Colombathanthri, P. K. A., Jomaa, W., & Chinniah, Y. A. (2025). Human-centered cyber-physical systems in manufacturing industry: a systematic search and review. The International Journal of Advanced Manufacturing Technology.
Répertoire des expertises
Jomaa, Walid

Répertoire des expertises
Jomaa, Walid
Répertoire des expertises
Publications par type
Article de revue (19)
Communication de conférence (19)
Livre
Chapitre de livre (1)
Brevet
Rapport
Thèse
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Walid Jomaa (39)
- Articles de revue (19)
- 2025
Article de revue Article de revue Jomaa, W., Lévesque, J., & Gakwaya, A. (2025). Optimization of Precision Boring Conditions to Enhance the Surface Integrity of a Landing Gear Component. Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum, 441, 29-37.
- 2024
Article de revue Souid, A., Jomaa, W., & Terres, M. A. (2024). Artificial neural network-based modelling and prediction of white layer formation during hard turning of steels. Materiaux & Techniques, 112(3), 304 (13 pages).Article de revue Slamani, M., Elhadi, A., Amroune, S., Arslane, M., Jomaa, W., Fouad, H., Châtelain, J.-F., & Jawaid, M. (2024). Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis. Heliyon, 10(17), e36925 (23 pages).
- 2020
Article de revue Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages.
- 2019
Article de revue Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157.Article de revue Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310.Article de revue Shnfir, M., Olufayo, O. A., Jomaa, W., & Songmene, V. (2019). Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials, 12(23), 3974 (21 pages).
- 2018
Article de revue Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions. International Journal of Advanced Manufacturing Technology, 96(9), 3747-3791.Article de revue Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel. International Journal of Advanced Manufacturing Technology, 94(5), 2457-2474.
- 2017
Article de revue Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2017). Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy. Journal of Manufacturing Processes, 26, 446-458.Article de revue Touazine, H., Akab, J., Jahazi, M., Tahan, A., Jomaa, W., & Bocher, P. (2017). Modeling of the microstructure alteration induced by hard turning of Inconel 718. International Journal of Advanced Manufacturing Technology, 93(9), 3705-3712.Article de revue Jomaa, W., Lévesque, J., Bocher, P., Divialle, A., & Gakwaya, A. (2017). Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis. International Journal of Advanced Manufacturing Technology, 91(1), 931-942.Article de revue Jomaa, W., Songmene, V., & Bocher, P. (2017). Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals. Machining Science and Technology, 21(3), 335-361.
- 2016
Article de revue Jomaa, W., Songmene, V., & Bocher, P. (2016). An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations. Journal of Materials Engineering and Performance, 25(3), 1010-1027.Article de revue Jomaa, W., Songmene, V., & Bocher, P. (2016). An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Materials and Manufacturing Processes, 31(7), 838-844.
- 2015
Article de revue Daoud, M., Jomaa, W., Chatelain, J. F., & Bouzid, A. (2015). A machining-based methodology to identify material constitutive law for finite element simulation. International Journal of Advanced Manufacturing Technology, 77(9), 2019-2033.
- 2014
Article de revue Jomaa, W., Songmene, V., & Bocher, P. (2014). Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials, 7(3), 1603-1624.
- 2011
Article de revue Jomaa, W., Ben Fredj, N., Zaghbani, I., & Songmene, V. (2011). Non-Conventional Turning of Hardened AISI D2 Tool Steel. International Journal of Advances in Machining and Forming Operations, 3(2), 93-126.
- 2025
- Communications de conférence (19)
- 2023
Communication de conférence Souid, A., Mbarek, Y., Jomaa, W., & Terres, M. A. (mars 2023). Optimization and Prediction of White Layer Thickness After Hard Turning [Communication écrite]. 6th International Tunisian Congress of Mechanics (CoTuMe 2023), Monastir, Tunisia.
- 2022
Communication de conférence Bechtold, J., Danjou, C., & Jomaa, W. (septembre 2022). Development of a STEP-NC - Enabled Interoperable and Open Architecture CNC Controller [Communication écrite]. IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) - Smart Manufacturing and Logistics Systems - Turning Ideas into Action, Gyeongju, South Korea.
- 2018
Communication de conférence Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (mai 2018). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Communication écrite]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Publié dans MATEC Web of Conferences, 165.
- 2017
Communication de conférence Jomaa, W., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2017). FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 [Communication écrite]. 9th International Congress on Precision Machining (ICPM 2017), Athènes, Grèce. Publié dans Solid State Phenomena, 261.
- 2016
Communication de conférence Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2016). Finite element analysis of serrated chip formation in machining of 7075-t651 aluminum alloy [Communication écrite]. International Mineral Processing Congress (IMPC 2016), Québec, Québec.Communication de conférence Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (juillet 2016). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Communication écrite]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic.
- 2014
Communication de conférence Jomaa, W., Songmene, V., & Bocher, P. (novembre 2014). Experimental and Numerical Investigation on High Speed Machining of aluminums AA6061-T6 and AA7075-T651 [Présentation]. Dans Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec.Communication de conférence Jomaa, W., Daoud, M., Songmene, V., Bocher, P., & Châtelain, J.-F. (novembre 2014). Identification and Validation of Marusich's Constitutive Law for Finite Element Modeling of High Speed Machining [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec (6 pages).Communication de conférence Daoud, M., Jomaa, W., Chatelain, J. F., Bouzid, A., & Songmene, V. (juin 2014). Identification of Material Constitutive Law Constants Using Machining Tests: A Response Surface Methodology Based Approach [Communication écrite]. 2014 International Conference on High Performance and Optimum Design of Structures and Materials (HPSM/OPTI 2014), Ostende, Belgique. Publié dans WIT Transactions on The Built Environment, 137.Communication de conférence Jomaa, W., Songmene, V., & Bocher, P. (novembre 2014). Material Behavior Modeling for High Speed Machining Simulation of 6061-T6 and 7075-T651 Aluminum Alloys [Affiche]. Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec.
- 2013
Communication de conférence Djebara, A., Jomaa, W., Bahloul, A., & Songmene, V. (mai 2013). Dust Emission During Dry Machining of Aeronautic Aluminum Alloys [Communication écrite]. 1st International Conference on Aeronautics Sciences (ICAS 2013), Oran, Algérie.Communication de conférence Jomaa, W., Songmene, V., & Bocher, P. (octobre 2013). Effect of high-speed machining on surface integrity of AA7075-T651 alloy [Communication écrite]. 12th International Aluminum Conference (INALCO 2013), Montréal, Québec.Communication de conférence Jomaa, W., Songmene, V., & Bocher, P. (octobre 2013). Effect of tool/workpiece interaction on the surface integrity of machined AA7075-t651 parts [Affiche]. Journées des Étudiants du Regal (JER 2013), Montréal, Québec.Communication de conférence Jomaa, W., Songmene, V., & Bocher, P. (octobre 2013). On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel [Communication écrite]. Materials Science and Technology Conference and Exhibition 2013 (MS&T 2013), Montréal, Québec, Canada.
- 2012
Communication de conférence Jomaa, W., Fredj, N. B., Songmene, V., Zaghbani, I., & Braham, C. (mai 2012). Hybrid machining versus hard turning-investigation on process induced residual stresses [Communication écrite]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
- 2011
Communication de conférence Jomaa, W., Zaghbani, I., Songmene, V., Boire, L. P. L., & Lehuy, H. (août 2011). Dry and Wet Machinability of Hardened Mould Steels [Communication écrite]. International Conference on Environmental Pollution and Remediation, Ottawa, Ontario (8 pages).Communication de conférence Zaghbani, I., Jomaa, W., Songmene, V., Boire, L. P. L., & Lehuy, H. (juillet 2011). Investigation on Tool Wear during Dry and Wet Machining of Hardened Mould Steels [Communication écrite]. International Workshop on Computational Mechanics, Materials and Engineering Applications (CMMEA 2011), Kunming, Chine. Publié dans International Journal of Civil Engineering and Building Materials, 2(3).
- 2009
Communication de conférence Bounichane, B., Jomaa, W., Guillemot, G., Fredj, N. B., & Bigerelle, M. (mai 2009). Caractérisation multi-échelle de l'usinabilité de l'acier AISI 304L [Communication écrite]. 21es Journées Internationales Francophones de Tribologie de l'Université de Technologie de Compiègne, Compiègne, France.
- 2007
Communication de conférence Jomaa, W., & Fredj, N. B. (mars 2007). Effet du tournage dur, usinage à chaud et usinage hybride sur l'usinabilité et l'intégrité des surfaces en acier 155CrMoV12 : étude comparative [Communication écrite]. 2nd International Congress design and modeling of mechanical systems (CMSM 2007), Monastir, Tunisie.
- 2023
- Chapitres de livre (1)
- 2019
Chapitre de livre Jomaa, W., Gakwaya, A., & Bocher, P. (2019). Modelling of Materials behavior in finite element simulation of machining processes: Identification techniques and challenges. Dans Markopoulos, A. P., & Davim, J. P. (édit.), Advanced Machining Processes: Innovative Modeling Techniques .
- 2019