Répertoire des expertises

Vous êtes ici

Publications par type

Trier par date de publication
Retour à la fiche d'expertise
Article de revue (145) Communication de conférence (39) Livre Chapitre de livre (3) Brevet (6) Rapport Thèse

Jolanta-Ewa Sapieha (193)

  • Articles de revue (145)
    • 2020
      • Article de revue
        Wu, Y., Schmitt, T., Bousser, E., Vernhes, L., Khelfaoui, F., Perez, G., Klemberg-Sapieha, J.-E. & Brochu, M. (2020). Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers. Surface and Coatings Technology, 390, 11 pages. Tiré de https://doi.org/10.1016/j.surfcoat.2020.125611
      • Article de revue
        Beaini, R., Baloukas, B., Loquai, S., Klemberg-Sapieha, J.E. & Martinu, L. (2020). Thermochromic VO2-based smart radiator devices with ultralow refractive index cavities for increased performance. Solar Energy Materials and Solar Cells, 205, 7 pages. Tiré de https://doi.org/10.1016/j.solmat.2019.110260
    • 2019
      • Article de revue
        Rajesh, P.S.M., Delaroa, C., Gagne, M., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212. Tiré de https://doi.org/10.1016/j.mtcomm.2018.11.002
      • Article de revue
        Alidokht, S.A., Lengaigne, J., Klemberg-Sapieha, J.E., Yue, S. & Chromik, R.R. (2019). Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior. Journal of Materials Engineering and Performance, 28(3), 1532-1543. Tiré de https://doi.org/10.1007/s11665-019-03956-w
      • Article de revue
        Imbriglio, S.I., Munagala, V.N.V., Schmitt, T., Gauvin, R., Klemberg-Sapieha, J.E. & Chromik, R.R. (2019). Failure dynamics of spherical and irregular shaped Ti splats deposited on sapphire by cold spray. Surface Topography-Metrology and Properties, 7(4), 13 pages. Tiré de https://doi.org/10.1088/2051-672X/ab3efc
      • Article de revue
        Kilicaslan, A., Zabeida, O., Bousser, E., Schmitt, T., Klemberg-Sapieha, J.E. & Martinu, L. (2019). Hard titanium nitride coating deposition inside narrow tubes using pulsed DC PECVD processes. Surface and Coatings Technology, 377, 10 pages. Tiré de https://doi.org/10.1016/j.surfcoat.2019.124894
      • Article de revue
        Lengaigne, J., Bousser, E., Brown, S., Batory, D., Dolatabadi, A., Martinu, L. & Klemberg-Sapieha, J.E. (2019). Impact dynamics of supercooled microdroplets on water-repellent coatings. Thin Solid Films, 688, 6 pages. Tiré de https://doi.org/10.1016/j.tsf.2019.05.028
      • Article de revue
        Qian, J., Schmitt, T., Baloukas, B., Kosik-Williams, C.A., Price, J.J., Null, E.L., Paulson, C.A., Klemberg-Sapieha, J. & Martinu, L. (2019). In situ tribometry with real-time imaging for assessing durability and wear mechanisms of easy-to-clean coatings on glass for touchscreen substrates. Displays, 57, 47-54. Tiré de https://doi.org/10.1016/j.displa.2019.04.001
      • Article de revue
        Herrera-Jimenez, E.J., Raveh, A., Schmitt, T., Bousser, E., Klemberg-Sapieha, J.E. & Martinu, L. (2019). Solid solution hardening in nanolaminate ZrN-TiN coatings with enhanced wear resistance. Thin Solid Films, 688, 6 pages. Tiré de https://doi.org/10.1016/j.tsf.2019.137431
      • Article de revue
        Pougoum, F., Qian, J., Martinu, L., Klemberg-Sapieha, J., Zhou, Z., Li, K.Y., Savoie, S., Lacasse, R., Potvin, E. & Schulz, R. (2019). Study of corrosion and tribocorrosion of Fe3Al-based duplex PVD/HVOF coatings against alumina in NaCl solution. Surface and Coatings Technology, 357, 774-783. Tiré de https://doi.org/10.1016/j.surfcoat.2018.10.060
      • Article de revue
        Wu, Y., Bousser, E., Schmitt, T., Tarfa, N., Khelfaoui, F., Rene, R., Klemberg-Sapieha, J.-E. & Brochu, M. (2019). Thermal stability of a Stellite/steel hardfacing interface during long-term aging. Materials Characterization, 154, 181-192. Tiré de https://doi.org/10.1016/j.matchar.2019.05.025
    • 2018
      • Article de revue
        Habibzadeh, S., Zabeida, O., Argoitia, A., Sargent, R., Klemberg-Sapieha, J., Chaouki, J. & Martinu, L. (2018). Conformal multilayer photocatalytic thin films on fine particles by atmospheric pressure fluidized bed chemical vapor deposition. Industrial & Engineering Chemistry Research, 57(31), 10345-10353. Tiré de https://doi.org/10.1021/acs.iecr.8b00756
      • Article de revue
        Vajente, G., Birney, R., Ananyeva, A., Angelova, S., Asselin, R., Baloukas, B., Bassiri, R., Billingsley, G., Fejer, M.M., Gibson, D., Godbout, L.J., Gustafson, E., Heptonstall, A., Hough, J., MacFoy, S., Markosyan, A., Martins, I.W., Martinu, L., Murray, P.G., Penn, S., Roorda, S., Rowan, S., Schiettekatte, F., Shink, R., Torrie, C., Vine, D., Reid, S. & Adhikari, R.X. (2018). Effect of elevated substrate temperature deposition on the mechanical losses in tantala thin film coatings. Classical and Quantum Gravity, 35(7), 18 pages. Tiré de https://doi.org/10.1088/1361-6382/aaad7c
      • Article de revue
        Blanchard, F., Baloukas, B. & Martinu, L. (2018). Highly durable electrochromic tungsten oxide thin films prepared by high rate bias-enhanced sputter deposition. Applied Materials Today, 12, 235-243. Tiré de https://doi.org/10.1016/j.apmt.2018.05.001
      • Article de revue
        Cauchy, X., Sapieha, J.-E. & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12). Tiré de https://doi.org/10.1002/adem.201800541
      • Article de revue
        Pougoum, F., Qian, J., Laberge, M., Martinu, L., Klemberg-Sapieha, J., Zhou, Z., Li, K.Y., Savoie, S. & Schulz, R. (2018). Investigation of Fe3Al-based PVD/HVOF duplex coatings to protect stainless steel from sliding wear against alumina. Surface and Coatings Technology, 350, 699-711. Tiré de https://doi.org/10.1016/j.surfcoat.2018.07.070
      • Article de revue
        Che, H., Gagné, M., Rajesh, P.S.M., Sapieha, J.E., Sirois, F., Therriault, D. & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211. Tiré de https://doi.org/10.1007/s11665-018-3609-y
      • Article de revue
        Laberge, M., Bousser, E., Schmitt, J., Koshigan, M., Schmitt, T., Khelfaoui, F., Isbitsky, S., Vernhes, L. & Klemberg-Sapieha, J.E. (2018). Predicting the Load-Carrying Capacity and Wear Resistance of Duplex-Coated Low-Strength Alloys for Severe Service Ball Valves. Journal of Thermal Spray Technology, 27(7), 1177-1186. Tiré de https://doi.org/10.1007/s11666-018-0752-9
      • Article de revue
        Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G.B., Barthel, E., Doll, G.L., Murray, C.E., Stoessel, C.H. & Martinu, L. (2018). Review article: stress in thin films and coatings: Current status, challenges, and prospects. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 36(2). Tiré de https://doi.org/10.1116/1.5011790
      • Article de revue
        Baloukas, B., Loquai, S. & Martinu, L. (2018). VO2-based thermally active low emissivity coatings. Solar Energy Materials and Solar Cells, 183(15), 25-33. Tiré de https://doi.org/10.1016/j.solmat.2018.03.048
    • 2017
      • Article de revue
        Rimpault, X., Chatelain, J.-F., Klemberg-Sapieha, J.E. & Balazinski, M. (2017). Burr height monitoring while drilling CFRP/titanium/aluminium stacks. Mechanics and Industry, 18(1), 11 pages. Tiré de https://doi.org/10.1051/meca/2015073
      • Article de revue
        Lavigne, S., Pougoum, F., Savoie, S., Martinu, L., Klemberg-Sapieha, J.E. & Schulz, R. (2017). Cavitation erosion behavior of HVOF CaviTec coatings. Wear, 386-387, 90-98. Tiré de https://doi.org/10.1016/j.wear.2017.06.003
      • Article de revue
        Baloukas, B., Arvizu, M.A., Wen, R.-T., Niklasson, G.A., Granqvist, C.G., Vernhes, R., Klemberg-Sapieha, J.E. & Martinu, L. (2017). Galvanostatic Rejuvenation of Electrochromic WO3 Thin Films : Ion Trapping and Detrapping Observed by Optical Measurements and by Time-of-Flight Secondary Ion Mass Spectrometry. ACS Applied Materials & Interfaces, 9(20), 16995-17001. Tiré de https://doi.org/10.1021/acsami.7b01260
      • Article de revue
        Kohout, J., Qian, J., Schmitt, T., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J. & Martinu, L. (2017). Hard AlN films prepared by low duty cycle magnetron sputtering and by other deposition techniques. Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 35(6), 9 pages. Tiré de https://doi.org/10.1116/1.4999460
      • Article de revue
        Loquai, S., Baloukas, B., Klemberg-Sapieha, J.E. & Martinu, L. (2017). HiPIMS-deposited thermochromic VO2films with high environmental stability. Solar Energy Materials and Solar Cells, 160, 217-224. Tiré de https://doi.org/10.1016/j.solmat.2016.10.038
      • Article de revue
        Poirié, T., Schmitt, T., Bousser, E., Vernhes, R., Martinu, L. & Klemberg-Sapieha, J.E. (2017). Hybrid organic/inorganic nanolaminate structures with enhanced tribo-mechanical properties for optical applications. Surface and Coatings Technology, 315, 399-407. Tiré de https://doi.org/10.1016/j.surfcoat.2017.02.056
      • Article de revue
        Poirié, T., Schmitt, T., Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2017). Influence of internal stress in optical thin films on their failure modes assessed by in situ real-time scratch analysis. Tribology International, 109, 355-366. Tiré de https://doi.org/10.1016/j.triboint.2016.12.053
      • Article de revue
        Batory, D., Szymanski, W., Panjan, M., Zabeida, O. & Klemberg-Sapieha, J.E. (2017). Plasma nitriding of Ti6Al4V alloy for improved water erosion resistance. Wear, 374-375, 120-127. Tiré de https://doi.org/10.1016/j.wear.2017.01.041
      • Article de revue
        Benkahoul, M., Zayed, M.K., Sandu, C.S., Martinu, L. & Klemberg-Sapieha, J.E. (2017). Structural, tribo-mechanical, and thermal properties of NbAlN coatings with various Al contents deposited by DC reactive magnetron sputtering. Surface and Coatings Technology, 331(Supplement C), 172-178. Tiré de https://doi.org/10.1016/j.surfcoat.2017.10.038
      • Article de revue
        Cauchy, X., Klemberg-Sapieha, J.E. & Therriault, D. (2017). Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Applied Materials & Interfaces, 9(34), 29010-29020. Tiré de https://doi.org/10.1021/acsami.7b06526
      • Article de revue
        Rimpault, X., Chatelain, J.F., Klemberg-Sapieha, J.E. & Balazinski, M. (2017). Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals. CIRP Journal of Manufacturing Science and Technology, 16, 72-80. Tiré de https://doi.org/10.1016/j.cirpj.2016.06.003
      • Article de revue
        Pougoum, F., Schmitt, T., Martinu, L., Klemberg-Sapieha, J.-E., Savoie, S. & Schulz, R. (2017). Wear behavior of Fe₃Al-TiN-TiB₂ HVOF coatings: A comparative study between in situ and ex situ powder processing routes. Ceramics International, 43(11), 8040-8050. Tiré de https://doi.org/10.1016/j.ceramint.2017.03.122
    • 2016
      • Article de revue
        Taillon, G., Pougoum, F., Lavigne, S., Ton-That, L., Schulz, R., Bousser, E., Savoie, S., Martinu, L. & Klemberg-Sapieha, J.-E. (2016). Cavitation erosion mechanisms in stainless steels and in composite metalceramic HVOF coatings. Wear, 364-365, 201-210. Tiré de https://doi.org/10.1016/j.wear.2016.07.015
      • Article de revue
        Pougoum, F., Martinu, L., Desjardins, P., Klemberg-Sapieha, J., Gaudet, S., Savoie, S. & Schulz, R. (2016). Effect of high-energy ball-milling on the characteristics of Fe₃Al-based HVOF coatings containing boride and nitride phases. Wear, 358-359, 97-108. Tiré de https://doi.org/10.1016/j.wear.2016.04.001
      • Article de revue
        Farahani, R.D., Gagne, M., Klemberg-Sapieha, J.E. & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Tiré de https://doi.org/10.1002/adem.201500544
      • Article de revue
        Loquai, S., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2016). Flash post-discharge emission in a reactive HiPIMS process. Applied Physics Letters, 109(11), 5 pages. Tiré de https://doi.org/10.1063/1.4962486
      • Article de revue
        Loquai, S., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2016). HiPIMS-deposited thermochromic VO2films on polymeric substrates. Solar Energy Materials and Solar Cells, 155, 60-69. Tiré de https://doi.org/10.1016/j.solmat.2016.04.048
      • Article de revue
        Poirie, T., Schmitt, T., Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2016). In-situ real-time nanowear testing method of optical functional thin films. Tribology International, 95, 147-155. Tiré de https://doi.org/10.1016/j.triboint.2015.10.020
      • Article de revue
        Vernhes, L., Bekins, C., Lourdel, N., Poirier, D., Lima, R.S., Li, D. & Klemberg-Sapieha, J.E. (2016). Nanostructured and conventional Cr₂O₃, TiO₂, and TiO₂-Cr₂O₃ thermal-sprayed coatings for metal-seated ball valve applications in hydrometallurgy. Journal of Thermal Spray Technology, 25(5), 1068-1078. Tiré de https://doi.org/10.1007/s11666-016-0405-9
      • Article de revue
        Caron, M., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2016). Stability and performance of organic-inorganic thin films on polymer substrates. Surface and Coatings Technology, 314, 131-138. Tiré de https://doi.org/10.1016/j.surfcoat.2016.10.069
      • Article de revue
        Kohout, J., Bousser, E., Schmitt, T., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J. & Martinu, L. (2016). Stable reactive deposition of amorphous Al₂O₃ films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle. Vacuum, 124, 96-100. Tiré de https://doi.org/10.1016/j.vacuum.2015.11.017
      • Article de revue
        Rimpault, X., Chatelain, J.F., Klemberg-Sapieha, J.E. & Balazinski, M. (2016). Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction. Journal of the International Measurement Confederation, 91, 84-92. Tiré de https://doi.org/10.1016/j.measurement.2016.05.039
      • Article de revue
        Goldbaum, D., Manimuda, P., Kamath, G., Descartes, S., Klemberg-Sapieha, J.E. & Chromik, R.R. (2016). Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates. Surface and Coatings Technology, 291, 264-275. Tiré de https://doi.org/10.1016/j.surfcoat.2016.02.044
      • Article de revue
        Pougoum, F., Martinu, L., Klemberg-Sapieha, J.-E., Savoie, S. & Schulz, R. (2016). Wear properties of Fe₃Al-based HVOF coatings strengthened with in-situ precipitated nitride and boride particles. Surface and Coatings Technology, 307, 109-117. Tiré de https://doi.org/10.1016/j.surfcoat.2016.08.049
    • 2015
      • Article de revue
        Ligot, S., Bousser, E., Cossement, D., Klemberg-Sapieha, J., Viville, P., Dubois, P. & Snyders, R. (2015). Correlation Between Mechanical Properties and Cross-Linking Degree of Ethyl Lactate Plasma Polymer Films. Plasma Processes and Polymers, 12(6), 508-518. Tiré de https://doi.org/10.1002/ppap.201400162
      • Article de revue
        Farahani, R.D., Klemberg-Sapieha, J.E. & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182. Tiré de https://doi.org/10.1016/j.matdes.2015.09.088
      • Article de revue
        Arvizu, M.A., Wen, R.-T., Primetzhofer, D., Klemberg-Sapieha, J.E., Martinu, L., Niklasson, G.A. & Granqvist, C.G. (2015). Galvanostatic Ion Detrapping Rejuvenates Oxide Thin Films. ACS Applied Materials & Interfaces, 7(48), 26387-26390. Tiré de https://doi.org/10.1021/acsami.5b09430
      • Article de revue
        Vernhes, L., Azzi, M., Bousser, E., Klemberg-Sapieha, J.E., Schmitt, T. & Lamarre, J.M. (2015). Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC coating systems. Journal of Thermal Spray Technology, 25(1-2), 346-356. Tiré de https://doi.org/10.1007/s11666-015-0357-5
      • Article de revue
        Camirand, H., Baloukas, B., Klemberg-Sapieha, J.E. & Martinu, L. (2015). In situ spectroscopic ellipsometry of electrochromic amorphous tungsten oxide films. Solar Energy Materials and Solar Cells, 140, 77-85. Tiré de https://doi.org/10.1016/j.solmat.2015.03.028
      • Article de revue
        Qian, J.C., Zhou, Z.F., Zhang, W.J., Li, K.Y., Bello, I., Martinu, L. & Klemberg-Sapieha, J.E. (2015). Microstructure and tribo-mechanical properties of Ti-B-C nanocomposite films prepared by magnetron sputtering. Surface and Coatings Technology, 270, 290-298. Tiré de https://doi.org/10.1016/j.surfcoat.2015.02.043
      • Article de revue
        Panjan, M., Loquai, S., Klemberg-Sapieha, J.E. & Martinu, L. (2015). Non-uniform plasma distribution in dc magnetron sputtering : origin, shape and structuring of spokes. Plasma Sources Science and Technology, 24(6), 16 pages. Tiré de https://doi.org/10.1088/0963-0252/24/6/065010
      • Article de revue
        Qian, J.C., Zhou, Z.F., Yan, C., Li, D.J., Li, K.Y., Descartes, S., Chromik, R., Zhang, W.J., Bello, I., Martinu, L. & Klemberg-Sapieha, J.E. (2015). Tailoring the mechanical and tribological properties of sputtered boron carbide films via the B₁-xCx composition. Surface and Coatings Technology, 267, 2-7. Tiré de https://doi.org/10.1016/j.surfcoat.2014.10.003
    • 2014
      • Article de revue
        Li, D., Guruvenket, S., Szpunar, J.A. & Klemberg-Sapieha, J.E. (2014). Effect of C/Si ratio on the electrochemical behavior of a-SiCx:H coatings on SS301 substrate deposited by PECVD. International Journal of Corrosion, 2014. Tiré de https://doi.org/10.1155/2014/565109
      • Article de revue
        Hála, M., Vernhes, R., Zabeida, O., Bousser, E., Klemberg-Sapieha, J.E., Sargent, R. & Martinu, L. (2014). Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods. Surface and Coatings Technology, 241(C), 33-37. Tiré de https://doi.org/10.1016/j.surfcoat.2013.08.024
      • Article de revue
        Hala, M., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2014). Reactive HiPIMS deposition of SiO2/Ta2O5 optical interference filters. Journal of Applied Physics, 116(21), 213302. Tiré de https://doi.org/10.1063/1.4903285
      • Article de revue
        Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2014). Solid particle erosion mechanisms of protective coatings for aerospace applications. Surface and Coatings Technology, 257, 165-181. Tiré de https://doi.org/10.1016/j.surfcoat.2014.08.037
      • Article de revue
        Fortier, J.-P., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2014). Thermochromic VO2 thin films deposited by HiPIMS. Solar Energy Materials and Solar Cells, 125, 291-296. Tiré de https://doi.org/10.1016/j.solmat.2014.03.007
    • 2013
      • Article de revue
        Vernhes, L., Azzi, M. & Klemberg-Sapieha, J.E. (2013). Alternatives for hard chromium plating: Nanostructured coatings for severe-service valves. Materials Chemistry and Physics, 140(2-3), 522-528. Tiré de https://doi.org/10.1016/j.matchemphys.2013.03.065
      • Article de revue
        Capek, J., Hala, M., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2013). Deposition rate enhancement in HiPIMS without compromising the ionized fraction of the deposition flux. Journal of Physics D: Applied Physics, 46(20), 10 pages. Tiré de https://doi.org/10.1088/0022-3727/46/20/205205
      • Article de revue
        Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2013). Effect of erodent properties on the solid particle erosion mechanisms of brittle materials. Journal of Materials Science, 48(16), 5543-5558. Tiré de https://doi.org/10.1007/s10853-013-7349-y
      • Article de revue
        Yan, C., Jha, S.K., Qian, J.C., Zhou, Z.F., He, B., Ng, T.W., Li, K.Y., Zhang, W.J., Bello, I., Klemberg-Sapieha, J.E. & Martinu, L. (2013). Electronic structure and electrical transport in ternary Al-Mg-B films prepared by magnetron sputtering. Applied Physics Letters, 102(12). Tiré de https://doi.org/10.1063/1.4795298
      • Article de revue
        Vernhes, R., Klemberg-Sapieha, J.E. & Martinu, L. (2013). Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications. Sensors and Actuators B: Chemical, 185, 504-511. Tiré de https://doi.org/10.1016/j.snb.2013.04.064
      • Article de revue
        Vernhes, L., Lee, D.a., Poirier, D., Li, D. & Klemberg-Sapieha, J.E. (2013). HVOF coating case study for power plant process control ball valve application. Journal of Thermal Spray Technology, 22(7), 1184-1192. Tiré de https://doi.org/10.1007/s11666-013-9978-8
      • Article de revue
        Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2013). In situ real-time solid particle erosion testing methodology for hard protective coatings. Surface and Coatings Technology, 237, 313-319. Tiré de https://doi.org/10.1016/j.surfcoat.2013.06.128
      • Article de revue
        Ragusich, A., Taillon, G., Meunier, M., Martinu, L. & Klemberg-Sapieha, J.E. (2013). Selective pulsed laser stripping of TiAlN erosion-resistant coatings: Effect of wavelength and pulse duration. Surface and Coatings Technology, 232, 758-766. Tiré de https://doi.org/10.1016/j.surfcoat.2013.06.092
      • Article de revue
        Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2013). Solid particle erosion mechanisms of hard protective coatings. Surface and Coatings Technology, 235, 383-393. Tiré de https://doi.org/10.1016/j.surfcoat.2013.07.050
      • Article de revue
        Yan, C., Qian, J.C., Ng, T.W., Zhou, Z.F., Li, K.Y., Zhang, W.J., Bello, I., Martinu, L. & Klemberg-Sapieha, J.E. (2013). Sputter Deposition of Hard Quaternary Al-Mg-B-Ti Nanocomposite Films. Surface and Coatings Technology, 232, 535-540. Tiré de https://doi.org/10.1016/j.surfcoat.2013.06.025
    • 2012
      • Article de revue
        Cetinorgu-Goldenberg, E., Klemberg-Sapieha, J.-E. & Martinu, L. (2012). Effect of postdeposition annealing on the structure, composition, and the mechanical and optical characteristics of niobium and tantalum oxide films. Applied Optics, 51(27), 6498-6507. Tiré de https://doi.org/10.1364/AO.51.006498
      • Article de revue
        Li, D., Hassani, S., Poulin, S., Szpunar, J.A., Martinu, L. & Klemberg-Sapieha, J.E. (2012). Effect of Si and C Concentration on the Microstructure, and the Mechanical, Tribological and Electrochemical Properties of Nanocomposite TiC/a-SiC:H/a-C:H Coatings Prepared by Plasma Enhanced Chemical Vapor Deposition. Journal of Applied Physics, 111(4). Tiré de https://doi.org/10.1063/1.3684602
      • Article de revue
        Hala, M., Capek, J., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2012). Hysteresis-Free Deposition of Niobium Oxide Films by Hipims Using Different Pulse Management Strategies. Journal of Physics D: Applied Physics, 45(5). Tiré de https://doi.org/10.1088/0022-3727/45/5/055204
      • Article de revue
        Hala, M., Capek, J., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2012). Pulse Management in High Power Pulsed Magnetron Sputtering of Niobium. Surface and Coatings Technology, 206(19-20), 4186-4193. Tiré de https://doi.org/10.1016/j.surfcoat.2012.04.019
      • Article de revue
        Capek, J., Hala, M., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2012). Steady State Discharge Optimization in High-Power Impulse Magnetron Sputtering Through the Control of the Magnetic Field. Journal of Applied Physics, 111(2), 9 pages. Tiré de https://doi.org/10.1063/1.3673871
    • 2011
      • Article de revue
        Li, D., Guruvenket, S. & Klemberg-Sapieha, J.E. (2011). Corrosion and tribo-corrosion enhancement of SS301 and Ti-6Al-4V substrates by amorphous hydrogenated SiN/SiC/a-C multilayer coating architecture. Surface and Coatings Technology, 206(7), 1893-1898. Tiré de https://doi.org/10.1016/j.surfcoat.2011.07.043
      • Article de revue
        Azzi, M., Klemberg-Sapieha, J.-E. & Martinu, L. (2011). Corrosion Behavior of Cr(Si)N/301 Stainless Steel System. ECS Transactions, 35(17), 67-73. Tiré de https://doi.org/10.1149/1.3641291
      • Article de revue
        Hala, M., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2011). Dynamics of HiPIMS discharge operated in oxygen. IEEE Transactions on Plasma Science, 39(11), 2582-2583. Tiré de https://doi.org/10.1109/TPS.2011.2150248
      • Article de revue
        Li, D., Guruvenket, S., Hassani, S., Bousser, E., Azzi, M., Szpunar, J.A. & Klemberg-Sapieha, J.E. (2011). Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 410. Thin Solid Films, 519(10), 3128-3134. Tiré de https://doi.org/10.1016/j.tsf.2010.12.020
      • Article de revue
        Strauss, H.W., Chromik, R.R., Hassani, S. & Klemberg-Sapieha, J.E. (2011). In situ tribology of nanocomposite Ti-Si-C-H coatings prepared by PE-CVD. Wear, 272(1), 133-148. Tiré de https://doi.org/10.1016/j.wear.2011.08.001
      • Article de revue
        Wusatowska-Sarnek, A.M., Dubiel, B., Czyrska-Filemonowicz, A., Bhowal, P.R., Ben Salah, N. & Klemberg-Sapieha, J.E. (2011). Microstructural characterization of the white etching layer in nickel-based superalloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42, 3813-3825. Tiré de https://doi.org/10.1007/s11661-011-0779-8
      • Article de revue
        Cetinorgu-Goldenberg, E., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J. & Martinu, L. (2011). Optical and tribomechanical stability of optically variable interference security devices prepared by dual ion beam sputtering. Applied Optics, 50(19), 3351-3359. Tiré de https://doi.org/10.1364/AO.50.003351
    • 2010
      • Article de revue
        Houska, J., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Atom-by-atom simulations of chemical vapor deposition of nanoporous hydrogenated silicon nitride. Journal of Applied Physics, 107(8), 083501. Tiré de https://doi.org/10.1063/1.3371680
      • Article de revue
        Azzi, M., Benkahoul, M., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Corrosion and mechanical properties of duplex-treated 301 stainless steel. Surface and Coatings Technology, 205(5), 1557-1563. Tiré de https://doi.org/10.1016/j.surfcoat.2010.08.155
      • Article de revue
        Li, D., Guruvenket, S., Azzi, M., Szpunar, J.A., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Corrosion and tribo-corrosion behavior of a-SiCx:H, a-SiNx:H and a-SiCxNy:H coatings on SS301 substrate. Surface and Coatings Technology, 204(9-10), 1616-1622. Tiré de https://doi.org/10.1016/j.surfcoat.2009.10.018
      • Article de revue
        Azzi, M., Amirault, P., Paquette, M., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers. Surface and Coatings Technology, 204(24), 3986-3994. Tiré de https://doi.org/10.1016/j.surfcoat.2010.05.004
      • Article de revue
        Hala, M., Viau, N., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Dynamics of reactive high-power impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging. Journal of Applied Physics, 107(4). Tiré de https://doi.org/10.1063/1.3305319
      • Article de revue
        Hassani, S., Bielawski, M., Beres, W., Balazinski, M., Martinu, L. & Klemberg-Sapieha, J.E. (2010). Impact stress absorption and load spreading in multi-layered erosion-resistant coatings. Wear, 268(5-6), 770-776. Tiré de https://doi.org/10.1016/j.wear.2009.11.012
      • Article de revue
        Hassani, S., Klemberg-Sapieha, J.-E. & Martinu, L. (2010). Mechanical, tribological and erosion behaviour of super-elastic hard Ti-Si-C coatings prepared by PECVD. Surface and Coatings Technology, 205(5), 1426-1430. Tiré de https://doi.org/10.1016/j.surfcoat.2010.07.098
      • Article de revue
        Guruvenket, S., Azzi, M., Li, D., Szpunar, J.A., Martinu, L. & Klemberg-Sapieha, J.E. (2010). Structural, mechanical, tribological, and corrosion properties of a-SiC:H coatings prepared by PECVD. Surface and Coatings Technology, 204(21-22), 3358-3365. Tiré de https://doi.org/10.1016/j.surfcoat.2010.03.031
      • Article de revue
        Hala, M., Zabeida, O., Baloukas, B., Klemberg-Sapieha, J.E. & Martinu, L. (2010). Time- and Species-resolved Plasma Imaging as a New Diagnostic Approach for HiPIMS Discharge Characterization. IEEE Transactions on Plasma Science, 38(11), 3035-3039. Tiré de https://doi.org/10.1109/TPS.2010.2064183
    • 2009
      • Article de revue
        Houska, J., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Atomistic simulations of the characteristics of TiSiN nanocomposites of various compositions. Surface and Coatings Technology, 203(22), 3348-3355. Tiré de https://doi.org/10.1016/j.surfcoat.2009.04.021
      • Article de revue
        Dudek, M., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Effect of substrate bias on the microstructure and properties of nanocomposite titanium nitride-based films. Journal of Achievements in Materials and Manufacturing Engineering, 37(2), 416-421. Tiré de http://jamme.acmsse.h2.pl/papers_vol37_2/37228.pdf
      • Article de revue
        Houska, J., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Formation and behavior of unbonded hydrogen in a-C:H of various compositions and densities. Surface and Coatings Technology, 203(24), 3770-3776. Tiré de https://doi.org/10.1016/j.surfcoat.2009.06.022
      • Article de revue
        Kala, J., Vernhes, R., Hreben, S., Vlcek, J., Klemberg-Sapieha, J.E. & Martinu, L. (2009). High-temperature stability of the mechanical and optical properties of Si-B-C-N films prepared by magnetron sputtering. Thin Solid Films, 518(1), 174-179. Tiré de https://doi.org/10.1016/j.tsf.2009.06.017
      • Article de revue
        Dudek, M., Amassian, A., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Ion bombardment-induced enhancement of the properties of indium tin oxide films prepared by plasma-assisted reactive magnetron sputtering. Thin Solid Films, 517(16), 4576-4582. Tiré de https://doi.org/10.1016/j.tsf.2009.01.012
      • Article de revue
        Cetinorgu, E., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Mechanical and thermoelastic characteristics of optical thin films deposited by dual ion beam sputtering. Applied Optics, 48(23), 4536-4544. Tiré de https://doi.org/10.1364/AO.48.004536
      • Article de revue
        Guruvenket, S., Li, D., Klemberg-Sapieha, J.E., Martinu, L. & Szpunar, J. (2009). Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel. Surface and Coatings Technology, 203(19), 2905-2911. Tiré de https://doi.org/10.1016/j.surfcoat.2009.03.009
      • Article de revue
        Amassian, A., Dudek, M., Zabeida, O., Gujrathi, S.C., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Oxygen incorporation and charge donor activation via subplantation during growth of indium tin oxide films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 27(2), 362-366. Tiré de https://doi.org/10.1116/1.3081970
      • Article de revue
        Houska, J., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Relationships between composition and properties of (Cr/Ti)SiN and (Cr/Ti)CN alloys: an ab initio study. Journal of Physics: Condensed Matter, 21(28), 285302. Tiré de https://doi.org/10.1088/0953-8984/21/28/285302
      • Article de revue
        Shingel, K.I., Roberge, C., Zabeida, O., Robert, M. & Klemberg-Sapieha, J.E. (2009). Solid emulsion gel as a novel construct for topical applications: Synthesis, morphology and mechanical properties. Journal of Materials Science: Materials in Medicine, 20(3), 681-689. Tiré de https://doi.org/10.1007/s10856-008-3613-0
      • Article de revue
        Azzi, M., Paquette, M., Szpunar, J.A., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Tribocorrosion behaviour of DLC-coated 316L stainless steel. Wear, 267(5-8), 860-866. Tiré de https://doi.org/10.1016/j.wear.2009.02.006
      • Article de revue
        Azzi, M., Benkahoul, M., Szpunar, J.A., Klemberg-Sapieha, J.E. & Martinu, L. (2009). Tribological properties of CrSiN-coated 301 stainless steel under wet and dry conditions. Wear, 267(5-8), 882-889. Tiré de https://doi.org/10.1016/j.wear.2009.01.027
      • Article de revue
        Benkahoul, M., Robin, P., Martinu, L. & Klemberg-Sapieha, J.E. (2009). Tribological properties of duplex Cr-Si-N coatings on SS410 steel. Surface and Coatings Technology, 203(8), 934-940. Tiré de https://doi.org/10.1016/j.surfcoat.2008.07.036
    • 2008
      • Article de revue
        Hassani, S., Klemberg-Sapieha, J.E., Bielawski, M., Beres, W., Martinu, L. & Balazinski, M. (2008). Design of Hard Coating Architecture for the Optimization of Erosion Resistance. Wear, 265(5-6), 879-887. Tiré de https://doi.org/10.1016/j.wear.2008.01.021
      • Article de revue
        Bousser, E., Benkahoul, M., Martinu, L. & Klemberg-Sapieha, J.E. (2008). Effect of microstructure on the erosion resistance of Cr-Si-N coatings. Surface and Coatings Technology, 203(5-7), 776-80. Tiré de https://doi.org/10.1016/j.surfcoat.2008.08.012
      • Article de revue
        Cizek, J., Vlcek, J., Potocky, S., Houska, J., Soukup, Z., Kalas, J., Jedrzejowski, P., Klemberg-Sapieha, J.E. & Martinu, L. (2008). Mechanical and Optical Properties of Quaternary Si-B-C-N Films Prepared by Reactive Magnetron Sputtering. Thin Solid Films, 516(21), 7286-7293. Tiré de https://doi.org/10.1016/j.tsf.2007.12.156
      • Article de revue
        Benkahoul, M., Robin, P., Gujrathi, S.C., Martinu, L. & Klemberg-Sapieha, J.E. (2008). Microstructure and Mechanical Properties of Cr-Si-N Coatings Prepared by Pulsed Reactive Dual Magnetron Sputtering. Surface and Coatings Technology, 202(16), 3975-3980. Tiré de https://doi.org/10.1016/j.surfcoat.2008.02.014
      • Article de revue
        Hassani, S., Bielawski, M., Beres, W., Martinu, L., Balazinski, M. & Klemberg-Sapieha, J.E. (2008). Predictive Tools for the Design of Erosion Resistant Coatings. Surface and Coatings Technology, 203(3-4), 204-210. Tiré de https://doi.org/10.1016/j.surfcoat.2008.08.050
    • 2007
      • Article de revue
        Zukerman, I., Raveh, A., Shneor, Y., Shneck, R., Klemberg-Saphieha, J.E. & Martinu, L. (2007). Internal Stress in TiAlBn at High Temperatures. Surface and Coatings Technology, 201(13), 6161-6166. Tiré de https://doi.org/10.1016/j.surfcoat.2006.08.136
      • Article de revue
        Snyders, R., Shingel, K.I., Zabeida, O., Roberge, C., Faure, M.-P., Martinu, L. & Klemberg-Sapieha, J.E. (2007). Mechanical and microstructural properties of hybrid poly(ethylene glycol)-soy protein hydrogels for wound dressing applications. Journal of Biomedical Materials Research. Part A, 83A(1), 88-97. Tiré de https://doi.org/10.1002/jbm.a.31217
      • Article de revue
        Snyders, R., Zabeida, O., Roberges, C., Shingel, K.I., Faure, M.P., Martinu, L. & Klemberg-Sapieha, J.E. (2007). Mechanism of Adhesion Between Protein-Based Hydrogels and Plasma Treated Polypropylene Backing. Surface Science, 601(1), 112-122. Tiré de https://doi.org/10.1016/j.susc.2006.09.011
      • Article de revue
        Zukerman, I., Raveh, A., Kalman, H., Klemberg-Sapieha, J.E. & Martinu, L. (2007). Thermal Stability and Wear Resistance of Hard TiN/TiCN Coatings on Plasma Nitrided Ph15-5 Steel. Wear, 263(7-12), 1249-1252. Tiré de https://doi.org/10.1016/j.wear.2006.11.049
      • Article de revue
        Zukerman, I., Raveh, A., Landau, Y., Weiss, R., Shneck, R., Shneor, Y., Kalman, H., Klemberg-Saphieha, J.E. & Martinu, L. (2007). Tribological Properties of Duplex Treated TiN/TiCN Coatings on Plasma Nitrided Ph15-5 Steel. Surface and Coatings Technology, 201(13), 6171-6175. Tiré de https://doi.org/10.1016/j.surfcoat.2006.08.135
      • Article de revue
        Snyders, R., Bousser, E., Amireault, P., Klemberg-Sapieha, J.E., Park, E., Taylor, K., Casey, K. & Martinu, L. (2007). Tribo-Mechanical Properties of DLC Coatings Deposited on Nitrided Biomedical Stainless Steel. Plasma Processes and Polymers, 4(S1), S640-S646. Tiré de https://doi.org/10.1002/ppap.200731601
    • 2006
      • Article de revue
        Vernhes, R., Amassian, A., Klemberg-Sapieha, J.E. & Martinu, L. (2006). Plasma treatment of porous SiNx:H films for the fabrication of porous-dense multilayer optical filters with tailored interfaces. Journal of Applied Physics, 99(11), 114315.1-114315.12. Tiré de https://doi.org/10.1063/1.2202692
      • Article de revue
        Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2006). Pulsed radio frequency plasma deposition of a-SiNx:H alloys: film properties, growth mechanism, and applications. Journal of Applied Physics, 100(6), 63308-1. Tiré de https://doi.org/10.1063/1.2349565
      • Article de revue
        Jedrzejowski, P., Amassian, A., Bousser, E., Klemberg-Sapieha, J.E. & Martinu, L. (2006). Real-time in situ growth study of TiN- and TiCxNy-based superhard nanocomposite coatings using spectroscopic ellipsometry. Applied Physics Letters, 88(7), 71915-1. Tiré de https://doi.org/10.1063/1.2173719
      • Article de revue
        Martinu, L., Masse, J.-P., Szymanowski, H., Zabeida, O., Amassian, A. & Klemberg-Sapieha, J.E. (2006). Stability and effect of annealing on the optical properties of plasma-deposited Ta2O5 and Nb2O5 films. Thin Solid Films, 515(4), 1674-1682. Tiré de https://doi.org/10.1016/j.tsf.2006.05.047
    • 2005
      • Article de revue
        Yang, D.Q., Poulin, S., Martinu, L., Klemberg-Sapieha, J.E., Zabeida, O. & Sacher, E. (2005). Microscale Chemical and Electrostatic Surface Patterning of Dow Cyclotene by N2 Plasma. Applied Surface Science, 242(3-4), 419-427. Tiré de https://doi.org/10.1016/j.apsusc.2004.09.077
      • Article de revue
        Szymanowski, H., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2005). Optical properties and microstructure of plasma deposited Ta2O5 and Nb2O5 films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 23(2), 241-247. Tiré de https://doi.org/10.1116/1.1851544
      • Article de revue
        Klemberg-Sapieha, J.E., Martinu, L., Yamasaki, N.L.S. & Lantman, C.W. (2005). Tailoring the Adhesion of Optical Films on Polymethyl-Methacrylate by Plasma-Induced Surface Stabilization. Thin Solid Films, 476(1), 101-107. Tiré de https://doi.org/10.1016/j.tsf.2004.09.050
    • 2004
      • Article de revue
        Amassian, A., Verhnes, R., Klemberg-Sapieha, J.E., Desjardins, P. & Martinu, L. (2004). Interface engineering during plasma-enhances chemical vapor deposition of porous/dense SiN1.3 optical multilayers. Thin Solid Films, 469-470, 47-53. Tiré de https://doi.org/10.1016/j.tsf.2004.07.072
      • Article de revue
        Jedrzejowski, P., Cizek, J., Amassian, A., Klemberg-Sapieha, J.E., Vlcek, J. & Martinu, L. (2004). Mechanical and optical properties of hard SiCN coatings prepared by PECVD. Thin Solid Films, 447-448, 201-207. Tiré de https://doi.org/10.1016/S0040-6090(03)01057-5
      • Article de revue
        Klemberg-Sapieha, J.E., Oberste-Berghaus, J., Martinu, L., Blacker, R., Stevenson, I., Sadkhin, G., Morton, D., Mceldowney, S., Klinger, R., Martin, P.J., Court, N., Dligatch, S., Gross, M. & Netterfield, R.P. (2004). Mechanical Characteristics of Optical Coatings Prepared by Various Techniques: a Comparative Study. Applied Optics, 43(13), 2670-2679. Tiré de https://doi.org/10.1364/AO.43.002670
      • Article de revue
        Larouche, S., Szymanowski, H., Klemberg-Sapieha, J.E., Martinu, L. & Gujrathi, S.C. (2004). Microstructure of plasma-deposited SiO2/TiO2 optical films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 22(4), 1200-1207. Tiré de https://doi.org/10.1116/1.1763912
      • Article de revue
        Jedrzejowski, P., Baloukas, B., Klemberg-Sapieha, J. & Martinu, L. (2004). Optical characteristics and color of TiN/SiN1.3 nanocomposite coatings. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 22(3), 725-733. Tiré de https://doi.org/10.1116/1.1723252
      • Article de revue
        Jedrzejowski, P., Klemberg-Sapieha, J.E. & Martinu, L. (2004). Optical Properties and Color of Hard Quaternary Nanocomposite TiCxNy/SiCN Coatings Prepared by Plasma Enhanced Chemical Vapor Deposition. Surface and Coatings Technology, 188-89, 371-375. Tiré de https://doi.org/10.1016/j.surfcoat.2004.08.026
      • Article de revue
        Jedrzejowski, P., Klemberg-Sapieha, J.E. & Martinu, L. (2004). Quaternary hard nanocomposite TiCxNy/SiCN coatings prepared by plasma enhanced chemical vapor deposition. Thin Solid Films, 466(1-2), 189-196. Tiré de https://doi.org/10.1016/j.tsf.2004.03.043
      • Article de revue
        Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2004). Single-material inhomogeneous optical filters based on microstructural gradients in plasma-deposited silicon nitride. Applied Optics, 43(1), 97-103. Tiré de https://doi.org/10.1364/AO.43.000097
      • Article de revue
        Raveh, A., Rubinshtein, A., Weiss, M., Mintz, M.H., Klemberg-Sapieha, J.E. & Martinu, L. (2004). Ta-C Micro-Composite Material Formed by Heat Treatment of Plasma Carburized Layer. Thin Solid Films, 466(1-2), 151-157. Tiré de https://doi.org/10.1016/j.tsf.2004.03.017
    • 2003
      • Article de revue
        Jedrzejowski, P, Klemberg-Sapieha, Je & Martinu, L. (2003). Relationship between the mechanical properties and the microstructure of nanocomposite TiN/SiN1.3 Coatings prepared by low temperature plasma enhanced chemical vapor deposition. Thin Solid Films, 426(1-2), 150-159. Tiré de https://doi.org/10.1016/S0040-6090(03)00028-2
      • Article de revue
        Wrobel, A.M., Blaszczyk, I., Walkiewicz-Pietrzykowska, A., Tracz, A., Klembrg-Sapieha, J.E., Aoki, T. & Hatanaka, Y. (2003). Remote Hydrogen-Nitrogen Plasma Chemical Vapor Deposition From a Tetramethyldisilazane Source. Part 1. Mechanism of the Process, Structure and Surface Morphology of Deposited Amorphous Hydrogenated Silicon Carbonitride Films. Journal of Materials Chemistry, 13(4), 731-737.
      • Article de revue
        Wrobel, A.M., Walkiewicz-Pietrzykowska, A., Klemberg-Sapieha, J.E., Nakanishi, Y., Aoki, T. & Hatanaka, Y. (2003). Remote Hydrogen Plasma Chemical Vapor Deposition From (Dimethylsilyl)(Trimethylsilyl)Methane. 1. Kinetics of the Process; Chemical and Morphological Structure of Deposited Silicon-Carbon Films. Chemistry of Materials, 15(8), 1749-1756. Tiré de https://doi.org/10.1021/cm021250c
      • Article de revue
        Wrobel, A.M., Walkiewicz-Pietrzykowska, A., Bielinski, D.M., Klemberg-Sapieha, J.E., Nakanishi, Y., Aoki, T. & Hatanaka, Y. (2003). Remote Hydrogen Plasma Chemical Vapor Deposition From (Dimethylsilyl)(Trimethylsilyl)Methane. 2. Property-Structure Relationships for Resulting Silicon-Carbon Films. Chemistry of Materials, 15(8), 1757-1762. Tiré de https://doi.org/10.1021/cm0212515
    • 2002
      • Article de revue
        Wrobel, A.M., Walkiewicz-Pietrzykowska, A., Klemberg-Sapieha, J.E., Hatanaka, Y., Aoki, T. & Nakanishi, Y. (2002). Remote Hydrogen Plasma Chemical Vapor Deposition of Silicon- Carbon Thin-Film Materials From a Hexamethyldisilane Source: Characterization of the Process and the Deposits. Journal of Applied Polymer Science, 86(6), 1445-1458. Tiré de https://doi.org/10.1002/app.11304
    • 1999
      • Article de revue
        Fozza, A.C., Klemberg-Sapieha, J.E. & Wertheimer, M.R. (1999). Vacuum ultraviolet irradiation of polymers. Plasmas and polymers, 4(2-3), 183-206.
    • 1998
      • Article de revue
        Bousmina, M., Qiu, H., Grmela, M. & Klemberg-Sapieha, J.E. (1998). Diffusion at Polymer/Polymer Interfaces Probed by Rheological Tools. Macromolecules, 31(23), 8273-8280. Tiré de https://doi.org/10.1021/ma980562r
      • Article de revue
        Sobrinho, A.S.D., Schuhler, N., Klemberg-Sapieha, J.E., Wertheimer, M.R., Andrews, M. & Gujrathi, S.C. (1998). Plasma-Deposited Silicon Oxide and Silicon Nitride Films on Poly(Ethylene Terephthalate): a Multitechnique Study of the Interphase Regions. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 16(4), 2021-2030.
      • Article de revue
        Bergeron, A., Klemberg-Sapieha, J.E. & Martinu, L. (1998). Structure of the Interfacial Region Between Polycarbonate and Plasma-Deposited SiN1.3 And SiO2 Optical Coatings Studied by Ellipsometry. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 16(6), 3227-3234. Tiré de https://doi.org/10.1116/1.581527
    • 1997
      • Article de revue
        Sacher, E. & Klemberg-Sapieha, J.E. (1997). Analysis of the x-ray photoelectron spectrum of teflon af 1600. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 15(4), 2143-2147. Tiré de https://doi.org/10.1116/1.580620
      • Article de revue
        Popovici, D., Klemberg-Sapieha, J.E., Czeremuszkin, G., Sacher, E., Meunier, M. & Martinu, L. (1997). Copper metallization of Teflon AF1600, using evaporation and sputtering, for multilevel interconnect devices. Microelectronic Engineering, 33(1-4), 217-221. Tiré de https://doi.org/10.1016/S0167-9317(96)00048-2
      • Article de revue
        Klemberg Sapieha, J.E., Poitras, D., Martinu, L., Yamasaki, N.L.S. & Lantman, C.W. (1997). Effect of interface on the characteristics of functional films deposited on polycarbonate in dual-frequency plasma. Journal of vacuum science and technology. A, Vacuum, surfaces, and films, 15(3), 985-991. Tiré de https://doi.org/10.1116/1.580792
      • Article de revue
        Houdayer, A., Cerny, G., Klemberg Sapieha, J.E., Czeremuszkin, G. & Wertheimer, M.R. (1997). Mev proton irradiations and atomic oxygen exposure of spacecraft materials with sio2 protective coatings. Nuclear Instruments & Methods in Physics Research. Section B, Beam interactions with materials and atoms, 131(1-4), 335-340. Tiré de https://doi.org/10.1016/S0168-583X(97)00362-5
      • Article de revue
        Wertheimer, M.R., Martinu, L. & Klemberg-Sapieha, J.E. (1997). NSERC (Natural Sciences and Engineering Research Council of Canada) Industrial research chair on `Low pressure plasma processing of materials'. Plasmas and Polymers, 2(1), 53-64. Tiré de https://doi.org/10.1007/BF02765660
      • Article de revue
        Fozza, A.C., Roch, J., Klemberg-Sapieha, J.E., Kruse, A., Hollaender, A. & Wertheimer, M.R. (1997). Oxidation and ablation of polymers by vacuum-UV radiation from low pressure plasmas. Nuclear Instruments & Methods in Physics Research. Section B, Beam interactions with materials and atoms, 131(1-4), 205-210. Tiré de https://doi.org/10.1016/S0168-583X(97)00154-7
    • 1993
      • Article de revue
        Sapieha, S., Cerny, J., Klemberg-Sapieha, J.E. & Martinu, L. (1993). Corona Versus Low-Pressure Plasma Treatment - Effect On Surface-Properties And Adhesion Of Polymers. Journal of Adhesion, 42(1-2), 91-102. Tiré de https://doi.org/10.1080/00218469308026573
    • 1991
      • Article de revue
        Raveh, A., Marouani, D., Ydgar, R., Klemberg-sapieha, J.E. & Bettelheim, A. (1991). Aging Effects of Epoxy Resin on Joining of Aluminum Plates. Journal of Adhesion, 36(2-3), 109-124. Tiré de https://doi.org/10.1080/00218469108027066
  • Communications de conférence (39)
    • 2019
      • Communication de conférence
        Baloukas, B., Beaini, R., Loquai, S., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2019). Thermochromic VO2 Coatings for Energy Control. Communication présentée à Optical Interference Coatings Conference (OIC 2019), Santa Ana Pueblo, New Mexico. Tiré de https://doi.org/10.1364/OIC.2019.MC.5
    • 2016
      • Communication de conférence
        Kohout, J., Schmitt, T., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.E. & Martinu, L. (2016). Durable AlN and Al2O3optical films deposited by low duty cycle pulsed magnetron sputtering. Communication présentée à Optical Interference Coatings (OIC 2016), Tucson, AZ, United states. Tiré de https://doi.org/10.1364/OIC.2016.WA.6
      • Communication de conférence
        Rimpault, X., Chatelain, J.-F., Klemberg-Sapieha, J.-E. & Balazinski, M. (2016). Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining. Communication présentée à 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany. (Publié dans Procedia CIRP, 46, 143-146). Tiré de https://doi.org/10.1016/j.procir.2016.03.171
      • Communication de conférence
        Caron, M., Zabeida, O., Martinu, L. & Klemberg-Sapieha, J.E. (2016). Stability and Performance of Organic-Inorganic Thin Films on Polymer Substrates. Communication présentée à 59th Annual Technical Conference of the Society-of-Vacuum-Coaters (SVC 2016), Indianapolis, IN (p. 273-283).
      • Communication de conférence
        Rimpault, X., Chatelain, J.-F., Klemberg-Sapieha, J.E. & Balazinski, M. (2016). Surface profile topography of trimmed and drilled carbon/epoxy composite. Communication présentée à 3e CIRP Conference on Surface Integrity (CSI 2016), Charlotte, Car. du N. (Publié dans Procedia CIRP, 45, 27-30). Tiré de https://doi.org/10.1016/j.procir.2016.02.160
    • 2015
      • Communication de conférence
        Vernhes, L., Azzi, M., Bousser, E. & Klemberg-Sapieha, J.E. (2015). Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC coating systems. Communication présentée à International Thermal Spray Conference and Exposition (ITSC 2015), Long Beach, CA, United states (p. 1031-1038).
      • Communication de conférence
        Rajesh, P.S.M., Gagne, M., Cauchy, X., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2015). Lightning protection of wet metalized polymer composites. Communication présentée à 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
      • Communication de conférence
        P. S. M., R., Gagne, M., Cauchy, X., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2015). Lightning protection testing of wet metalized polymer composites. Communication présentée à 20th International Conference on Composite Materials (ICCM 2015), Coppenhagen, Denmark (6 pages).
      • Communication de conférence
        P S M, R., Cauchy, X., Gagne, M., Klemberg-Sapieha, J.E., Sirois, F. & Therriault, D. (2015). Wet chemical metallization of aerospace composites as a lightning protection strategy. Communication présentée à TMS 2015 Annual Meeting & Exhibition, Orlando, Florida (p. 187-192). Tiré de https://doi.org/10.1002/9781119179856.ch18
    • 2014
      • Communication de conférence
        Rimpault, X., Chatelain, J.-F., Sapieha, J. & Balazinski, M. (2014). Burr Height Study for Drilling Carbon Epoxy Composite/Titanium/Aluminium Stacks. Communication présentée à Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing (JCM 2014), Toulouse France.
      • Communication de conférence
        Rimpault, X., Chatelain, J.-F., Sapieha, J. & Balazinski, M. (2014). Cutting parameter impact on forces and on hole diameter while drilling CFRP/titanium/aluminium stacks. Communication présentée à 3rd International Conference on Vitual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta (p. 8).
      • Communication de conférence
        Azzi, M., Bitar-Nehme, E. & Klemberg-Sapieha, J.E. (2014). Design of new multifunctional galling-corrosion testing apparatus. Communication présentée à ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Tiré de https://doi.org/10.1115/IMECE2014-39404
      • Communication de conférence
        Cauchy, X., Klemberg-Sapieha, J.E. & Therriault, D. (2014). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis. Communication présentée à 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states.
      • Communication de conférence
        Cauchy, X., Klemberg-Sapieha, J.-E. & Therriault, D. (2014). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites. Communication présentée à Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida.
      • Communication de conférence
        Azzi, M., Vernhes, L., Bousser, E. & Klemberg-Sapieha, J.E. (2014). Tribo-mechanical properties of CoCr and NiWCrB hardfacing superalloy coating systems. Communication présentée à ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Tiré de https://doi.org/10.1115/IMECE2014-39372
    • 2013
      • Communication de conférence
        Farahani, R.D., Klemberg-Sapieha, J.E. & Therriault, D. (2013). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution. Communication présentée à 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states (p. 1011-1021).
    • 2012
      • Communication de conférence
        Azzi, M. & Klemberg-Sapieha, J.-E. (2012). Effect of microstructure on the corrosion behavior of TiN coatings. Communication présentée à 2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), Guilin, China (p. 1911-1916).
    • 2005
      • Communication de conférence
        Jedrzejowski, P., Amassian, A., Bousser, E., Martinu, L. & Klemberg-Sapieha, J.E. (2005). Growth study of TiN and superhard nanocompostie c-TiN/Si3N4 and c-TiCN/a-SiCN coatings using in situ ellipsometry. Communication présentée à 48th Society of Vacuum Coaters Technical Conference, Denver, Colorado.
      • Communication de conférence
        Klemberg-Sapieha, J.E., Jedrzejowski, P. & Martinu, L. (2005). Hard and superhard nanocomposite coatings and their tribo-mechanical properties. Communication présentée à 4th Nanodiamond and related materials jointly with 6th diamond and related films, Zakopane, Poland.
      • Communication de conférence
        Zabeida, O., Klemberg-Sapieha, J.E. & Marinu, L. (2005). Ion-induced effects during reactive sputtering of ITO films. Communication présentée à 48th Society of Vacuum Coaters Technical Conference, Denver, Colorado (p. 192-196).
      • Communication de conférence
        Klemberg-Sapieha, J.E., Jedrzejowski, P. & Martinu, L. (2005). Measurement of superhard coatings by instrumented nano-indentation - progress report on the international VAMAS Activity. Communication présentée à 48th Society of Vacuum Coaters Technical Conference, Denver, Colorado (p. 592-594).
      • Communication de conférence
        Azzi, M., Bateni, M.R., Szpunar, J.A., Jedrzejowski, P. & Klemberg-Sapieha, J.E. (2005). The Effect of Texture on Friction of AISI304 Stainless Steel. Communication présentée à 14th International Conference on Textures of Materials (ICOTOM 2005), Leuven, Belgium (p. 1579-1584).
    • 2004
      • Communication de conférence
        Amassian, A., Vernhes, R., Klemberg-Sapieha, J.E., Desjardins, P. & Martinu, L. (2004). Interface engineering of porous/dense multilayers of SiN1.3: in situ real-time spectroscopic ellipsometry study. Communication présentée à 47th Society of Vacuum Coaters Technical Conference.
      • Communication de conférence
        Amassian, A., Vernhes, R., Klemberg-Sapieha, J.E., Desjardins, P. & Martinu, L. (2004). Study of the growht and interface engineering of dense/porouss SiN1.3 optical coatings by real-time spectroscopic ellipsometry. Communication présentée à Optical Interference Coatings, Washington, DC, USA.
    • 2002
      • Communication de conférence
        Amassian, A., Larouche, S., Klemberg-Sapieha, J., Desjardins, P. & Martinu, L. (2002). In situ ellipsometric study of the initial growth stages of a TiO2 by PECVD. Communication présentée à 45th Annual Technical Conference of the Society of Vacuum Coaters, Lake Buena Vista, FL, USA (p. 250-255).
    • 1999
      • Communication de conférence
        Dalacu, D., Brown, A.P., Klemberg-Sapieha, J.E., Martinu, L., Wertheimer, M.R., Najafi, S.I. & Andrews, M.A. (1999). Characterization of plasma-deposited Au/fluoropolymer nanocomposite films for nonlinear optical application. Communication présentée à 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. (Publié dans Materials Research Society Symposium - Proceedings, 544, 167-172). Tiré de https://doi.org/10.1557/PROC-544-167
      • Communication de conférence
        Zabeida, O., Klemberg-Sapieha, J.E., Martinu, L. & Morton, D. (1999). Effect of ion bombardment in polymer surface modification: comparison of pulsed high frequency plasma and ion beam. Communication présentée à 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. (Publié dans Materials Research Society Symposium - Proceedings, 544, 233-238). Tiré de https://doi.org/10.1557/PROC-544-233
      • Communication de conférence
        Zabeida, O., Klemberg-Sapieha, J.E., Martinu, L. & Morton, D.E. (1999). Ion bombardment characteristics during the growth of optical films using a cold cathode ion source. Communication présentée à Annual Technical Conference of the Society of Vacuum Coaters (p. 267-272).
      • Communication de conférence
        Hallil, A., Zabeida, O., Klemberg-Sapieha, J.E., Wertheimer, M.R. & Martinu, L. (1999). Mass resolved ion energy distributions in dual-mode microwave/radio frequency plasma. Communication présentée à Annual Technical Conference of the Society of Vacuum Coaters (p. 311-315).
      • Communication de conférence
        Dahl, S. & Klemberg-Sapieha, J.E. (1999). Nano-scale mechanical characterization of plasma treated polymer surfaces. Communication présentée à 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. (Publié dans Materials Research Society Symposium - Proceedings, 544, 121-126).
      • Communication de conférence
        Klemberg-Sapieha, J.E., Martinu, L., Yamasaki, N.L.S. & Lantman, C.W. (1999). Plasma-induced stabilization of PMMA surfaces for enhanced adhesion of plasma-deposited coatings. Communication présentée à 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. (Publié dans Materials Research Society Symposium - Proceedings, 544, 277-281). Tiré de https://doi.org/10.1557/PROC-544-277
      • Communication de conférence
        Martinu, L., Wertheimer, M.R. & Klemberg-Sapieha, J.E. (1999). Recent advances in plasma deposition of functional coatings on polymers. Communication présentée à 1998 MRS Fall Meeting: Symposium on Plasma Deposition and Treatment of Polymers, Boston, MA. (Publié dans Materials Research Society Symposium - Proceedings, 544, 251-256). Tiré de https://doi.org/10.1557/PROC-544-251
    • 1998
      • Communication de conférence
        Kunstler, W., Frubing, P., Gerhard-Multhaupt, R., Cerny, J., Klemberg-Sapieha, J., Martinu, L., Wertheimer, M.R., Hollander, A. & Behnisch, J. (1998). Surface-charging behavior of plasma-treated polymer films. Communication présentée à Conference on Electrical Insulation & Dielectric Phenomena, Atlanta, GA, USA (p. 609-612). Tiré de https://doi.org/10.1109/CEIDP.1998.732971
    • 1997
      • Communication de conférence
        Schuhler, N., da Silva Sobrinho, A.S., Klemberg-Sapieha, J.E., Andrews, M. & Wertheimer, M.R. (1997). Interphase characterization of silicon-based barrier layers on PET. Communication présentée à ACS San Francisco Meeting, San Francisco, CA, USA (p. 998-999).
      • Communication de conférence
        Fozza, A., Roch, J., Klemberg-Sapieha, J.E., Kruse, A., Hollander, A. & Wertheimer, M.R. (1997). Oxidation and ablation of polymers by vacuum-UV radiation from low pressure plasmas. Communication présentée à ACS San Francisco Meeting, San Francisco, CA, USA (p. 1097-1098).
      • Communication de conférence
        Wertheimer, M.R., Cerny, J., Klemberg-Sapieha, J.E., Martinu, L., Czeremuszkin, G. & Kremers, W. (1997). Plasma-deposited coatings and surface fluorination for protection of spacecraft materials against atomic oxygen erosion. Communication présentée à 7th International Symposium on Materials in Space Environment, Toulouse, France (p. 393-402).
      • Communication de conférence
        Popovici, D., Klemberg-Sapieha, J.E., Czeremuszkin, G., Sacher, E., Meunier, M. & Martinu, L. (1997). Proceedings of the 1996 E-MRS Spring Conference. Communication présentée à E-MRS Spring Conference, Strasbourg, Fr.
    • 1994
      • Communication de conférence
        Guenther, P., Thielemann, C., Klemberg Sapieha, J.E., Martinu, L. & Wertheimer, M.R. (1994). Cold plasma-deposited SiO2 and amorphous teflon af as electret coatings for mis-il solar cells. Communication présentée à 8th International Symposium on Electrets (ISE 1994), Paris, France.
      • Communication de conférence
        Bauer-Gogonea, S., Bauer, S., Wirges, W., Gerhard-Multhaupt, R., Klemberg-Sapieha, J., Martinu, L. & Wertheimer, M.R. (1994). In-situ pyroelectrical study of the polarization dynamics in nonlinear optical polymers and physico-chemical investigation of photo-induced degradation. Communication présentée à 8th International Symposium on Electrets (ISE 8), Paris, France (p. 824-829). Tiré de https://doi.org/10.1109/ISE.1994.517760
  • Chapitres de livre (3)
    • 2011
      • Chapitre de livre
        Azzi, M. & Klemberg-Sapieha, J.E. (2011). Tribocorrosion test protocols for sliding contacts. Dans Tribocorrosion of Passive Metals and Coatings (p. 222-238). Elsevier. Tiré de https://doi.org/10.1533/9780857093738.2.222
    • 2010
      • Chapitre de livre
        Martinu, L., Zabeida, O. & Klemberg-Sapieha, J.E. (2010). Plasma-Enhanced Chemical Vapor Deposition of Functional Coatings. Dans Handbook of deposition technologies for films and coatings : science, applications and technologu (p. 392-465). Elsevier. Tiré de https://doi.org/10.1016/B978-0-8155-2031-3.00009-0
    • 2003
  • Brevets (6)
    • 2018
      • Brevet
        Poirie, T., Schmitt, T., Martinu, L., Klemberg-Sapieha, J., Scherer, K., Trottier-Lapointe, W. & Dehoux, A. (2018). Article comprising a nanolaminate coating (Brevet n° WO 2018065595 - demande). Tiré de https://patents.google.com/patent/WO2018065595
      • Brevet
        Caron, M., Scherer, K., Zabeida, O., Martinu, L., Klemberg-Sapieha, J. & Schmitt, T. (2018). Ophthalmic lens having increased resistance to hot and humid environment (Brevet n° WO 2018036963 - demande). Tiré de https://patents.google.com/patent/WO2018036963
    • 2017
      • Brevet
        Chiarotto, S., Klemberg-Sapieha, J. & Caron, M. (2017). Article comprenant une couche organique-inorganique de bas indice de réfraction (Brevet n° WO 2017103537 - demande). Tiré de https://patents.google.com/patent/WO2017103537
      • Brevet
        Zabeida, O., Schmitt, T., Klemberg-Sapieha, J., Martinu, L. & Scherer, K. (2017). Article having optimised thermomechanical properties, comprising a layer of titano-organic nature (Brevet n° US 20170052285 - demande). Tiré de https://patents.google.com/patent/US20170052285
      • Brevet
        Trottier-Lapointe, W., Zabeida, O., Martinu, L., Klemberg-Sapieha, J. & Scherer, K. (2017). Optical article comprising a substrate with an antireflective coating (Brevet n° WO 2017194657 - demande). Tiré de https://patents.google.com/patent/WO2017194657
    • 2014
      • Brevet
        Martinu, L., Klemberg-Sapieha, J., Zabeida, O., Chiarotto, S. & Scherer, K. (2014). Article coated with an interference coating having properties that are stable over time (Brevet n° US 20140354945 - demande). Tiré de https://patents.google.com/patent/US20140354945