Répertoire des expertises

Vous êtes ici

Publications par type

Article de revue (86) Communication de conférence (168) Livre Chapitre de livre (2) Brevet Rapport (70) Thèse Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Aouni Lakis (326)

  • Articles de revue (86)
    • 2022
      • Article de revue
        Ben-Youssef, Y., Kerboua, Y. & Lakis, A.A. (2022). Analysis of nonlinear vibrations of thin cylindrical shells subjected to supersonic flow. Thin-Walled Structures, 173, 17 pages. Tiré de https://doi.org/10.1016/j.tws.2022.108969
    • 2021
      • Article de revue
        Ben-Youssef, Y., Kerboua, Y. & Lakis, A.A. (2021). An Analytical Approach for the Nonlinear Free Vibration Analysis of Thin-Walled Circular Cylindrical Shells. International Journal of Structural Stability and Dynamics, 21(12). Tiré de https://doi.org/10.1142/S0219455421501728
      • Article de revue
        Bahrami-Torabi, H., Kerboua, Y. & Lakis, A.A. (2021). Finite element model to investigate the dynamic instability of rectangular plates subjected to supersonic airflow. Journal of Fluids and Structures, 103, 13 pages. Tiré de https://doi.org/10.1016/j.jfluidstructs.2021.103267
      • Article de revue
        Ben-Youssef, Y., Kerboua, Y. & Lakis, A.A. (2021). Numerical modeling of initial stress stiffening effect on the dynamic behavior of axisymmetric shells. Journal of Pressure Vessel Technology, Transactions of the ASME, 143(5), 20 pages. Tiré de https://doi.org/10.1115/1.4050092
    • 2020
      • Article de revue
        Bakhtiari, M., Lakis, A.A. & Kerboua, Y. (2020). Nonlinear supersonic flutter of truncated conical shells. Journal of Mechanical Science and Technology, 34(4), 1375-1388. Tiré de https://doi.org/10.1007/s12206-020-0301-6
      • Article de revue
        Bakhtiari, M., Lakis, A.A. & Kerboua, Y. (2020). Nonlinear Vibration of Truncated Conical Shells: Donnell, Sanders and Nemeth Theories. International Journal of Nonlinear Sciences and Numerical Simulation, 21(1), 83-97. Tiré de https://doi.org/10.1515/ijnsns-2018-0377
    • 2019
      • Article de revue
        Lakis, A.A., Jalali, A.R. & Toorani, M. (2019). Coupled fluid-structure dynamics of composite plates. International Journal of Numerical Methods and Applications, 18(2), 43-88. Tiré de https://doi.org/10.17654/NM018020043
      • Article de revue
        Bakhtiari, M., Lakis, A.A. & Kerboua, Y. (2019). Derivatives of fourth order Kronecker power systems with applications in nonlinear elasticity. Applied Mathematics and Computation, 362(362), 14 pages. Tiré de https://doi.org/10.1016/j.amc.2019.06.015
    • 2018
    • 2017
    • 2016
    • 2015
      • Article de revue
        Mahvash, A. & Lakis, A.A. (2015). Application of cyclic spectral analysis in diagnosis of bearing faults in complex machinery. Tribology Transactions, 58(6), 1151-1158. Tiré de https://doi.org/10.1080/10402004.2015.1050135
      • Article de revue
        Menaa, M. & Lakis, A.A. (2015). Free Vibration of Spherical Shells Using a Hybrid Finite Element Method. International Journal of Structural Stability and Dynamics, 15(4), 29 pages. Tiré de https://doi.org/10.1142/s021945541450062x
    • 2014
    • 2013
      • Article de revue
        Oulmane, A., Lakis, A.A. & Mureithi, N. (2013). A method for analyzing rotating machinery faults using time-frequency application. International Journal of Condition Monitoring and Diagnostic Engineering Management, 16(2), 21-34. Tiré de http://www.comadem.com/journal/past-issues/
      • Article de revue
        Ramzi, R. & Lakis, A.A. (2013). Effect of geometric and fluid flow nonlinearities on cylindrical shells subjected to a supersonic flow. International Journal of Numerical Methods and Applications, 9(1), 1-37. Tiré de http://www.pphmj.com/abstract/7499.htm
      • Article de revue
        Ramzi, R. & Lakis, A.A. (2013). Effect of geometric nonlinearities on nonlinear vibrations of closed cylindrical shells. International Journal of Structural Stability and Dynamics, 13(4). Tiré de https://doi.org/10.1142/S0219455412500782
    • 2012
      • Article de revue
        Hosseini, S. & Lakis, A.A. (2012). Application of time-frequency analysis for automatic hidden corrosion detection in a multilayer aluminum structure using pulsed eddy current. NDT & E International, 47, 70-79. Tiré de https://doi.org/10.1016/j.ndteint.2011.12.001
      • Article de revue
        Esmailzadeh, M. & Lakis, A.A. (2012). Response of an open curved thin shell to a random pressure field arising from a turbulent boundary layer. Journal of Sound and Vibration, 331(2), 345-364. Tiré de https://doi.org/10.1016/j.jsv.2011.09.006
      • Article de revue
        Mortada, M.-A., Carroll, T., III, Yacout, S. & Lakis, A.A. (2012). Rogue components: Their effect and control using logical analysis of data. Journal of Intelligent Manufacturing, 23(2), 289-302. Tiré de https://doi.org/10.1007/s10845-009-0351-1
    • 2011
      • Article de revue
        Mahvash, A. & Lakis, A.A. (2011). A novel approach to evaluation of vibration source separation based on spatial distribution of sensors and Fourier transforms. Journal of Dynamic Systems, Measurement and Control, 133(6), 9 pages. Tiré de https://doi.org/10.1115/1.4005277
      • Article de revue
        Mortada, M.-A., Yacout, S. & Lakis, A.A. (2011). Diagnosis of rotor bearings using logical analysis of data. Journal of Quality in Maintenance Engineering, 17(4), 371-397. Tiré de https://doi.org/10.1108/13552511111180186
      • Article de revue
        Sabri, F. & Lakis, A.A. (2011). Effects of sloshing on flutter prediction of partially liquid-filled circular cylindrical shell. Journal of Aircraft, 48(6), 1829-1839. Tiré de https://doi.org/10.2514/1.C031071
      • Article de revue
        Sabri, F. & Lakis, A.A. (2011). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression. Aerospace Science and Technology, 15(4), 237-248. Tiré de https://doi.org/10.1016/j.ast.2010.07.003
      • Article de revue
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2011). Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, 25(3), 1028-1044. Tiré de https://doi.org/10.1016/j.ymssp.2010.08.014
      • Article de revue
        Lakis, A.A., Toorani, M.H., Kerboua, Y., Esmailzadeh, M. & Sabri, F. (2011). Theory, analysis and design of fluid-shell structures. Structural Longevity, 6(3), 155-185. Tiré de https://doi.org/10.3970/sl.2011.006.155
    • 2010
      • Article de revue
        Sabri, F. & Lakis, A.A. (2010). Finite element method applied to supersonic flutter of circular cylindrical shells. AIAA Journal, 48(1), 73-81. Tiré de https://doi.org/10.2514/1.39580
      • Article de revue
        Sabri, F. & Lakis, A.A. (2010). Hybrid finite element method applied to supersonic flutter of an empty or partially liquid-filled truncated conical shell. Journal of Sound and Vibration, 329(3), 302-316. Tiré de https://doi.org/10.1016/j.jsv.2009.09.023
      • Article de revue
        Kerboua, Y., Lakis, A.A. & Hmila, M. (2010). Vibration analysis of truncated conical shells subjected to flowing fluid. Applied Mathematical Modelling, 34(3), 791-809. Tiré de https://doi.org/10.1016/j.apm.2009.06.028
    • 2009
      • Article de revue
        Esmailzadeh, M., Lakis, A.A., Thomas, M. & Marcouiller, L. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. Journal of Sound and Vibration, 328(1-2), 109-128. Tiré de https://doi.org/10.1016/j.jsv.2009.07.027
      • Article de revue
        Lakis, A.A., Bursuc, G. & Toorani, M.H. (2009). Sloshing effect on the dynamic behavior of horizontal cylindrical shells. Nuclear Engineering and Design, 239(7), 1193-1206. Tiré de https://doi.org/10.1016/j.nucengdes.2009.03.015
    • 2008
      • Article de revue
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2008). Computational Modeling of Coupled Fluid-Structure Systems With Applications. Structural Engineering and Mechanics, 29(1), 91-111. Tiré de https://doi.org/10.12989/sem.2008.29.1.091
      • Article de revue
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2008). Modelling of plates subjected to flowing fluid under various boundary conditions. Engineering Applications of Computational Fluid Mechanics, 2(4), 525-539. Tiré de https://doi.org/10.1080/19942060.2008.11015249
      • Article de revue
        Bouzidane, A., Thomas, M. & Lakis, A.A. (2008). Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers. Journal of Tribology, 130(4). Tiré de https://doi.org/10.1115/1.2958079
      • Article de revue
        Esmailzadeh, M., Lakis, A.A., Thomas, M. & Marcouiller, L. (2008). Three-dimensional modeling of curved structures containing and/or submerged in fluid. Finite Elements in Analysis and Design, 44(6-7), 334-345. Tiré de https://doi.org/10.1016/j.finel.2007.11.019
      • Article de revue
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2008). Vibration analysis of rectangular plates coupled with fluid. Applied Mathematical Modelling, 32(12), 2570-2586. Tiré de https://doi.org/10.1016/j.apm.2007.09.004
    • 2007
    • 2006
      • Article de revue
        Toorani, M.H. & Lakis, A.A. (2006). Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid. International Journal for Numerical Methods in Fluids, 50(4), 397-420. Tiré de https://doi.org/10.1002/fld.1058
    • 2005
    • 2003
      • Article de revue
        Toorani, M.H. & Lakis, A.A. (2003). Dynamics behavior of axisymmetric and beam-like anisotropic cylindrical shells conveying fluid. Journal of Sound and Vibration, 259(2), 265-298. Tiré de https://doi.org/10.1006/jsvi.2002.5161
    • 2002
      • Article de revue
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2002). Time-frequency distributions and their application to machinery fault detection. International Journal of Condition Monitoring and Diagnosis Engineering Management, 5(2), 41-56.
    • 2001
      • Article de revue
        Toorani, M.H. & Lakis, A.A. (2001). Dynamic analysis of anisotropic cylindrical shells containing flowing fluid. Journal of Pressure Vessel Technology, 123(4), 454-460. Tiré de https://doi.org/10.1115/1.1401023
      • Article de revue
        Oncescu, F., Lakis, A.A. & Ostiguy, G.L. (2001). Investigation of the stability and steady state response of asymmetric rotors, using finite element formulation. Journal of Sound and Vibration, 245(2), 303-328. Tiré de https://doi.org/10.1006/jsvi.2001.3570
      • Article de revue
        Haulin, E.N., Lakis, A.A. & Vinet, R. (2001). Optimal Synthesis of a Planar Four-Link Mechanism Used in a Hand Prosthesis. Mechanism and Machine Theory, 36(11-12), 1203-1214. Tiré de https://doi.org/10.1016/S0094-114X(01)00039-8
      • Article de revue
        Charbonneau, E. & Lakis, A.A. (2001). Semi-analytical shape functions in the finite element analysis of rectangular plates. Journal of Sound and Vibration, 242(3), 427-443. Tiré de https://doi.org/10.1006/jsvi.2000.3373
      • Article de revue
        Toorani, M.H. & Lakis, A.A. (2001). Shear deformation in dynamic analysis of anisotropic laminated open cylindrical shells filled with or subjected to a flowing fluid. Computer Methods in Applied Mechanics and Engineering, 190(37-38), 4929-4966. Tiré de https://doi.org/10.1016/S0045-7825(00)00357-1
    • 2000
      • Article de revue
        Lakis, A.A. (2000). Comments on "Natural Frequencies of Transverse Vibrations of Non-Uniform Circular and Annular Plates" - Reply. Journal of Sound and Vibration, 230(2), 448. Tiré de https://doi.org/10.1006/jsvi.1999.2576
      • Article de revue
        Toorani, M.H. & Lakis, A.A. (2000). General equations of anisotropic plates and shells including transverse shear deformations, rotary inertia and initial curvature effects. Journal of Sound and Vibration, 237(4), 561-615. Tiré de https://doi.org/10.1006/jsvi.2000.3073
      • Article de revue
        Lakis, A.A. & Selmane, A. (2000). Hybrid finite element analysis of large amplitude vibration of orthotropic open and closed cylindrical shells subjected to a flowing fluid. Nuclear Engineering and Design, 196(1), 15 pages. Tiré de https://doi.org/10.1016/S0029-5493(99)00227-7
      • Article de revue
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2000). Time-frequency algorithms and their applications. International Journal of Computers and Their Applications, 7(4), 20 pages.
      • Article de revue
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2000). Using short-time Fourier transforms in machinery fault diagnosis. International Journal of COMADEM, 3(1), 5-16.
    • 1999
      • Article de revue
        Smail, M., Thomas, M. & Lakis, A.A. (1999). ARMA models for modal analysis: Effect of model orders and sampling frequency. Mechanical Systems and Signal Processing, 13(6), 925-941. Tiré de https://doi.org/10.1006/mssp.1999.1235
      • Article de revue
        Smail, M., Thomas, M. & Lakis, A.A. (1999). Assessment of optimal ARMA model orders for modal analysis. Mechanical Systems and Signal Processing, 13(5), 803-819. Tiré de https://doi.org/10.1006/mssp.1999.1224
      • Article de revue
        Selmane, A. & Lakis, A.A. (1999). Natural frequencies of transverse vibrations of non-uniform circular and annular plates. Journal of Sound and Vibration, 220(2), 225-249. Tiré de https://doi.org/10.1006/jsvi.1998.1921
    • 1998
      • Article de revue
        Lakis, A.A., Selmane, A. & Toledano, A. (1998). Non-Linear Free Vibration Analysis of Laminated Orthotropic Cylindrical Shells. International Journal of Mechanical Sciences, 40(1), 27-49. Tiré de https://doi.org/10.1016/S0020-7403(97)00029-5
      • Article de revue
        Amabili, M., Paidoussis, M.P. & Lakis, A.A. (1998). Vibrations of partially filled cylindrical tanks with ring-stiffeners and flexible bottom. Journal of sound and vibration, 213(2), 259-299. Tiré de https://doi.org/10.1006/jsvi.1997.1481
    • 1997
    • 1992
      • Article de revue
        Lakis, A.A., Van Dyke, P. & Ouriche, H. (1992). Dynamic analysis of anisotropic fluid-filled conical shells. Journal of Fluids and Structures, 6(2), 135-162. Tiré de https://doi.org/10.1016/0889-9746(92)90042-2
      • Article de revue
        Lakis, A.A. & Sinno, M. (1992). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid. International Journal for Numerical Methods in Engineering, 33(2), 235-268. Tiré de https://doi.org/10.1002/nme.1620330203
    • 1991
      • Article de revue
        Lakis, A.A. & Laveau, A. (1991). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. International Journal of Solids and Structures, 28(9), 1079-1094. Tiré de https://doi.org/10.1016/0020-7683(91)90103-m
    • 1978
      • Article de revue
        Lakis, A.A. & Doré, R. (1978). General method for analysing contact stresses on cylindrical vessels. International Journal of Solids and Structures, 14(6), 499-516. Tiré de https://doi.org/10.1016/0020-7683(78)90013-6
    • 1977
      • Article de revue
        Lakis, A.A. & Khuong, T.V. (1977). Analysis of non-uniform anisotropic thin cylindrical shells. Journal of Computers and Structures, 28(9), 1079-1094.
    • 1972
      • Article de revue
        Lakis, A.A. & Païdoussis, M.P. (1972). Prediction of the response of a cylindrical shell to arbitrary or boundary-layer-induced random pressure fields. Journal of Sound and Vibration, 25(1), 27 pages. Tiré de https://doi.org/10.1016/0022-460x(72)90592-5
      • Article de revue
        Païdoussis, M.P. & Lakis, A.A. (1972). Vibration characteristics of cylindrical shells with several axially equispaced constraints. Journal of Sound and Vibration, 24(1), 51-62. Tiré de https://doi.org/10.1016/0022-460x(72)90122-8
    • 1971
      • Article de revue
        Lakis, A.A. & Païdoussis, M.P. (1971). Free vibration of cylindrical shells partially filled with liquid. Journal of Sound and Vibration, 19(1), 15 pages. Tiré de https://doi.org/10.1016/0022-460x(71)90417-2
  • Communications de conférence (168)
    • 2018
      • Communication de conférence
        Lakis, A.A., Mahvash, A. & Toorani, M. (2018). Diagnosis of bearing faults in complex machinery using spatial distribution of sensors and Fourier transforms. Communication présentée à 6th International Conference on Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal (p. 217-224). Tiré de https://paginas.fe.up.pt/~irf/Proceedings_IRF2018/data/papers/7163.pdf
    • 2017
      • Communication de conférence
        Lakis, A.A., Kerboua, Y. & Tourani, M. (2017). Aeroelastic analysis of combined conical-cylindrical shells. Communication présentée à 7th International Conference on Mechanics and Materials in Design (M2D 2017), Albufeira, Portugal (p. 139-150). Tiré de https://paginas.fe.up.pt/~m2d/Proceedings_M2D2017/data/papers/6642.pdf
      • Communication de conférence
        Lakis, A.A., Sabri, F. & Toorani, M. (2017). A semi-analytical method in supersonic flutter analysis of fluid-filled truncated conical shells. Communication présentée à International Conference on Structural Engineering Dynamics (ICEDyn 2017), Ericeira, Portugal.
    • 2015
      • Communication de conférence
        Lakis, A.A., Sabri, F. & Toorani, M. (2015). Dynamic stability analysis of partially liquid-filled cylindrical shells. Communication présentée à International Conference on Structural Engineering Dynamics (ICEDyn 2015), Lagos, Portugal.
      • Communication de conférence
        Lakis, A.A. & Toorani, M. (2015). Fluid-structure interaction analysis of composite shell structures. Communication présentée à 18th International Conference on Composite Structures (ICCS 2015), Lisbon, Portugal.
      • Communication de conférence
        Lakis, A.A., Sabri, F., Kerboua, Y., Esmailzadeh, M. & Toorani, M. (2015). Hybrid finite element method in aeroelastic analysis of shell-type structures. Communication présentée à 7th European Aeronautics Days 2015 (Aerodays 2015), London, UK.
      • Communication de conférence
        Lakis, A.A., Hosseini, S.M.S., Toorani, M. & Sassi, S. (2015). Pulsed eddy current and time-frequency analysis in detecting the corrosion distribution in a multilayer aluminum plate. Communication présentée à 6th International Conference on Mechanics and Materials in Design (M2D2015), Ponta Delgada, Portugal (p. 203-212).
    • 2014
      • Communication de conférence
        Lakis, A.A., Ramzi, R. & Toorani, M. (2014). Non-linear dynamic analysis of cylindrical shells subjected to a supersonic flow. Communication présentée à 7th Chaotic Modeling and Simulation International Conference (CHAOS 2014), Lisbon, Portugal.
    • 2013
      • Communication de conférence
        Lakis, A.A., Mahvash, A. & Toorani, M. (2013). Development of intelligent health monitoring systems for rotating machinery and structural components. Communication présentée à 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal.
      • Communication de conférence
        Lakis, A.A., Esmailzadeh, M. & Toorani, M. (2013). Dynamic response on an open curved thin shell to random pressure field arising from a turbulent boundary layer. Communication présentée à International Conference on Structural Engineering Dynamics (ICEDyn 2013), Sesimba, Portugal.
    • 2012
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2012). Aeroelastic analysis of truncated conical shell subjected to supersonic flow. Communication présentée à 15th International Conference on Experimental Mechanics (ICEM 2012), Porto, Portugal.
      • Communication de conférence
        Oulmane, A., Lakis, A.A. & Mureithi, N. (2012). Automatic classification of rotating machinery faults using Fourier descriptors and neural networks. Communication présentée à 15th International Conference on Experimental Mechanics, Porto, Portugal.
      • Communication de conférence
        Lakis, A.A. & Toorani, M. (2012). Dynamic analysis of composite shell structures subjected to fluid forces. Communication présentée à 1st International Conference on Composites Dynamics, Arcachon, France.
      • Communication de conférence
        Lakis, A.A., Toorani, M., Kerboua, Y., Esmailzadeh, M. & Sabri, F. (2012). Dynamic analysis of fluid-shell structures. Communication présentée à 15th International Conference on Experimental Mechanics, Porto, Portugal.
      • Communication de conférence
        Sabri, F., Meguid, S.A. & Lakis, A.A. (2012). Modeling flutter response of a flexible morphing wing for UAV. Communication présentée à 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, USA. Tiré de https://doi.org/10.2514/6.2012-1707
      • Communication de conférence
        Esmailzadeh, M. & Lakis, A.A. (2012). Random vibration prediction of a curved thin shell subjected to turbulent pressure boundary-layer induced pressure field. Communication présentée à 15th International Conference on Experimental Mechanics, Porto, Portugal.
    • 2011
      • Communication de conférence
        Sabri, F., Meguid, S.A., Lakis, A.A. & Tan, K. (2011). Aeroelastic behavior of a novel morphing wing using shape memory alloys. Communication présentée à 15th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2011), Paris, France.
      • Communication de conférence
        Mortada, M.A., Yacout, S. & Lakis, A.A. (2011). CBMLAD : Using logical analysis of data in condition based maintenance. Communication présentée à International Conference on Systems Engineering and Modeling (ICSEM 2011), Shanghai, China.
      • Communication de conférence
        Redouane, R. & Lakis, A.A. (2011). Dynamic behavior of cylindrical shells subjected to nonlinearities of fluid flow. Communication présentée à ASME Pressure Vessels and Piping Conference (PVP 2011), Baltimore, Maryland.
      • Communication de conférence
        Lakis, A.A., Toorani, M.H., Kerboua, Y., Esmailzadeh, M. & Sabri, F. (2011). Theory, analysis, and design of fluid-shell structures. Communication présentée à 11th International Conference on Computational & Experimental Engineering & Sciences, Nanjing, China.
    • 2010
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2010). Aerothermoelastic stability of functionally graded circular cylindrical shells. Communication présentée à 3rd ASME Joint US-European Fluids Engineering Summer Meeting, collocated with 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec (p. 939-945). Tiré de https://doi.org/10.1115/FEDSM-ICNMM2010-30384
      • Communication de conférence
        Mahvash, A. & Lakis, A.A. (2010). Application of multi-sensor data acquisition and fourier transform in separation of vibration sources. Communication présentée à 23rd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2010), Nara, Japan (p. 743-749).
      • Communication de conférence
        Hosseini, S. & Lakis, A.A. (2010). Application of time-frequency analysis for automatic thickness detection in aluminum structure using pulsed eddy current. Communication présentée à Annual Seminar of the Canadian Machine Virbration Association, Québec City, Canada.
      • Communication de conférence
        Toorani, M.H., Lakis, A.A. & Bursuc, G. (2010). Dynamic analysis of cylindrical shells subjected to flowing fluid and fluid surface effect. Communication présentée à 7th International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions and Flow-Induced Vibration & Noise, Montréal, Québec.
      • Communication de conférence
        Ramzi, R. & Lakis, A.A. (2010). Effects of fluid flow nonlinearities on the dynamic behaviour of cylindrical shells subjected to a supersonic flow. Communication présentée à 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec (p. 947-953). Tiré de https://doi.org/10.1115/FEDSM-ICNMM2010-30386
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2010). Effects of sloshing on flutter prediction of partially liquid filled circular cylindrical shell. Communication présentée à 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, FL, United states. Tiré de https://doi.org/10.2514/6.2010-2884
      • Communication de conférence
        Komgom, N.C., Mureithi, N. & Lakis, A.A. (2010). High speed bearing fault diagnostic using spectral kurtosis and support vector machine. Communication présentée à Annual Seminar of the Canadian Machine Virbration Association, Québec City, Canada.
      • Communication de conférence
        Esmailzadeh, M. & Lakis, A.A. (2010). Turbulence-induced vibration analysis of an open curved thin shell. Communication présentée à 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montréal, Québec. Tiré de https://doi.org/10.1115/FEDSM-ICNMM2010-30383
    • 2009
      • Communication de conférence
        Lakis, A.A. & Toorani, M.H. (2009). Application of time-frequency method in fault diagnosis of rotating machinery. Communication présentée à 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal.
      • Communication de conférence
        Kerboua, Y., Lakis, A.A., Thomas, M., Marcouiller, L. & Toorani, M.H. (2009). Critical velocity of potential flow in interaction with a system of plates. Communication présentée à 17th International Conference on Nuclear Engineering (ICONE 2009), Brussels, Belgium (p. 281-289). Tiré de https://doi.org/10.1115/ICONE17-76059
      • Communication de conférence
        Mahvash, A., Oulmane, A. & Lakis, A.A. (2009). Development of an intelligent health monitoring system for rotating machinery and structural components. Communication présentée à CANEUS Fly-by-Wireless Workshop (FBW 2009), Montréal, Québec.
      • Communication de conférence
        Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A.A. & Mureithi, N. (2009). Étude du comportement des roulements dans les rotors tournant à haute vitesse. Communication présentée à 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France (15 pages).
      • Communication de conférence
        Kerboua, Y., Lakis, A.A., Thomas, M., Marcouiller, L. & Toorani, M.H. (2009). Hybrid element in fluid-structure interaction of plates and shells. Communication présentée à 12th International Conference on Civil, Structural and Environmental Engineering, Madeira, Portugal.
      • Communication de conférence
        Sabri, F., Lakis, A.A. & Toorani, M.H. (2009). Hybrid finite element method in supersonic flutter analysis of circular cylindrical shells. Communication présentée à 31st International Conference on Boundary Elements and Other Mesh Reduction Methods (BEM/MRM 2009), New Forest, United kingdom (p. 233-244). Tiré de https://doi.org/10.2495/BE090211
      • Communication de conférence
        Ouahabi, A., Thomas, M. & Lakis, A.A. (2009). Hybrid monitoring of crack location in riveted plates by combining an experimental modal analysis with numerical models. Communication présentée à 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France.
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2009). Hydroelastic vibration of partially liquid-filled circular cylindrical shells under combined internal pressure and axial compression. Communication présentée à 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California. Tiré de https://doi.org/10.2514/6.2009-2646
      • Communication de conférence
        Sghir, K.A., El Badaoui, M., Thomas, M., Zaghbani, I., Songméné, V., Lakis, A.A. & Mureithi, N. (2009). Identification aveugle paramétrique de la fonction de réponse impulsionnelle basée sur la cyclostationnarité de second ordre à partir des réponses seulement. Communication présentée à 2e congrès international sur l'ingénierie des risques industriels (CIRI 2009), Reims, France.
      • Communication de conférence
        Badri, B., Thomas, M., Sassi, S., Zaghbani, I., Songméné, V., Lakis, A.A. & Mureithi, N. (2009). Instabilité des fraiseuses opérant à haute vitesse, provoquée par l'intéraction des défauts de roulements avec les résonances. Communication présentée à 27th Seminar on Machinery Vibration (CMVA 2009), Vancouver, B.C. Tiré de https://www.etsmtl.ca/ETS/media/ImagesETS/Labo/DYNAMO/Publications/2009/CMVA-2009-MT.pdf
      • Communication de conférence
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2009). Online monitoring of varying modal parameters by operating modal analysis and model updating. Communication présentée à 2nd International Conference on Industrial Risk Engineering (CIRI 2009), Reims, France (19 pages). Tiré de https://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.728.669
      • Communication de conférence
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2009). Operational modal analysis by short time autoregressive modeling. Communication présentée à 3rd International Conference on Integrity, Reliability & Failure (IRF 2009), Porto, Portugal.
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2009). Supersonic flutter of empty and partially liquid-filled circular cylindrical shells. Communication présentée à 14th International Forum on Aeroelasticity and Structural Dynamics, Seattle, WA.
      • Communication de conférence
        Oulmane, A., Lakis, A.A., Mureithi, N. & Safizadeh, M.S. (2009). The application of time-frequency analysis in rotating machinery fault diagnostic. Communication présentée à 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2009), San Sebastian, Spain (p. 579-583).
    • 2008
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Oulmane, A. (2008). Application of time-frequency analysis to signals from high speed bearing. Communication présentée à 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic.
      • Communication de conférence
        Komgom, N.C., Mureithi, N. & Lakis, A.A. (2008). Application of time synchronous averaging, spectral kurtosis and support vector machines for bearing fault identification. Communication présentée à ASME Pressure Vessels & Piping Conference (PVP 2008), Chicago, IL. Tiré de https://doi.org/10.1115/PVP2008-61601
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Toorani, M.H. (2008). Detection and classification of hidden corrosion using intelligent pulsed eddy current technique. Communication présentée à 1er Colloque Québec-Aquitaine, Bordeaux, France.
      • Communication de conférence
        Païdoussis, M.P., Lakis, A.A. & Karagiozis, K.N. (2008). Nonlinear vibrations on empty and fluid clamped shells of different materials. Communication présentée à 9th International Conference on Flow-Induced Vibrations (FIV 2008), Prague, Czech Republic.
      • Communication de conférence
        Sabri, F. & Lakis, A.A. (2008). Supersonic flutter of partially liquid-filled circular cylindrical shells subjected to internal pressure and axial compression. Communication présentée à 4th WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2008), Cairo, Egypt (p. 87-94). Tiré de http://www.wseas.us/e-library/conferences/2008/cairo/CD-MECHANICS/MECHANICS14.pdf
      • Communication de conférence
        Sassi, S., Badri, B., Thomas, M. & Lakis, A.A. (2008). Tracking surface degradation of ball bearing by means of new time domain scalar indicators. Communication présentée à 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic (12 pages).
    • 2007
      • Communication de conférence
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2007). A time domain method for modal identification of vibratory signals. Communication présentée à 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec (p. 202-218).
      • Communication de conférence
        Komgom, N.C., Mureithi, N., Lakis, A.A. & Thomas, M. (2007). Bearing fault detection using pattern recognition methods applied to the Case Western Reserve University bearing data. Communication présentée à 25th Seminar on Machinery Vibration (CMVA 2007), St. John, New Brunswick.
      • Communication de conférence
        Badri, B., Thomas, M., Sassi, S. & Lakis, A.A. (2007). Combination of bearing defect simulator and artificial neural network for the diagnosis of damaged bearings. Communication présentée à 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal (p. 175-185).
      • Communication de conférence
        Kerboua, Y., Lakis, A.A., Thomas, M., Marcouiller, L. & Toorani, M.H. (2007). Dynamic analysis of coupled-fluid structure systems. Communication présentée à 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal (p. 417-424).
      • Communication de conférence
        Lakis, A.A., Brusuc, G. & Toorani, M. (2007). Fluid free surface effect on the vibration analysis of cylindrical shells. Communication présentée à International Congress on Advances in Nuclear Power Plants (ICAPP 2007), Nice, France (p. 1642-1648).
      • Communication de conférence
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2007). Identification of modal parameters by operational modal analysis for the assessment of bridge rehabilitation. Communication présentée à 2nd International Operational Modal Analysis Conference (IOMAC 2007), Copenhagen, Danemark (p. 111-120). Tiré de http://iomac.eu/iomac/2007/pdf/16vu-15.pdf
      • Communication de conférence
        Vu, V.H., Thomas, M. & Lakis, A.A. (2007). Le pont est-il fort? Réponse d'une technique d'analyse modale opérationnelle. Communication présentée à 42e Congrès de l'AQTR, défi transport durable, Montréal, Québec (17 pages).
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2007). Machinery diagnosis by wavelet analysis. Communication présentée à 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal (p. 417-424).
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2007). Non-linear flow-induced vibrations in composite cylindrical shells. Communication présentée à 15th Annual Conference on Mechanical Engineering (ISME 2007), Tehran, Iran.
      • Communication de conférence
        Komgom, N.C., Mureithi, N., Lakis, A.A. & Thomas, M. (2007). On the use of time synchronous averaging, independent component analysis and support vector machines for bearing fault diagnosis. Communication présentée à 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec (p. 610-624). Tiré de https://www.etsmtl.ca/getattachment/Unites-de-recherche/DYNAMO/Recherche-et-innovation/Publications/VI04_Manu_Komgom_.pdf.aspx
      • Communication de conférence
        Badri, B., Thomas, M., Archambault, R., Sassi, S. & Lakis, A.A. (2007). Rapid Julien transform: A new method for shock detection and time-domain classification. Communication présentée à 20th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), Faro, Portugal (p. 667-676).
      • Communication de conférence
        Komgom, N.C., Mureithi, N., Lakis, A.A. & Thomas, M. (2007). Time synchronous analysis and pattern recognition methods for bearing fault detection. Communication présentée à 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec.
      • Communication de conférence
        Badri, B., Thomas, M., Archambault, R., Sassi, S., Lakis, A.A. & Mureithi, N. (2007). Une nouvelle méthode pour différentier les signaux de chocs synchrones et asynchrones. Communication présentée à 1er Congrès international sur l'ingénierie des risques industriels (CIRI 2007), Montréal, Québec (p. 625-636).
    • 2006
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2006). Coupled fluid-structure interaction in composite cylindrical shells conveying axial flow. Communication présentée à 3rd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal.
      • Communication de conférence
        Ouahabi, A., Thomas, M. & Lakis, A.A. (2006). Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis. Communication présentée à 3rd European Workshop on Structural Health Monitoring, Granada, Spain (p. 775-782).
      • Communication de conférence
        Kerboua, Y., Lakis, A.A., Thomas, M., Marcouiller, L. & Toorani, M.H. (2006). Dynamic analysis of coupled fluid-structure systems. Communication présentée à 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS 2006), Venice, Italy (p. 249-258). Tiré de http://www.wseas.us/e-library/conferences/2006venice/papers/539-420.pdf
    • 2005
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2005). Using short-time Fourier transform in machinery diagnosis. Communication présentée à 4th WSEAS International Conference on Electronics, Signal Processing and Control (ESPOCO 2005), Rio de Janeiro, Brazil (7 pages). Tiré de http://www.wseas.us/e-library/conferences/2005brazil/papers/494-200.pdf
      • Communication de conférence
        Sanschagrin, B., Fortin, C., Vadean, A. & Lakis, A. (2005). Virtual product development within a fourth year option in the mechanical enginering curriculum. Communication présentée à Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada. Tiré de https://doi.org/10.24908/pceea.v0i0.3881
    • 2004
      • Communication de conférence
        Thomas, M., Lakis, A.A. & Archambault, R. (2004). A new technique to detect rolling element bearing faults: the Julien method. Communication présentée à 5th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2004). Dynamic behavior of composite non-uniform cylindrical shells conveying axial flow. Communication présentée à 7th International Conference on Computational Structures Technology, Lisbon, Portugal.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2004). Fluid-structure dynamics with a hybrid method. Communication présentée à 8th International Conference on Flow-Induced Vibrations (FIV 2004), Paris, France (p. 87-92).
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2004). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow. Communication présentée à 7th International Conference on Flow-Induced Vibrations (FIV 2004), Paris, France (p. 87-92).
      • Communication de conférence
        Mabrouki, F., Thomas, M. & Lakis, A.A. (2004). Improving the vibratory behaviour of a flexible plate using combined experimental measurements and finite element modelling. Communication présentée à 22nd Seminar on Machinery Vibration, Ottawa, Ontario (18 pages).
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2004). Large amplitude vibrations of anisotropic cylindrical shells. Communication présentée à 6th International Conference on Computational Structures Technology and 3rd International Conference on Engineering Computational Technology (CST/ECT 2002), Prague, Czech Republic. (Publié dans Computers & Structures, 82(23-26), 2015-2025). Tiré de https://doi.org/10.1016/j.compstruc.2003.07.007
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2004). Stability of composite non-uniform cylindrical tubes subjected to axial flow. Communication présentée à 7th International Conference on Computational Structures Technology, Lisbon, Portugal.
    • 2003
      • Communication de conférence
        Toorani, M.H., Lakis, A.A. & Gou, M. (2003). Hybrid finite element analysis of vibrations of anisotropic cylindrical shells conveying fluid. Communication présentée à 9th International Conference on Civil and Structural Engineering Computing, Egmond aan Zee, Netherlands. Tiré de https://doi.org/10.4203/ccp.77.75
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2003). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow. Communication présentée à 2nd WSEAS International Conference on Non-Linear Analysis, Non-Linear Systems and Chaos (WSEAS NOLASC 2003), Athens, Greece. (Publié dans WSEAS Transactions on Mathematics, 2(4), 247-258).
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2003). Hybrid finite element in non-linear structural dynamics of anisotropic tubes conveying axial flow. Communication présentée à 2nd WSEAS International Conference on Non-Linear Analysis, Non-Linear Systems and Chaos (NOLASC 2003), Athens, Greece (12 pages). Tiré de http://www.wseas.us/e-library/conferences/athens2003/papers/465-130.doc
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2003). Non-linear flow-induced vibrations of cylindrical tubes. Communication présentée à International Congress on Advanced Nuclear Power Plant (ICAPP 2003), Cordoba, Spain.
    • 2002
      • Communication de conférence
        Thomas, M. & Lakis, A.A. (2002). Detection of breathing crack by time-frequency analysis. Communication présentée à 30th International Conference on Computers & Industrial Engineering, Tinos Island, Greece (p. 905-910).
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2002). Dynamic and stability of anisotropic cylindrical shells conveying axial flow. Communication présentée à International Congress on Advances in Nuclear Power Plants (ICAPP 2002), Hollywood, FL, USA.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2002). Flow-induced vibration of anisotropic cylindrical shells. Communication présentée à 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, part of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana. Tiré de https://doi.org/10.1115/IMECE2002-39029
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2002). Hybrid finite element in vibrations of composite cylindrical shells. Communication présentée à 7th Conference of Shell Structures Theory and Applications (SSTA 2002), Warsaw, Poland.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2002). Non-linear fluid-structure interaction in cylindrical shells. Communication présentée à 10th International Conference on Nuclear Engineering (ICONE 10) (p. 797-808). Tiré de https://doi.org/10.1115/ICONE10-22776
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2002). Non-linear vibrations of anisotropic cylindrical shells. Communication présentée à 6th International Conference on Computational Structures Technology (ICCST 2002), Prague, Czech Republic (p. 191-192).
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2002). Rotating machinery fault diagnosis using time-frequency methods. Communication présentée à 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting, Québec, Québec.
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2002). Time-frequency algorithms and their applications. Communication présentée à EUROMECH Colloquium 437 : Identification and Updating Methods of Mechanical Structures, Prague, Czech Republic.
    • 2001
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2001). Dynamic analysis of anisotropic cylindrical shells containing flowing fluid. Communication présentée à Flow-Induced Vibration Conference, presented at the Pressure Vessels and Piping Conference (PVP 2001), Atlanta, Georgia.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2001). Vibration analysis of axisymmetric and beam-like cylindrical shells containing flowing fluid. Communication présentée à 9th International Conference on Nuclear Engineering (ICONE 2001), Nice, France.
    • 2000
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (2000). Diagnostic des machines par les méthodes temps-fréquence. Communication présentée à Annual Canadian Machinery Vibration Association Seminar, Montréal, Québec.
      • Communication de conférence
        Toorani, M.H., Lakis, A.A. & Amabili, M. (2000). Dynamic behavior of anisotropic shells including transverse shear deformation and rotary inertia effects. Communication présentée à 4th International Colloquium on Computation of Shell & Spatial Structures (IASS-IACM 2000), Chania, Greece (p. 118-125).
      • Communication de conférence
        Lakis, A.A., Païdoussis, M.P. & Dupuis, C. (2000). Dynamic stability of fluid-conveying cylindrical shells using a hybrid finite element approach. Communication présentée à 7th International Conference on Flow Induced Vibrations (FIV 2000), Lucerne, Switzerland (p. 343-348). Tiré de https://doi.org/10.1201/9781482283747-13
      • Communication de conférence
        Safizadeh, M.S. & Lakis, A.A. (2000). Machinery diagnosis by time-frequency analysis. Communication présentée à NSF Design and Manufacturing Research Conference, Vancouver, B. C.
      • Communication de conférence
        Lakis, A.A., Selmane, A. & Dupuis, C. (2000). Non-linear dynamic analysis of cylindrical shells subjected to a flowing fluid. Communication présentée à International Mechanical Engineering Congress and Exposition (IMECE 2000), Orlando, FL (8 pages). Tiré de https://doi.org/10.1115/IMECE2000-1003
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2000). Transverse shear deformation in dynamic behavior of anisotropic laminated piping subjected to a flowing fluid. Communication présentée à 8th International Conference on Nuclear Engineering (ICONE 2000), Baltimore, MD.
      • Communication de conférence
        Toorani, M.H. & Lakis, A.A. (2000). Vibration analysis of anisotropic laminated cylindrical shells filled with or subjected to a flowing fluid. Communication présentée à 4th International Conference of Iranian Society of Mechanical Engineers (ISME 2000), Teheran, Iran.
    • 1999
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Application of short-time Fourier transform in machine fault detection. Communication présentée à 12th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK (p. 125-130).
      • Communication de conférence
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Using short-time Fourier transform in machinery fault diagnosis. Communication présentée à International Conference and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1999), Sunderland, UK (p. 125-130).
      • Communication de conférence
        Smail, M., Thomas, M. & Lakis, A.A. (1999). Utilisation de la modélisation ARMA pour la détection de fissures dans les rotors. Communication présentée à 3rd Industrial Automation International Conference, Montréal, Québec (p. 21.1-21.4).
    • 1998
      • Communication de conférence
        Lakis, A.A. & Dupuis, C. (1998). A hybrid finite element method to study the dynamic stability of fluid-conveying cylindrical shells. Communication présentée à 6th Pan American Congress of Applied Mechanics, Rio de Janeiro, Brazil.
      • Communication de conférence
        Haulin, E.N., Lakis, A.A. & Vinet, R. (1998). Performance et optimisation d'un mécanisme à quatre membrures. Communication présentée à Canadian Society for Mechanical Engineering Forum, Toronto, Ont. (p. 492-498).
      • Communication de conférence
        Smail, M., Thomas, M. & Lakis, A.A. (1998). Use of ARMA modelization for faults detection in rotating machinery. Communication présentée à 3rd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques, Senlis, France.
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1998). Vibration analysis of circumferentially non-uniform cylindrical shells subjected to a flowing fluid. Communication présentée à 6th International Conference on Nuclear Engineering (ICONE 1998), San Diego, California.
    • 1997
      • Communication de conférence
        Selmane, A. & Lakis, A.A. (1997). Dynamic stability of orthotropic open and closed cylindrical shells subjected to a flowing fluid. Communication présentée à 5th Pan American Congress of Applied Mechanics (PACAM 1997), San Juan (p. 497-500).
      • Communication de conférence
        Lakis, A.A. & Neagu-Corneliu, S. (1997). Effects of free surface on the dynamic behavior of a cylindrical shell partially filled with liquid. Communication présentée à 4th ASME International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induces Vibration and Noise, Dallas, Texas (10 pages).
      • Communication de conférence
        Lakis, A.A. & Neagu, S. (1997). Free surface effects on the dynamics of cylindrical shells partially filled with liquid. Communication présentée à ASME International Mechanical Engineering Congress and Exposition (IMECE 1997), Dallas, TX, USA (p. 101-110). Tiré de https://doi.org/10.1115/IMECE1997-0102
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1997). Non linear dynamic analysis of orthotopic open and closed cylindrical shells subjected to a flowing fluid. Communication présentée à 5th International Conference on Nuclear Engineering (ICONE 1997), Nice, France.
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1997). Vibration analysis of circumferentially non-uniform cylindrical shells subjected to a flowing fluid. Communication présentée à 6th International Conference on Structural dynamics: Recent Advances, Southampton, UK (p. 249-262).
    • 1996
      • Communication de conférence
        Lakis, A.A., Selmane, A. & Toledano, A. (1996). Non-linear dynamic analysis of anisotropic cylindrical shells. Communication présentée à ASME Pressure Vessels and Piping Conference (PVP 1996), Montréal, Québec (p. 145-149).
    • 1995
      • Communication de conférence
        Archambault, R., Asotev, Y., Lakis, A.A. & Lavoie, D. (1995). Accurate determination of rolling-element bearing condition in aircraft engines. Communication présentée à 7th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 1995), Kingston, Ontario (10 pages).
      • Communication de conférence
        Lakis, A.A. (1995). Analysis of contact stresses on cylindrical vessels. Communication présentée à Contact Mechanics II, Ferrara, Italy (p. 10-19).
      • Communication de conférence
        Lakis, A.A., Selmane, A. & Archambault, R. (1995). Dynamic vibrations on anisotropic open cylindrical shells. Communication présentée à 2nd International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, Senlis, France (p. 175-186).
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1995). Non-linear free vibrations of anisotropic open cylindrical shells. Communication présentée à International Conference on Structural Dynamics, Vibration, Noise and Control (SDVNC 1995), Hong Kong (p. 604-609).
    • 1994
      • Communication de conférence
        Archambault, R., Barkov, A., Lakis, A.A. & Irwin, M. (1994). Optimization of rolling-element bearings usage through condition monitoring. Communication présentée à International Association of Science and Technology for Development Conference on Reliability Engineering & Its Applications, Honolulu, Hawaii.
    • 1993
      • Communication de conférence
        Lakis, A.A. & Archambault, R. (1993). Spatial correlation in fluid-structural coupling. Communication présentée à 4th International Congress on Intensity Techniques, Senlis, France.
    • 1992
      • Communication de conférence
        Archambault, R., Barkov, A., Lakis, A.A. & Irwin, M. (1992). Optimizing bearing life while minimizing the risk of failure through improved condition monitoring techniques and data management schemas baser superior discriminants analysis and operational reliability. Communication présentée à 4th International Machinery Monitoring and Diagnostic Conference, Houston, Texas.
    • 1991
      • Communication de conférence
        Lakis, A.A. & Laveau, A. (1991). Non linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. Communication présentée à Pressure Vessels and Piping Conference (PVP 1991), Nashville, TN.
    • 1990
      • Communication de conférence
        Lakis, A.A. (1990). Analysis of contact stresses on cylindrical vessels. Communication présentée à Contact loading and local effects in thin-walled plated and shell structures, Prague, Czechoslovakia (8 pages).
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1990). Analysis of non-uniform circular and annular plates. Communication présentée à International Conference Series on Advances in Numerical Methods in Engineering: Theory and Application (NUMETA 1990), Swansea, England (p. 239-248).
      • Communication de conférence
        Lakis, A.A. & Sinno, M. (1990). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid. Communication présentée à International Conference Series in Advances in Numerical Methods in Engineering: Theory and Application (NUMETA 1990), Swansea, England (10 pages).
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1990). Hybrid finite element analysis of non-uniform circular and annular plates. Communication présentée à International Conference on Structural Testing, Analysis and Design (ICSTAD 1990), Bangalore, India (p. 499-507).
    • 1989
      • Communication de conférence
        Lakis, A.A. & Selmane, A. (1989). Analyse dynamique des plaques circulaires non-uniformes. Communication présentée à 12e Congrès canadien de mécanique appliquée, Ottawa, Ontario (p. 364-365).
      • Communication de conférence
        Lakis, A.A. & Ouriche, H. (1989). Analysis of anisotropic conical shells. Communication présentée à 6th SAS World Conference on Structural Analysis and Optimization (FEMCAD 1989), Paris, France (6 pages).
      • Communication de conférence
        Lakis, A.A., Tuy, N.Q., Laveau, A. & Selmane, A. (1989). Analysis of axially non-uniform thin spherical shells. Communication présentée à International Symposium on Structural Analysis and Optimization (FEMCAD 1989), Paris, France (p. 80-84).
      • Communication de conférence
        Lakis, A.A., Laveau, A. & Selmane, A. (1989). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. Communication présentée à International Symposium on Structural Analysis and Optimization, Paris, France (p. 68-72).
    • 1986
      • Communication de conférence
        Lakis, A.A. (1986). Effect of random pressure fluctuations induced by turbulent flow. Communication présentée à 7th Brazilian Congress on Mechanical Engineering, Sao Paulo, Brazil.
      • Communication de conférence
        Lakis, A.A. (1986). Two phase parameters on highly turbulent bubbly flow in horizontal large channel. Communication présentée à 3rd International Symposium on Applications of Laser Anemometry to Fluid Mechanics, Lisbon, Portugal.
    • 1985
      • Communication de conférence
        Lakis, A.A. (1985). Prediction of shell response and wall-pressure fluctuations in turbulent single and two-phase flows. Communication présentée à 4th International Conference on Numerical Methods in Laminar and Turbulent Flows, Swansea, England (p. 1244-1255).
    • 1984
      • Communication de conférence
        Lakis, A.A. (1984). A hybrid finite element and classical shell theories: Advantages and limitations. Communication présentée à International Conference on Accuracy Estimates and Adaptative Refinements in Finite Element Computation, Lisbon, Portugal.
      • Communication de conférence
        Sami, S.M. & Lakis, A.A. (1984). Comparison of wall pressure fluctuations in turbulent single and two-phase flows. Communication présentée à 22nd National Heat Transfer Conference, Niagara Falls, N.Y. (p. 223-231).
    • 1983
      • Communication de conférence
        Lakis, A.A. (1983). Analysis of anisotropic shells containing flowing fluid. Communication présentée à 7th Brazilian Congress of Mechanicals Engineering, Uberlandia, Brazil (p. 547-562).
    • 1981
      • Communication de conférence
        Lakis, A.A. & Sami, S.M. (1981). Acquisition channel for phase and wall pressure prediction in turbulent two-phase flow. Communication présentée à 8e Colloque sur le traitement du signal et ses applications, Nice, France (12 pages).
      • Communication de conférence
        Lakis, A.A. (1981). Numerical and experimental analysis of cylindrical shell subjected to fully developed two-phase flow. Communication présentée à International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, England.
      • Communication de conférence
        Sami, S.M. & Lakis, A.A. (1981). Void prediction of two-phase flow in straight runs. Communication présentée à Advances in Flow Measurement Techniques Conference, London, England.
    • 1980
      • Communication de conférence
        Lakis, A.A., Sami, S.M. & Rousselet, J. (1980). Numerical analysis applications in turbulent dispersed two-phase flow. Communication présentée à 2nd International Symposium on Innovative Numerical Analysis for the Applied Engineering Sciences, Montréal, Québec (10 pages).
    • 1979
      • Communication de conférence
        Lakis, A.A. (1979). Analysis of anisotropic and non-uniform cylindrical shells. Communication présentée à 3rd National Congress on Pressure Vessel and Piping Division, San Francisco, California (12 pages).
      • Communication de conférence
        Lakis, A.A., Sami, S.M. & Rousselet, J. (1979). Phase and velocity distribution in turbulent dispersed two-phase flow. Communication présentée à 7th Canadian Congress of Applied Mechanics (CANCAM 1979), Sherbrooke, Québec.
      • Communication de conférence
        Lakis, A.A. & Mohamed, S.S. (1979). Pilot-tube measurements in fully developed turbulent dispersed flow. Communication présentée à 2nd Multi-Phase Flow and Heat Transfer Symposium, Miami, Florida (13 pages).
      • Communication de conférence
        Sami, S.M. & Lakis, A.A. (1979). Prediction of the velocity distribution in fully developed turbulent dispersed two-phase flow. Communication présentée à 25th International Symposium of the Instrumentation Society of America, California.
      • Communication de conférence
        Lakis, A.A. & Mohamed, S.S. (1979). Prediction of wall pressure fluctuations in turbulent dispersed flow. Communication présentée à 2nd Symposium on Turbulent Shear Flows, London, England.
    • 1978
      • Communication de conférence
        Lakis, A.A. (1978). Analysis of non-uniform anisotropic conical shell. Communication présentée à 8th U.S. National Congress on Applied Mechanics, Los Angeles, California.
      • Communication de conférence
        Lakis, A.A. (1978). Élément fini et théorie des coques. Communication présentée à 46e Congrès de l'Association canadienne française pour l'avancement des sciences, Ottawa, Ontario.
      • Communication de conférence
        Lakis, A.A. (1978). Numerical analysis of wall-pressure fluctuations in two-phase flow. Communication présentée à 5th International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, England (p. 757-767).
      • Communication de conférence
        Doré, R., Lakis, A.A. & Thieu, V.C. (1978). Optimal geometry of saddle supports for cylindrical vessels. Communication présentée à 2nd International Conference on Applied Numerical Modelling, Madrid, Spain (p. 12-25).
      • Communication de conférence
        Sami, S.M., Lakis, A.A. & Rousselet, J. (1978). Turbulent two-phase flow loop facility for predicting wall-pressure fluctuations and shell response. Communication présentée à 24th International Instrumentation Symposium, Pittsburgh, Pennsylvania (p. 267-274).
    • 1977
      • Communication de conférence
        Lakis, A.A. & Doré, R. (1977). Free vibration of anisotropic circular plate subjected to various boundary conditions. Communication présentée à 9th International Congress on Acoustics, Madrid, Spain (p. 312-314).
      • Communication de conférence
        Lakis, A.A. (1977). Numerical analysis of the response of cylindrical shell containing turbulent flowing fluid. Communication présentée à International Symposium on Innovative Numerical Analysis in Applied Engineering Science, France (p. 4.31-4.35).
    • 1976
      • Communication de conférence
        Lakis, A.A. (1976). Effects of fluid pressure on the vibration characteristics of cylindrical vessels. Communication présentée à International Conference on Pressure Surges, London, England (p. J1-J16).
      • Communication de conférence
        Lakis, A.A. (1976). Theoretical model of cylindrical structures containing turbulent flowing fluid. Communication présentée à 2nd International Symposium on Finite Element Methods in Flow Problems, Santa Margarita, Italy (p. 261-274).
    • 1975
      • Communication de conférence
        Lakis, A.A. & Khuong, T.V. (1975). Analysis of non-uniform anisotropic thin cylindrical shells. Communication présentée à 5th Canadian Congress of Applied Mechanics, Fredericton, N.B. (p. 279-280).
      • Communication de conférence
        Lakis, A.A. & Doré, R. (1975). Analysis of pressurized cylindrical vessel and its supports. Communication présentée à 2nd National Congress on Pressure Vessels and Piping, San Francisco, California (12 pages).
    • 1974
      • Communication de conférence
        Lakis, A.A. (1974). Dynamic analysis on non-uniform spherical shell. Communication présentée à 8th International Congress on Acoustics, London, England.
      • Communication de conférence
        Lakis, A.A. & Doré, R. (1974). Free vibration and response to random pressure field of anisotropic thin cylindrical shells. Communication présentée à Noise, Shock and Vibration Conference, Melbourne, Australia (p. 88-99).
      • Communication de conférence
        Lakis, A.A. (1974). Free vibration of non-uniform spherical shells subjected to various boundary conditions. Communication présentée à 8th International Congress on Acoustics, London, England.
      • Communication de conférence
        Lakis, A.A. & Païdoussis, M.P. (1974). Response of non-uniform cylindrical shell subjected to random pressure field. Communication présentée à 7th International Congress on Acoustics, Budapest, Hungary (p. 632-637).
  • Chapitres de livre (2)
    • 2011
      • Chapitre de livre
        Vu, V.H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2011). Spectrum and operational modal analysis with vector autoregressive models. Dans Mechanical Vibrations: Types, Testing and Analysis (p. 57-93). Nova Science.
    • 2004
      • Chapitre de livre
        Thomas, M., Lakis, A.A. & Sassi, S. (2004). A theoretical model for predicting adverse health effects of long-term whole-body random vibration exposure. Dans Recent research developments in sound and vibration (Vol. 2, p. 55-73). Transworld Research Network.
  • Rapports (70)
    • 2020
      • Rapport
        Ben Youssef, Y., Lakis, A.A. & Kerboua, Y. (2020). Développement d'une formulation pour l'étude du comportement dynamique non linéaire des coques cylindriques isotropes. Polytechnique Montréal. Tiré de https://publications.polymtl.ca/5321/
    • 2018
      • Rapport
        Bakhtiari, M., Lakis, A.A. & Kerboua, Y. (2018). Nonlinear vibration of truncated conical shells : Donnell, Sanders and Nemeth theories (Rapport n° EPM-RT-2018-01). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/3011/
    • 2013
      • Rapport
        Menaa, M. & Lakis, A.A. (2013). Hybrid finite element method applied to the analysis of free vibration of a spherical shell filled with fluid (Rapport n° EPM-RT-2013-04). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/2966/
      • Rapport
        Menaa, M. & Lakis, A.A. (2013). Hybrid finite element method applied to the analysis of free vibration of spherical shell (Rapport n° EPM-RT-2013-02). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/2800/
    • 2010
      • Rapport
        Komgom, N.C., Mureithi, N. & Lakis, A.A. (2010). Application of pattern analysis to condition monitoring of bearing. Projet CRIAG 1.18.
      • Rapport
        Oulmane, A., Lakis, A.A. & Mureithi, N. (2010). Monitoring of bearing PW100 #5 tested at National Research Center in Ottawa.
    • 2009
      • Rapport
        Esteve, A., Badri, B., Zagbani, I., Thomas, M. & Lakis, A.A. (2009). Les problèmes de vibration en UHV. ENSAM-ETS.
      • Rapport
        Esmailzadeh, M. & Lakis, A.A. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field (Rapport n° EPM-RT-2009-06). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/2648/
    • 2008
      • Rapport
        Maillot, A., Vu Viet, H., Lakis, A.A. & Marcouiller, L. (2008). Analyse modale d'une aube dans l'eau.
      • Rapport
        Badri, B., Thomas, M., Lakis, A.A. & Mureithi, N. (2008). Les vibrations en UHV. École de technologie supérieure.
      • Rapport
        Sghir, K.A., Thomas, M., Lakis, A.A. & Mureithi, N. (2008). Signaux d'une fraiseuse haute vitesse. École de technologie supérieure.
      • Rapport
        Komgom, N.C., Lakis, A.A. & Mureithi, N. (2008). Spécifications techniques du Laboratoire pour le projet CRIAQ 1.18.
      • Rapport
        Komgom, N.C. & Lakis, A.A. (2008). Technical requirements for bearing tests at Pratt & Whitney.
    • 2007
      • Rapport
        Komgom, N.C., Mureithi, N., Lakis, A.A. & Safizadeh, M.S. (2007). Analyse des signatures vibratoires de l'Ecospeed.
      • Rapport
        Ruban, T., Vu Viet, H., Thomas, M., Lakis, A.A. & Marcouiller, L. (2007). Conception des structures d'essais d'interaction fluide-structure. École de technologie supérieure.
      • Rapport
        Komgom, N.C., Mureithi, N., Roussier, B. & Lakis, A.A. (2007). Design of the experimental test rig for the analysis of vibration response of rotating machinery components. École Polytechnique de Montréal.
    • 2006
      • Rapport
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2006). Analyse dynamique des systèmes de plaques en interaction avec un fluide et applications (Rapport n° EPM-RT-2006-01). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/3149/
      • Rapport
        Merlet, S., Thomas, M., Lakis, A.A. & Marcouiller, L. (2006). Conception d'un banc d'essais pour modèles de turbines hydrauliques. École de technologie supérieure.
      • Rapport
        Komgom, N.C., Mureithi, N. & Lakis, A.A. (2006). Literature review of fault detection using support vector machines or artificial neural networks augmented by genetic aglorithms. École Polytechnique de Montréal.
      • Rapport
        Esmailzadeh, M., Lakis, A.A., Thomas, M. & Marcouiller, L. (2006). Three-dimensional modeling of curved structures partially or completely containing and/or submerged in fluid (Rapport n° EPM-RT-2006-06). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/3153/
      • Rapport
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2006). Vitesse critique induite par un écoulement potentiel sur un système de plaques (Rapport n° EPM-RT-2006-05). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/3152/
    • 2005
      • Rapport
        Kerboua, Y., Lakis, A.A., Thomas, M. & Marcouiller, L. (2005). Comportement dynamique des plaques rectangulaires submergées (Rapport n° EPM-RT-2005-05). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/3144/
    • 2003
      • Rapport
        Lakis, A.A. (2003). Étude comparative concernant la fiabilité et la sécurité des aéronefs de nouvelle génération de type monomoteur turbopropulsé versus les aéronefs bimoteurs à pistons et bimoteurs turbopropulsés à hélices (Rapport n° C.C.T.P2873). École Polytechnique de Montréal.
    • 2002
      • Rapport
        Toorani, M.H. & Lakis, A.A. (2002). Geometrically non-linear dynamics of anisotropic open cylindrical shells with a refined shell theory (Rapport n° EPM-RT-2001-07). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/9880/
    • 2001
      • Rapport
        Lakis, A.A. & Païdoussis, M.P. (2001). Non-uniform shell/flow vibration analysis for target plant (Rapport n° 110). Mitsubishi Heavy Industry (MHI).
    • 1999
      • Rapport
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Application of short-time fourier transform in machine fault detection (Rapport n° EPM-RT-99-05). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10176/
      • Rapport
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Condition monitoring and diagnostic of rotating machinery by means of wavelet transforms (Rapport n° EPM-RT-99-07). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10179/
      • Rapport
        Toorani, M.H. & Lakis, A.A. (1999). Effects of transverse shear deformation and rotary inertia on the general equations of anisotropic plates and shells (Rapport n° EPM-RT-99-03). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10190/
      • Rapport
        Toorani, M.H. & Lakis, A.A. (1999). Effects of transverse shear deformations on the free vibration of anisotropic open circular cylindrical shells (Rapport n° EPM-RT-99-04). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10193/
      • Rapport
        Toorani, M.H. & Lakis, A.A. (1999). Effects of transverse shear deformations on the free vibration on anisotropic open circular cylindrical shells (Rapport n° EPM-RT-99-04). École Polytechnique de Montréal.
      • Rapport
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Fault detection and identification using Wigner-Ville distribution (Rapport n° EPM-RT-99-06). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10194/
      • Rapport
        Charbonneau, E. & Lakis, A.A. (1999). Semi-analytical shape functions in the finite element analysis of rectangular plates (Rapport n° EPM-RT-99-19). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10019/
      • Rapport
        Safizadeh, M.S., Lakis, A.A. & Thomas, M. (1999). Time-frequency algorithm (Rapport n° EPM-RT-99-08). École Polytechnique de Montréal.
    • 1995
      • Rapport
        Selmane, A. & Lakis, A.A. (1995). Dynamic analysis of anisotropic open cylindrical shells (Rapport n° EPM-RT-95-10). Montréal: École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10187/
      • Rapport
        Lakis, A.A. & Selmane, A. (1995). Hybrid finite element analysis of circular and annular plates (Rapport n° EPM-RT-95-12). École Polytechnique de Montréal.
      • Rapport
        Selmane, A. & Lakis, A.A. (1995). Influence of geometric non-linearities on the free vibrations of anisotropic open cylindrical shells (Rapport n° EPM-RT-95-11). Montréal: École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10201/
      • Rapport
        Lakis, A.A., Selmane, A. & Toledano, A. (1995). Non-linear dynamic analysis of anisotropic cylindrical shells (Rapport n° EPM-RT-95-13). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10203/
      • Rapport
        Selmane, A. & Lakis, A.A. (1995). Vibration analysis of anisotropic open cylindrical shells containing flowing fluid (Rapport n° EPM-RT-95-09). Montréal: École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10209/
    • 1992
      • Rapport
        Lakis, A.A. (1992). A hybrid finite element and classical shells theories : advantage and limitations (Rapport n° EPM-RT-92-28). École Polytechnique de Montréal.
      • Rapport
        Lakis, A.A. (1992). Analysis of contact stresses on cylindrical vessels (Rapport n° EPM-RT-92-29). École Polytechnique.
      • Rapport
        Lakis, A.A., Archambault, R. & Selmane, A. (1992). Prediction of the response of a cylindrical shell to arbitrary random pressure fields (Rapport n° EPM-RT-92). École Polytechnique.
    • 1989
      • Rapport
        Lakis, A.A. & Selmane, A. (1989). Dynamic analysis of non-uniform circular plates (Rapport n° EPM-RT-89-04). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10189/
    • 1988
      • Rapport
        Lakis, A.A. & Van Dyke, P. (1988). Dynamic analysis of anisotropic cylindrical shells containing a flowing fluid (Rapport n° EPM-RT-88-12). École Polytechnique de Montréal.
      • Rapport
        Lakis, A.A. & Van Dyke, P. (1988). Dynamic Analysis of conical shells containing flowing fluid (Rapport n° EPM-RT-88-12). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10186/
      • Rapport
        Lakis, A.A. & Nguyen, Q.T. (1988). Dynamic analysis of spherical shells : a hybrid method (Rapport n° EPM-RT-88-23). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10188/
      • Rapport
        Lakis, A.A. & Nguyen, D.T. (1988). Liquid phase velocity of turbulent dispersed bubbles flow in large diameter horizontal pipes (Rapport n° EPM-RT-88-24). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10204/
      • Rapport
        Lakis, A.A. & Laveau, A. (1988). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid (Rapport n° EPM-RT-88-13). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10205/
      • Rapport
        Lakis, A.A. & Nguyen, D.T. (1988). Void fraction in highly turbulent and large diameter horizontal pipe flow (Rapport n° EPM-RT-88-28). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10210/
    • 1986
      • Rapport
        Lakis, A.A. & Boisnaud, P. (1986). Analysis of anisotropic thin conical shells (Rapport n° EPM-RT-86-38). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10177/
      • Rapport
        Lakis, A.A. & Ouriche, H. (1986). Dynamic analysis of anisotropic conical shells (Rapport n° EPM-RT-86-36). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10183/
      • Rapport
        Lakis, A.A. & Nguyen, D.T. (1986). Dynamic analysis of a Timoshenko beam using a finite element approach (Rapport n° EPM-RT-86-34). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10184/
      • Rapport
        Lakis, A.A. & Sinno, M. (1986). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid (Rapport n° EPM-RT-86-35). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10198/
      • Rapport
        Lakis, A.A. & Toledano, A. (1986). Non-linear analysis of cylindrical shells (Rapport n° EPM-RT-86-37). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10202/
    • 1985
      • Rapport
        Lakis, A.A. & Boisnaud, P. (1985). Analysis of anisotropic thin shells (Rapport n° EPM-RT-85-25). École Polytechnique.
      • Rapport
        Lakis, A.A. & Ouriche, H. (1985). Dynamic analysis anisotropic conical shells (Rapport n° EPM-RT-85-23). École Polytechnique de Montréal.
      • Rapport
        Lakis, A.A. & Trinh, N.D. (1985). Dynamic analysis of Timoshenko Beam using a finite element approach (Rapport n° EPM-RT-85-21). École Polytechnique de Montréal.
    • 1981
      • Rapport
        Lakis, A.A. & Sami, S.M. (1981). Developments of two-phase flow mixture velocities (Rapport n° EP-81-R-38). École Polytechnique.
      • Rapport
        Sami, S.M. & Lakis, A.A. (1981). Prediction of statistical properties of turbulent two-phase flow wall pressure fluctuations (Rapport n° EP-R-81-39). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10206/
      • Rapport
        Lakis, A.A. & Sami, S.M. (1981). Wall pressure fluctuations in turbulent water flows (Rapport n° EP-81-R-40). École Polytechnique.
    • 1980
      • Rapport
        Lakis, A.A. & Sami, S.M. (1980). Phase distribution in turbulent dispersed two-phase flow (Rapport n° EP-80-R-29). École Polytechnique.
      • Rapport
        Lakis, A.A. & Sami, S.M. (1980). Prediction of velocity characteristics in turbulent water flows (Rapport n° EP-80-R-29). École Polytechnique.
    • 1979
      • Rapport
        Lakis, A.A. (1979). Exploitation du système SICA (système informatique de contrôle d'apprentissage) (Rapport n° EP-79-R-27). École Polytechnique.
    • 1978
      • Rapport
        Lakis, A.A. & Sami, S.M. (1978). On the wall pressure fluctuations of turbulent two-phase flow (Rapport n° EP-78-R-42). École Polytechnique.
    • 1977
      • Rapport
        Lakis, A.A. (1977). Effects of internal and external flow on the vibration characteristics of anisotropic cylindrical shells (Rapport n° EP-R-77-11). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/6154/
      • Rapport
        Lakis, A.A. & Mohamed, S.S. (1977). Survey of cylindrical shell response and wall-pressure fluctuations (Rapport n° EP-R-77-41). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10208/
      • Rapport
        Lakis, A.A. & Mohamed, S.S. (1977). Survey of cylindrical shell response and wall pressure fluctuations (Rapport n° EP-77-R-41). École Polytechnique de Montréal.
    • 1975
      • Rapport
        Lakis, A.A. & Doré, R. (1975). General method for analysing contact stresses on cylindrical vessels (Rapport n° EP-R-75-30). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10197/
    • 1974
      • Rapport
        Lakis, A.A. & Doré, R. (1974). Displacements and stresses of pressurized : thin cylindrical vessels in contact with rigid supports (Rapport n° EP-R-74-56). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10182/
      • Rapport
        Lakis, A.A. & Doré, R. (1974). Dynamic analysis of anisotropic thin cylindrical shells subjected to boundary-layer-induced random pressure fields (Rapport n° EP-R-74-27). École Polytechnique de Montréal. Tiré de https://publications.polymtl.ca/10185/
    • 1972