Répertoire des expertises

Favis, Basil D.

Répertoire des expertises

Favis, Basil D.

Répertoire des expertises

Publications par type

Article de revue (167) Communication de conférence (70) Livre Chapitre de livre Brevet (6) Rapport Thèse Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Basil Favis (243)

Articles de revue (167)
- 2025
  - Lassus, A., Therriault, D., Favis, B. D., & Virgilio, N. (2025). Tailoring the morphology in partially and fully miscible mixtures of PEEK and PEI. Polymer, 128315.
- 2023
  - Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (2023). Material extrusion of quaternary co-continuous biopolymers: A strategy for realizing lightweight cellular solids with high impact toughness. Additive Manufacturing, 77, 103805 (15 pages).
- 2022
  - Hoemann, C. D., Rodríguez González, J. R., Guzmán-Morales, J., Chen, G., Jalali Dil, E., & Favis, B. D. (2022). Chitosan coatings with distinct innate immune bioactivities differentially stimulate angiogenesis, osteogenesis and chondrogenesis in poly-caprolactone scaffolds with controlled interconnecting pore size. Bioactive Materials, 10, 430-442.
  - Comtois, E., Dubois, C., & Favis, B. D. (2022). Linear burning rate of double base propellant containing Azidodeoxycellulose. Journal of Energetic Materials, 40(2), 136-152.
  - Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645.
  - Gancheva, T., Li, Y., Pilon, D., Gauthier, M., Akbarzadeh, A., & Favis, B. D. (2022). Post-extrusion process for the robust preparation of highly uniform multiphase polymeric 3D printing filaments. Polymer Engineering and Science, 62(1), 66-74.
  - Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297.
- 2021
  - Huang, Y., Gancheva, T., Favis, B. D., Abidli, A., Wang, J., & Park, C. B. (2021). Hydrophobic Porous Polypropylene with Hierarchical Structures for Ultrafast and Highly Selective Oil/Water Separation. ACS Applied Materials & Interfaces, 13(14), 16859-16868.
  - Liberelle, B., Jalali Dil, E., Sabri, F., Favis, B. D., De Crescenzo, G., & Virgilio, N. (2021). Immobilizing enzyme biocatalysts onto porous polymer monoliths prepared from cocontinuous polymer blends. ACS Applied Polymer Materials, 3(12), 6359-6365.
  - Comtois, E., Favis, B. D., & Dubois, C. (2021). Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine. Propellants, Explosives, Pyrotechnics, 46(3), 494-504.
  - Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173.
  - Sangroniz, L., Gancheva, T., Favis, B. D., Muller, A. J., & Santamaria, A. (2021). Rheology of complex biobased quaternary blends: Poly(lactic acid) poly(ethylene oxide) /poly(ether-b-amide)/poly(amide 11). Journal of Rheology, 65(3), 437-451.
  - Wang, J., Reyna-Valencia, A., & Favis, B. D. (2021). Surface Migration of Conductive PEBA in Ternary Polymer Blend Films with Different Wetting Morphologies. Macromolecules, 54(2), 5607-5617.
- 2020
  - Gazil, O., Gancheva, T., Bilodeau-Calame, M., Favis, B. D., & Virgilio, N. (2020). Controlling the distribution of nanoparticles in hydrogels via interfacial synthesis. Nanoscale Advances, 2(11), 5263-5270.
  - Jalali Dil, E., Arjmand, M., Otero Navas, I., Sundararaj, U., & Favis, B. D. (2020). Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity. Macromolecules, 52(22), 10267-10277.
  - Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(epsilon-caprolactone) ternary blends with partial wetting morphology. Polymer Crystallization, 3(6), e10145 (13 pages).
  - Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2020). Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(epsilon-caprolactone). Macromolecules, 53(5), 1726-1735.
  - Comtois, E., Favis, B. D., & Dubois, C. (2020). Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. Polymer Engineering and Science, 60(9), 2301-2313.
- 2019
  - Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2019). Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends. Thermochimica Acta, 677, 117-130.
- 2018
  - Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity. European Polymer Journal, 98(Supplement), 11-20.
  - Wang, J., Tsou, A. H., & Favis, B. D. (2018). Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends. Macromolecules, 51(22), 9165-9176.
  - Wang, J., Tsou, A. H., Passino, H. L., & Favis, B. D. (2018). PPE-g-HDPE in high-performance Poly(p-Phenylene Ether)/Polyethylene Blends: Synthesis and compatibilization effects. Polymer, 138, 92-102.
  - Zolali, A. M., & Favis, B. D. (2018). Toughening of cocontinuous polylactide/polyethylene blends via an interfacially percolated intermediate phase. Macromolecules, 51(10), 3572-3581.
  - Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587.
- 2017
  - Li, X., Ghavidel Mehr, N., Guzman-Morales, J., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (2017). Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. Journal of Biomedical Materials Research Part A, 105(8), 2171-2181.
  - Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2017). Choice of land reference situation in life cycle impact assessment. International Journal of Life Cycle Assessment, 22(8), 1220-1231.
  - Zolali, A. M., & Favis, B. D. (2017). Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface. Polymer, 114, 277-288.
  - Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene. European Polymer Journal, 91, 197-211.
  - Wang, J., Reyna-Valencia, A., & Favis, B. D. (2017). Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends. Polymer, 136, 224-234.
  - Heshmati, V., & Favis, B. D. (2017). High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility. Polymer, 123, 184-193.
  - Heshmati, V., Zolali, A. M., & Favis, B. D. (2017). Morphology development in poly (lactic acid)/polyamide11 biobased blends: chain mobility and interfacial interactions. Polymer, 120, 197-208.
  - Zolali, A. M., & Favis, B. D. (2017). Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. Soft Matter, 13(15), 2844-2856.
  - Jegat, C., Virgilio, N., & Favis, B. D. (2017). Self-assembly of oil microdroplets at the interface in co-continuous polymer blends. European Polymer Journal, 93, 259-271.
  - Zolali, A. M., Heshmati, V., & Favis, B. D. (2017). Ultratough co-continuous PLA/PA11 by interfacially percolated poly(ether-b-amide). Macromolecules, 50(1), 264-274.
- 2016
  - Wang, J., Reyna-Valencia, A., & Favis, B. D. (2016). Assembling Conductive PEBA Copolymer at the Continuous Interface in Ternary Polymer Systems: Morphology and Resistivity. Macromolecules, 49(14), 5115-5125.
  - Jalali Dil, E., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. D. (2016). Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends. European Polymer Journal, 85, 187-197.
  - Wang, J., Reyna-Valencia, A., Chaigneau, R., & Favis, B. D. (2016). Controlling the Hierarchical Structuring of Conductive PEBA in Ternary and Quaternary Blends. Industrial & Engineering Chemistry Research, 55(50), 12848-12859.
  - Zolali, A. M., & Favis, B. D. (2016). Partial and complete wetting in ultra-low interfacial tension multiphase blends with polylactide. Journal of Physical Chemistry B, 120(49), 12708-12719.
  - Jalali Dil, E., Virgilio, N., & Favis, B. D. (2016). The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on the morphology, rheology and mechanical properties. European Polymer Journal, 85, 635-646.
- 2015
  - Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (2015). Aggregated indicator to assess land use impacts in life cycle assessment (LCA) based on the economic value of ecosystem services. Journal of Cleaner Production, 94, 56-66.
  - Ghavidel Mehr, N., Hoemann, C. D., & Favis, B. D. (2015). Chitosan surface modification of fully interconnected 3D porous poly(-caprolactone) by the LbL approach. Polymer (United Kingdom), 64, 112-121.
  - Jalali Dil, E., & Favis, B. D. (2015). Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system. Polymer, 77, 156-166.
  - Jalali Dil, E., & Favis, B. D. (2015). Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 76, 295-306.
  - Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212.
  - Mehr, N. G., Li, X., Chen, G., Favis, B. D., & Hoemann, C. D. (2015). Pore size and LbL chitosan coating influence mesenchymal stem cell in vitro fibrosis and biomineralization in 3D porous poly(epsilon-caprolactone) scaffolds. Journal of Biomedical Materials Research - Part A, 103(7), 2449-2459.
  - Rizvi, A., Park, C. B., & Favis, B. D. (2015). Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils. Polymer (United Kingdom), 68, 83-91.
- 2014
  - Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M. D., & Favis, B. D. (2014). Enhancement in interfacial reactive compatibilization by chain mobility. Polymer (United Kingdom), 55(16), 3905-3914.
  - Wang, J., Lessard, B. H., Maric, M., & Favis, B. D. (2014). Hierarchically porous polymeric materials from ternary polymer blends. Polymer (United Kingdom), 55(16), 3461-3467.
  - Ravati, S., Beaulieu, C., Zolali, A. M., & Favis, B. D. (2014). High performance materials based on a self-assembled multiple-percolated ternary blend. AICHE Journal, 60(8), 3005-3012.
  - Ravati, S., Poulin, S., Piyakis, K., & Favis, B. D. (2014). Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS. Polymer, 55(23), 6110-6123.
  - Ghavidel Mehr, N., Li, X., Ariganello, M. B., Hoemann, C. D., & Favis, B. D. (2014). Poly(-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior. Journal of Materials Science: Materials in Medicine, 25(9), 2083-2093.
  - Taguet, A., Bureau, M. N., Huneault, M. A., & Favis, B. D. (2014). Toughening mechanisms in interfacially modified HDPE/thermoplastic starch blends. Carbohydrate Polymers, 114, 222-229.
- 2013
  - Taghizadeh, A., & Favis, B. D. (2013). Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. Carbohydrate Polymers, 98(1), 189-98.
  - Taghizadeh, A., & Favis, B. D. (2013). Effect of high molecular weight plasticizers on the gelatinization of starch under static and shear conditions. Carbohydrate Polymers, 92(2), 1799-1808.
  - Taghizadeh, A., Sarazin, P., & Favis, B. D. (2013). High molecular weight plasticizers in thermoplastic starch/polyethylene blends. Journal of Materials Science, 48(4), 1799-1811.
  - Cercle, C., Sarazin, P., & Favis, B. D. (2013). High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. Carbohydrate Polymers, 92(1), 138-148.
  - Ravati, S., & Favis, B. D. (2013). Interfacial Coarsening of Ternary Polymer Blends With Partial and Complete Wetting Structures. Polymer, 54(25), 6739-6751.
  - Ravati, S., & Favis, B. D. (2013). Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena. Polymer (United Kingdom), 54(13), 3271-3281.
- 2012
  - Bhadane, P. A., Cheng, J., Ellul, M. D., & Favis, B. D. (2012). Decoupling of reactions in reactive polymer blending for nanoscale morphology control. Journal of Polymer Science, Part B: Polymer Physics, 50(23), 1619-1629.
  - Le Corroller, P., & Favis, B. D. (2012). Droplet-in-droplet polymer blend microstructures: A potential route toward the recycling of co-mingled plastics. Macromolecular Chemistry and Physics, 213(19), 2062-2074.
  - Cercle, C., & Favis, B. D. (2012). Generalizing interfacial modification in polymer blends. Polymer (United Kingdom), 53(20), 4338-4343.
- 2011
  - Li, G., Sarazin, P., Orts, W. J., Imam, S. H., & Favis, B. D. (2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology. Macromolecular Chemistry and Physics, 212(11), 1147-1154.
  - Ravati, S., & Favis, B. D. (2011). 3D porous polymeric conductive material prepared using LbL deposition. Polymer, 52(3), 718-731.
  - Le Corroller, P., & Favis, B. D. (2011). Effect of viscosity in ternary polymer blends displaying partial wetting phenomena. Polymer, 52(17), 3827-3834.
  - Bhadane, P. A., Tsou, A. H., Cheng, J., Ellul, M., & Favis, B. D. (2011). Morphology and continuity development in highly reactive nanoscale polymer blends. Polymer, 52(22), 5107-5117.
  - Virgilio, N., & Favis, B. D. (2011). Self-assembly of Janus composite droplets at the interface in quaternary immiscible polymer blends. Macromolecules, 44(15), 5850-5856.
  - Virgilio, N., Sarazin, P., & Favis, B. D. (2011). Ultraporous poly(l-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface. Polymer, 52(7), 1483-1489.
- 2010
  - Ravati, S., & Favis, B. D. (2010). Low percolation threshold conductive device derived from a five-component polymer blend. Polymer, 51(16), 3669-3684.
  - Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2010). Modified interfacial tensions measured in situ in ternary polymer blends demonstrating partial wetting. Polymer, 51(6), 1472-1484.
  - Ravati, S., & Favis, B. D. (2010). Morphological states for a ternary polymer blend demonstrating complete wetting. Polymer, 51(20), 4547-4561.
  - Li, G., & Favis, B. D. (2010). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic-starch blends. Macromolecular Chemistry and Physics, 211(3), 321-333.
  - Arroyo, O. H., Huneault, M. A., Favis, B. D., & Bureau, M. (2010). Processing and properties of PLA/Thermoplastic starch/Montmorillonite nanocomposites. Polymer Composites, 31(1), 114-127.
  - Mihai, M., Huneault, M. A., & Favis, B. D. (2010). Rheology and extrusion foaming of chain-branched poly(lactic acid). Polymer Engineering and Science, 50(3), 629-642.
  - Virgilio, N., Sarazin, P., & Favis, B. D. (2010). Towards ultraporous poly(L-lactide) scaffolds from quaternary immiscible polymer blends. Biomaterials, 31(22), 5719-5728.
- 2009
  - Xiang, Z., Sarazin, P., & Favis, B. D. (2009). Controlling burst and final drug release times from porous polylactide devices derived from co-continuous polymer blends. Biomacromolecules, 10(8), 2053-2066.
  - Mihai, M., Huneault, M. A., & Favis, B. D. (2009). Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide. Journal of Applied Polymer Science, 113(5), 2920-2932.
  - Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2009). In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting. Macromolecules, 42(19), 7518-7529.
  - Taguet, A., Huneault, M. A., & Favis, B. D. (2009). Interface/morphology relationships in polymer blends with thermoplastic starch. Polymer, 50(24), 5733-5743.
  - Virgilio, N., Marc-Aurele, C., & Favis, B. D. (2009). Novel self-assembling close-packed droplet array at the interface in ternary polymer blends. Macromolecules, 42(9), 3405-3416.
  - Tsou, A. H., Favis, B. D., Hara, Y., Bhadane, P. A., & Kirino, Y. (2009). Reactive compatibilization in brominated poly(isobutylene-co-p- methylstyrene) and polyamide blends. Macromolecular Chemistry and Physics, 210(5), 340-348.
- 2008
  - El Ouassini, A., Saucier, A., Marcotte, D., & Favis, B. D. (2008). A Patchwork Approach to Stochastic Simulation: a Route Towards the Analysis of Morphology in Multiphase Systems. Chaos, Solitons & Fractals, 36(2), 418-436.
  - Sarazin, P., Li, G., Orts, W. J., & Favis, B. D. (2008). Binary and Ternary Blends of Polylactide, Polycaprolactone and Thermoplastic Starch. Polymer, 49(2), 599-609.
  - Bhadane, P. A., Tsou, A. H., Cheng, J., & Favis, B. D. (2008). Morphology Development and Interfacial Erosion in Reactive Polymer Blending. Macromolecules, 41(20), 7549-7559.
  - Salehi, P., Sarazin, P., & Favis, B. D. (2008). Porous Devices Derived From Co-Continuous Polymer Blends as a Route for Controlled Drug Release. Biomacromolecules, 9(4), 1131-1138.
  - Li, G., Sarazin, P., & Favis, B. D. (2008). The Relationship Between Starch Gelatinization and Morphology Control in Melt-Processed Polymer Blends With Thermoplastic Starch. Macromolecular Chemistry and Physics, 209(10), 991-1002.
- 2007
  - Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007). Extrusion Foaming of Semi-Crystalline Pla and Pla/Thermoplastic Starch Blends. Macromolecular Bioscience, 7(7), 907-920.
  - Mihai, M., Huneault, M. A., & Favis, B. D. (2007). Foaming of Polystyrene/Thermoplastic Starch Blends. Journal of Cellular Plastics, 43(3), 215-236.
  - Salehi, P., Sarazin, P., & Favis, B. D. (2007). Model porous polymer blends as a route for controlled release. PMSE Preprints, 97, 165-166.
  - Sarazin, P., & Favis, B. D. (2007). Stability of the Co-Continuous Morphology During Melt Mixing for Poly(Epsilon-Caprolactone)/Polystyrene Blends. Journal of polymer science. Part B, Polymer physics, 45(7), 864-872.
  - Zhang, J., Ravati, S., Virgilio, N., & Favis, B. D. (2007). Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends. Macromolecules, 40(25), 8817-8820.
- 2006
  - Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), 2760-2771.
  - Bhadane, P. A., Virgilio, N., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AICHE Journal, 52(10), 3411-3420.
  - Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension. Journal of polymer science. Part B, Polymer physics, 44(14), 1919-1929.
  - Yuan, Z., & Favis, B. D. (2006). Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing. Journal of polymer science. Part B, Polymer physics, 44(4), 711-721.
  - Sarazin, P., Virgilio, N., & Favis, B. D. (2006). Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks. Journal of Applied Polymer Science, 100(2), 1039-1047.
  - Roy, X., Sarazin, P., & Favis, B. D. (2006). Ultraporous nanosheath materials by layer-by-layer deposition onto co-continuous polymer-blend templates. Advanced Materials, 18(8), 1015-1019.
- 2005
  - Yuan, Z. H., & Favis, B. D. (2005). Coarsening of Immiscible Co-Continuous Blends During Quiescent Annealing. AICHE Journal, 51(1), 271-280.
  - Virgilio, N., Favis, B. D., Pepin, M. F., Desjardins, P., & L'Espérance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), 2368-2375.
  - Sarazin, P., & Favis, B. D. (2005). Influence of Temperature-Induced Coalescence Effects on Co-Continuous Morphology in Poly(Epsilon-Caprolactone)/Polystyrene Blends. Polymer, 46(16), 5966-5978.
  - Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), 300-309.
- 2004
  - Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2004). Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin-screw extrusion. Polymer Engineering and Science, 44(4), 749-759.
  - Sarazin, P., Roy, X., & Favis, B. D. (2004). Controlled Preparation and Properties of Porous Poly(L-Lactide) Obtained From a Co-Continuous Blend of Two Biodegradable Polymers. Biomaterials, 25(28), 5965-5978.
  - Yuan, Z., & Favis, B. D. (2004). Macroporous polylactide of controlled pore size derived from the annealing of co-continuous polystyrene/polylactide blends. Biomaterials, 25(11), 2161-2170.
  - Rodriguez-Gonzales, F. J., Ramsay, B. A., & Favis, B. D. (2004). Rheological and thermal properties of thermoplastic starch with high glycerol content. Carbohydrate polymer, 58(2), 139-147.
  - Riscanu, D., Favis, B. D., Feng, C. Y., & Matsuura, T. (2004). Thin-Film Membranes Derived From Co-Continuous Polymer Blends: Preparation and Performance. Polymer, 45(16), 5597-5609.
- 2003
  - Reignier, J., & Favis, B. D. (2003). Core-Shell Structure and Segregation Effects in Composite Droplet Polymer Blends. AICHE Journal, 49(4), 1014-1023.
  - Reignier, J., Favis, B. D., & Heuzey, M.-C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-Type Polymer Blends. Polymer, 44(1), 49-59.
  - Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003). High performance LDPE/thermoplastic starch blends: A sustainable alternative to pure polyethylene. Polymer, 44(5), 1517-1526.
  - Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. D. (2003). Influence of Melt Drawing on the Morphology of One- and Two-Step Processed Ldpe/Thermoplastic Starch Blends. Advances in Polymer Technology, 22(4), 297-305.
  - Sarazin, P., & Favis, B. D. (2003). Morphology Control in Co-Continuous Poly(L-Lactide)/Polystyrene Blends: a Route Towards Highly Structured and Interconnected Porosity in Poly(L-Lactide) Materials. Biomacromolecules, 4(6), 1669-1679.
  - Reignier, J., & Favis, B. D. (2003). On the presence of a critical shell volume fraction leading to pseudo-pure droplet behavior in composite droplet polymer blends. Polymer, 44(18), 5061-5066.
- 2002
  - Marin, N., & Favis, B. D. (2002). Co-Continuous Morphology Development in Partially Miscible Pmma/Pc Blends. Polymer, 43(17), 4723-4731.
  - Ma, P. L., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2002). Effect of dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends. Polymer Engineering and Science, 42(10), 1976-1989.
  - Li, J., & Favis, B. D. (2002). Strategies to measure and optimize the migration of the interfacial modifier to the interface in immiscible polymer blends. Polymer, 43(18), 4935-4945.
  - Jianming, L., Ma, P. L., & Favis, B. D. (2002). The role of the blend interface type on morphology in cocontinuous polymer blends. Macromolecules, 35(6), 2005-2016.
- 2001
  - González-Nuñez, R., Padilla, H., De Kee, D., & Favis, B. D. (2001). Barrier Properties of Polyamide-6/High Density Polyethylene Blends. Polymer Bulletin, 46(4), 323-330.
  - Li, J., & Favis, B. D. (2001). Characterizing Co-Continuous High Density Polyethylene/Polystyrene Blends. Polymer, 42(11), 5047-5053.
  - Gonzalez-Nunez, R., Arellano, M., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. D. (2001). Determination of a Limiting Dispersed Phase Concentration for Coalescence in Pa6/Hdpe Blends Under Extensional Flow. Polymer, 42(12), 5485-5489.
  - Weidong, W., Liang, H., Favis, B. D., & Schreiber, H. P. (2001). Surface modification strategies for multicomponent polymer systems. III : Effect of diblock copolymer-modified rutile on the morphology and mechanical properties of LLDPE/PVC blends. Journal of Applied Polymer Science, 81(8), 1891-1901.
- 2000
  - Reignier, J., & Favis, B. D. (2000). Control of the subinclusion microstructure in HDPE/PS/PMMA ternary blends. Macromolecules, 33(19), 6998-7008.
  - Lepers, J.-C., Favis, B. D., & Kent, S. L. (2000). Interface-property relationships in biaxially stretched PP-PET blends. Polymer, 41(5), 1937-1946.
  - Liang, H., Xu, R., Favis, B. D., & Schreiber, H. P. (2000). Interfacial tension and acid-base approaches to polymer interactions. Journal of polymer science. Part B, Polymer physics, 38(16), 2096-2104.
  - Martin, P., Carreau, P., Favis, B. D., & Jérôme, R. (2000). Investigating the morphology/rheology inter-relationships in immiscible polymer blends. Journal of Rheology, 44(3), 568-583.
  - Chapleau, N., Favis, B. D., & Carreau, P. (2000). Measuring the Interfacial Tension of Polyamide/Polyethylene and Polycarbonate/Polypropylene Blends: Effect of Temperature. Polymer, 41(17), 6695-6698.
  - Everaert, V., Groeninckx, G., Pionteck, J., Favis, B. D., Aerts, L., Moldenaers, P., & Mewis, J. (2000). Miscible PS/PPE Compounds: an Alternative for Blend Phase Morphology Studies? Influence of the PPE Content on the Surface Tension of PS/PPE and on the Interfacial Tension in PP/(PS/PPE) and Pom/(PS/PPE) Blends. Polymer, 41(3), 1011-1025.
  - Mekhilef, N., Carreau, P., Favis, B. D., Martin, P., & Ouhlal, A. (2000). Viscoelastic Properties and Interfacial Tension of Polystyrene- Polyethylene Blends. Journal of Polymer Science. Part B: Polymer Physics, 38(10), 1359-1368.
- 1999
  - Liang, H., Favis, B. D., Yu, Y. S., & Eisenberg, A. (1999). Correlation Between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of Lldpe and Pvc. Macromolecules, 32(5), 1637-1642.
  - Odje, S., Vu-Khanh, T., Cigana, P., & Favis, B. D. (1999). Influence of Triblock Copolymer Interfacial Modifiers on Fracture Behavior of Polystyrene/Ethylene-Propylene Rubber Blends. Polymer Engineering and Science, 39(7), 1265-1278.
  - Lacasse, C., & Favis, B. D. (1999). Interface/morphology/property relationships in polyamide-6/ABS blends. Advances in Polymer Technology, 18(3), 255-265.
  - Lepers, J. C., & Favis, B. D. (1999). Interfacial Tension Reduction and Coalescence Suppression in Compatibilized Polymer Blends. AICHE Journal, 45(4), 887-895.
  - Polizu, S., Favis, B. D., & Vu-Khanh, T. (1999). Morphology-Interface-Property Relationships in Polystyrene/Ethylene-Propylene Rubber Blends. 2. Influence of Areal Density and Interfacial Saturation of Diblock and Triblock Copolymer Interfacial Modifiers. Macromolecules, 32(10), 3448-3456.
  - Liang, H., Xu, R. J., Favis, B. D., & Schreiber, H. P. (1999). Surface Modification Strategies for Multicomponent Polymer Systems - VI: Acid-Base Interactions as a Strategy for Interfacial Modification in Immiscible Polymer Blends. Polymer, 40(15), 4419-4423.
  - Lepers, J. C., Favis, B. D., & Lacroix, C. (1999). The influence of partial emulsification on coalescence suppression and interfacial tension reduction in PP/PET blends. Journal of polymer science. Part B, Polymer physics, 37(9), 939-951.
- 1998
  - Bourry, D., & Favis, B. D. (1998). Cocontinuity and Phase Inversion in HDPE/PS Blends: Influence of Interfacial Modification and Elasticity. Journal of polymer science. Part B, Polymer physics, 36(11), 1889-1899.
  - Jack, K. S., Natansohn, A., Jiahu, W., Favis, B. D., & Cigana, P. (1998). Determination of domain sizes in compatibilized polystyrene(ps)-(ethylene-propylene rubber)(epr) blends by measurements of proton spin diffusion. Chemistry of Materials, 10(5), 1301-1308.
  - Chapleau, N., Favis, B. D., & Carreau, P. (1998). Measuring the Interfacial Tension of Polymers in the Presence of an Interfacial Modifier: Migrating the Modifier to the Interface. Journal of polymer science. Part B, Polymer physics, 36(11), 1947-1958.
  - Bourry, D., & Favis, B. D. (1998). Morphology Development in a Polyethylene/Polystyrene Binary Blend During Twin-Screw Extrusion. Polymer, 39(10), 1851-1856.
  - Cigana, P., & Favis, B. D. (1998). Relative Efficacy of Diblock and Triblock Copolymers for a Polystyrene/Ethylene-Propylene Rubber Interface. Polymer, 39(15), 3373-3378.
- 1997
  - Favis, B. D., Cigana, P., Matos, M., & Tremblay, A. (1997). Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend. Canadian Journal of Chemical Engineering, 75(2), 273-281.
  - Mamat, A., Vukhanh, T., Cigana, P., & Favis, B. D. (1997). Impact fracture behavior of nylon-6/abs blends. Journal of polymer science. Part B, Polymer physics, 35(16), 2583-2592.
  - Mekhilef, N., Favis, B. D., & Carreau, P. (1997). Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends. Journal of polymer science. Part B, Polymer physics, 35(2), 293-308.
  - Cigana, P., Favis, B. D., Albert, C., & Vu-Khanh, T. (1997). Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends. 1. Influence of triblock copolymer interfacial modifiers. Macromolecules, 30(14), 4163-4169.
  - Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1997). Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend. Polymer, 38(20), 5085-5089.
  - St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (1997). Processing and characterization of thermoplastic starch/polyethylene blends. Polymer, 38(3), 647-655.
  - Liang, H., & Favis, B. D. (1997). Surface modification strategies for multicomponent polymer systems. 2. Study of the interfacial tension and morphology of linear low-density polyethylene/poly(vinyl chloride) blends. Industrial & Engineering Chemistry Research, 36(4), 1211-1217.
  - Lepers, J.-C., Favis, B. D., & Tabar, R. J. (1997). The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends. Journal of polymer science. Part B, Polymer physics, 35(14), 2271-2280.
- 1996
  - Gonzalez-Nunez, R., Chan Man Fong, C. F., Favis, B. D., & De Kee, D. (1996). Deformation of drops in extensional viscoelastic flow. Journal of Applied Polymer Science, 62(10), 1627-1634.
  - Cigana, P., Favis, B. D., & Jerome, R. (1996). Diblock copolymers as emulsifying agents in polymer blends: influence of molecular weight, architecture, and chemical composition. Journal of polymer science. Part B, Polymer physics, 34(9), 1691-1700.
  - Lomellini, P., Matos, M., & Favis, B. D. (1996). Interfacial modification of polymer blends : the emulsification curve : 2. Predicting the critical concentration of interfacial modifier from geometrical considerations. Polymer, 37(25), 5689-5694.
  - Fellahi, S., Favis, B. D., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626.
  - Lacroix, C., Bousmina, M., Carreau, P., Favis, B. D., & Michel, A. (1996). Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties. Polymer, 37(14), 2939-2947.
  - Leclair, A., & Favis, B. D. (1996). Role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties. Polymer, 37(21), 4723-4728.
  - Gonzalez-Nunez, R., De Kee, D., & Favis, B. D. (1996). The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends. Polymer, 37(21), 4689-4693.
  - Verhoogt, H., Ramsay, B. A., Favis, B. D., & Ramsay, J. A. (1996). The influence of thermal history on the properties of poly(3-hydroxyburate-co-12%-3-hydroxyvalerate). Journal of Applied Polymer Science, 61(1), 87-96.
- 1995
  - Cigana, P., Favis, B. D., & Jerome, R. (1995). Effect of molecular weight and architecture of the compatibilizing agent on the emulsification of polystyrene/ethylene-propylene rubber blends. Polymeric Materials Science and Engineering, 73, 16-17.
  - Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial tension using the breaking thread method: Effect of temperature and of interfacial modifier. Polymeric Materials Science and Engineering, 73, 18-19.
  - Chapleau, N., Favis, B. D., & Carreau, P. (1995). Evaluation of the interfacial-tension using the breaking thread method - effect of temperature and ot interfacial modifier. Abstracts of Papers of the American Chemical Society, 210, 10-10.
  - Matos, M., Favis, B. D., & Lomellini, P. (1995). Interfacial modification of polymer blends--the emulsification curve. I. Influence of molecular weight and chemical composition of the interfacial modifier. Polymer, 36(20), 3899-3907.
  - Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (1995). Locating the modifier in a polymer blend by electron energy-loss spectroscopy. Macromolecules, 28(13), 4771-4773.
  - Fellahi, S., Favis, B. D., & Fisa, B. (1995). Tensile dilatometry of injection-moulded HDPE/PA6 blends. Journal of Materials Science, 30(21), 5522-5530.
  - Fellahi, S., Meddad, A., Fisa, B., & Favis, B. D. (1995). Weldlines in injection-molded parts: a review. Advances in Polymer Technology, 14(3), 169-195.
  - Fellahi, S., Fisa, B., & Favis, B. D. (1995). Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. Journal of Applied Polymer Science, 57(11), 1319-1332.
- 1994
  - Favis, B. D. (1994). Phase size/interface relationships in polymer blends: The emulsification curve. Polymer, 35(7), 1552-1555.
  - Bélanger, C., Cielo, P., Favis, B. D., Patterson, W. I., & Utracki, L. A. (1994). Polarized light scattering approach for simulated polymer blend morphology characterization. Polymer Engineering and Science, 34(21), 1589-1589.
  - Verhoogt, H., Ramsay, B. A., & Favis, B. D. (1994). Polymer blends containing poly(3-hydroxyalkanoate)s. Polymer, 35(24), 5155-5169.
  - Legros, A., Carreau, P., Favis, B. D., & Michel, A. (1994). Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer, 35(4), 758-764.
- 1992
  - Favis, B. D. (1992). Processing/morphology/rheology relationships in polymer blends. Die makromolekulare Chemie, 56(1), 143-150.
Communications de conférence (70)
- 2023
  - Li, Y., Gancheva, T., Estakhrianhaghighi, E., Favis, B. D., & Akbarzadeh, A. (mai 2023). Tough 3D printed biopolymeric cellular beams [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6.
- 2016
  - Li, X., Mehr, N. G., Favis, B. D., De Crescenzo, G., Yakandawala, N., & Hoemann, C. D. (août 2016). Fusion peptide P15-CSP coatings promote in vitro osteogenesis in 84 and 141 micron pores of 3-D poly(epsilon-caprolactone) scaffolds [Communication écrite]. 25th International Materials Research Congress (IMRC 2016), Cancún, Mexico.
- 2015
  - Jegat, C., Virgilio, N., & Favis, B. D. (novembre 2015). Design d'une interface hydrophile/hydrophobe dans un matériau polymère à réservoirs lipidiques [Présentation]. Dans 44e Colloque national du Groupe français d'études et d'applications des polymères, Belvaux, Luxembourg.
- 2014
  - Jalali Dil, E., & Favis, B. D. (avril 2014). Effect of the localization of silica particles on the morphology of poly(lactic acid)/polyethylene blends [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states.
  - Zolali, A. M., & Favis, B. D. (avril 2014). Morphology and physical properties of biodegradable multicomponent blends with polylactic acid [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states.
  - Heshmati, V., Kamal, M. R., & Favis, B. D. (avril 2014). Poly (Lactic acid)/Polyamide11/Cellulose Multiphase Systems [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states.
- 2012
  - Taghizadeh, A., & Favis, B. D. (avril 2012). Carbon nanotubes in blends of thermoplastic starch/polycaprolactone [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states.
  - Cao, V., Margni, M., Favis, B. D., & Deschênes, L. (mai 2012). Development of an integrated indicator for land use based on ecosystem services [Résumé]. 6th SETAC World Congress/SETAC Europe 22nd Annual Meeting, Berlin, Germany.
  - Taghizadeh, A., & Favis, B. D. (avril 2012). Effect of the molecular structure of plasticizer on the morphology of polymer blends with thermoplastic starch [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states.
  - Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. D. (avril 2012). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states.
  - Ravati, S., Beaulieu, C., Deschênes, L., Cao, V., & Favis, B. D. (avril 2012). Multi-component bio-based blends with polylactic acid and polyhydroxybutyrate: Morphology and physical properties [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states.
  - Ravati, S., & Favis, B. D. (avril 2012). Multicomponent biodegradable blends with poly(butylene succinate): Partial and complete wetting phenomena [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states.
  - Jalali Dil, E., & Favis, B. D. (avril 2012). Selective localization of spherical silica particles in heterophase poly(lactic acid)/ low density polyethylene blends [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012), Orlando, FL, United states.
- 2011
  - Li, G., Sarazin, P., & Favis, B. D. (mai 2011). Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology [Communication écrite]. 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United states.
- 2010
  - Taghizadeh, A., & Favis, B. D. (mai 2010). Effect of heat and shear on the gelatinization of thermoplastic starch with various plasticizers [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA.
  - Li, G., & Favis, B. D. (mai 2010). Morphology development and interfacial interactions in polycaprolactone/ thermoplastic starch blends [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA.
  - Virgilio, N., Sarazin, P., & Favis, B. D. (décembre 2010). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Résumé]. 6th CREPEC Annual Colloquium, Montréal, Québec.
  - Virgilio, N., Sarazin, P., & Favis, B. D. (octobre 2010). Novel microstructures induced by partial wetting in ternary and quaternary immiscible polymer blends [Résumé]. 60th Canadian Chemical Engineering Conference (CSCHE 2010), Saskatoon, Saskatchewan.
- 2009
  - Mihai, M., Huneault, M. A., & Favis, B. D. (juin 2009). Crystallinity development in cellular poly (lactic acid) in the presence of supercritical carbon dioxide [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states.
- 2008
  - Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (juin 2008). The Neumann triangle method to measure interfacial tensions in immiscible polymer blends using focused ion beam and atomic force microscopy [Communication écrite]. 24th Annual meeting of Polymer Processing Society, Salerno, Italy.
- 2007
  - Virgilio, N., Marc-Aurele, C., & Favis, B. D. (mai 2007). Novel self-assembling morphologies in multicomponent polymer blends [Communication écrite]. ANTEC 2007, Cincinnati, OH, United States.
  - Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (août 2007). Novel self-assembling pearl necklace microstructure induced by partial wetting in ternary polymer blends [Résumé]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA.
  - Tsou, A. H., Favis, B. D., Hara, Y., Bhadane, P. A., & Kirino, Y. (octobre 2007). Reactive compatibilization in polyamide and bimsm blends [Communication écrite]. 172nd ACS Rubber Division Meeting - Fall 2007, Cleveland, Ohio, USA.
  - Ravati, S., Virgilio, N., Jianhing, Z., & Favis, B. D. (août 2007). Structured multiple percolated polymer blends [Communication écrite]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA.
- 2005
  - Sarazin, P., Huneault, M. A., Orts, W., & Favis, B. D. (mai 2005). Blends of polylactide with thermoplastic starch [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA.
  - Bhadane, P., Favis, B. D., Huneault, M. A., Champagne, M., & Tofan, F. (mai 2005). Erosion and continuity development in high viscosity ratio epdm/pp blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA.
  - Mihai, M. H., Huneault, M. A., & Favis, B. D. (mai 2005). Foams extruded from polystyrene / thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA.
  - Virgilio, N., Pépin, M. F., Desjardins, P., L'Espérance, G., & Favis, B. D. (août 2005). High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy [Communication écrite]. PPS 2005 America's Regional Meeting of the Polymer Processing Society, Québec, QC, Canada..
  - Gang, L., Sarazin, P., Zhenhua, Y., & Favis, B. D. (mai 2005). Morphology and rheology of polycaprolactone/thermoplastic starch blends [Communication écrite]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA.
- 2003
  - Sarazin, P., Virgilio, N., & Favis, B. D. (septembre 2003). Morphology control in co-continuous poly(L-lactide)/polystyrene blends : a route towards highly structured and interconnected porosity in poly(L-lactide) materials [Communication écrite]. PPS 2003 Europe-Africa Meeting of the Polymer Processing Society, Athens, Greece.
- 2002
  - Yuan, Z., & Favis, B. D. (mai 2002). Annealing of a co-continuous polystyrene/polylactide blend and its influence on the morphology [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA.
  - Bhadane, P. A., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of viscosity ratio on co-continuity for ethylene-propylene-diene terpolymer/polypropylene blends [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers.
  - Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. Subinclusion morphologies in HDPE/PS/PMMA ternary blends prepared by twin screw extrusion [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers.
- 2001
  - Marin, N., & Favis, B. D. (janvier 2001). Co-continuous morphology development in partially miscible binary polymer blends [Communication écrite]. PPS-17, Montréal, Québec.
  - Reignier, J., & Favis, B. D. (mai 2001). Composite drop viscosity ratio effect on the morphology of hdpe/ps/pmma ternary blends [Communication écrite]. Antec 2001, Dallas, Texas.
  - Ma, P. L., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. Effect of compatibilization and dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers.
  - Sararin, P., & Favis, B. D. (mai 2001). Interfacial tension, phase inversion and co-continuity in poly(l-lactide) polystyrene blends [Communication écrite]. Antec 2001, Dallas, Texas.
  - Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. D. (mai 2001). Melt drawing of ldpe/thermoplastic starch blends [Communication écrite]. Antec 2001, Dallas, Texas.
  - Li, J., Ma, P. L., & Favis, B. D. (janvier 2001). Role of the blend interface type on morphology in co-continous polymer blends [Communication écrite]. PPS-17, Montréal, Québec.
  - Rodriguez-Gonzalez, F., & Favis, B. D. (janvier 2001). Study of the rheological and thermal properties of thermoplastic starch [Communication écrite]. PPS-17, Montréal, Québec.
- 2000
  - Li, J., Ma, P., & Favis, B. D. Co-continuous homopolymer/copolymer blends [Communication écrite]. ANTEC : Annual Technical Conference. Society of Plastics Engineers.
  - Reignier, J., & Favis, B. D. (janvier 2000). Controlling complex morphologies in immiscible polymer blends [Communication écrite]. PPS-16, Shanghai, China.
  - Gonzalez-Nunez, R., Moscoso, F. J., Gonzalez-Romero, V. M., & Favis, B. D. (mai 2000). Determination of a limit in particle concentration for coalescence in pa6/hdpe blends under extensional flow [Communication écrite]. Antec 2000, Orlando, FL.
- 1999
  - Li, J., & Favis, B. D. (mai 1999). Characterising co-continuous polyethylene/polystyrene blends [Communication écrite]. Antec '99. 57th Annual Technical Conference, New-York, NY.
  - Reignier, J., & Favis, B. D. (janvier 1999). Control of the su-inclusion microstructure in HDPE/PS/PMMA ternary blends [Communication écrite]. Polyblends 99, Industrial materials institute, Boucherville, Québec.
  - Gonzalez, F. J. R., Ramsay, B. A., & Favis, B. D. Low density polyethylene/thermoplastic starch blends: effect of glycerol content and LDPE concentration on morphology and tensile properties in the dual phase continuity region [Communication écrite]. ANTEC : Annual Technical Conference. Society of Plastics Engineers.
  - Lepers, J.-C., Favis, B. D., & Kent, S. L. Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Communication écrite]. Imaging and Image Analysis Applications for Plastics.
  - Reignier, J., & Favis, B. D. (mai 1999). Sub-inclusion morphologies in hdpe/ps/pmma ternary blend [Communication écrite]. Antec '99. Volume II, New York.
- 1997
  - Cigana, P., Benoit, V., Tremblay, A., & Favis, B. D. (avril 1997). Detection of block copolymer micelles in compatibilized polymer blends: An indirect method [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can.
  - Lacasse, C., & Favis, B. D. (octobre 1997). Effects of extruder type, compatibilizer level and composition on the morphology and impact strength of a polyamide-6/ABS blend [Communication écrite]. 1997 International Symposium on Polymer Blends, Alloys and Filled Systems, POLYBLENDS, Boucherville, Can.
  - Gaona-Torres, J., Gonzalez-Nunez, R., & Favis, B. D. (avril 1997). Influence of melt-drawn ratio and composition on drop coalescence in nylon 6/hdpe blends [Communication écrite]. Antec 97. Volume II, Toronto.
  - Chapleau, N., Favis, B. D., & Carreau, P. (avril 1997). Morphology of polyamide/polyethylene blends under extensional flow: Effect of compatibilization [Communication écrite]. 55th Annual Technical Conference (ANTEC 1997), Toronto, Can.
  - Matos, M. E., Rosales, C., Mueller, A. J., & Favis, B. D. (avril 1997). Polystyrene/polypropylene blends: morphology/interphase relationship, rheological and calorimetric behaviour [Communication écrite]. Antec 97. Volume II, Toronto.
  - Lepers, J.-C., Favis, B. D., & Kent, S. L. (avril 1997). Study of the morphology and the tensile mechanical properties of biaxially oriented PET/PP blends [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can.
  - Liang, H., Favis, B. D., Yu, Y., & Eisenberg, A. (avril 1997). Surface modification strategies for multi-component polymer systems, IV: Block copolymers as interfacial modifiers for blends of LLDPE and PVC [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can.
- 1996
  - Bourry, D., & Favis, B. D. (janvier 1996). Development of the morphology of an immiscible binary blend during twin-srew extrusion [Communication écrite]. 12th annual meeting of the polymer processing society, Sorrento, Italy.
  - St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verghoogt, H. (janvier 1996). Thermoplastic starch/polyethylene blends [Communication écrite]. 12th annual meeting of the polymer processing society, Sorrento, Italy.
  - Mekhilef, N., Carreau, P., & Favis, B. D. (janvier 1996). Viscoelastic properties of polystyrene-polyethylene blends: interfacial tension measurements using the breaking thread method and predictions with an emulsion model [Communication écrite]. 12th Annual Meeting of the Polymer Processing Society, Sorrento, Italy.
- 1995
  - Bourry, D., & Favis, B. D. (mai 1995). Co-continuity and phase inversion in HDPE/PS blends: the role of interfacial modification [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
  - Gonzalez-Nunez, R., DeKee, D., & Favis, B. D. (mai 1995). Experimental study of deformation and coalescence effects of the minor phase in immiscible polymer blends [Communication écrite]. Antec '95. Vol.II, Boston, Ma.
  - Mekhilef, N., Favis, B. D., & Carreau, P. (mai 1995). Morphological stability of polystyrene polyethylene blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
  - Verhoogt, H., Truchon, F. S., Favis, B. D., St-Pierre, N., & Ramsay, B. A. (mai 1995). Morphology and mechanical properties of blends containing thermoplastic starch and P(HB-co-12%-HV) [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
  - Lepers, J.-C., & Favis, B. D. (mai 1995). Morphology/interface relationships in polyester/polyolefin blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
  - Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (mai 1995). Spectroscopic analyses of compatibilized polymer blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
  - St-Pierre, N., Favis, B. D., Ramsay, B. A., Ramsay, J. A., & Verhoogt, H. (octobre 1995). Thermoplastic starch/polyethylene blends [Communication écrite]. 1995 SPE Regional Technical Conference on Polymer Alloys and Blends/Polyblends'95, Boucherville, Can.
- 1994
  - Verhoogt, H., St-Pierre, N., Truchon, F. S., Ramsay, B. A., Favis, B. D., & Ramsay, J. A. (août 1994). Blends containing poly(hydroxybutyrate-co-12%-hydroxyvalerate) and thermoplastic starch [Communication écrite]. 4th International symposium on bacterial polyhydroxyalkanoates, Montréal, Québec. Publié dans Canadian Journal of Microbiology, 41(SUP1).
  - Matos, M., Lomellini, P., & Favis, B. D. (mai 1994). Influence of some molecular parameters of the interfacial modifier on the emulsification of polystyrene/ethylene-propylene rubber blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA.
  - Favis, B. D., Matos, M., Tremblay, A., & Lepers, J.-C. (janvier 1994). Interface/morphology relationships in polymer blends [Communication écrite]. Polymer processing society, European regional meeting, Strasbourg, France.
  - Fellahi, S., Favis, B. D., & Fisa, B. (mai 1994). Tensile dilatometry of injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA.
  - Fellahi, S., Fisa, B., & Favis, B. D. (mai 1994). Weldline strength evaluation in injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA.
Brevets (6)
- 2017
  - Favis, B. D., & Le Corroller, P. (2017). Polymeric material and process for recycling plastic blends. (Brevet no US9670344).
- 2011
  - Favis, B. D., Sarazin, P., Li, J., & Yuan, Z. (2011). Microporous articles comprising biodegradable medical polymers, method of preparation thereof and method of use thereof. (Brevet no US8007823).
- 2007
  - Favis, B. D., Sarazin, P., & Roy, X. (2007). Porous nanosheath networks, method of making and uses thereof. (Demande de brevet no WO2007053955).
- 2006
  - Favis, B. D., Yuan, Z., & Riscanu, D. (2006). Thermoplastic starch and synthetic polymer blends and method of making. (Demande de brevet no WO2006116861).
- 2005
  - Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2005). Method of making polymer compositions containing thermoplastic starch. (Brevet no US6844380).
- 2003
  - Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2003). Polymer compositions containing thermoplastic starch. (Brevet no US6605657).

Répertoire des expertises

Favis, Basil D.

Répertoire des expertises

Favis, Basil D.

Vous êtes ici

Publications par type

Basil Favis (243)