Scola, A., Eberling-Fux, N., Turenne, S. & Ruiz, E. (2018). New liquid processing of oxide/oxide 3D wowen ceramic matrix composites. Journal of the American Ceramic Society, 102(6), 3256-3268. Tiré de https://doi.org/10.1111/jace.16235

Scola, A., Podgorski, M., Eberling-Fux, N., Turenne, S. & Ruiz, E. (2018). Novel device for in situ process characterization of oxide/oxide ceramic matrix composites fabricated by flexible injection. Journal of the American Ceramic Society. Tiré de https://doi.org/10.1111/jace.16125

Benavente, M., Marcin, L., Courtois, A., Levesque, M. & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216. Tiré de https://doi.org/10.1016/j.compositesa.2018.01.005

Ruiz, E., Pupin, C., Ross, A., Dubois, C. & Rietsch, J.C. (2018). Solving porosity growth during composite manufacturing. Communication présentée à 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Tiré de https://www.nasampe.org/store/viewproduct.aspx?id=12982230

Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N. & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Tiré de https://doi.org/10.1016/j.compositesa.2016.12.006

Benavente, M., Marcin, L., Lévesque, M. & Ruiz, E. (2017). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics. Communication présentée à Cancom 2017, Ottawa, Ontario.

Courtois, A., Marcin, L., Benavente, M., Ruiz, E. & Levesque, M. (2017). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite. Communication présentée à 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Tiré de http://www.iccm-central.org/Proceedings/ICCM21proceedings/papers/2931.pdf

Benavente, M., Marcin, L., Godon, T., Lévesque, M. & Ruiz, E. (2017). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Présentation orale]. Présenté à 21st International Conference on Composite Materials, Xi'an, China. Tiré de https://www.iccm-central.org/Proceedings/ICCM21proceedings/papers/2891.pdf

Benavente, M., Godon, T., Marcin, L., Courtois, A., Levesque, M. & Ruiz, E. (2017). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics. Communication présentée à 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Tiré de http://www.iccm-central.org/Proceedings/ICCM21proceedings/papers/2891.pdf

Billotte, C., Fotsing, E.R. & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017, 9 pages. Tiré de https://doi.org/10.1155/2017/2748070

Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C. & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Tiré de https://doi.org/10.1016/j.compositesa.2017.05.023

Benavente, M., Marcin, L., Courtois, A., Levesque, M. & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement C), 122-130. Tiré de https://doi.org/10.1016/j.compositesa.2017.09.017

Renaud, J., Vernet, N., Ruiz, E. & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96. Tiré de https://doi.org/10.1016/j.compositesa.2016.04.017

Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C. & Levesque, M. (2016). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior. Communication présentée à 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages). Tiré de https://doi.org/10.1063/1.4949643

Fotsing, E.R., Leclerc, C., Sola, M., Ross, A. & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. Tiré de https://doi.org/10.1016/j.compositesb.2015.10.037

Renaud, J., Ruiz, E. & Laberge Lebel, L. (2016). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process. Communication présentée à SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states. Tiré de https://www.nasampe.org/store/viewproduct.aspx?id=6789855

Courteau-Godmaire, H., Fotsing, E.R., Causse, P., Levesque, M. & Ruiz, E. (2015). Numerical modeling of resin shrinkage around insert in composite sandwich panels. Communication présentée à 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Tiré de http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-5203-4.pdf

Gascon, L., Garcia, J.A., LeBel, F., Ruiz, E. & Trochu, F. (2015). Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding. Composites Part A: Applied Science and Manufacturing, 77, 275-284. Tiré de https://doi.org/10.1016/j.compositesa.2015.05.019

Ravey, C., Ruiz, E. & Trochu, F. (2014). Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography. Composites Science and Technology, 99, 96-102. Tiré de https://doi.org/10.1016/j.compscitech.2014.05.019

Fotsing, E.R., Sola, M., Ross, A. & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. Tiré de https://doi.org/10.1177/0021998313514254

Vernet, N., Ruiz, E., Advani, S., Alms, J.B., Aubert, M., Barburski, M., Barari, B., Beraud, J.M., Berg, D.C., Correia, N., Danzi, M., Delaviere, T., Dickert, M., Di Fratta, C., Endruweit, A., Ermanni, P., Francucci, G., Garcia, J.A., George, A., Hahn, C., Klunker, F., Lomov, S.V., Long, A., Louis, B., Maldonado, J., Meier, R., Michaud, V., Perrin, H., Pillai, K., Rodriguez, E., Trochu, F., Verheyden, S., Weitgrefe, M., Xiong, W., Zaremba, S. & Ziegmann, G. (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing, 61, 172-184. Tiré de https://doi.org/10.1016/j.compositesa.2014.02.010

Billotte, C., Bernard, F.M. & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. European Polymer Journal, 49(11), 3548-3560. Tiré de https://doi.org/10.1016/j.eurpolymj.2013.07.013

Billotte, C., Fellah, C. & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of different resin systems and prepregs during cure by a novel in situ measurement method. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 600-608). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/BIL81600.pdf

Ravey, C., Ruiz, E. & Trochu, F. (2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 4174-4183). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/RAV80699.pdf

Charette, E., Fotsing, E.R., Billotte, C., Ruiz, E. & Grenier, D. (2013). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 400-411). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FOT81642.pdf

LeBel, F., Fanaei, A.E., Ruiz, E. & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659. Tiré de https://doi.org/10.1177/0040517512471742

Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B. & Godon, T. (2013). Formation of porosities in RTM by VOCS and water vapour. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 8447-8457). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/PUP81079.pdf

Gutierrez, J., Ruiz, E. & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27. Tiré de https://doi.org/10.1080/09243046.2013.764778

Causse, P., Ruiz, E. & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362. Tiré de https://doi.org/10.1007/s12289-012-1090-y

Fotsing, E.R., Sola, M., Ross, A. & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. Tiré de https://doi.org/10.1177/0021998312449027

Fotsing, E.R., Sola, M., Ruiz, E. & Ross, A. (2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 1284-1295). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FOT81384.pdf

Causse, P., Ruiz, E. & Trochu, F. (2013). Processing warpage of asymmetric composite panels manufactured by resin transfer molding. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (p. 440-447). Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/CAU81633.pdf

Favre, A., Fotsing, E.R., Ruiz, E. & Lévesque, M. (2013). Underwater accelerated aging of elastomeric composite materials. Communication présentée à 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Tiré de http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FAV81072.pdf

Francucci, G., Vazquez, A., Ruiz, E. & Rodriguez, E.S. (2012). Capillary effects in vacuum-assisted resin transfer molding with natural fibers. Polymer Composites, 33(9), 1593-1602. Tiré de https://doi.org/10.1002/pc.22290

Pineda, U., Montés, N., Sánchez, F., Bensadoun, F. & Ruiz, E. (2012). Experimental analysis by thermography and conductive heat flux sensors of the curing stage of composite parts made by resin infusion (RI). Communication présentée à 15th European Conference on Composite Materials (ECCM-15), Venise, Italie. Tiré de http://www.escm.eu.org/eccm15/data/assets/1984.pdf

Lebel, F., Fanaei, A., Ruiz, E. & Trochu, F. (2012). Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open Journal of Inorganic Non-Metallic Materials, 2(3), 25-45. Tiré de https://doi.org/10.4236/ojinm.2012.23004

Ruiz, E., Lebel, F. & Trochu, F. (2012). Experimental study of capillary flows, voids formation and void migration in LCM Manufacturing. Communication présentée à 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/FPCM11/FPCM_11_Proceedings.pdf

Francucci, G., Vázquez, A., Rodríguez, E. & Ruiz, E. (2012). Influence of the type of fluid and injection conditions on the processing of natural fiver composites. Communication présentée à 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/FPCM11/FPCM_11_Proceedings.pdf

Pineda, U., Montés, N., Sánchez, F., Bensadoun, F. & Ruiz, E. (2012). In-situ calibration experimental method for infrared thermography applied to the heat transfer analysis for composite parts during manufacturing based on resin infusion technique. Communication présentée à 11th Quantitative InfraRed Thermography (QIRT 2012), Naples, Italie. Tiré de https://doi.org/10.21611/qirt.2012.213

Palardy, G., Hubert, P., Ruiz, E., Haider, M. & Lessard, L. (2012). Numerical Simulations for Class A Surface Finish in Resin Transfer Moulding Process. Composites Part B: Engineering, 43(2), 819-824. Tiré de https://doi.org/10.1016/j.compositesb.2011.06.002

García, J.A., Gascon, L., Ruiz, E., Lebel, F. & Trochu, F. (2012). Simulation and experimental validation of the saturation in LCM processes. Communication présentée à 11th International Conference on Flow Processes in Composite Materials (FPCM 2011), Auckland, New Zealand. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/FPCM11/FPCM_11_Proceedings.pdf

Causse, P., Ruiz, E. & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. Tiré de https://doi.org/10.1016/j.compositesa.2012.06.010

Causse, P., Ruiz, E. & Trochu, F. (2011). Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection. Communication présentée à 18th International Conference on Composite Materials, Jeju Island, Korea. Tiré de https://www.iccm-central.org/Proceedings/ICCM18proceedings/papers/F02-6-IF1743.pdf

Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F. & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011. Tiré de https://doi.org/10.1155/2011/964193

Ruiz, E., Billotte, C., Morin, B.F., Cara, F. & Baurier, H. (2011). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. Communication présentée à 18th International Conference on Composite Materials (ICCM 2011), Jeju Island, Korea. Tiré de http://www.iccm-central.org/Proceedings/ICCM18proceedings/papers/W18-3-IF1413.pdf

Bilotte, C., Morin, B.F., Cara, F., Baurier, H. & Ruiz, E. (2011). Chemical shrinkage and thermomechanical characterization of an expoxy resin during cure by a novel in situ measurement method. Communication présentée à 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.

Bensadoun, F., Billotte, C., Kchit, N., Bickerton, S., Trochu, F. & Ruiz, E. (2011). Development, characterization and manufacturing of nanocomposites and bionanocomposites for transportation industry. Communication présentée à 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.

Gutierrez, J., Trochu, F. & Ruiz, E. (2011). Effects of high frequency vibrations on the compressibility of dry fibrous reinforcements. Communication présentée à 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.

Causse, P., Ruiz, E. & Trochu, F. (2011). Experimental study of flexible injection to manufacture parts of strong curvature. Polymer Composites, 32(6), 892-895. Tiré de https://doi.org/10.1002/pc.21096

Causse, P., Ruiz, E. & Trochu, F. (2011). Fabrication of curved parts by flexible injection : influence of processing conditions on composite quality and analysis of distortion. Communication présentée à 2nd Joint US-Canada Conference on Composites and 26th ASC Annual Technical Conference, Montréal, Québec.

Ruiz, E. & Trochu, F. (2011). Flow modeling in compoiste reinforcements. Dans P. Boisse (édit.), Research and Markets: Composite Reinforcements for Optimum Performance (p. 588-615). Tiré de https://doi.org/10.1533/9780857093714.4.588

Gascon, L., Garcia, J.A., Chinesta, F., Ruiz, E. & Trochu, F. (2010). Analysis of the saturation in liquid composite molding process using an essentially non-oscillartory technique. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_63.pdf

García, J.A., Gascón, L., Chinesta, F., Ruiz, E. & Trochu, F. (2010). An efficient solver of the saturation equation in liquid composite molding processes. International Journal of Material Forming, 3(2), 1295-1302. Tiré de https://doi.org/10.1007/s12289-010-0681-8

Kchit, N., Bensadoun, F., Carrozani, T., Billotte, C., Ruiz, E., Sol, H. & Trochu, F. (2010). A study of nano-claycomposites made by liquid composite molding. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_91.pdf

Francucci, G., Vazquez, A., Rodriguez, E. & Ruiz, E. (2010). Capillarity effect in vacuum assisted resin transfer molding with natural fibers. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_77.pdf

Ruiz, E., Achim, V. & Lebel, F. (2010). Characterization, analysis and design of RTM process. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_89.pdf

Lebel, F., Ruiz, E., Dulong, S. & Trochu, F. (2010). Characterization of capillary effects in dual-scale fibrous reinforcements. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.

Lebel, F., Ruiz, E., Dulong, S. & Trochu, F. (2010). Development of a capillary characterization setup for dual-scale analysis of fiber wetting. Communication présentée à 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.

Causse, P., Ruiz, E. & Trochu, F. (2010). Experimental analysis of flexible injection for curved composite parts. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_90.pdf

Arbter, A., Beraud, J.M., Binetry, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S.V., Long, A., Michaud, V., Morren, G., Ruiz, E., Sol, H., Trochu, F., Verleye, B., Wietgrefe, M., Wui, W. & Ziegmann, G. (2010). Experimental determination of the permeability of textiles : a benchmark exercises. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_87.pdf

Bensadoun, F., Kchit, N., Ruiz, E. & Trochu, F. (2010). Fabrication and mechanical properties of nanocomposites fabricated by rein infusion with bioresin and natural fibers. Communication présentée à 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.

Demaria, C., Ruiz, E., Trochu, F., Dambrine, B. & Godon, T. (2010). Fabrication by resin transfer molding of a turbine blade reinforced by three-dimensional woven fabrics : Process simulation and optimization. Communication présentée à Society for the Advancement of Material and Process Engineering's Spring Conference and Exhibition, Seattle, Washington.

Achim, V. & Ruiz, E. (2010). Guiding selection for reduced process development time in RTM. International Journal of Material Forming, 3(2), 1277-1286. Tiré de https://doi.org/10.1007/s12289-009-0630-6

Kchit, N., Bensadoun, F., Billotte, C., Ruiz, E. & Trochu, F. (2010). Nano-clay composites made by liquid molding. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_91.pdf

Trudeau, P. & Ruiz, E. (2010). Optimizing the fibre wetting in a novel polyurethane foam sandwich composite. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_96.pdf

Trudeau, P., Ruiz, E. & Trochu, F. (2010). Polyurethane composite sandwich structure. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm10/fpcm10_submission_96.pdf

Ruiz, E., Demaria, C., Trochu, F., Dambrine, B. & Godon, T. (2010). Simulation of resin transfer molding processing of a composite fan blade for an aircraft engine. Communication présentée à 10th International Conference on Flow Processes in Composite Materials, Monte Verità, Ascona, Switzerland.

Garcia, J.A., Gascón, L., Chinesta, F., Ruiz, E. & Trochu, F. (2009). An approach to simulate the saturation in RTM/VARI process. Communication présentée à 3rd Manufacturing Engineering Society International Conference, Alcoy, Spain.

Lebel, F., Ruiz, E., Dulong, S. & Trochu, F. (2009). Experimental investigation of dual-scale reinforcement imbibition. Communication présentée à Joint American Society for Composites/Association for Composite Structure and Materials Conference, Newark, Delaware.

Ruiz, E. & Billotte, C. (2009). Predicting the cure of thermosetting polymers : the iso-conversion map. Polymer Composites, 30(10), 1450-1457. Tiré de https://doi.org/10.1002/pc.20710

Ruiz, E. & Achim, V. (2009). RTM process analysis and on-line characterization. Communication présentée à 17th International Conference on Composite Materials, Edinburgh, UK. Tiré de https://www.iccm-central.org/Proceedings/ICCM17proceedings/papers/C2.1%20Ruiz.pdf

Causse, P., Ruiz, E. & Trochu, F. (2008). Consolidation of curved composite parts manufactured by flexible injection. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/z_poster/25.pdf

Ortega, I. & Ruiz, E. (2008). Dispersion and dielectric characterization of an epoxy resin reinforced with carbon nanofibers. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/NC/3.pdf

Ruiz, E., Briones, L., Allard, E. & Trochu, F. (2008). Flexible injection : a novel LCM technology for low cost manufacturing of high performance composites. Part I : Experimental investigation. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/NP/1.pdf

Achim, V. & Ruiz, E. (2008). Guiding selection toward cost-effective composite manufacturing. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/IA1/1.pdf

Demaria, C., Ruiz, E. & Trochu, F. (2008). In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/z_poster/4.pdf

Harismendy, I., Del Rio, M., Ruiz, E. & Garcia, J.A. (2008). Modelling VARTM of wind turbine blades under non-isothermal boundary conditions. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/MC/4.pdf

Leclerc, J.S. & Ruiz, E. (2008). Porosity reduction using optimized flow velocity in resin transfer molding. Composites Part A: Applied Science and Manufacturing, 39(12), 1859-68. Tiré de https://doi.org/10.1016/j.compositesa.2008.09.008

Daqoune, T., Ruiz, E. & Trochu, F. (2008). Study of the shape of the compaction chamber in flexible injection. Communication présentée à 9th International Conference on Flow Processes in Composite Materials, Montréal, Québec. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm09/pdf/z_poster/24.pdf

Croteau-Labouly, B., Achim, V., Ruiz, E. & Trochu, F. (2007). Combined charaterization of permeability and compaction in porous media during vacuum assisted resin infusion. Communication présentée à 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada.

Ruiz, E. & Trochu, F. (2007). Coupled Non-Conforming Finite Element and Finite Difference Approximation Based on Laminate Extrapolation to Simulate Liquid Composite Molding Processes. Part II: Non-Isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Tiré de https://doi.org/10.1515/SECM.2007.14.2.113

Ruiz, E., Achim, V. & Trochu, F. (2007). Coupled Non-Conforming Finite Element and Finite Difference Approximation Based on Laminate Extrapolation to Simulate Liquid Composite Molding Processes. Part I: Isothermal Flow. Science and Engineering of Composite Materials, 14(2), 85-112. Tiré de https://doi.org/10.1515/SECM.2007.14.2.85

Leclerc, J.-S., Meunier, P. & Ruiz, E. (2007). Impact of injection pressure on voids formation and on mechanical properties of RTM composites. Communication présentée à 19th Canadian Materials Science Conference, Hamilton, Ontario.

Demaria, C., Ruiz, E. & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811. Tiré de https://doi.org/10.1002/pc.20107

Demaria, C., Ruiz, E. & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827. Tiré de https://doi.org/10.1002/pc.20108

Ruiz, E., Ortega, I., Abdellaoui, C. & Trudeau, P. (2007). Nanosilica-modified carbon/epoxy composites manufacturing and characterization. Communication présentée à 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec.

Ruiz, E., Achim, V., Breard, J., Chatel, S. & Trochu, F. (2006). A fast numerical approach to reduce void formation in liquid composite molding. Communication présentée à 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/FPCM/FPCM08/proceedings.pdf

Ruiz, E., Chatel, S. & Trochu, F. (2006). A Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium. Communication présentée à 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/FPCM/FPCM08/proceedings.pdf

Hubert, P., Haider, M., Lessard, L., Ruiz, E. & Trochu, F. (2006). Integrated Approach for Class A Surface Finish of Automotive Components Manufactured by RTM. Communication présentée à 27th International SAMPE Europe Conference, Paris, France.

Ruiz, E., Waffo, F., Owens, J., Billotte, C. & Trochu, F. (2006). Modeling of Resin Cure Kinetics for mOlding Cycle Optimization. Communication présentée à 8th International Conference on Flow Processes in Composite Materials, Mines de Douai, France. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/FPCM/FPCM08/proceedings.pdf

Ruiz, E. & Trochu, F. (2006). Multi-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time. Composites Part A: Applied Science and Manufacturing, 37(6), 913-924. Tiré de https://doi.org/10.1016/j.compositesa.2005.06.010

Ruiz, E. & Trochu, F. (2005). Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses. Polymer Composites, 26(2), 209-230. Tiré de https://doi.org/10.1002/pc.20077

Ruiz, E. & Trochu, F. (2005). Manufacture of composites by a flexible injection process using a double or multiple cavity mold (Brevet n° WO 2005000566 - demande). Tiré de https://patents.google.com/patent/WO2005000566

Ruiz, E. & Trochu, F. (2005). Numerical Analysis of Cure Temperature and Internal Stresses in Thin and Thick Rtm Parts. Composites Part A: Applied Science and Manufacturing, 36(6), 806-826. Tiré de https://doi.org/10.1016/j.compositesa.2004.10.021

Ruiz, E., Demaria, C.F. & Trochu, F. (2005). PolyPer, a freeware package for preform permeability characterisation. JEC Composites, (17), 70-72.

Ruiz, E., Achim, V., Trochu, F. & Breard, J. (2005). Reduction of void formation in LCM a practical numerical approach. Communication présentée à Canada composites International Conference, Vancouver, Canada.

Haider, M., Ruiz, E., Hubert, P. & Lessard, L. (2005). Resin cure shrinkage and LPA action characterization for class A RTM processing. Communication présentée à Canada composites International Conference, Vancouver, Canada.

Ruiz, E. (2004). De la caractérisation des matériaux et simulation du procédé à l'optimisation de la fabrication des composites par injection sur renfort (Thèse de doctorat, École Polytechnique de Montréal).

Ruiz, E., Trochu, F. & Gauvin, R. (2004). Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM. Advanced Composites Letters, 13(1), 49-57. Tiré de https://doi.org/10.1177/096369350401300105

Ruiz, E. & Trochu, F. (2004). Multi-criteria thermal optimization by evalutionary algorithms of resin cure, processing stresses and cycle time in liquid composite molding. Communication présentée à International Conference on Flow Processes in Composite Materials, Delaware, USA. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm07/Extended_abstracts/EA485.pdf

Trochu, F., Ruiz, E., Achim, V. & Soukane, S. (2004). New approaches to accelerate calculations and improve accuracy of numerical simulations in liquid composite molding. Communication présentée à International Conference on Flow Processes in Composite Materials, Delaware, USA. Tiré de https://ecm-academics.plymouth.ac.uk/jsummerscales/fpcm/fpcm07/Extended_abstracts/EA255.pdf

Ruiz, E., Achim, V., Soukane, S., Trochu, F. & Breard, J. (2004). Numerical optimization of injection flow rate in RTM to minimize micro/macro voids formation. Communication présentée à Journées Scientifiques et Techniques "Mise en forme des matériaux composites", Le Havre, France.

Ruiz, E., Achim, V., Soukane, S. & Trochu, F. (2004). Numerical simulation of liquid composite molding. JEC Composites, (8), 147-149.

Ruiz, E., Gauvin, R. & Trochu, F. (2004). Processing stresses and thermal optimization in resin transfer molding. Communication présentée à 5th Canada-Japan Workshop on Composites, Yonezawa, Japan.

Achim, V., Ruiz, E., Soukane, S. & Trochu, F. (2003). Optimization of flow rate in resin transfer molding (RTM). Communication présentée à 8th Japan International SAMPE Symposium and Exhibition, Tokyo, Japan.

Ruiz, E. & Trochu, F. (2003). State of the art revue of numerical simulation of liquid composite molding processes. Recent Research Developments in Materials Science & Engineering, (2), 217-244.

Ruiz, E. & Trochu, F. (2001). Thermal optimization of thick composite parts manufactured by resin transfer molding. Communication présentée à 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Tiré de https://doi.org/10.1201/9781003076155-22