axiomatic design and a mechatronic multicriteria profile [Communication écrite]. 23rd International Dependency and Structure Modeling Conference (DSM 2021), Montreal, Québec (10 pages).
- 2020
  - Chouinard, U., Cio, Y.-S. L.-K., Vadean, A., & Achiche, S. (octobre 2020). Concurrent modeling of positive and negative dependencies in the design structure matrix using complex numbers [Communication écrite]. 22nd International Dependency and Structure Modeling Conference (DSM 2020), Cambridge, Massachusetts.
  - Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (août 2020). Objective reduction using axiomatic design and product-related dependencies : a layout synthesis of an autonomous greenhouse case study [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages).
  - Hernández, S., Achiche, S., Spooner, D., Vadean, A., & Raison, M. (août 2020). On Supporting the Learning of Biomechanics Using Multidisciplinary Physical Prototyping [Communication écrite]. ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages).
  - Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (août 2020). Topology Optimization for Stiffened Panels: A Ground Structure Method [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.
- 2019
  - Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. Canadian Aeronautics and Space Institute (AERO 19), Laval, Québec, Canada (4 pages).
  - Gamache, J.-F., Vadean, A., & Achiche, S. (mai 2019). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Communication écrite]. 39th Conference on Applied Statistics in Ireland (CASI 2019), Dublin, Ireland (4 pages).
- 2018
  - Gamache, J.-F., Vadean, A., & Achiche, S. (août 2018). Topology Optimization for the Design of Stiffened Panels for Wing Box [Communication écrite]. Proceedings of Design Science Research 2018: Data-Driven Design and Learning, Montréal, Canada.
- 2017
  - Gervais, B., Vadean, A., Brochu, M., & Raison, M. (juin 2017). Development of a Tool for the Sensitivity Analysis of Design Parameters of Femoral Implants in the Human Body During Gait [Communication écrite]. 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS, Prague, République tchèque.
  - Gamdani, F., Boukhili, R., & Vadean, A. (août 2017). Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China.
- 2016
  - Michel, A., Kaabi, A., & Vadean, A. (juillet 2016). Design improvement study of scarf repair for composite structures [Communication écrite]. 2nd International Conference on Mechanics of Composites, Porto, Portugal.
  - Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages).
  - Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec.
  - Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec.
  - Gervais, B., Vadean, A., Brochu, M., & Raison, M. (mai 2016). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Communication écrite]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec.
  - Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (août 2016). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec.
  - Farid, G., Boukhili, R., & Vadean, A. (juillet 2016). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Communication écrite]. 2nd International Conference on Mechanics of Composites, Porto, Portugal.
- 2014
  - Achiche, S., Maier, A., Milanova, K., & Vadean, A. (novembre 2014). Visual, product evaluation: Using the semantic differential to investigate the influence of basic vase geometry on users' perception [Communication écrite]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages).
- 2013
  - Ouellet, M., & Vadean, A. (juin 2013). Design improvement of hybrid composite joints by axiomatic design [Communication écrite]. 7th International Conference on Axiomatic Design (ICAD2013), Worcester, NY United States.
  - Dulong, S., Lévesque, M., Li, C., & Vadean, A. (juillet 2013). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Ouadday, R., Boukhili, R., & Vadean, A. (octobre 2013). Investigation of thick multicore sandwich constructions under low velocity impact and static indentation [Communication écrite]. Symposium on Advances in Hydroelectric Turbine Manufacturing and Repair, Montréal, Québec.
  - Spooner, D., & Vadean, A. (mai 2013). L'enseignement du design transdisciplinaire de produits et de procédés [Communication écrite]. Journée MATI, Montréal, Québec.
- 2010
  - Becker, M., Spooner, D., Huet, G., Sanschagrin, B., Vadean, A., & Camarero, R. (juin 2010). The designer's logbook: a best practice for engineering students, an insightful assessment medium for educators [Communication écrite]. 6th International CDIO Conference, Making Change Last : Sustaining and globalizing Engineering Educational Reform, Montréal, Québec.
- 2009
  - Huet, G., Vadean, A., Spooner, D., & Camarero, R. (septembre 2009). Knowledge management : a new educational challenge for student design projects [Communication écrite]. 11th Conference on Engineering and Product Design Education, Brighton, England.
  - Surcel, M., Buzatu, P., & Vadean, A. (août 2009). Numerical simulation for evaluating child occupant behaviour in the case of a rear impact [Communication écrite]. International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany.
  - Spooner, D., Huet, G., Fortin, C., Vadean, A., & Niewoehner, R. (juin 2009). The assessment of engineering reasoning recorded in student engineering design journal [Communication écrite]. 5th International CDIO Conference, Singapore.
- 2008
  - Yang, J., Chen, Z. C., & Vadean, A. (juin 2008). Application of an analytical-and-FEA coupled optimization approach to gear train design [Communication écrite]. CSME Forum, Ottawa.
  - Huet, G., Spooner, D., Vadean, A., Leblanc, T., Camarero, R., & Fortin, C. (septembre 2008). Development of collaborative and social skills through multidisciplinary design projects [Communication écrite]. International Conference on Engineering and Product Design Education, Barcelona, Spain.
  - Spooner, D., Sanschagrin, B., Gagnon, M., Vadean, A., Camarero, R., Leblanc, T., & Poirier, D. (juin 2008). Fostering team dynamics across and engineering curriculum [Communication écrite]. 4th International CDIO Conference, Ghent, Belgium.
  - Huet, G., Sanschagrin, B., Gagnon, M., Spooner, D., Vadean, A., & Camarero, R. (juin 2008). The assessment of student teamwork to promote CDIO learning objectives [Communication écrite]. 4th International CDIO Conference, Ghent, Belgium.
  - Divialle, A., Vadean, A., Vaclav, K., & Yahia, L. (juin 2008). Thermodynamic model of bone remodeling : numerical implementation [Communication écrite]. 31st Annual Conference Canadian Medical and Biological Engineering Society (CMBEC 2008), Montréal, Québec.
- 2005
  - Chaib, Z., Daidié, A., Guillot, J., & Vadean, A. (novembre 2005). Study of a bolted and screwed fixation of a slewing bearing [Communication écrite]. 4th International Conference Integrated Design and Production, Casablanca, Maroc.
  - Sanschagrin, B., Fortin, C., Vadean, A., & Lakis, A. A. (juillet 2005). Virtual product development within a fourth year option in the mechanical engineering curriculum [Communication écrite]. Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada.
- 2000
  - Vadean, A., Leray, D., Lakiss, H., & Guillot, J. (mai 2000). A Hybrid Calculation Model for Bolted Assemblies Used for Slewing Bearings [Communication écrite]. Third IDMME Conference, Montreal, Canada.
Rapports (1)
- 2018
  - Hubert, P., Dano, M.-L., Vadean, A., & Li, C. (2018). Development of new repair technologies for out-of-autoclave aircraft composite components. (Rapport technique n° STO-MP-AVT-266).

Répertoire des expertises

Vadean, Aurelian

Répertoire des expertises

Vadean, Aurelian

Vous êtes ici

Publications par type

Aurelian Vadean (66)