Répertoire des expertises

Ruiz, Edu

Répertoire des expertises

Ruiz, Edu

Répertoire des expertises

Publications par type

Article de revue (62) Communication de conférence (84) Livre Chapitre de livre (1) Brevet (1) Rapport Thèse Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Eduardo-Antonio-Julian Ruiz (148)

Articles de revue (62)
- 2024
  - Belzile, A., Armanasco, F., Chiacchiarelli, L. M., Lebrun, G., & Ruiz, E. (2024). Development of a novel flax soy-based polyurethane prepreg composite. Composites Part A: Applied Science and Manufacturing, 181, 108136 (12 pages).
  - Diby, I. C. P., Belkhiri, N., Nohair, B., Kazeruni, M., Ruiz, E., & Kaliaguine, S. (2024). HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus. Polymer Composites, 28986 (16 pages).
  - Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled carbon black/high-density polyethylene composite from waste tires: manufacturing, testing, and aging characterization. Recycling, 9(6), 107 (19 pages).
  - Billotte, C., Romana, L., Flory, A., Kaliaguine, S., & Ruiz, E. (2024). Recycled from waste tires carbon black/high-density polyethylene composite: Multi-scale mechanical properties and polymer aging. Polymer Composites, 28585 (14 pages).
- 2022
  - Bernaoui, A., Lebrun, G., & Ruiz, E. (2022). High performance natural fiber composites from mat and UD flax reinforcements backed with a mat Binder: A study of mat fiber surface fibrillation. Composites Part A: Applied Science and Manufacturing, 160, 107064 (14 pages).
- 2019
  - Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74.
- 2018
  - Habibi, M., Ruiz, E., Lebrun, G., & Laperrière, L. (2018). Effect of surface density and fiber length on the porosity and permeability of nonwoven flax reinforcement. Textile Research Journal, 88(15), 1776-1787.
  - Scola, A., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268.
  - Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S., & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society, 102(5), 2337-2352.
  - Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216.
  - Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171.
- 2017
  - LeBel, F., Ruiz, E., & Trochu, F. (2017). Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing. Journal of Reinforced Plastics and Composites, 36(23), 1693-1711.
  - Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157.
  - Billotte, C., Fotsing, E.-R., & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017, 1-9.
  - Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304.
  - Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement), 122-130.
  - LeBel, F., Ruiz, E., & Trochu, F. (2017). Void content analysis and processing issues to minimize defects in liquid composite molding. Polymer Composites, 40(1), 109-120.
- 2016
  - Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming, 9(2), 229-239.
  - Renaud, J., Vernet, N., Ruiz, E., & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96.
  - Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239.
- 2015
  - Favre, A., Fotsing, E.-R., Lévesque, M., & Ruiz, E. (2015). Comparative study of fiber-reinforced elastomer composites subjected to accelerated aging in water. Jounal of Elastomers and Plastics, 47(8), 719-737.
  - Gascon, L., Garcia, J. A., LeBel, F., Ruiz, E., & Trochu, F. (2015). Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding. Composites Part A: Applied Science and Manufacturing, 77, 275-284.
- 2014
  - Fotsing, E. R., Ross, A., & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39.
  - Ravey, C., Ruiz, E., & Trochu, F. (2014). Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography. Composites Science and Technology, 99, 96-102.
  - Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825.
  - Vernet, N., Ruiz, E., Advani, S., Alms, J. B., Aubert, M., Barburski, M., Barari, B., Beraud, J. M., Berg, D. C., Correia, N., Danzi, M., Delavière, T., Dickert, M., Di Fratta, C., Endruweit, A., Ermanni, P., Francucci, G., Garcia, J. A., George, A., ... Ziegmann, G. (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing, 61, 172-184.
  - LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2014). Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements. International Journal of Material Forming, 7(1), 93-116.
- 2013
  - Billotte, C., Bernard, F. M., & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. European Polymer Journal, 49(11), 3548-3560.
  - LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659.
  - Gutiérrez, J., Ruiz, E., & Trochu, F. (2013). Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction. Journal of the Textile Institute, 104(9), 980-993.
  - Gutierrez, J., Ruiz, E., & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27.
  - Causse, P., Ruiz, E., & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362.
  - Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511.
- 2012
  - Fotsing, E. R., Miron, F., Eury, Y., Ross, A., & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093.
  - Francucci, G., Vazquez, A., Ruiz, E., & Rodriguez, E. S. (2012). Capillary effects in vacuum-assisted resin transfer molding with natural fibers. Polymer Composites, 33(9), 1593-1602.
  - LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2012). Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open Journal of Inorganic Non-Metallic Materials, 2(3), 25-45.
  - Palardy, G., Hubert, P., Ruiz, E., Haider, M., & Lessard, L. (2012). Numerical Simulations for Class A Surface Finish in Resin Transfer Moulding Process. Composites Part B: Engineering, 43(2), 819-824.
  - Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913.
- 2011
  - Bensadoun, F., Kchit, N., Billotte, C., Trochu, F., & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, 406087.
  - Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F., & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011, 1-10.
  - Causse, P., Ruiz, E., & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895.
- 2010
  - García, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (2010). An efficient solver of the saturation equation in liquid composite molding processes. International Journal of Material Forming, 3(2), 1295-1302.
  - Achim, V., & Ruiz, E. (2010). Guiding selection for reduced process development time in RTM. International Journal of Material Forming, 3(2), 1277-1286.
- 2009
  - Ruiz, E., & Billotte, C. (2009). Predicting the cure of thermosetting polymers : the iso-conversion map. Polymer Composites, 30(10), 1450-1457.
- 2008
  - Leclerc, J. S., & Ruiz, E. (2008). Porosity reduction using optimized flow velocity in resin transfer molding. Composites Part A: Applied Science and Manufacturing, 39(12), 1859-68.
- 2007
  - Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144.
  - Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112.
  - Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811.
  - Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827.
- 2006
  - Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (2006). Advanced numerical simulation of liquid composite molding for process analysis and optimization. Composites Part A: Applied Science and Manufacturing, 37(6 SPEC ISS), 890-902.
  - Ruiz, E., & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924.
  - Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (2006). Optimization of Injection Flow Rate to Minimize Micro/Macro-Voids Formation in Resin Transfer Molded Composites. Composites Science and Technology, 66(3-4), 475-486.
- 2005
  - Soukane, S., Ruiz, E., & Trochu, F. (2005). A novel approach to reduce calculation time during simulations of resin transfer molding. Revue Européenne des Éléments Finis, 14(6-7), 819-840.
  - Ruiz, E., & Trochu, F. (2005). Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses. Polymer Composites, 26(2), 209-230.
  - Ruiz, E., & Trochu, F. (2005). Numerical Analysis of Cure Temperature and Internal Stresses in Thin and Thick Rtm Parts. Composites Part A: Applied Science and Manufacturing, 36(6), 806-826.
  - Ruiz, E., Demaria, C. F., & Trochu, F. (2005). PolyPer, a freeware package for preform permeability characterization. JEC Composites (17), 70-72.
  - Ruiz, E., & Trochu, F. (2005). Thermomechanical Properties During Cure of Glass-Polyester Rtm Composites: Elastic and Viscoelastic Modeling. Journal of Composite Materials, 39(10), 881-916.
- 2004
  - Ruiz, E., Trochu, F., & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57.
  - Ruiz, E., Achim, V., Soukane, S., & Trochu, F. (2004). Numerical simulation of liquid composite molding. JEC Composites (8), 147-149.
  - Bechet, E., Ruiz, E., Trochu, F., & Cuilliere, J. C. (2004). Re-Meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding. Journal of Reinforced Plastics and Composites, 23(1), 17-36.
- 2003
  - Bechet, E., Ruiz, E., Trochu, F., & Cuilliere, J. C. (2003). Adaptive Mesh Generation for Mould Filling Problems in Resin Transfer Moulding. Composites Part A: Applied Science and Manufacturing, 34(9), 813-834.
  - Ruiz, E., & Trochu, F. (2003). State of the art revue of numerical simulation of liquid composite molding processes. Recent Research Developments in Materials Science & Engineering (2), 217-244.
Communications de conférence (84)
- 2023
  - Nohair, B., Belkhiri, N., Diby, I. C. P., Kazeruni, M., Bussieres, J., Ruiz, E., & Kaliaguine, S. (octobre 2023). Mechanical performance enhancement of thermoplastics by surface-modified pyrolytic carbon black additives from waste tires [Communication écrite]. 9th Annual Composites and Advanced Materials Expo (CAMX 2023), Atlanta, GA, USA (11 pages).
- 2018
  - Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states.
- 2017
  - Benavente, M., Marcin, L., Lévesque, M., & Ruiz, E. (juillet 2017). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics [Communication écrite]. Cancom 2017, Ottawa, Ontario.
  - Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (août 2017). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China.
  - Benavente, M., Marcin, L., Godon, T., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Présentation]. Dans 21st International Conference on Composite Materials, Xi.
  - Benavente, M., Godon, T., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (août 2017). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (9 pages).
- 2016
  - Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (juin 2016). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Communication écrite]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages).
  - Renaud, J., Ruiz, E., & Laberge Lebel, L. (mai 2016). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states.
  - Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (mai 2016). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Communication écrite]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France.
- 2015
  - Courteau-Godmaire, H., Fotsing, E. R., Causse, P., Lévesque, M., & Ruiz, E. (juillet 2015). Numerical modeling of resin shrinkage around insert in composite sandwich panels [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
  - Pupin, C., Ross, A., Ruiz, E., Billotte, C., Rietsch, J.-C., Bricourt, P., & Vernet, N. (juillet 2015). Porosity control by process parameters [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
- 2013
  - Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). A study of consolidation equilibrium in composites made by flexible injection [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Billotte, C., Fellah, C., & Ruiz, E. (juillet 2013). Chemical shrinkage and thermomechanical characterization of different resin systems and prepregs during cure by a novel in situ measurement method [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Ravey, C., Ruiz, E., & Trochu, F. (juillet 2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Charette, E., Fotsing, E. R., Billotte, C., Ruiz, E., & Grenier, D. (juillet 2013). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). Processing warpage of asymmetric composite panels manufactured by resin transfer molding [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (juillet 2013). Underwater accelerated aging of elastomeric composite materials [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (juillet 2013). Void minimization and optimization of injection velocity in RTM processing [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
- 2012
  - Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (juin 2012). Experimental analysis by thermography and conductive heat flux sensors of the curing stage of composite parts made by resin infusion (RI) [Communication écrite]. 15th European Conference on Composite Materials (ECCM-15), Venise, Italie (8 pages).
  - Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Experimental study of capillary flows, voids formation and void migration in LCM Manufacturing [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand.
  - Francucci, G., Vázquez, A., Rodríguez, E., & Ruiz, E. (juillet 2012). Influence of the type of fluid and injection conditions on the processing of natural fiver composites [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand.
  - Pineda, U., Montés, N., Sánchez, F., Bensadoun, F., & Ruiz, E. (juin 2012). In-situ calibration experimental method for infrared thermography applied to the heat transfer analysis for composite parts during manufacturing based on resin infusion technique [Communication écrite]. 11th Quantitative InfraRed Thermography (QIRT 2012), Naples, Italie (10 pages).
  - García, J. A., Gascon, L., Ruiz, E., Lebel, F., & Trochu, F. (juillet 2012). Simulation and experimental validation of the saturation in LCM processes [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand.
  - Ruiz, E. (juillet 2012). Technology transfer in Canada: closing the gap between science and volume production [Communication écrite]. 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand.
- 2011
  - Causse, P., Ruiz, E., & Trochu, F. (août 2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection [Communication écrite]. 18th International Conference on Composite Materials, Jeju Island, Korea.
  - Ruiz, E., Billotte, C., Morin, B. F., Cara, F., & Baurier, H. (août 2011). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method [Communication écrite]. 18th International Conference on Composite Materials (ICCM 2011), Jeju Island, Korea.
  - Bilotte, C., Morin, B. F., Cara, F., Baurier, H., & Ruiz, E. (septembre 2011). Chemical shrinkage and thermomechanical characterization of an expoxy resin during cure by a novel in situ measurement method [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.
  - Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F., & Ruiz, E. (septembre 2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.
  - Gutierrez, J., Trochu, F., & Ruiz, E. (septembre 2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.
  - Causse, P., Ruiz, E., & Trochu, F. (septembre 2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion [Communication écrite]. 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.
  - Fotsing, R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil.
- 2010
  - Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (avril 2010). Advanced process simulation of resin transfer molding and application to fan blades for an aircraft engine [Communication écrite]. Forum des Journées européennes des composites, Paris, France.
  - Gascon, L., Garcia, J. A., Chinesta, F., Ruiz, E., & Trochu, F. (juillet 2010). Analysis of the saturation in liquid composite molding processes using an essentially non-oscillatory (eno) technique [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland (5 pages).
  - Kchit, N., Bensadoun, F., Carrozani, T., Billotte, C., Ruiz, E., Sol, H., & Trochu, F. (juillet 2010). A study of nano-claycomposites made by liquid composite molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Francucci, G., Vazquez, A., Rodriguez, E., & Ruiz, E. (juillet 2010). Capillarity effect in vacuum assisted resin transfer molding with natural fibers [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Ruiz, E., Achim, V., & Lebel, F. (juillet 2010). Characterization, analysis and design of RTM process [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Characterization of capillary effects in dual-scale fibrous reinforcements [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (juillet 2010). Development of a capillary characterization setup for dual-scale analysis of fiber wetting [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.
  - Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Experimental analysis of flexible injection for curved composite parts [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Arbter, A., Beraud, J. M., Binetry, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S. V., Long, A., Michaud, V., Morren, G., ... Ziegmann, G. (juillet 2010). Experimental determination of the permeability of textiles : a benchmark exercises [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Bensadoun, F., Kchit, N., Ruiz, E., & Trochu, F. (juillet 2010). Fabrication and mechanical properties of nanocomposites fabricated by rein infusion with bioresin and natural fibers [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.
  - Demaria, C., Ruiz, E., Trochu, F., Dambrine, B., & Godon, T. (mai 2010). Fabrication by resin transfer molding of a turbine blade reinforced by three-dimensional woven fabrics : Process simulation and optimization [Communication écrite]. Society for the Advancement of Material and Process Engineering's Spring Conference and Exhibition, Seattle, Washington.
  - Kchit, N., Bensadoun, F., Billotte, C., Ruiz, E., & Trochu, F. (juillet 2010). Nano-clay composites made by liquid molding [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Trudeau, P., & Ruiz, E. (juillet 2010). Optimizing the fibre wetting in a novel polyurethane foam sandwich composite [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Ruiz, E., Demaria, C., Trochu, F., Dambrine, B., & Godon, T. (juillet 2010). Simulation of resin transfer molding processing of a composite fan blade for an aircraft engine [Communication écrite]. 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.
  - Causse, P., Ruiz, E., & Trochu, F. (juillet 2010). Thermoelastic spring-in of curved composite parts manufactured by flexible injection [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.
- 2009
  - Sola, M., Jetté, M.-A., Fotsing, R., Cimmino, M., Ross, A., & Ruiz, E. (juillet 2009). Analytical and experimental study of embedded damping elements in composite applications [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK.
  - Garcia, J. A., Gascón, L., Chinesta, F., Ruiz, E., & Trochu, F. (juin 2009). An approach to simulate the saturation in RTM/VARI process [Communication écrite]. 3rd Manufacturing Engineering Society International Conference, Alcoy, Spain.
  - Lebel, F., Ruiz, E., Dulong, S., & Trochu, F. (septembre 2009). Experimental investigation of dual-scale reinforcement imbibition [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware.
  - Ruiz, E., & Achim, V. (juillet 2009). RTM process analysis and on-line characterization [Communication écrite]. 17th International Conference on Composite Materials, Edinburgh, UK.
  - Trochu, F., Demaria, C., Ruiz, E., Dambrine, B., & Gordon, T. (septembre 2009). RTM process simulation and optimization of composite fan blades reinforced by 3D woven fabrics [Communication écrite]. Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware.
- 2008
  - Chatel, S., Ruiz, E., Trochu, F., & Bréard, J. (juillet 2008). A permeability measurement method dedicated to a composite process family [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Causse, P., Ruiz, E., & Trochu, F. (juillet 2008). Consolidation of curved composite parts manufactured by flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Ortega, I., & Ruiz, E. (juillet 2008). Dispersion and dielectric characterization of an epoxy resin reinforced with carbon nanofibers [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Ruiz, E., Briones, L., Allard, E., & Trochu, F. (juillet 2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part I : Experimental investigation [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Achim, V., & Ruiz, E. (juillet 2008). Guiding selection toward cost-effective composite manufacturing [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Demaria, C., Ruiz, E., & Trochu, F. (juillet 2008). In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Harismendy, I., Del Rio, M., Ruiz, E., & Garcia, J. A. (juillet 2008). Modelling VARTM of wind turbine blades under non-isothermal boundary conditions [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Daqoune, T., Ruiz, E., & Trochu, F. (juillet 2008). Study of the shape of the compaction chamber in flexible injection [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
  - Lebel, F., Trochu, F., & Ruiz, E. (juillet 2008). Thermosetting matrix composite characterization and cure control via a scale model mould [Communication écrite]. 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec.
- 2007
  - Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie.
  - Croteau-Labouly, B., Achim, V., Ruiz, E., & Trochu, F. (août 2007). Combined characterization of permeability and compaction in porous media during vacuum assisted resin infusion [Communication écrite]. 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada.
  - Leclerc, J.-S., Meunier, P., & Ruiz, E. (juin 2007). Impact of injection pressure on voids formation and on mechanical properties of RTM composites [Communication écrite]. 19th Canadian Materials Science Conference, Hamilton, Ontario.
  - Ruiz, E., Ortega, I., Abdellaoui, C., & Trudeau, P. (octobre 2007). Nanosilica-modified carbon/epoxy composites manufacturing and characterization [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec.
  - Ortega, I., Billotte, C., & Ruiz, E. (octobre 2007). Thermo-mechanical and rheological characterization of various epoxy-based nanocomposites for high performance composites [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec.
- 2006
  - Ruiz, E., Achim, V., Breard, J., Chatel, S., & Trochu, F. (juillet 2006). A fast numerical approach to reduce void formation in liquid composite molding [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France.
  - Ruiz, E., Chatel, S., & Trochu, F. (juillet 2006). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France.
  - Hubert, P., Haider, M., Lessard, L., Ruiz, E., & Trochu, F. (mars 2006). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM [Communication écrite]. 27th International SAMPE Europe Conference, Paris, France.
  - Ruiz, E., Waffo, F., Owens, J., Billotte, C., & Trochu, F. (juillet 2006). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization [Communication écrite]. 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France.
- 2005
  - Ruiz, E., Achim, V., Trochu, F., & Breard, J. (août 2005). Reduction of void formation in LCM a practical numerical approach [Communication écrite]. Canada composites International Conference, Vancouver, Canada.
  - Haider, M., Ruiz, E., Hubert, P., & Lessard, L. (août 2005). Resin cure shrinkage and LPA action characterization for class A RTM processing [Communication écrite]. Canada composites International Conference, Vancouver, Canada.
- 2004
  - Ruiz, E., & Trochu, F. (septembre 2004). Approximation of resin flow in liquid composite molding using a new non-conforming three-dimensional finite element [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan.
  - Ruiz, E., & Trochu, F. (juillet 2004). Multi-criteria thermal optimization by evolutionary algorithms of resin cure, processing stresses and cycle time in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA.
  - Trochu, F., Ruiz, E., Achim, V., & Soukane, S. (juillet 2004). New approaches to accelerate calculations and improve accuracy of numerical simulations in liquid composite molding [Communication écrite]. International Conference on Flow Processes in Composite Materials, Delaware, USA.
  - Ruiz, E., Achim, V., Soukane, S., Trochu, F., & Breard, J. (décembre 2004). Numerical optimization of injection flow rate in RTM to minimize micro/macro voids formation [Communication écrite]. Journées Scientifiques et Techniques "Mise en forme des matériaux composites", Le Havre, France.
  - Ruiz, E., Gauvin, R., & Trochu, F. (septembre 2004). Processing stresses and thermal optimization in resin transfer molding [Communication écrite]. 5th Canada-Japan Workshop on Composites, Yonezawa, Japan.
- 2003
  - Achim, V., Ruiz, E., Soukane, S., & Trochu, F. (novembre 2003). Optimization of flow rate in resin transfer molding (RTM) [Communication écrite]. 8th Japan International SAMPE Symposium and Exhibition, Tokyo, Japan.
  - Ruiz, E., Trochu, F., & Gauvin, R. (novembre 2003). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 5th International Symposium on Advanced Composites, Corfu, Greece.
- 2001
  - Béchet, E., Ruiz, E., & Trochu, F. (août 2001). Remeshing algorithms applied to resin transfer moulding simulations [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec.
  - Ruiz, E., & Trochu, F. (août 2001). Thermal optimization of thick composite parts manufactured by resin transfer molding [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec.
  - Ruiz, E., & Trochu, F. (décembre 2001). Thermal residual stress during the curing of composite parts manufactured by RTM [Communication écrite]. International Conference on Science and Technology of Composite Materials, Mar de Plata, Argentine.
- 2000
  - Trochu, F., Remade, J.-F., Bréard, J., Bénoit, Y., & Ruiz, E. (octobre 2000). Three dimensional resin transfer molding simulations : Control of the accuracy and industrial validation for complex ribbed parts [Communication écrite]. 3rd Joint Canada-Japan Workshop on Composites Design and Manufacturing, Kyoto, Japan.
Chapitres de livre (1)
- 2011
  - Ruiz, E., & Trochu, F. (2011). Flow modeling in compoiste reinforcements. Dans Boisse, P. (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (p. 588-615).
Brevets (1)
- 2005
  - Ruiz, E., & Trochu, F. (2005). Manufacture of composites by a flexible injection process using a double or multiple cavity mold. (Demande de brevet no WO2005000566).

Répertoire des expertises

Ruiz, Edu

Répertoire des expertises

Ruiz, Edu

Vous êtes ici

Publications par type

Eduardo-Antonio-Julian Ruiz (148)