Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R.D., Piccirelli, N., Levesque, M. & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages. Tiré de https://doi.org/10.1016/j.compscitech.2022.109839
Répertoire des expertises
Therriault, Daniel

Répertoire des expertises
Therriault, Daniel
Répertoire des expertises
Publications par type
Article de revue (118)
Communication de conférence (104)
Livre
Chapitre de livre (2)
Brevet (9)
Rapport (28)
Thèse
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Daniel Therriault (261)
- Articles de revue (118)
- 2023
Article de revue Article de revue Lampron, O., Lingua, A., Therriault, D. & Levesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 12 pages. Tiré de https://doi.org/10.1016/j.addma.2022.103369Article de revue Costa-Baptista, J., Fotsing, E.R., Mardjono, J., Therriault, D. & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal. Tiré de https://doi.org/10.1108/RPJ-08-2022-0251Article de revue Pierre, J., Iervolino, F., Farahani, R.D., Piccirelli, N., Lévesque, M. & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages. Tiré de https://doi.org/10.1016/j.addma.2022.103344Article de revue Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D. & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 15 pages. Tiré de https://doi.org/10.1016/j.compositesa.2022.107307
- 2022
Article de revue Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Levesque, M. & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Tiré de https://doi.org/10.1016/j.matdes.2021.110358Article de revue Diouf-Lewis, A., Farahani, R.D., Iervolino, F., Pierre, J., Abderrefaie, Y., Lévesque, M., Piccirelli, N. & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 15 pages. Tiré de https://doi.org/10.1016/j.mtcomm.2022.103445Article de revue Costa-Baptista, J., Fotsing, E.R., Mardjono, J., Therriault, D. & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 17 pages. Tiré de https://doi.org/10.1016/j.addma.2022.102777Article de revue Zhang, C., Wang, C.-S., Therriault, D. & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 10 pages. Tiré de https://doi.org/10.1016/j.foodhyd.2022.107742Article de revue Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D. & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693. Tiré de https://doi.org/10.1016/j.addma.2022.102693Article de revue Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A. & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860. Tiré de https://doi.org/10.1039/d2ma00072eArticle de revue Lingua, A., Piccirelli, N., Therriault, D. & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 14 pages. Tiré de https://doi.org/10.1016/j.engfracmech.2022.108483Article de revue Tao, R., Granier, F. & Therriault, D. (2022). Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluid. Additive Manufacturing, 60, 11 pages. Tiré de https://doi.org/10.1016/j.addma.2022.103243Article de revue Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A. & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages. Tiré de https://doi.org/10.1016/j.apmt.2022.101596Article de revue Rafiee, M., Granier, F., Tao, R., Bherer-Constant, A., Chenier, G. & Therriault, D. (2022). Multi-Material, Multi-Process, Planar, and Nonplanar Additive Manufacturing of Piezoelectric Devices. Advanced Engineering Materials, 9 pages. Tiré de https://doi.org/10.1002/adem.202200294Article de revue Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N. & Levesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 13 pages. Tiré de https://doi.org/10.1016/j.compscitech.2022.109497Article de revue Schlachter, D.A., Lennox, M.D., Favis, B.D., Therriault, D. & Tavares, J.R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 10 pages. Tiré de https://doi.org/10.1021/acsomega.1c03857Article de revue Lennox, M.D., Hosseini Rad, S., Therriault, D., Favis, B.D. & Tavares, J.R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Tiré de https://doi.org/10.1021/acs.iecr.2c02315Article de revue Niknam, H., Akbarzadeh, A., Therriault, D. & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 14 pages. Tiré de https://doi.org/10.1016/j.apmt.2022.101529
- 2021
Article de revue Rafiee, M., Granier, F. & Therriault, D. (2021). Advances in Coaxial Additive Manufacturing and Applications. Advanced Materials Technologies, 6(11), 25 pages. Tiré de https://doi.org/10.1002/admt.202100356Article de revue Lampron, O., Therriault, D. & Levesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages. Tiré de https://doi.org/10.1016/j.cma.2021.114091Article de revue Trofimov, A., Le-Pavic, J., Therriault, D. & Levesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the Resin Transfer Molding manufactured 3D woven composites. International Journal of Solids and Structures, 210, 162-169. Tiré de https://doi.org/10.1016/j.ijsolstr.2020.11.012Article de revue Brzeski, D., Hia, I.L., Chauvette, J.-F., Farahani, R.D., Piccirelli, N., Ross, A. & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. Tiré de https://doi.org/10.1016/j.addma.2021.102245Article de revue Yazdani Sarvestani, H., Akbarzadeh, A.H., Therriault, D. & Levesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 13 pages. Tiré de https://doi.org/10.1016/j.compstruct.2021.113705Article de revue Chauvette, J.-F., Brzeski, D., Hia, I.L., Farahani, R.D., Piccirelli, N. & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 11 pages. Tiré de https://doi.org/10.1016/j.addma.2021.102294Article de revue Yanez-Sanchez, S.I., Lennox, M.D., Therriault, D., Favis, B.D. & Tavares, J.R. (2021). Model Approach for Binder Selection in Binder Jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Tiré de https://doi.org/10.1021/acs.iecr.1c02856Article de revue Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D. & Levesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 19 pages. Tiré de https://doi.org/10.1016/j.compositesa.2020.106145Article de revue Zou, S., Therriault, D. & Gosselin, F.P. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43, 9 pages. Tiré de https://doi.org/10.1016/j.eml.2021.101208
- 2020
Article de revue Rafiee, M., Farahani, R.D. & Therriault, D. (2020). Multi-Material 3D and 4D Printing: A Survey. Advanced Science Letters, 7(12), 26 pages. Tiré de https://doi.org/10.1002/advs.201902307
- 2019
Article de revue Rajesh, P.S.M., Delaroa, C., Gagne, M., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. Tiré de https://doi.org/10.1016/j.mtcomm.2018.11.002Article de revue Cusson, E., Akbarzadeh, A.H., Therriault, D. & Rodrigue, D. (2019). Density graded polyethylene foams: Effect of processing conditions on mechanical properties. Cellular Polymers, 38(1-2), 3-14. Tiré de https://doi.org/10.1177/0262489319839632Article de revue Wei, H., Cauchy, X., Navas, I.O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J. & Therriault, D. (2019). Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications. ACS Applied Materials and Interfaces, 11(27), 24523-24532. Tiré de https://doi.org/10.1021/acsami.9b04245Article de revue Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D. & Levesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. Tiré de https://doi.org/10.1016/j.engfracmech.2019.106485Article de revue Tabiai, I., Texier, D., Bocher, P., Therriault, D. & Levesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. Tiré de https://doi.org/10.1007/s11340-019-00541-zArticle de revue Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D. & L'Esperance, G. (2019). Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports. ACS Applied Materials and Interfaces, 11(8), 8499-8506. Tiré de https://doi.org/10.1021/acsami.8b19986Article de revue Mirabolghasemi, A., Akbarzadeh, A.H., Rodrigue, D. & Therriault, D. (2019). Thermal conductivity of architected cellular metamaterials. Acta Materialia, 174, 61-80. Tiré de https://doi.org/10.1016/j.actamat.2019.04.061
- 2018
Article de revue Niknam, H., Akbarzadeh, A.H., Rodrigue, D. & Therriault, D. (2018). Architected multi-directional functionally graded cellular plates. Materials and Design, 148, 188-202. Tiré de https://doi.org/10.1016/j.matdes.2018.02.058Article de revue Bodkhe, S., Noonan, C., Gosselin, F.P. & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 6 pages. Tiré de https://doi.org/10.1002/adem.201800206Article de revue Rajesh, P.S.M., Sirois, F. & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55. Tiré de https://doi.org/10.1016/j.matdes.2017.10.017Article de revue Wu, Q., Zou, S., Gosselin, F.P., Therriault, D. & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186. Tiré de https://doi.org/10.1039/C8TC02883DArticle de revue Xu, C., Wu, Q., L'Esperance, G., Laberge Lebel, L. & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials and Design, 160, 262-269. Tiré de https://doi.org/10.1016/j.matdes.2018.09.024Article de revue Zou, S., Therriault, D. & Gosselin, F.P. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785. Tiré de https://doi.org/10.1039/c8sm01589aArticle de revue Cauchy, X., Sapieha, J.-E. & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12). Tiré de https://doi.org/10.1002/adem.201800541Article de revue Tabiai, I., Delorme, R., Therriault, D. & Levesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467. Tiré de https://doi.org/10.1007/s11340-018-0429-9Article de revue Diehl, P., Tabiai, I., Baumann, F.W., Therriault, D. & Levesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26. Tiré de https://doi.org/10.1016/j.engfracmech.2018.04.030Article de revue Che, H., Gagné, M., Rajesh, P.S.M., Sapieha, J.E., Sirois, F., Therriault, D. & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. Tiré de https://doi.org/10.1007/s11665-018-3609-yArticle de revue Wu, Q., Therriault, D. & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652. Tiré de https://doi.org/10.1021/acsbiomaterials.8b00415Article de revue Bodkhe, S., Rajesh, P.S.M., Gosselin, F.P. & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Tiré de https://doi.org/10.1021/acsaem.7b00337
- 2017
Article de revue Wallin, T.J., Pikul, J.H., Bodkhe, S., Peele, B.N., Mac Murray, B.C., Therriault, D., McEnerney, B.W., Dillon, R.P., Giannelis, E.P. & Shepherd, R.F. (2017). Click chemistry stereolithography for soft robots that self-heal. Journal of Materials Chemistry B, 5(31), 6249-6255. Tiré de https://doi.org/10.1039/c7tb01605kArticle de revue Wu, Q., Maire, M., Lerouge, S., Therriault, D. & Heuzey, M.-C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Advanced Biosystems, 1(6), 6 pages. Tiré de https://doi.org/10.1002/adbi.201700058Article de revue Bodkhe, S., Turcot, G., Gosselin, F.P. & Therriault, D. (2017). One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Tiré de https://doi.org/10.1021/acsami.7b04095Article de revue Aïssa, B., Nedil, M., Belaidi, A., Isaifan, R.J., Bentouaf, A., Fauteux, C. & Therriault, D. (2017). Photoluminescence quenching, structures, and photovoltaic properties of ZnO nanostructures decorated plasma grown single walled carbon nanotubes. Journal of Nanoparticle Research, 19, 8 pages. Tiré de https://doi.org/10.1007/s11051-017-3854-2Article de revue Xu, C., Bouchemit, A., L'Esperance, G., Laberge Lebel, L. & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455. Tiré de https://doi.org/10.1039/c7tc02884aArticle de revue Cauchy, X., Klemberg-Sapieha, J.E. & Therriault, D. (2017). Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Applied Materials & Interfaces, 9(34), 29010-29020. Tiré de https://doi.org/10.1021/acsami.7b06526Article de revue Chizari, K., Arjmand, M., Liu, Z., Sundararaj, U. & Therriault, D. (2017). Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications. Materials Today Communications, 11, 112-118. Tiré de https://doi.org/10.1016/j.mtcomm.2017.02.006
- 2016
Article de revue Hughes, V., Tabiai, I., Chizari, K. & Therriault, D. (2016). 3D printable conductive nanocomposites of PLA and multi‑walled carbon nanotubes1. Material Matters, 11(2), 61-63. Tiré de http://www.sigmaaldrich.com/technical-documents/articles/material-matters/3d-printable-conductive-nanocomposites.htmlArticle de revue Chizari, K., Daoud, M.A., Ravindran, A.R. & Therriault, D. (2016). 3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors. Small, 12(44), 6076-6082. Tiré de https://doi.org/10.1002/smll.201601695Article de revue Farahani, R.D., Gagne, M., Klemberg-Sapieha, J.E. & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Tiré de https://doi.org/10.1002/adem.201500544Article de revue Chizari, K., Daoud, M.A., Ravindran, A.R. & Therriault, D. (2016). Liquid Materials: 3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors (Small 44/2016). Small, 12(44), 6176-6176. Tiré de https://doi.org/10.1002/smll.201670232Article de revue Dalir, H., Farahani, R.D., Hernandez, L., Aldebert, C., Levesque, M. & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771. Tiré de https://doi.org/10.1166/jnn.2016.10638Article de revue Farahani, R.D., Dube, M. & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), 5794-5821. Tiré de https://doi.org/10.1002/adma.201506215
- 2015
Article de revue Guo, S.-Z., Yang, X., Heuzey, M.-C. & Therriault, D. (2015). 3D printing of a multifunctional nanocomposite helical liquid sensor. Nanoscale, 7(15), 6451-6456. Tiré de https://doi.org/10.1039/c5nr00278hArticle de revue Arguin, M., Sirois, F. & Therriault, D. (2015). Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites. Advanced Manufacturing Polymer & Composites Science, 1(1), 16-25. Tiré de https://doi.org/10.1179/2055035914Y.0000000003Article de revue Farahani, R.D., Klemberg-Sapieha, J.E. & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182. Tiré de https://doi.org/10.1016/j.matdes.2015.09.088Article de revue Passieux, R., Guthrie, L., Rad, S.H., Lévesque, M., Therriault, D. & Gosselin, F.P. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680. Tiré de https://doi.org/10.1002/adma.201500603Article de revue Najafi, N., Heuzey, M.-C., Carreau, P.J., Therriault, D. & Park, C.B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465. Tiré de https://doi.org/10.1016/j.eurpolymj.2015.11.003Article de revue Najafi, N., Heuzey, M.C., Carreau, P. & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845. Tiré de https://doi.org/10.1007/s00397-015-0874-7Article de revue Lanouette, A.-M., Potvin, M.-J., Martin, F., Houle, D. & Therriault, D. (2015). Residual mechanical properties of a carbon fibers/PEEK space robotic arm after simulated orbital debris impact. International Journal of Impact Engineering, 84, 78-87. Tiré de https://doi.org/10.1016/j.ijimpeng.2015.05.010
- 2014
Article de revue Guérin, N., Lévesque, M. & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Tiré de https://doi.org/10.4236/jbise.2014.79064Article de revue Gagne, M. & Therriault, D. (2014). Lightning strike protection of composites. Progress in Aerospace Sciences, 64, 1-16. Tiré de https://doi.org/10.1016/j.paerosci.2013.07.002Article de revue Dermanaki-Farahani, R., Laberge Lebel, L. & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments, (85). Tiré de https://doi.org/10.3791/51512Article de revue Farahani, R.D., Laberge Lebel, L. & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5). Tiré de https://doi.org/10.1088/0960-1317/24/5/055020Article de revue Guo, S.-Z., Heuzey, M.-C. & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150. Tiré de https://doi.org/10.1021/la4036425Article de revue Najafi, N., Heuzey, M.-C., Carreau, P.J., Therriault, D. & Park, C.B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Tiré de https://doi.org/10.1007/s00397-014-0801-3Article de revue Farahani, R.D., Chizari, K. & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), 10470-10485. Tiré de https://doi.org/10.1039/c4nr02041c
- 2013
Article de revue Moussaddy, H., Therriault, D. & Levesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828. Tiré de https://doi.org/10.1016/j.ijsolstr.2013.07.016Article de revue Aissa, B., Nedil, M., Habib, M.A., Haddad, E., Jamroz, W., Therriault, D., Coulibaly, Y. & Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6). Tiré de https://doi.org/10.1063/1.4817861Article de revue Guo, S.-Z., Gosselin, F., Guerin, N., Lanouette, A.-M., Heuzey, M.-C. & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Tiré de https://doi.org/10.1002/smll.201300975
- 2012
Article de revue Aissa, B., Nedil, M., Esam, A.H., Tabet, N., Therriault, D. & Rosei, F. (2012). Ambipolar operation of hybrid SiC-carbon nanotube based thin film transistors for logic circuits applications. Applied Physics Letters, 101(4). Tiré de https://doi.org/10.1063/1.4739939Article de revue Farahani, R.D., Dalir, H., Le Borgne, V., Gautier, L.A., El Khakani, M.Y.A., Levesque, M. & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502. Tiré de https://doi.org/10.1088/0957-4484/23/8/085502Article de revue Aissa, B., Therriault, D., Farahani, R.D., Laberge Lebel, L. & El Khakani, M.A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11), 8 pages. Tiré de https://doi.org/10.1088/0957-4484/23/11/115705Article de revue Aissa, B., Tabet, N., Nedil, M., Therriault, D., Rosei, F. & Nechache, R. (2012). Electromagnetic Energy Absorption Potential and Microwave Heating Capacity of Sic Thin Films in the 1-16 Ghz Frequency Range. Applied Surface Science, 258(14), 5482-5485. Tiré de https://doi.org/10.1016/j.apsusc.2012.02.047Article de revue Farahani, R.D., Pahlavanpour, M., Dalir, H., Aissa, B., El Khakani, M.Y.A., Levesque, M. & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225. Tiré de https://doi.org/10.1016/j.matdes.2012.05.005Article de revue Aissa, B., Haddad, E., Jamroz, W., Hassani, S., Farahani, R.D., Merle, P.G. & Therriault, D. (2012). Micromechanical Characterization of Single-Walled Carbon Nanotube Reinforced Ethylidene Norbornene Nanocomposites for Self-Healing Applications. Smart Materials and Structures, 21(10). Tiré de https://doi.org/10.1088/0964-1726/21/10/105028Article de revue Dalir, H., Farahani, R.D., Nhim, V., Samson, B., Lévesque, M. & Therriault, D. (2012). Preparation of highly exfoliated polyester–clay nanocomposites: process–property correlations. Langmuir, 28(1), 791-803. Tiré de https://doi.org/10.1021/la203331hArticle de revue Farahani, R.D., Dalir, H., Le Borgne, V., Gautier, L.A., El Khakani, M.A., Levesque, M. & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin-streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395. Tiré de https://doi.org/10.1016/j.compscitech.2012.05.010Article de revue Aissa, B., Therriault, D., Haddad, E. & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, 17 pages. Tiré de https://doi.org/10.1155/2012/854203
- 2011
Article de revue Assa, B., Nechache, R., Therriault, D., Rosei, F. & Nedil, M. (2011). High-frequency electromagnetic properties of epitaxial Bi 2FeCrO6 thin films grown by pulsed laser deposition. Applied Physics Letters, 99(18). Tiré de https://doi.org/10.1063/1.3657528Article de revue Farahani, R.D., Dalir, H., Aissa, B., El Khakani, M.A., Levesque, M. & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Tiré de https://doi.org/10.1016/j.compositesa.2011.08.016Article de revue Aissa, B., Therriault, D. & El Khakani, M.A. (2011). On-substrate growth of single-walled carbon nanotube networks by an "all-laser" processing route. Carbon, 49(8), 2795-2808. Tiré de https://doi.org/10.1016/j.carbon.2011.03.006Article de revue Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L. & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8). Tiré de https://doi.org/10.1063/1.3574443
- 2010
Article de revue Laberge Lebel, L., Aissa, B., Khakani, M.A.E. & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), 518-524. Tiré de https://doi.org/10.1016/j.compscitech.2009.12.004Article de revue Kuhn, M., Napporn, T.W., Meunier, M. & Therriault, D. (2010). Single-chamber micro solid oxide fuel cells: Study of anode and cathode materials in coplanar electrode design. Solid State Ionics, 181(5-7), 332-337. Tiré de https://doi.org/10.1016/j.ssi.2010.01.012Article de revue Laberge Lebel, L., Aissa, B., El Khakani, M.A. & Therriault, D. (2010). Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Advanced Materials, 22(5), 592-596. Tiré de https://doi.org/10.1002/adma.200902192
- 2009
Article de revue Ghafar-Zadeh, E., Sawan, M., Therriault, D., Rajagopalan, S. & Chodavarapu, V.P. (2009). A direct-write microfluidic fabrication process for CMOS-based lab-on-chip applications. Microelectronic Engineering, 86(10), 2104-2109. Tiré de https://doi.org/10.1016/j.mee.2009.02.011Article de revue Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2009). A microfluidic packaging technique for lab-on-chip applications. IEEE Transactions on Advanced Packaging, 32(2), 410-416. Tiré de https://doi.org/10.1109/tadvp.2008.920655Article de revue Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2009). CMOS based capacitive sensor laboratory-on-chip: A multidisciplinary approach. Analog Integrated Circuits and Signal Processing, 59(1), 1-12. Tiré de https://doi.org/10.1007/s10470-008-9239-9Article de revue Lourdel, N., Therriault, D. & Levesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017. Tiré de https://doi.org/10.1088/0960-1317/19/9/095017Article de revue Fauteux, C., Khakani, M.A.E., Pegna, J. & Therriault, D. (2009). Influence of solution parameters for the fast growth of ZnO nanostructures by laser-induced chemical liquid deposition. Applied Physics. A, Materials Science & Processing, 94(4), 819-829. Tiré de https://doi.org/10.1007/s00339-008-4857-8Article de revue Kuhn, M., Napporn, T.W., Meunier, M., Vengallatore, S. & Therriault, D. (2009). Miniaturization Limits for Single-Chamber Micro-Solid Oxide Fuel Cells With Coplanar Electrodes. Journal of Power Sources, 194(2), 941-949. Tiré de https://doi.org/10.1016/j.jpowsour.2009.05.034Article de revue Aissa, B., Fauteux, C., Khakani, M.A.E. & Therriault, D. (2009). Structural and photoluminescence properties of laser processed ZnO/carbon nanotube nanohybrids. Journal of Materials Research, 24(11), 3313-3320. Tiré de https://doi.org/10.1557/jmr.2009.0421Article de revue Laberge Lebel, L., Aissa, B., Paez, O.A., El Khakani, M.A. & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12), 7 pages. Tiré de https://doi.org/10.1088/0960-1317/19/12/125009
- 2008
Article de revue Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2008). A 0.18-μm CMOS capacitive sensor Lab-on-Chip. Sensors and Actuators A: Physical, 141(2), 454-462. Tiré de https://doi.org/10.1016/j.sna.2007.10.007Article de revue Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M. & Therriault, D. (2008). Direct-dispense polymeric wavesguides platform for optical chemical sensors. Sensors, 8(12), 7636-7648. Tiré de https://doi.org/10.3390/s8127636Article de revue Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S. & Therriault, D. (2008). Direct-Write Microfabrication of Single-Chamber Micro Solid Oxide Fuel Cells. Journal of Micromechanics and Microengineering, 18(1). Tiré de https://doi.org/10.1088/0960-1317/18/1/015005Article de revue Kuhn, M., Napporn, T.W., Meunier, M. & Therriault, D. (2008). Experimental Study of Current Collection in Single-Chamber Micro Solid Oxide Fuel Cells With Comblike Electrodes. Journal of the Electrochemical Society, 155(10), B994-B1000. Tiré de https://doi.org/10.1149/1.2958311Article de revue Kuhn, M., Napporn, T., Meunier, M., Therriault, D. & Vengallatore, S. (2008). Fabrication and Testing of Coplanar Single-Chamber Micro Solid Oxide Fuel Cells With Geometrically Complex Electrodes. Journal of Power Sources, 177(1), 148-153. Tiré de https://doi.org/10.1016/j.jpowsour.2007.11.013Article de revue Bey-Oueslati, R., Palm, S.J., Therriault, D. & Martel, S. (2008). High speed direct-write for rapid fabrication of three-dimensional microfluidic devices. International Journal of Heat and Technology, 26(1), 125-131. Tiré de http://wiki.polymtl.ca/nano/images/a/a1/J-2008-MHP-IJHT-Ramzi.pdfArticle de revue Ghafar-Zadeh, E., Sawan, M., Therriault, D. & Miled, A. (2008). Laboratoires-sur-puces: Une nouvelle technologie de diagnostic cellulaire et moléculaire. IEEE Canadian Review, (58), 20-22. Tiré de http://canrev.ieee.ca/static-content/cr58/IEEECanadianReview_no58.pdfArticle de revue Longtin, R., Fauteux, C., Carignan, L.P., Therriault, D. & Pegna, J. (2008). Laser-Assisted Synthesis of Carbon Nanofibers: From Arrays to Thin Films and Coatings. Surface and Coatings Technology, 202(12), 2661-2669. Tiré de https://doi.org/10.1016/j.surfcoat.2007.09.045Article de revue Bruneaux, J., Therriault, D. & Heuzey, M.C. (2008). Micro-Extrusion of Organic Inks for Direct-Write Assembly. Journal of Micromechanics and Microengineering, 18(11), 115020. Tiré de https://doi.org/10.1088/0960-1317/18/11/115020Article de revue Oueslati, R.B., Therriault, D. & Martel, S. (2008). PCB-Integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated With the Direct-Write Method. IEEE Transactions on Components and Packaging Technologies, 31(4), 869-874. Tiré de https://doi.org/10.1109/TCAPT.2008.2004773
- 2007
Article de revue Therriault, D. (2007). Biosensors : Filling the gap. Nature Nanotechnology, 2(7), 393-394. Tiré de https://doi.org/10.1038/nnano.2007.199Article de revue Fauteux, C., Longtin, R., Pegna, J. & Therriault, D. (2007). Fast Synthesis of ZnO Nanostructures by Laser-Induced Decomposition of Zinc Acetylacetonate. Inorganic Chemistry, 46(26), 11036-11047. Tiré de https://doi.org/10.1021/ic700915zArticle de revue Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2007). Novel Direct-Write Cmos-Based Laboratory-on-Chip: Design, Assembly and Experimental Results. Sensors and Actuators A: Physical, 134(1), 27-36. Tiré de https://doi.org/10.1016/j.sna.2006.05.022Article de revue Therriault, D., White, S.R. & Lewis, J.A. (2007). Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly. Applied Rheology, 17(1), 10112-1 - 10112-8. Tiré de https://doi.org/10.1515/arh-2007-0001Article de revue Longtin, R., Carignan, L.P., Fauteux, C., Therriault, D. & Pegna, J. (2007). Selective Area Synthesis of Aligned Carbon Nanofibers by Laser-Assisted Catalytic Chemical Vapor Deposition. Diamond and Related Materials, 16(8), 1541-1549. Tiré de https://doi.org/10.1016/j.diamond.2006.12.055
- 2005
Article de revue Therriault, D., Shepherd, R.F., White, S.R. & Lewis, J.A. (2005). Fugitive Inks for Direct-Write Assembly of Three-Dimensional Microvascular Networks. Advanced Materials, 17(4), 395-399. Tiré de https://doi.org/10.1002/adma.200400481
- 2023
- Communications de conférence (104)
- 2022
Communication de conférence Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F. & Therriault, D. (2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft. Communication présentée à 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa (p. 170-175). Tiré de https://doi.org/10.1109/ICLP56858.2022.9942518Communication de conférence Le Gentil, T., Therriault, D. & Kerbrat, O. (2022). Energy efficiency-oriented deision-making for additive manufacturing with carbon-fibre-reinforced polyamide 12. Communication présentée à 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.Communication de conférence Lingua, A., Picirelli, N., Therriault, D. & Lévesque, M. (2022). In-situ full-field measurements for 3D printed composites under interlayer delamination. Communication présentée à 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.Communication de conférence Costa-Baptista, J., Fotsing, E.R., Mardjano, J., Therriault , D. & Ross, A. (2022). Multilayered microchannels for high absorption at different frequency ranges. Communication présentée à 28th International Congress on Sound and Vibration (ICSV 2022).Communication de conférence Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F. & Therriault, D. (2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures. Communication présentée à 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa (p. 250-255). Tiré de https://doi.org/10.1109/ICLP56858.2022.9942506
- 2021
Communication de conférence Pierre, J., Iervolino, F., Piccirelli, N. & Therriault, D. (2021). Additive manufacturing of composite sandwich panels for acoustic applications. Communication présentée à 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.Communication de conférence Latko-Durałek, P., Santonja Soto, F. & Therriault, D. (2021). A safe green ink for solvent-cast 3D printing. Communication présentée à 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.Communication de conférence Therriault, D. & Farahani, R.D. (2021). Design of multifunctional composites and their advanced additive manufacturing. Communication présentée à Additive Fabrication of Composites (ADDFABCONF 2021), Online. Tiré de https://addfabcomp2021.sciencesconf.org/data/program/18_Therriault_et_al.pdfCommunication de conférence Farahani, R.D., Brzeski, D., Hia, I.L., Diouf-Lewis, A., Piccirelli, N. & Therriault, D. (2021). 3D printing of abradable polymer composite materials: Materials formulations and characterization. Communication présentée à 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.Communication de conférence Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R.D., Piccirelli, N. & Therriault, D. (2021). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments. Communication présentée à 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.Communication de conférence Hu, S., Lingua, A., Lengaigne, J., Levesque, M., Therriault, D., Walch, D. & Tabiai, I. (2021). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Résumé]. Présenté à Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada. Tiré de https://doi.org/10.32393/csme.2021.164Communication de conférence Lingua, A., Piccirelli, N., Therriault, D. & Lévesque, M. (2021). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination. Communication présentée à 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.Communication de conférence Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D. & Ross, A. (2021). Multilayer treatment for subwavelength and broad absorption. Communication présentée à 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA (p. 2219-2227). Tiré de https://doi.org/10.3397/IN-2021-2076Communication de conférence Sosa-Rey, F., Piccirelli, N., Therriault, D. & Lévesque, M. (2021). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites. Communication présentée à International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US.
- 2020
Communication de conférence Diouf-Lewis, A., Mastromatteo, L., Farahani, R.D., Piccirelli, N. & Therriault, D. (2020). Characterization and additive manufacturing of aerospace-grade thermoplastics composites. Communication présentée à 7th Global Conference on Polymer and Composite Materials (PCM 2020), Online.
- 2019
Communication de conférence Iervolino, F., Pierre, J., Piccirelli, N. & Therriault, D. (2019). Additive manufacturing of composite sandwich panels for broadband sound absorption [Présentation orale]. Présenté à International Conference on Composite Materials (ICCM22), Melbourne, Australia.Communication de conférence Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R.D., Piccirelli, N. & Therriault, D. (2019). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Présentation orale]. Présenté à 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia.Communication de conférence Farahani, R.D. & Therriault, D. (2019). Design of multifunctional composites and their multi-material additive manufacturing [Résumé]. Présenté à International Conference on Advances in Functional Materials, Washington, DC, United States. Tiré de https://functionalmaterials.org/afm2019/wp-content/uploads/2019/08/abstract-book-afm-19.pdfCommunication de conférence Therriault, D. & Farahani, R.D. (2019). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Présentation orale]. Présenté à 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia.Communication de conférence Costa-Baptista, J., Fotsing, E.R., Therriault, D. & Ross, A. (2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations. Communication présentée à 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Chauvette, J.-F., Piccirelli, N. & Therriault, D. (2019). Rapid direct deposition of filled polymer on non-planar surface. Communication présentée à 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montréal, Qc, Canada (p. 155-156). Tiré de http://icast2019.encs.concordia.ca/files/UserDownload/ICAST2019%20-%20Conference%20Program.pdf
- 2018
Communication de conférence Farahani, R.D. & Therriault, D. (2018). Advanced additive manufacturing of multifunctional composites. Communication présentée à Society of Engineering Science (SES 2018), Madrid, Spain.Communication de conférence Therriault, D. (2018). Advanced additive manufacturing of multifunctional composites. Communication présentée à Gordon Research Conference, Symposium on Multifunctional materials (GRC 2018), Ventura, United States.Communication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L. & Therriault, D. (2018). 3D printing of metallic structures from a green ink. Communication présentée à CSME International Congress, Toronto, Ontario, Canada. Tiré de https://yorkspace.library.yorku.ca/xmlui/bitstream/handle/10315/35235/CSME2018_paper_77.pdf?sequence=1&isAllowed=y
- 2017
Communication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L. & Therriault, D. (2017). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.Communication de conférence Bodkhe, S., Testoni, O., Gosselin, F.P. & Therriault , D. (2017). 3D printing active piezoelectric sensors in a single step. Communication présentée à 8th New Mech, Boston, MA, USA.Communication de conférence Abderrafai, Y., Barthelat, F. & Therriault, D. (2017). 3D printing of bioinspired functionally graded composites. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.Communication de conférence Wu, Q., Heuzey, M.C. & Therriault, D. (2017). 3D printing of chitosan-based nanocomposites for electronic applications. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.Communication de conférence Gosselin, F.P., Zou, S. & Therriault, D. (2017). Failure mechanisms of instability-assisted 3D printed microstructured fibers. Communication présentée à 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Tiré de http://www.iccm-central.org/Proceedings/ICCM21proceedings/papers/4197.pdfCommunication de conférence Zou, S., Zulkifli, H.Z., Therriault, D. & Gosselin, F.P. (2017). Failure mechanisms of poly(lactic acid) fibers featuring microstructured sacrificial bonds. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.Communication de conférence Zou, D., Therriault, D. & Gosselin, F.P. (2017). Finite element simulation of microstructured fibers with sacrificial bonds. Communication présentée à International conference in aerospace for young scientists (ICAYS 2017), Beijing, China.Communication de conférence Bodkhe, S., Noonan, C., Gosselin, F.P. & Therriault, D. (2017). One-step piezoelectric sensors for smart textiles. Communication présentée à 15th Expo Hightex, Montréal, Québec.Communication de conférence Bodkhe, S., Noonan, C., Gosselin, F.P. & Therriault, D. (2017). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.Communication de conférence Wei, H., Cauchy, X., Abderrafai, Y., Leng, J. & Therriault, D. (2017). Solvent-cast 3D printing of superior conductive hybrid particles based nanocomposites. Communication présentée à 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.
- 2016
Communication de conférence Mahdavi, H., Abderrafai, Y., Piccirelli, N., Pautard, S. & Therriault, D. (2016). Anisotropic properties of 3D printed nylon by fused deposition modelling technique. Communication présentée à 6th International conference on engineering and applied sciences (ICEAS 2016), Vancouver, Canada.Communication de conférence Abderrafai, Y., Barthelat, F. & Therriault, D. (2016). Design and 3D printing of polymer/ceramic composite structures [Affiche]. Présenté à International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.Communication de conférence Therriault, D. (2016). 3D printing of multifunctional composites and polymers. Communication présentée à Gordon Research Conference, Symposium on Multifunctional materials, Ventura, USA.Communication de conférence Bodkhe, S., Gosselin, F.P. & Therriault, D. (2016). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF. Communication présentée à International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Tiré de https://iutam.org/wp-content/uploads/2017/02/ICTAM_Proceedings_Vol_3.pdfCommunication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L. & Therriault, D. (2016). Three-dimensional direct-write printing of metallic microstructures [Affiche]. Présenté à International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.Communication de conférence Zou, S., Therriault, D. & Gosselin, F.P. (2016). Unfolding process of coiling fibers fabricated by instability-assisted fused deposition modeling. Communication présentée à International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Tiré de https://iutam.org/wp-content/uploads/2017/02/ICTAM_Proceedings_Vol_3.pdf
- 2015
Communication de conférence Therriault, D. (2015). Design of multifunctional composites and their use for the 3D printing of microsystems. Communication présentée à Composites at Lake Louise 2015, Lake Louise, Canada. Tiré de https://www.proceedings.com/31359.htmlCommunication de conférence Chizari, K., Daoud, M.A., Ravindran, A.R. & Therriault, D. (2015). 3D printing of conductive nanocomposites for liquid sensor application. Communication présentée à 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark. Tiré de http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-1103-4.pdfCommunication de conférence Bodkhe, S. & Therriault , D. (2015). 3D printing of nanocomposites for mechanical microsystems. Communication présentée à S.NET 2015 : From Nanotechnologies to Emerging Technologies Towards a Global Responsibility, Montréal, Qc, Canada.Communication de conférence Rajesh, P.S.M., Gagne, M., Cauchy, X., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2015). Lightning protection of wet metalized polymer composites. Communication présentée à 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Tiré de http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-P201-16.pdfCommunication de conférence Bodkhe, S., Gosselin, F.P. & Therriault, D. (2015). Three-dimensional printing of polyvinylidene fluoride nanocomposites. Communication présentée à 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Tiré de http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-4321-2.pdfCommunication de conférence P S M, R., Cauchy, X., Gagne, M., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2015). Wet chemical metallization of aerospace composites as a lightning protection strategy. Communication présentée à TMS 2015 Annual Meeting & Exhibition, Orlando, Florida (p. 187-192). Tiré de https://doi.org/10.1002/9781119179856.ch18
- 2014
Communication de conférence Chizari, K. & Therriault, D. (2014). Conductive filaments from CNTs/PLA composites [Affiche]. Présenté à ASME International Mechanical Engineering Congress & Exposition, Montréal, Québec.Communication de conférence Passieux, R., Therriault, D. & Gosselin, F. (2014). Creation of Sacrificial Bonds by Viscous Flow Instability. Communication présentée à ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (p. V014T11A002-V014T11A002). Tiré de https://doi.org/10.1115/IMECE2014-38877Communication de conférence Lanouette, A.M., Potvin, M.J., Martin, F., Mondor, S., Houle, D. & Therriault, D. (2014). Experimental Evaluation of the Canadarm2 Residual Flexural Strength After an Orbital Debris Impact. Communication présentée à 13th European Conference on Spacecraft Structures, Materials & Environmental Testing, Braunschweig, Germany (p. 903-908). Tiré de https://ui.adsabs.harvard.edu/abs/2014ESASP.727E.158L/abstractCommunication de conférence Chizari, K. & Therriault, D. (2014). Fabrication of Conductive Microfilaments and Liquid Sensor from CNTs/PLA Nanocomposites. Communication présentée à 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada (p. 214-221). Tiré de http://dpi-proceedings.com/index.php/dmac2014/article/view/21300Communication de conférence Aissa, B., Hena-Zamal, H., Asgar-Khan, M., Haddad, E., Therriault, D. & Rosei, F. (2014). Fabrication of 3D micro-vascular network based carbon nanotube materials by the direct-write microfluidic infiltration approach for self healing applications. Communication présentée à Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec (p. 2957-2963).Communication de conférence Cauchy, X., Klemberg-Sapieha, J.E. & Therriault, D. (2014). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis. Communication présentée à 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states. Tiré de http://toc.proceedings.com/23953webtoc.pdfCommunication de conférence Cauchy, X., Klemberg-Sapieha, J.-E. & Therriault, D. (2014). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites. Communication présentée à Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida.Communication de conférence Talwar, B.S., Guo, S., Chizari, K. & Therriault, D. (2014). Investigation of carbon nanotubes mixing methods and functionalizations for electrically conductive polymer composites. Communication présentée à ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (5 pages). Tiré de https://doi.org/10.1115/IMECE2014-39970Communication de conférence Bodkhe, S., Gosselin, F.P. & Therriault, D. (2014). Three-dimensional structures with polyvinylidene fluoride. Communication présentée à ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec.
- 2013
Communication de conférence Lanouette, A.-M., Hill, J., Demers-Dussault, P., Laurin, J.-J. & Therriault, D. (2013). 3D printing of double KA band helical micro-antennas. Communication présentée à Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states (p. 416-419). Tiré de https://briefs.techconnect.org/papers/3d-printing-of-double-ka-band-helical-antenna/Communication de conférence Guerin, N., Levesque, M. & Therriault, D. (2013). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique. Communication présentée à Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states (p. 150-153). Tiré de https://briefs.techconnect.org/papers/dual-helix-dielectrophoretic-cell-separator-fabricated-using-the-direct-write-spindle-deposition-technique/Communication de conférence Farahani, R.D. & Therriault, D. (2013). Electrical conductivity of hybrid/patterned nanocomposites films. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FAR80682.pdfCommunication de conférence Arguin, M., Sirois, F. & Therriault, D. (2013). Electric field alignement of multi-wall carbon nanotuves in epoxy matrix in order to establish preferential current path flows. Communication présentée à Composites Week@Leuven, Leuven, Belgium.Communication de conférence Arguin, M., Sirois, F. & Therriault, D. (2013). Impact of carbon nanotubes on electrical conductivity of carbon fiber multiscale composites. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/ARG80675.pdfCommunication de conférence Farahani, R.D., Klemberg-Sapieha, J.E. & Therriault, D. (2013). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution. Communication présentée à 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states (p. 1011-1021). Tiré de https://www.proceedings.com/19653.htmlCommunication de conférence Chatel, T., Lévesque, M. & Therriault, D. (2013). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications. Communication présentée à 9th International conference on mechanics of time-dependent materials, Montréal, Québec.Communication de conférence Aïssa, B., Therriault, D., Haddad, E., Jamroz, W., Tagziria, K., Loiseau, J., Higgins, A., Khan, M.A. & Hoa, S.V. (2013). Mitigating the effects of space debris on composite structures embedding self healing and carbon nanotube nanocomposite materials. Communication présentée à 4th International Conference on Self-Healing Materials, Ghent, Belgium.Communication de conférence Moussaddy, H., Therriault, D. & Lévesque, M. (2013). Modeling elastic properties of randomly oriented fiber composites. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/MOU80643.pdfCommunication de conférence Guo, S.Z., Heuzey, M.-C. & Therriault, D. (2013). Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/GUO80976.pdf
- 2012
Communication de conférence Gosselin, F.P., Therriault, D. & Levesque, M. (2012). Microfabrication of a spider-silk analogue through the liquid rope coiling instability. Communication présentée à APS March Meeting, Boston, MA, USA. Tiré de http://meetings.aps.org/Meeting/MAR12/Event/161538Communication de conférence Farahani, R.D., Lévesque, M. & Therriault, D. (2012). Nanocomposite materials in three-dimensional freestanding microsensors. Communication présentée à NanoQuebec, Montréal, Québec.Communication de conférence Guo, S.-Z., Heuzey, M.-C. & Therriault, D. (2012). Solvent-cast direct-write microfabrication of thermoplastic polymer nanocomposites 3D structures. Communication présentée à NanoQuebec, Montréal, Québec.
- 2011
Communication de conférence Moussaddy, H., Lévesque, M. & Therriault, D. (2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites. Communication présentée à 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Tiré de https://app.knovel.com/hotlink/pdf/rcid:kpPASCTS03/id:kt010S8E01/93-comparing-finite-element-and-analytical-micromechanical-modeling-of-randomly-oriented-single-walled-carbon-nanotubes-reinforced-nanocompositesCommunication de conférence Moussaddy, H., Lévesque, M. & Therriault, D. (2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés. Communication présentée à 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Tiré de https://hal.archives-ouvertes.fr/hal-00598129Communication de conférence Aïssa, B., Haddad, E., Tagziria, K., Jamroz, W., Asgar-Khan, M., Hoa, S.V., Verreault, J., Higgins, A. & Therriault, D. (2011). Exploring self healing of CFRP laminates exposed to hypervelocity small pellets simulating space debris. Communication présentée à 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials, Montréal, Québec. Tiré de https://www.proceedings.com/13016.htmlCommunication de conférence Aïssa, B., Therriault, D., Farahani, R.D. & Merle, P. (2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration. Communication présentée à MRS Fall Meeting 2011, Boston, MA, USA.Communication de conférence Moussaddy, H., Farahani, R.D., El Khakani, M.A., Lévesque, M. & Therriault, D. (2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies. Communication présentée à 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Tiré de https://app.knovel.com/hotlink/pdf/rcid:kpPASCTS03/id:kt010S8FN3/98-mechanical-properties-of-chemically-treated-carbon-nanotube-nanocomposite-microfibers-experimental-and-modeling-studiesCommunication de conférence Dalir, H., Farahani, R.D., Nhim, V., Samson, B., Levesque, M. & Therriault, D. (2011). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation. Communication présentée à MRS Fall Meeting, Boston, MA. (Publié dans MRS Proceedings, 1312, 151-159). Tiré de https://doi.org/10.1557/opl.2011.201Communication de conférence Kruzelecky, R.V., Aissa, B., Wong, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I.D., Hoa, S.V., Therriault, D., Ellery, A., Martel, S. & Jiang, X.X. (2011). Project Moondust: Characterization and mitigation of lunar dust. Communication présentée à 41st International Conference on Environmental Systems (ICES 2011), Portland, OR, United states. Tiré de https://doi.org/10.2514/6.2011-5184Communication de conférence Farahani, R.D., Moussaddy, H., El Khakani, M.A., Lévesque, M. & Therriault, D. (2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies. Communication présentée à 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.Communication de conférence Farahani, R.D., El Khakani, M.A., Lévesque, M. & Therriault, D. (2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies. Communication présentée à 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
- 2010
Communication de conférence Farahani, R.D., Dalir, H., Lévesque, M. & Therriault, D. (2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation orale]. Présenté à ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia.Communication de conférence Farahani, R., Dalir, H., Lévesque, M. & Therriault, D. (2010). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow. Communication présentée à ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada (p. 689-694). Tiré de https://doi.org/10.1115/IMECE2010-39086Communication de conférence Kruzelecky, R., Wong, B., Aissa, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I., Hoa, S., Therriault, D. & Ellery, A. (2010). MoonDust Lunar Dust Simulation and Mitigation. Communication présentée à 40th International Conference on Environmental Systems, Barcelona, Spain. Tiré de https://doi.org/10.2514/6.2010-6023Communication de conférence Dalir, H., Farahani, R.D., Lévesque, M. & Therriault, D. (2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions. Communication présentée à ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Tiré de https://doi.org/10.1115/IMECE2010-39103
- 2009
Communication de conférence Fauteux, C., Smirani, R., Pegna, J., El Khakani, M.A. & Therriault, D. (2009). Fast synthesis of ZnO nanostructures by laser-induced chemical liquid deposition. Communication présentée à European Material Research Society Spring Meeting 2008 - Symposium B: Laser and Plasma in Micro- and Nano-Scale Materials Processing and Diagnostics, Strasbourg, France. (Publié dans Applied Surface Science, 255(10), 5359-5362). Tiré de https://doi.org/10.1016/j.apsusc.2008.09.094Communication de conférence Laberge Lebel, L., Aissa, B., Khakani, M.A.E. & Therriault, D. (2009). Ultraviolet-assisted direct-write fabrication of three-dimensional microstructures. Communication présentée à MRS Spring Meeting, Boston, MA, USA.Communication de conférence Kuhn, M., Rao, R.B. & Therriault, D. (2009). Viscoelastic inks for direct-write microfabrication of single-chamber micro solid oxide fuel cells with coplanar thick electrodes. Communication présentée à Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography, San Francicso, CA, United states (p. 111-116). Tiré de https://doi.org/10.1557/PROC-1179-BB06-32
- 2008
Communication de conférence Hajj-Hassan, M., Gonzalez, T., Djeghelian, H., Ghafar-Zadeh, E., Therriault, D., Chodavarapu, V. & Andrews, M. (2008). Direct-write patterning of nanostructured sensory waveguides for integrated optical bioimaging applications. Communication présentée à Nanoscale Imaging, Sensing, and Actuation for Biomedical Applications V, San Jose, CA, United states (p. 686504.1-686504.8). Tiré de https://doi.org/10.1117/12.763965Communication de conférence Laberge-Label, L., Aissa, B., El Khnakani, M.A. & Therriault, D. (2008). Single-walled carbon nanotubes/polymer nanocomposites microbeams by Means of ultraviolet-assisted direct-write assembly. Communication présentée à 7th Joint Canada-Japan Workshop on Composites, Kanagawa, Japan (p. 40-47).Communication de conférence Aïssa, B., Laberge Lebel, L., Therriault, D. & El Khakani, M.A. (2008). Synthèse contrôlée des nanotubes de carbone monoparois par l'approche plasma/laser pour l'élaboration de nanocomposites NTC-Polymère. Communication présentée à 76e Congrès de l'ACFAS, Québec, QC, Canada.
- 2007
Communication de conférence Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S. & Therriault, D. (2007). Direct-write microfabrication and testing of solid oxide micro fuel cells. Communication présentée à 13th Canadian Semiconductor Technology Conference, Montréal, Québec.Communication de conférence Laberge Lebel, L., Aissa, B., ElKhakani, M.A. & Therriault, D. (2007). 3D reinforced SWCNT-polymer nanocomposite beams by means of microfluidic infiltration. Communication présentée à MRS Fall Meeting, Boston, Ma.Communication de conférence Kuhn, M., Napportn, T., Meunier, M., Vengallatore, S. & Therriault, D. (2007). Fabrication and characterization of single-chamber micro-solid oxide fuel cells with interdigitated electrodes. Communication présentée à Hydrogen and Fuel Cells 2007 : International Conference and Trade Show, Vancouver, BC.Communication de conférence Kuhn, M., Napportn, T., Meunier, M., Therriault, D. & Vengallatore, S. (2007). Single-chamber solid-oxide micro fuel cells with geometrically-complex electrodes. Communication présentée à MRS Fall Meeting, Boston, Ma.Communication de conférence Laberge Lebel, L., Aissa, B., El Khakani, M.A. & Therriault, D. (2007). Three-dimensional (3D) microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing. Communication présentée à Polymer nanocomposites 2007, Montréal, Québec.Communication de conférence Laberge Lebel, L., Aissa, B., El Khakani, M.A. & Therriault, D. (2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach. Communication présentée à Crepec 2007, Montréal, Québec. Tiré de https://doi.org/10.1557/PROC-1056-HH09-10Communication de conférence Laberge Lebel, L., Aissa, B., ElKhakani, M.A. & Therriault, D. (2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing. Communication présentée à Simha Symposium on Polymer Physics and Polymer Nanocomposites, Montréal, Québec.
- 2006
Communication de conférence Zadeh, E.G., Sawan, M., Jalali, M. & Therriault, D. (2006). CMOS-Based capacitive sensor array dedicated to microfluidic studies. Communication présentée à International Workshop on Computer Architecture for Machine Perception and Sensing (CAMP 2006), Montréal, Québec (p. 42-43). Tiré de https://doi.org/10.1109/CAMP.2007.4350348Communication de conférence Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2006). Direct-write CMOS-based Laboratory-On-Chip. Communication présentée à NSTI Nanotechnology Conference and Trade Show (NSTI Nanotech 2006), Boston, USA.Communication de conférence Kuhn, M., Napportn, T., Meunier, M., Therriault, D. & Vengallatore, S. (2006). Direct-Write Microfabrication of Single-Chamber Solid Oxide Fuel Cells with Interdigitated Electrodes. Communication présentée à MRS Fall Meeting, Boston, Ma. Tiré de https://doi.org/10.1557/PROC-0972-AA07-09-BB08-09Communication de conférence Palm, S., Bey-Oueslati, R., Martel, S. & Therriault, D. (2006). Fabrication de microcaloducs à section triangulaire par écriture directe. Communication présentée à 3rd Microfluidics French Conference (Microfluidics 2006), Toulouse, France.Communication de conférence Bey-Oueslati, R., Palm, S., Therriault, D. & Martel, S. (2006). High-speed direct-write for rapid fabrication of three-dimensional microfluidic devices. Communication présentée à 3rd Microfluidics French Conference, Toulouse, France.Communication de conférence Ghafar-Zadeh, E., Sawan, M. & Therriault, D. (2006). Microelectrofluidic packaging for CMOS based laboratory-on-chips. Communication présentée à International Electronics Packaging Symposium, Nyskayuna, N.Y.Communication de conférence Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S. & Therriault, D. (2006). Microfabrication de piles SOFC à chambre unique par écriture directe. Communication présentée à 74e Congrès de l'ACFAS, Montréal, Québec.Communication de conférence Bey-Oueslati, R., Therriault, D. & Martel, S. (2006). Micro heat pipe fabrication : high performance deposition platform for electronic industry. Communication présentée à 5th International Workshop on Microfactories, Besançon, France.
- 2005
Communication de conférence Ghafer-Zadeh, E., Sawan, M. & Therriault, D. (2005). Direct-write fabrication of microchannel dedicated to CMOS-based lab-on-chip applications. Communication présentée à ASME International Mechanical Engineering Congress and Exposition (IMECE 2005), Orlando, FL. Tiré de https://doi.org/10.1115/IMECE2005-82905
- 2004
Communication de conférence Therriault, D., Shepherd, R., Lewis, J. & White, S. (2004). Fugitive inks for direct-write assembly of complex three-dimensional microvascular networks. Communication présentée à Symposium on materials issues in solid freeforming (2004 MRS Fall meeting), Boston. Tiré de https://www.mrs.org/docs/default-source/meetings-events/fall-meetings/fall-2004-abstract-pdfs/abstracts-symposium-ll-materials-issues-in-solid-freeforming.pdf?status=Temp%26sfvrsn=0.3594815669567777
- 2022
- Chapitres de livre (2)
- 2018
Chapitre de livre Farahani, R.D., Therriault, D., Dubé, M., Bodkhe, S. & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. Dans P.W.R. Beaumont & C.H. Zweben (édit.), Comprehensive Composite Materials II (Vol. 6, p. 380-407). Oxford: Elsevier. Tiré de https://doi.org/10.1016/B978-0-12-803581-8.10019-0
- 2011
Chapitre de livre Laberge Lebel, L. & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. Dans B. Reddy (édit.), Advances in Diverse Industrial Applications of Nanocomposites (p. 410-428). Riejka, Croatia: InTech Open. Tiré de https://doi.org/10.5772/15231
- 2018
- Brevets (9)
- 2021
Brevet Piccirelli, N., Therriault, D., Otero Navas, I., Diouf Leiws, A., Iervolino, F. & Abderrafai, Y. (2021). Composition for additive manufacturing (Brevet n° CA 3078975 - demande). Tiré de https://patents.google.com/patent/CA3078975
- 2020
Brevet Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A. & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method (Brevet n° CA 3084631 - demande). Tiré de https://patents.google.com/patent/CA3084631Brevet Piccirelli, N., Bazin, B., Therriault, D., Lafrance, T. & Trudeau Lalonde, F. (2020). Extruder head for additive manufacturing, system and process for additive manufacturing (Brevet n° CA 3041017). Tiré de https://patents.google.com/patent/CA3041017
- 2019
Brevet Xu, C., Therriault, D., Laberge Lebel, L., L'Esperance, G. & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments (Brevet n° US 20190054536 - demande). Tiré de https://patents.google.com/patent/US20190054536Brevet Bodkhe, S., Therriault, D., Gosselin, F. & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof (Brevet n° US 20190284423 - demande). Tiré de https://patents.google.com/patent/US20190284423
- 2018
Brevet Therriault, D. & Chizari, K. (2018). Electrically conductive ink for solvent-cast 3D printing (Brevet n° US 20180022023 - demande). Tiré de https://patents.google.com/patent/US20180022023
- 2017
Brevet Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G. & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials (Brevet n° CA 2976782 - demande). Tiré de https://patents.google.com/patent/CA2976782
- 2012
Brevet Therriault, D., Lewis, J.A. & White, S.R. (2012). Microcapillary networks (Brevet n° US 8101139). Tiré de https://patents.google.com/patent/US8101139
- 2009
Brevet Laberge Lebel, L., Therriault, D., El-Khakani, M.A. & Aissa, B. (2009). Methods for preparing freeform three-dimensional structures (Brevet n° US 20090101278 - demande). Tiré de https://patents.google.com/patent/US20090101278
- 2021
- Rapports (28)
- 2022
Rapport Farahani, R.D., Lévesque, M. & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications.
- 2021
Rapport Farahani, R.D., Lévesque, M. & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications.Rapport Farahani, R.D. & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications.Rapport Pierre, J., Verville, M., Farahani, R.D. & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1.Rapport Abderrefai, Y., Farahani, R.D. & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers.Rapport Chauvette, J.-F., Hia, I.L., Farahani, R.D. & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries.Rapport Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M. & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites.Rapport Toloup, C., Trofimov, A., Lévesque, M. & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM).Rapport Trofimov, A., Lévesque, M. & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites.
- 2020
Rapport Farahani, R.D., Lévesque, M. & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications.Rapport Farahani, R.D., Lévesque, M. & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications.Rapport Farahani, R.D. & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications.Rapport Pierre, J., Farahani, R.D. & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1.Rapport Abderrefai, Y., Diouf Lewis, A., Farahani, R.D. & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers.Rapport Chauvette, J.-F., Hia, I.L., Brzeski, D., Farahani, R.D. & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries.Rapport Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M. & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites.Rapport Lebedev, O., Trofimov, A., Lévesque, M. & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM).
- 2019
Rapport Farahani, R.D. & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications.Rapport Farahani, R.D. & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications.Rapport Farahani, R.D. & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2.Rapport Pierre, J., Farahani, R.D. & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1.Rapport Abderrefai, Y., Diouf Lewis, A., Farahani, R.D. & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers.Rapport Farahani, R.D., Hia, I.L., Chauvette, J.-F., Gregorio, P., Brzeski, D. & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries.Rapport Lingua, A., Sosa Rey, F., Lévesque, M. & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites.Rapport Himmiche, S., Trofimov, A., Eren, Z., Farahani, R.D., Lévesque, M. & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM).
- 2010
Rapport Lévesque, M., Bui-Quoc, T. & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens.Rapport Lévesque, M., Bui-Quoc, T., Therriault, D. & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US.
- 2009
Rapport Lévesque, M., Therriault, D. & Nowlan, I. (2009). Wedge clamp verification testing.
- 2022