Laboratoire de structures de fibres et de composites avancés

Publications

Laboratoire de structures de fibres et de composites avancés

Publications

Laboratoire de structures de fibres et de composites avancés

Contactez-nous

Téléphone
(514) 340-4711 poste 3933

Local
B-450.30

louis.laberge-lebel@polymtl.ca

Publications

Publications par type

Trier par date de publication

Article de revue (50) Communication de conférence (65) Livre (1) Chapitre de livre (2) Brevet (14) Thèse (2) Ensemble de données

Articles de revue (50)
- 2026
  - Popiolek, A., Laberge Lebel, L., Ahrens, C. H., Mariz de Oliveira Barra, G., & Ferrari de Souza, A. (2026). Mechanical properties of plastic parts produced by molds manufactured by additive manufacturing technology (LPBF) with conformal cooling channels. The International Journal of Advanced Manufacturing Technology, 13 pages.
- 2025
  - El-Jakl, M., & Laberge Lebel, L. (2025). Braid-trusion of hollow thermoplastic composites using an expanding mandrel approach. Composites Part B Engineering, 305, 112677 (10 pages).
  - Assi, P., Talos, C. S., Achiche, S., & Laberge Lebel, L. (2025). Design and characterization of an active spool tensioner for braiding machines. The International Journal of Advanced Manufacturing Technology, 141(9-10), 5653-5663.
  - El-Jakl, M., & Laberge Lebel, L. (2025). Fibre waviness reduction in thermoplastic pultrusion by using DREF yarns. Composites Part B: Engineering, 288, 111908.
  - Hamon, E., & Laberge Lebel, L. (2025). Multi-die thermoplastic pultrusion of carbon reinforced PolyEtherKetoneKetone bars at 1m/min using preimpregnated tape. Composites Part B Engineering, 312, 113305 (12 pages).
- 2024
  - Abdin, Y., Ghaedsharaf, M., & Laberge Lebel, L. (2024). An integrated approach toward digital design and simulation of the automated overbraiding process for composite manufacturing. Materials Today Communications, 110559-110559.
  - Vazeille, F., & Laberge Lebel, L. (2024). Envelope enrichment method for homogenization of non-periodic structures. Composite Structures, 329, 117819 (9 pages).
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2024). Horngear and carrier design for braiding tailorable composite preforms. CIRP Journal of Manufacturing Science and Technology, 50, 228-237.
- 2023
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for detecting carriers' collisions in braiding machines. International Journal of Advanced Manufacturing Technology, 126(5-6), 2337-2348.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2023). Application of graph theory for preventing carriers' collisions in variable path braiding machines. International Journal of Advanced Manufacturing Technology, 126(9-10), 4581-4589.
- 2022
  - Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites. Composites Part a-Applied Science and Manufacturing, 163, 107176 (12 pages).
  - Lessard, F., Dubé, M., & Laberge Lebel, L. (2022). A model of multi-die thermoplastic pultrusion. Composites Part B-Engineering, 247, 110319 (12 pages).
  - Chavez-Gomez, P., Pelzmann, T., Hall, D. R., Chilian, C., Laberge Lebel, L., & Robert, É. (2022). Carbon fiber damage evolution under flame attack and the role of impurities. Fire and Materials, 47(2), 226-240.
  - Chávez-Gómez, P., Pelzmann, T., Zahlawi, J., Laberge Lebel, L., & Robert, É. (2022). Carbon fiber oxidation in combustion environments—Effect of flame chemistry and load on bundle failure. Materials Today Communications, 31, 103560.
  - Absi, C., Alsinani, N., & Laberge Lebel, L. (2022). Carbon fiber reinforced poly(ether ether ketone) rivets for fastening composite structures. Composite Structures, 280, 114877 (13 pages).
  - Alsinani, N., & Laberge Lebel, L. (2022). Effect of Flax/PP pellets' morphology on the mechanical properties of injection-molded parts. Journal of Thermoplastic Composite Materials, 36(7), 3041-3065.
  - Alsinani, N., & Laberge Lebel, L. (2022). Effect of high pulling speeds on the morphologies of pultrudates in a thermoplastic pultrusion process. Journal of Thermoplastic Composite Materials, 36(9), 3566-3584.
- 2021
  - Gondran, M., Abdin, Y., Gendreau, Y., Khameneifar, F., & Laberge Lebel, L. (2021). Automated braiding of non-axisymmetric structures using an iterative inverse solution with angle control. Composites Part A: Applied Science and Manufacturing, 143, 13 pages.
  - Assi, P., Achiche, S., & Laberge Lebel, L. (2021). 3D printing process for textile composites. CIRP Journal of Manufacturing Science and Technology, 32, 507-516.
  - Alsinani, N., Ghaedsharaf, M., & Laberge Lebel, L. (2021). Effect of cooling temperature on deconsolidation and pulling forces in a thermoplastic pultrusion process. Composites Part B: Engineering, 219, 15 pages.
  - Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (2021). Fiber-level numerical simulation of biaxial braids for mesoscopic morphology prediction validated by X-ray computed tomography scan. Composites Part B: Engineering, 218, 11 pages.
  - Burgarella, B., Assi, P., & Laberge Lebel, L. (2021). Multi-scale finite elements analysis of braids and bundles of filaments using embedded elements. Finite Elements in Analysis and Design, 197, 103631 (8 pages).
  - Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (2021). Multiscale numerical simulation of the forming process of biaxial braids during thermoplastic braid-trusion: Predicting 3D and internal geometry and fiber orientation distribution. Composites Part A: Applied Science and Manufacturing, 150, 15 pages.
- 2020
  - Rohart, V., Laberge Lebel, L., & Dubé, M. (2020). Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. Composites Part B: Engineering, 198, 10 pages.
  - Rohart, V., Dubé, M., & Laberge Lebel, L. (2020). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37.
  - Delorme, R., Diehl, P., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2020). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamic framework. Journal of Peridynamics and Nonlocal Modeling, 2(2), 111-135.
  - Fortier, V., Brunel, J.- E., & Laberge Lebel, L. (2020). Fastening composite structures using braided thermoplastic composite rivets. Journal of Composite Materials, 54(6), 801-812.
  - Rohart, V., Laberge Lebel, L., & Dubé, M. (2020). Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites. Composites Part B: Engineering, 188, 12 pages.
  - Rohart, V., Laberge Lebel, L., & Dubé, M. (2020). Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints. Journal of Reinforced Plastics and Composites, 39(21-22), 837-851.
- 2019
  - Lapointe, F., & Laberge Lebel, L. (2019). Fiber damage and impregnation during multi-die vacuum assisted pultrusion of carbon/PEEK hybrid yarns. Polymer Composites, 40(S2), E1015-E1028.
  - Rohart, V., Dubé, M., & Laberge Lebel, L. (2019). Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37.
  - Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-material direct ink writing (DIW) for complex 3D metallic structures with removable supports. ACS Applied Materials & Interfaces, 11(8), 8499-8506.
- 2018
  - Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269.
  - Pouliot Laforte, L., & Laberge Lebel, L. (2018). Thermal analysis and degradation of properties in carbon fiber/epoxy laminate riveting at high temperatures. Polymer Testing, 67, 205-212.
  - Benkaddour, A., Lebrun, G., & Laberge Lebel, L. (2018). Thermostamping of [0/90]ₙ carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation. Polymer Composites, 39(9), 3341-3352.
- 2017
  - Monnot, P., Lévesque, J., & Laberge Lebel, L. (2017). Automated braiding of a complex aircraft fuselage frame using a non-circular braiding model. Composites Part A: Applied Science and Manufacturing, 102, 48-63.
  - Delorme, R., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2017). Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity. Mechanics of Time-Dependent Materials, 21(4), 549-575.
  - Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455.
- 2016
  - Renaud, J., Vernet, N., Ruiz, E., & Laberge Lebel, L. (2016). Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature. Composites Part A: Applied Science and Manufacturing, 86, 87-96.
  - Jamin, T., Dubé, M., & Laberge Lebel, L. (2016). Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens. Journal of Composite Materials, 50(9), 1213-1225.
- 2014
  - Dermanaki-Farahani, R., Laberge Lebel, L., & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments (85).
  - Farahani, R. D., Laberge Lebel, L., & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5), 055020 (12 pages).
- 2013
  - Laberge Lebel, L., & Trudeau, P. (2013). Preforming of a fuselage C-shaped frame manufactured by resin transfer molding. SAE International Journal of Aerospace, 6(2), 508-512.
- 2012
  - Laberge Lebel, L., & Nakai, A. (2012). Design and manufacturing of an L-shaped thermoplastic composite beam by braid-trusion. Composites Part A: Applied Science and Manufacturing, 43(10), 1717-1729.
  - Aïssa, B., Therriault, D., Farahani, R. D., Laberge Lebel, L., & El Khakani, M. A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11), 115705 (8 pages).
- 2011
  - Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L., & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8).
- 2010
  - Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), 518-524.
  - Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2010). Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Advanced Materials, 22(5), 592-596.
- 2009
  - Laberge Lebel, L., Aïssa, B., Paez, O. A., El Khakani, M. A., & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12), 125009.
- 2007
  - Laberge Lebel, L., & Hoa, S. V. (2007). Manufacturing of braided thermoplastic composites with carbon/nylon commingled fibers. Journal of Composite Materials, 41(9), 1101-1121.
Communications de conférence (65)
- 2025
  - Popiolek, A., Duda, D., Laberge Lebel, L., & Adriano Fagali de Souza, A. (novembre 2025). Analysis of Straight and Helical Baffle Flow in Injection Molding Cooling Channels via 3D-Printed Model and Computational Simulation [Communication écrite]. 28th ABCM International Congress of Mechanical Engineering (COBEM 2025), Curitiba, PR, Brazil.
- 2024
  - Giordano, T., Porto, D., Fagali de Souza, A., Popiolek, A., & Laberge Lebel, L. (juillet 2024). Data Acquisition in Injection molding process: Pressure and Temperature [Communication écrite]. XII Congresso Nacional de Engenharia Mecânica (CONEM 2024), Natal, Rio Grande do Norte, Brazil.
  - Popiolek, A., Fagali de Souza, A., & Laberge Lebel, L. (juillet 2024). Development of conformal cooling for improvement of injected parts dimensional [Communication écrite]. XII Congresso Nacional de Engenharia Mecânica (CONEM 2024), Natal, Rio Grande do Norte, Brazil.
- 2023
  - El-Jakl, M., & Laberge Lebel, L. (juillet 2023). Braid-trusion of hollow glass fibre/polyethylene terephthalate thermoplastic composites [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom (10 pages).
  - Vazeille, F., & Laberge Lebel, L. (juillet 2023). Envelop enrichment method to apply periodic boundary conditions on non-periodic unit cells [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom (9 pages).
  - Chavez-Gomez, P., Robert, E., & Laberge Lebel, L. (juillet 2023). Tensile strength evaluation of carbon fiber bundles using capstan grips and digital image correlation [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom (9 pages).
- 2022
  - Talos, C. S., Achiche, S., & Laberge Lebel, L. (septembre 2022). Automated braiding carriers for industry 4.0 [Présentation]. Dans Texcomp 2022, Kyoto, Japan.
  - Talos, C. S., Achiche, S., & Laberge Lebel, L. (juillet 2022). Characterization of the yarn tension evolution generated by braiding carriers [Présentation]. Dans Canadian-International Conference on Composites (CANCOM 2022), Fredericton/Moncton, N.-B..
  - Assi, P., Achiche, S., & Laberge Lebel, L. (septembre 2022). Horngear and carrier design for 3D-braiding of tailorable composite preforms [Présentation]. Dans Texcomp 2022, Kyoto, Japan.
- 2021
  - Absi, C., Alsinani, N. A., & Laberge Lebel, L. (mai 2021). Fastening aerospace structures with carbon fiber/poly ether ether ketone composite rivets [Présentation]. Dans SAMPE 2021.
  - Laberge Lebel, L., Hyodo, K., Ohishi, M., & Nakai, A. (décembre 2021). Pultrusion of Thermoplastic Composites using Partially Consolidated Yarns [Résumé]. 17th Japan International Sampe Symposium and Exhibition, Tokyo, Japan.
- 2019
  - Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (août 2019). Carbon fiber/PEEK rivets for fastening composites structures [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia.
  - Gondran, M., Laberge Lebel, L., & Khameneifar, F. (décembre 2019). Development of an iterative braiding model with angle control and thickness measurement [Affiche]. Colloque Annuel du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance CREPEC, Québec, Québec.
  - Belanger, M.-C., Forcier, P., Gendreau, Y., Bujold, A., Pesant, S., Page, S., & Laberge Lebel, L. (septembre 2019). Effect of tailored fiber placement threads on carbon/epoxy composite impact resistance [Communication écrite]. 6th Annual Composites and Advanced Materials Expo (CAMX 2019), Anaheim, CA, USA.
  - Chávez, P., Pelzmann, T., Robert, É., & Laberge Lebel, L. (janvier 2019). Evaluation of the fire resistance of protected carbon/epoxy laminates in small-scale experiments [Communication écrite]. AIAA Scitech Forum, San Diego, California.
  - Chávez Gómez, P., Pelzmann, T., Langot, J., Robert, É., & Laberge Lebel, L. (août 2019). Fuel effect on the tensile strength evolution of carbon fibers under direct flame attack [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia.
  - Lessard, F., Boanta, C., Dubé, M., Laberge Lebel, L., & Robert, É. (août 2019). Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behavior of polymer matrix composites [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia.
  - Rohart, V., Dubé, M., & Laberge Lebel, L. (août 2019). Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia.
  - Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (mai 2019). Joining Composite Using Carbon Fiber/PEEK Rivets [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec.
  - Burgarella, B., & Laberge Lebel, L. (juillet 2019). Multi-scale finite element analysis of braids and bundles of filaments using embedded elements [Présentation]. Dans 11th Canadian-International Conference on Composites, Kelona, Colombie-Britannique.
  - Ghaedsharaf, M., & Laberge Lebel, L. (avril 2019). The effect of braid angle on the void content and fiber misorientation of thermoplastic Diamond, Regular and Hercules braided rod manufacturing using braid-trusion [Présentation]. Dans 4th International Symposium on Automated Composites Manufacturing, Montréal, Québec.
  - Ghaedsharaf, M., & Laberge Lebel, L. (mai 2019). The effect of braid pattern on the pulling force of thermoplastic braid-trusion [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec.
  - Alsinani, N., & Laberge Lebel, L. (septembre 2019). Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation [Communication écrite]. 19th Annual SPE Automotive Composites Conference & Exhibition (ACCE 2019), Novi, Michigan (10 pages).
- 2018
  - Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (mai 2018). 3D printing of metallic structures from a green ink [Communication écrite]. CSME International Congress, Toronto, Ontario, Canada.
  - Alsinani, N. A., & Laberge Lebel, L. (septembre 2018). Effect of length variation of flax/polypropylene pellets produced by multi-die pultrusion on the quality of injection molded product [Communication écrite]. 18th Annual Society for Plastics Engineers Automotive Composites Conference & Exhibition, Novi, Michigan.
  - Gendreau, Y., Bélanger, M.-C., Lévesque, J., & Laberge Lebel, L. (juillet 2018). Effect of tailored fiber placement parameters on carbon fiber/epoxy composite [Communication écrite]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan.
  - Rohart, V., Dube, M., & Laberge Lebel, L. (mai 2018). Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints [Communication écrite]. Conference and Exhibition (SAMPE 2018), Long Beach, CA.
  - Fortier, V., Lessard, F., & Laberge Lebel, L. (juillet 2018). Fastening composite structures using carbon fiber/polyetherimide rivets [Communication écrite]. 12th Canada-Japan Workshop on Composites, Design, Manufacturing and Applications of Composites (DMAC 2018), Takayama, Gifu, Japan.
  - Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (juin 2018). Thermoplastic Composite Rod Manufacturing using Biaxial Braid-Trusion [Communication écrite]. 18th European Conference on Composite Materials (ECCM 2018), Athens, Greece (8 pages).
  - Burgarella, B., Marcoux, A., & Laberge Lebel, L. (juillet 2018). Understanding the damage evolution of dry carbon fibre yarns in contact with pulleys during textile processing [Présentation]. Dans 13th World Congress in Computational Mechanics, New York, N. Y..
- 2017
  - Monnot, P., Lévesque, J., & Laberge Lebel, L. (avril 2017). Automated braiding of non-axisymmetric structures [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec.
  - Fortier, V., Brunel, J.-E., & Laberge Lebel, L. (juillet 2017). Automated manufacturing of thermoplastic composite rivets [Communication écrite]. 10th Canadian-International Conference on Composites, Ottawa, Ont..
  - Monnot, P., Levesque, J., Dubé, R., & Laberge Lebel, L. (juillet 2017). Complex aircraft fuselage frame manufacturing using automated braiding and infusion [Communication écrite]. 10th Canadian-International Conference on Composites, Ottawa, Ont..
  - Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (juillet 2017). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.
  - Ghaedsharaf, M., Brunel, J.-E., & Laberge Lebel, L. (juillet 2017). Fiber-level bi-axial braid simulation for braid-trusion [Communication écrite]. 10th Canadian International Conference on Composites (CANCOM 2017), Ottawa, Ontario.
  - Brazeau-Séguin, J., Lévesque, J., & Laberge Lebel, L. (avril 2017). Relating weaving parameters and 3D woven fabric design with a geometrical modelling approach [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec.
  - Pouliot Laforte, L., & Laberge Lebel, L. (avril 2017). Study of bi-experiment inverse method for thermal characterization of fiber-reinforced composites [Communication écrite]. 3rd International Symposium on Automated Composites Manufacturing (ACM 2017), Montréal, Québec.
  - Laberge Lebel, L. (juillet 2017). Thermoplastic composite fasteners for composite structures [Communication écrite]. 3rd Joint Turkey-Japan Workshop on Polymeric Composite Materials and 22nd Society for Automotive Composites Symposium, Kyoto, Japan.
- 2016
  - Monnot, P., Levesque, J., Vermeersch, O., & Laberge Lebel, L. (mai 2016). Automated braiding of dry preforms for aerospace structural components [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states.
  - Lapointe, F. L., Oswald, A., Nakai, A., & Laberge Lebel, L. (juin 2016). Manufacturing of carbon/polyamide beam by vacuum assisted pultrusion [Communication écrite]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany.
  - Lapointe, F., Oswald, A., & Laberge Lebel, L. (août 2016). Manufacturing of thermoplastic composite rods using vacuum assisted pultrusion [Communication écrite]. Canada-Japan-Vietnam Workshop on Composites, Ho Chi Minh City, Vietnam.
  - Oswald, A., Lapointe, F. L., & Laberge Lebel, L. (juin 2016). Multi-die, vacuum assisted pultrusion of flax/PLA thermoplastic biocomposite rods [Communication écrite]. 17th European Conference on Composite Materials (ECCM 2016), Munich, Germany.
  - Renaud, J., Ruiz, E., & Laberge Lebel, L. (mai 2016). Preforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process [Communication écrite]. SAMPE Long Beach 2016 Conference and Exhibition, Long Beach, CA, United states.
  - Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (août 2016). Three-dimensional direct-write printing of metallic microstructures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.
- 2015
  - Laberge Lebel, L. (avril 2015). Behavior of fiber preforms during composite manufacturing [Communication écrite]. Japanese Society for Automotive Composite Conference Symposium, Kyoto, Japan.
- 2014
  - Laberge Lebel, L., Lachance, J. P., Brunel, J. E., Jamin, T., & Dube, M. (août 2014). Modeling of Out-of-Plane Stresses in C/PPS Composite L-Shape Brackets [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada.
  - Kaganj, A. B., Laberge Lebel, L., Hojjati, M., & Hoa, S. V. (août 2014). Stamp forming of S-shape thermoplastic composites [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada (8 pages).
  - Jamin, T., Dubé, M., & Laberge Lebel, L. (juin 2014). Stamp forming of thermoplastic composites: Effect of radius and thickness on part quality [Communication écrite]. 16th European Conference on Composites Materials (ECCM16), Seville, Spain (8 pages).
  - Jamin, T., Dubé, M., Kaganj, A. B., Hojjati, M., Hoa, S. V., Nguyen, H.-D., Pham, T., Laberge Lebel, L., & Héroux, S. (avril 2014). Thermoformage des composites thermoplastiques, Projet Comp-512 [Communication écrite]. Forum - Consortium de recherche et d'innovation en aérospatiale au Québec (CRIAQ), Montréal, Québec.
- 2010
  - Laberge Lebel, L., Tanaka, Y., & Nakai, A. (septembre 2010). Braid-trusion of jute/polylactic acid composites [Communication écrite]. American Society for Composites 25th Annual Technical Conference, Dayton, USA.
  - Laberge Lebel, L., Torun, A. R., Tanaka, Y., Ohtani, A., & Nakai, A. (juillet 2010). Consolidation quality and mechanical properties of thermoplastic composite manufactured by pull-braiding [Communication écrite]. 8th Joint Canada-Japan Workshop on Composites, Montréal, Québec.
  - Laberge Lebel, L., Torun, A. R., Tanaka, Y., Ohtani, A., & Nakai, A. (mars 2010). Effect of die filling ratio on braided thermoplastic composite tube consolidation quality and mechanical properties manufactured by pultrusion [Communication écrite]. 1st Japan Conference on Composite Materials (JCCM-1), Kyoto, Japon.
  - Hatano, D., Tanaka, Y., Laberge Lebel, L., Ohtani, A., & Nakai, A. (octobre 2010). Pultrusion system of continuous fiber reinforced thermoplastic composite with braiding technique [Communication écrite]. 10th International Conference on Textile Composites - TEXCOMP 10: Recent Advances in Textile Composites, Lille, France.
- 2009
  - Tanaka, Y., Laberge Lebel, L., Ohtani, A., Nakai, A., & Hamada, H. (novembre 2009). Pultrusion of continuous fiber reinforced thermoplastic composite tubes with braiding technique [Communication écrite]. JISSE-11 (SAMPE Japan), Tokyo, Japan.
  - Laberge Lebel, L., Aissa, B., Khakani, M. A. E., & Therriault, D. (avril 2009). Ultraviolet-assisted direct-write fabrication of three-dimensional microstructures [Communication écrite]. MRS Spring Meeting, Boston, MA, USA.
- 2008
  - Laberge Lebel, L., & Leconte, D. (mars 2008). Direct writing of freeform 3D microstructures [Communication écrite]. World Best Technology Showcase 2008, Arlington, TX, USA.
  - Aïssa, B., Laberge Lebel, L., Therriault, D., & El Khakani, M. A. (mai 2008). Synthèse contrôlée des nanotubes de carbone monoparois par l'approche plasma/laser pour l'élaboration de nanocomposites NTC-Polymère [Communication écrite]. 76e Congrès de l'ACFAS, Québec, QC, Canada.
- 2007
  - Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (novembre 2007). 3D reinforced SWCNT-polymer nanocomposite beams by means of microfluidic infiltration [Communication écrite]. MRS Fall Meeting, Boston, Ma..
  - Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (octobre 2007). Three-dimensional (3D) microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Communication écrite]. Polymer nanocomposites 2007, Montréal, Québec.
  - Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (décembre 2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach [Communication écrite]. Crepec 2007, Montréal, Québec.
  - Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (octobre 2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Communication écrite]. Simha Symposium on Polymer Physics and Polymer Nanocomposites, Montréal, Québec.
- 2006
  - Laberge Lebel, L., & Hoa, S. V. (avril 2006). Processing and characterization of braided commingled carbon/nylon thermoplastic composites [Communication écrite]. Creating New Opportunities for the World Economy, SAMPE 2006, Long Beach, California, USA.
- 2004
  - Laberge Lebel, L., Salek, H., Frederic, G., Hoa, S. V., Nakai, A., & Hamada, H. (septembre 2004). Processing and properties of carbon/nylon thermoplastic composites made by commingled tows and micro-braided tows [Communication écrite]. 5th Joint Canada-Japan Workshop on Composites, Yonezawa, Yamagata, Japan.
- 2003
  - Laberge Lebel, L., & Hoa, S. V. (janvier 2003). Développement d'éléments structuraux à faible coût en composites thermoplastiques pour l'aérospatiale [Communication écrite]. Lancement officiel du CRIAQ, Montréal, Québec.
  - Laberge Lebel, L., & Hoa, S. V. (août 2003). Thermoplastic composite wing [Communication écrite]. CANCOM 2003, Ottawa, ON, Canada.
Livres (1)
- 2018
  - Laberge Lebel, L., & Nakai, A. (édit.) (2018). Design, manufacturing and applications of composites : proceedings of the 12th Canada-Japan Workshop on Composites, July 4-7, 2018, Takayama, Gifu, Japan.
Chapitres de livre (2)
- 2013
  - Goda, K., Nakamura, R., Nakai, A., & Laberge Lebel, L. (2013). Textile biocomposites. Dans Polymer Composites, Volume 3, Biocomposites (p. 331-360).
- 2011
  - Laberge Lebel, L., & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. Dans Boreddy, R. (édit.), Advances in Diverse Industrial Applications of Nanocomposites (p. 409-428).
Brevets (14)
- 2023
  - Laberge Lebel, L., Monnot, P., Oswald, A., & Lapointe, F. (2023). Pultrusion System. (Brevet no EP3475069 B1).
- 2022
  - Laberge Lebel, L., Assi, P., Stefan Talos, C., Villeneuve, G., Chabot, O., Bousquet, P., & Delisle, V. (2022). Braiding machines and carriers for braiding machines. (Demande de brevet no US20220106716).
  - Laberge Lebel, L., Chavez Gomez, P. J., Richer, A., Robert, É., & Hamp, J. (2022). Fire protection structure. [Structure de protection contre les incendies]. (Demande de brevet no US20220282672).
- 2021
  - Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. A. (2021). Metal 3D Printing Method and Metallic 3D Printed Materials. (Brevet no US11198178 B2).
  - Laberge Lebel, L., Monnot, P., Oswald, A., & Lapointe, F. (2021). Pultruded beam reinforced with natural fibers, pultrusion system and method therefor. (Brevet no US10913220).
- 2020
  - Trudeau, P., Laberge Lebel, L., Hoste, D., & Landry, A. (2020). Composite rivet blank and installation thereof. (Demande de brevet no US20200171758).
  - Laberge Lebel, L., & Alsinani, N. A. (2020). Pultrusion system with cooling stage and method therefor. (Demande de brevet no WO2020237381).
- 2019
  - Laberge Lebel, L., Dragutescu, M., Trudeau, P., Normandin, G., & Rifay, M. (2019). Device and method for positioning a ply of material of a composite component along an arcuate surface. (Demande de brevet no US20190329507).
  - Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Demande de brevet no US20190054536).
- 2018
  - Laberge Lebel, L., & Fortier, V. (2018). Apparatus and methods for installing composite rivets. (Brevet no WO3592538).
- 2017
  - Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials. (Demande de brevet no CA2976782).
- 2015
  - Trudeau, P., Laberge Lebel, L., Hoste, D., & Landry, A. (2015). Composite rivet blank and installation thereof. (Brevet no US10589468).
  - Laberge Lebel, L., Dragutescu, M., Trudeau, P., Normandin, G., & Rifay, M. (2015). Device and method for positioning a ply of material of a composite component along an arcuate surface. (Brevet no US10391721).
- 2009
  - Laberge Lebel, L., Therriault, D., El-Khakani, M. A., & Aissa, B. (2009). Methods for preparing freeform three-dimensional structures. (Demande de brevet no US20090101278).
Thèses (2)
- 2009
  - Laberge Lebel, L. (2009). Fabrication de structures tridimensionnelles de nanocomposites polymères chargés de nanotubes de carbone à simple paroi [Thèse de doctorat, École Polytechnique de Montréal].
- 2005
  - Laberge Lebel, L. (2005). Manufacturing of braided thermoplastic composites with commingled fibers [Mémoire de maîtrise, Université Concordia].