Directory of Experts
Back to search results
Aurelian Vadean
Eng., DEA, Doctorate (INSA Toulouse, France)

Research interests and affiliations

Research interests

Professor Vadean's research and applied work are realised within GAOSYM group.

  • Topological and topographical optimization
  • Biomechanics of implants
  • Optimal design by artificial intelligence
  • Design and optimization of composite joint
  • Numerical modeling and simulation
  • Power drives
  • Transport safety: tires blow out and explosion
Expertise type(s) (NSERC subjects)
  • 1700 DESIGN AND MANUFACTURING
  • 1703 Occupational safety
  • 2007 Composites
  • 2106 Stress analysis
  • 2107 Modelling, simulation and finite element methods
  • 2108 Aerospace, aeronautical and automotive engineering

Publications

Recent publications
Conference paper
Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F. & Achiche, S. (2022). Comparative study of first-order moving asymptotes optimizers for the moving morphable components topology optimization framework. Paper presented at the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2022), St. Louis, MO, USA. Retrieved from https://doi.org/10.1115/DETC2022-88722
Journal article
Gamdani, F., Boukhili, R. & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages. Retrieved from https://doi.org/10.1016/j.ijfatigue.2022.106738
Journal article
Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A. & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 27 pages. Retrieved from https://doi.org/10.1080/00218464.2022.2078196
Conference paper
Ma, Y., Vadean, A., Beltrame, G. & Achiche, S. (2021). Conceptual design of a nano satellite incubator using axiomatic design and a mechatronic multicriteria profile. Paper presented at the 23rd International Dependency and Structure Modeling Conference (DSM 2021), Montreal, Québec (10 pages). Retrieved from https://doi.org/10.35199/dsm2021.6

Teaching

MEC8354 - Calcul de composantes mécaniques

MEC8370 - Projet intégrateur IV (groupe multidiciplinaire)

MEC2310 - Éléments de machines

MEC1010 - Santé et sécurité en laboratoires d'enseignement

CAP7002 - Stratégies de recherche - Maîtrise en génie

Supervision at Polytechnique

IN PROGRESS

  • Ph.D. (2)

    • Rochefort - Beaudoin, Thomas. Topological optimization by deep learning.
    • Gamdani, Farid. Fatigue behaviour of hybrid joints (bolted/bonded).
  • Master (thesis) (2)

    • Fauchet, Elvire. Experimental simulation of cyclic multiaxial loading of a femoral implant.
    • Azarifar, Vahid. Optimization of the structure of an electrically propelled vehicle.
  • Professionnal master (1)

    • Benkirane, Ismael.

COMPLETED

  • Ph.D. Thesis (5)

    • Gamache, J.-F. (2021). On Topology Optimization in the Generative Design Framework : use on Aircraft Structure design (Ph.D. Thesis, Polytechnique Montréal). Retrieved from https://publications.polymtl.ca/9133/
    • Law-Kam Cio, Y.-S. (2021). Development of a Flexible Multiobjective Layout Design Tool for the Design of Mechatronic Systems with a Space Miniature Greenhouse Case Study (Ph.D. Thesis, Polytechnique Montréal). Retrieved from https://publications.polymtl.ca/6335/
    • Ouadday, R. (2018). Caractérisation mécanique des structures sandwichs utilisées comme extension d'avant-directrices des turbines hydroélectriques (Ph.D. Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/3809/
    • Luk-Cyr, J. (2017). Analyse et implantation d'un outil d'optimisation numérique des paramètres de martelage (Ph.D. Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/2577/
    • Morada, G. (2017). Experimental and numerical analysis of impact damage progression in sandwich structures designated for stay vane extensions in hydraulic turbines (Ph.D. Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/2913/
  • Master's Thesis (14)

    • Capo, M. (2021). Using Topology Optimization Techniques for Preliminary Design of Stiffened Panels (Master's Thesis, Polytechnique Montréal). Retrieved from https://publications.polymtl.ca/9173/
    • Nossovitch, A. (2019). A Mechanical and Economical Study on the Incorporation of Anti-Microbial Anodized Aluminum in Cooling Towers (Master's Thesis, Polytechnique Montréal). Retrieved from https://publications.polymtl.ca/4043/
    • Gervais, B. (2017). Étude des mécanismes de sollicitations et de rupture des plaques de compression à verrouillage lors de la marche (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/2530/
    • Vuillon, V. (2017). Optimisation par éléments finis de la géométrie de poutres en acier laminées à froid utilisées dans la construction de bâtiments (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/2732/
    • Lafait, M. (2015). Analyse du transfert de charge de joints boulonnés à simple recouvrement (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/1818/
    • Dugré, A. (2014). A Design Process Using Topology Optimization Applied to Flat Pressurized Stiffened Panels (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/1475
    • Ouadday, R. (2013). Étude des structures sandwichs verre/époxy de grandes épaisseurs utilisées comme extension d'avant directrices de turbines hydroélectriques (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/1180
    • Ouellet, M. (2013). Conception axiomatique des joints hybrides à recouvrement simple en matériaux composites (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/1153
    • Biron, G. (2011). Optimisation des assemblages par interférence soumis à des sollicitations de fatigue (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/651
    • Michel, L. (2010). Étude et caractérisation des phénomènes d'éclatement et d'explosion des pneus de camion (Master's Thesis, École Polytechnique de Montréal). Retrieved from https://publications.polymtl.ca/420
    • Divialle, A. (2008). Développement d'un algorithme avec prise en compte du remodelage osseux et de l'ostéo-intégration appliqué à une prothèse orthopédique (Master's Thesis, École Polytechnique de Montréal).
    • Lanoue, F. (2008). Modélisation et simulation des assemblages mécaniques par frettage sollicités en fatigue par la méthode des éléments finis (Master's Thesis, École Polytechnique de Montréal).
    • Turgeon, F. (2008). Nouveau modèle adimensionnel pour l'étude des assemblages boulonnés précontraints soumis à un chargement externe (Master's Thesis, École Polytechnique de Montréal).
    • Yang, J. (2007). Integrated numerical methods for optimization of gear trains (Master's Thesis, École Polytechnique de Montréal).

Press review about Aurelian Vadean

April 4, 2018, Apsam, Tarière de souffleuse : un grand projet pour sécuriser les travaux de déneigement C'est en 2015 que Polytechnique Montréal a été approchée afin de trouver une solution pour l'arrêt de la tarière lorsque certains critères étaient réunis. M. Achiche et M. Vadean, professeurs au Département de génie mécanique de Polytechnique, ont tout de suite accepté.
November 29, 2017, Radio-Canada, Facteur matinal - Entrevue d'actualité Monorail entre Québec et Montréal : Entrevue d'Aurelian Vadean, professeur adjoint au Département de génie mécanique de Polytechnique Montréal.