Zhang, C., Wang, C.-S., Girard, M., Therriault, D., & Heuzey, M.-C. (2024). 3D printed protein/polysaccharide food simulant for dysphagia diet: Impact of cellulose nanocrystals. Food Hydrocolloids, 148(A), 109455 (15 pages).

Liétard, Y., Therriault, D., & Mélançon, D. (2024). Exploiting Geometric Frustration in Coupled von Mises Trusses to Program Multifunctional Mechanical Metamaterials. Advanced Engineering Materials.

Pierre, J., Verville, M., Chenier, G., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2024). Non-planar material-extrusion additive manufacturing of multifunctional sandwich structures using carbon-reinforced polyetheretherketone (PEEK). Additive Manufacturing, 84, 104124 (13 pages).

Baptista, J. C., Fotsing, É. R., Mardjono, J., Therriault, D., & Ross, A. (2023, May). Acoustic modelling of 3D-printed hybrid materials: a preliminary study [Paper]. NOISE-CON23, Grand Rapids, MI, USA. Published in NOISE-CON proceedings, 266(2).

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages.

Pierre, J., Chenier, G., Verville, M., Chauvette, J. F., Farahani, R., Piccirelli, N., & Therriault, D. (2023, July). Additive Manufacturing Of A Non-planar Multifunctional Sandwich Panel [Poster]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom.

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A 3D-printed Encapsulated Dual Wide-Band Dielectric Resonator Antenna with Beam Switching Capability. IEEE Open Journal of Antennas and Propagation, 4, 492-505.

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625.

Farahani, R. D., Lévesque, M., & Therriault, D. (2023). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages).

Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages).

Duchesne, O., Lessard, D., Therriault, D., & Gosselin, F. (2023, May). Design optimization and 3D printing of a sandwich panel for a lunar rover frame [Abstract]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Published in Progress in Canadian Mechanical Engineering, 3.

Hia, I. L., Snyder, A. D., Turicek, J. S., Blanc, F., Patrick, J. F., & Therriault, D. (2023). Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing. Composites Science and Technology, 232, 109850 (10 pages).

Arslan, D., Norton, E., Mihai, M., Lévesque, M., & Therriault, D. (2023, May). High-temperature thermoplastic composites reinforced with recycled carbon fibers and thermal black for Fused Filament Fabrication [Presentation]. In Thirty-Eight Polymer Processing Society Conference (PPS-38), St.Gallen, Switzerland.

Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239.

Le Gentil, T., Langot, J., Therriault, D., & Kerbrat, O. (2023, May). Identifying efficient solutions for additive manufacturing of short carbon-fiber reinforced polyamide 6 from energy and mechanical perspectives [Paper]. 30th CIRP Life Cycle Engineering Conference, New Brunswick, NJ. Published in Procedia CIRP, 116.

Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages.

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023, July). Mesoscale full-field measurements for 3D-printed composites under delamination [Presentation]. In 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom.

Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 109343 (19 pages).

Sosa-Rey, F., Vella, C., Lingua, A., Pierre, J., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Multiscale Fast Fourier Transform homogenization of additively manufactured fiber reinforced composites from component-wise description of morphology. Composites Science and Technology, 243, 110261 (16 pages).

Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages).

Chauvette, J.-F., Hia, I. L., Farahani, R. D., Plante, R., Piccirelli, N., & Therriault, D. (2023). Non-planar multinozzle additive manufacturing of thermoset composite microscaffold networks. Composites Part B: Engineering, 256, 110627 (11 pages).

Chauvette, J.-F., Hia, I. L., Pierre, J., Chenier, G., Farahani, R. D., Piccirelli, N., & Therriault, D. (2023). Non-Planar Multiprocess Additive Manufacturing of Multifunctional Composites. Advanced Materials Technologies, 8(17), 10 pages.

Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (2023). Performance of painted and non-painted non-woven nickel-coated carbon fibers for lightning strike protection of composite aircraft. Composites Part A: Applied Science and Manufacturing, 175, 107772 (11 pages).

Lampron, O., Therriault, D., & Lévesque, M. (2023). Phase-field modeling of fracture in fused filament fabricated thermoplastic parts and experimental validation. Engineering Fracture Mechanics, 292, 109667 (19 pages).

Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2023). Processing and properties of aqueous protein/polysaccharide mixture-based inks for additive manufacturing. Additive Manufacturing, 78, 103844 (12 pages).

Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Desautels, A., Lapalme, M., Sirois, F., & Therriault, D. (2023). Silver-based conductive coatings as lightning strike protection for composite aircraft. Results in Materials, 19, 10 pages.

Goffin, A., Lennox, M. D., Raphael, W., Therriault, D., & Tavares, J. R. (2023). The impacts of post-processing treatments done under reactive and non-reactive atmospheres on the densification of binder jetting parts. Canadian Journal of Chemical Engineering, 11 pages.

Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022, July). Additively manufactured thermally bistable structures [Paper]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada.

Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Hérard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages.

Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Gosselin, F., Zou, S., & Therriault, D. (2022, July). Bioinspired transparent impact-absorbing composite made with a fluid mechanical instability [Paper]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada.

Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445.

Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages).

Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages).

Le Gentil, T., Therriault, D., & Kerbrat, O. (2022, June). Energy efficiency-oriented decision-making for additive manufacturing with carbon-fibre-reinforced polyamide 12 [Paper]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.

Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages).

Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A., & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860.

Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (2022, June). In-situ full-field measurements for 3D printed composites under interlayer delamination [Paper]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages).

Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (2022, July). Multilayered microchannels for high absorption at different frequency ranges [Paper]. 28th International Congress on Sound and Vibration (ICSV 2022).

Tao, R., Granier, F., & Therriault, D. (2022). Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluid. Additive Manufacturing, 60, 103243 (11 pages).

Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages.

Rafiee, M., Granier, F., Tao, R., Bherer-Constant, A., Chenier, G., & Therriault, D. (2022). Multi-material, multi-Process, planar, and nonplanar additive manufacturing of piezoelectric devices. Advanced Engineering Materials, 24(10), 2200294 (9 pages).

Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report).

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report).

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report).

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Technical Report).

Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages).

Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645.

Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (2022, October). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Paper]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa.

Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297.

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). Supplementary material for 'In-situ full-field measurements for 3D printed polymers during mode I interface failure' [Dataset].

Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).

Therriault, D. (2021, September). Additive manufacturing of multifunctional and multimaterial composite structures [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Pierre, J., Iervolino, F., Chauvette, J.-F., Piccirelli, N., & Therriault, D. (2021, September). Additive manufacturing of polymer composite sandwich panels for acoustic applications [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Rafiee, M., Granier, F., & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11), 2100356.

Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages.

Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169.

Latko-Durałek, P., Santonja Soto, F., & Therriault, D. (2021, September). A safe green ink for solvent-cast 3D printing [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.

Piccirelli, N., Therriault, D., Otero Navas, I., Diouf Leiws, A., Iervolino, F., & Abderrafai, Y. (2021). Composition for additive manufacturing. [Composition pour fabrication additive]. (Patent Application no. CA3078975).

Therriault, D., & Farahani, R. D. (2021, November). Design of multifunctional composites and their advanced additive manufacturing [Paper]. Additive Fabrication of Composites (ADDFABCONF 2021).

Brzeski, D., Hia, I. L., Chauvette, J.-F., Farahani, R. D., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages.

Abderrafai, Y., Diouf Lewis, A., Pierre, J., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2021, September). 3D printing challenge of high processing temperature composite materials [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Dermanaki Farahani, R., Brzeski, D., Hia, I. L., Diouf Lewis, A., Piccirelli, N., & Therriault, D. (2021, September). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.

Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages).

Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021, September). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (2021, June). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Abstract]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada.

Lassus, A., Gancheva, T. P., Therriault, D., Potvin, M.-J., Favis, B. D., & Virgilio, N. (2021, September). High-Performance Thermoplastic Hybrid Systems for the Lunar Environment [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page).

Chauvette, J.-F., Brzeski, D., Hia, I. L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 102294 (11 pages).

Chauvette, J.-F., Brzeski, D., Hia, I. L., Dermanaki Farahani, R., Piccirelli, N., & Therriault, D. (2021, September). High-speed Non-planar Multinozzle Additive Manufacturing of Thermosetting Polymer Composites [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). In-situ full-field measurements for additively manufactured polymers undergoing delamination [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Hosseini Rad, S., Yanez Sanchez, S. I., Goffin, A., Schlachter, D., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2021, September). Mechanical improvement of green metallic parts printed by binder-jet 3D printing [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page).

Yanez Sanchez, S. I., Goffin, A., Schlachter, D., Hosseini Rad, S., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2021, September). Method for Evaluating Binder Performance for Three-Dimensional Printing [Abstract]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page).

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.

Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173.

Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (2021, August). Multilayer treatment for subwavelength and broad absorption [Paper]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA.

Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages).

Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report).

Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report).

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report).

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Technical Report).

Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Paper]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US.

Zou, S., Therriault, D., & Gosselin, F. (2021, September). Spider-web-inspired transparent impact-resistant composite [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).

Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).

Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Technical Report).

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2020, November). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Paper]. 7th Global Conference on Polymer and Composite Materials (PCM 2020).

Piccirelli, N., Bazin, B., Therriault, D., Lafrance, T., & Trudeau Lalonde, F. (2020). Extruder head for additive manufacturing, system and process for additive manufacturing. [Tête d'extrusion pour fabrication additive, système et procédé de fabrication additive]. (Patent no. CA3041017).

Rafiee, M., Farahani, R. D., & Therriault, D. (2020). Multi-Material 3D and 4D Printing: A Survey. Advanced Science Letters, 7(12), 1902307 (26 pages).

Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report).

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report).

Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report).

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Technical Report).

Zou, S., Therriault, D., & Gosselin, F. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11), 100240 (17 pages).

Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).

Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Technical Report).

Rajesh, P. S. M., Delaroa, C., Gagné, M., Sapieha, J.-E., Sirois, F., & Therriault, D. (2019). Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications. Materials Today Communications, 18, 206-212.

Cusson, E., Akbarzadeh, A. H., Therriault, D., & Rodrigue, D. (2019). Density graded polyethylene foams: Effect of processing conditions on mechanical properties. Cellular Polymers, 38(1-2), 3-14.

Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (2019, August). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Presentation]. In 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia.

Farahani, R. D., & Therriault, D. (2019, July). Design of multifunctional composites and their multi-material additive manufacturing [Abstract]. International Conference on Advances in Functional Materials, Washington, DC, United States.

Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019). Direct 3D printing of hybrid nanofiber-based nanocomposites for highly conductive and shape memory applications. ACS Applied Materials & Interfaces, 11(27), 24523-24532.

Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Patent Application no. US20190054536).

Therriault, D., & Farahani, R. D. (2019, August). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Presentation]. In 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia.

Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding [Dataset].

Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages.

Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (2019, July). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Paper]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.

Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377.

Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-material direct ink writing (DIW) for complex 3D metallic structures with removable supports. ACS Applied Materials & Interfaces, 11(8), 8499-8506.

Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Technical Report).

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report).

Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Technical Report).

Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Technical Report).

Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Patent Application no. US20190284423).

Chauvette, J.-F., Piccirelli, N., & Therriault, D. (2019, October). Rapid direct deposition of filled polymer on non-planar surface [Paper]. 30th International Conference on Adaptive Structures and Technologies (ICAST 2019), Montréal, Qc, Canada.

Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).

Therriault, D. (2018, January). Advanced additive manufacturing of multifunctional composites [Paper]. Gordon Research Conference, Symposium on Multifunctional materials (GRC 2018), Ventura, United States.

Farahani, R. D., & Therriault, D. (2018, October). Advanced additive manufacturing of multifunctional composites [Paper]. Society of Engineering Science (SES 2018), Madrid, Spain.

Niknam, H., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2018). Architected multi-directional functionally graded cellular plates. Materials and Design, 148, 188-202.

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages).

Rajesh, P. S. M., Sirois, F., & Therriault, D. (2018). Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Materials and Design, 139, 45-55.

Wu, Q., Zou, S., Gosselin, F., Therriault, D., & Heuzey, M.-C. (2018). 3D printing of a self-healing nanocomposite for stretchable sensors. Journal of Materials Chemistry C, 6(45), 12180-12186.

Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018, May). 3D printing of metallic structures from a green ink [Paper]. CSME International Congress, Toronto, Ontario, Canada.

Therriault, D., & Chizari, K. (2018). Electrically conductive ink for solvent-cast 3D printing. (Patent Application no. US20180022023).

Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269.

Zou, S., Therriault, D., & Gosselin, F. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), 9777-9785.

Cauchy, X., Sapieha, J.-E., & Therriault, D. (2018). Hybrid Carbon-Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity. Advanced Engineering Materials, 20(12).

Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467.

Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26.

Niknam, H., Akbarzadeh, H., Therriault, D., & Rodrigue, D. (2018, May). Mechanical Analysis Of Multi-Directional Functionally Graded Cellular Plates [Paper]. Canadian Society for Mechanical Engineering International Congress (CSME 2018), Toronto, ON, Canada. Published in Progress in Canadian Mechanical Engineering.

Che, H., Gagné, M., Rajesh, P. S. M., Sapieha, J.-E., Sirois, F., Therriault, D., & Yue, S. (2018). Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection. Journal of Materials Engineering and Performance, 27(10), 5205-5211.

Wu, Q., Therriault, D., & Heuzey, M.-C. (2018). Processing and properties of chitosan inks for 3D printing of hydrogel microstructures. ACS Biomaterials Science & Engineering, 4(7), 2643-2652.

Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482.

Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017, July). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (2017, October). 3D printing active piezoelectric sensors in a single step [Paper]. 8th New Mech, Boston, MA, USA.

Abderrafai, Y., Barthelat, F., & Therriault, D. (2017, July). 3D printing of bioinspired functionally graded composites [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Wu, Q., Heuzey, M.-C., & Therriault, D. (2017, July). 3D printing of chitosan-based nanocomposites for electronic applications [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M.-C. (2017). 3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth. Advanced Biosystems, 1(6), 1700058 (6 pages).

Gosselin, F., Zou, S., & Therriault, D. (2017, August). Failure mechanisms of instability-assisted 3D printed microstructured fibers [Paper]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China.

Zou, S., Zulkifli, H. Z., Therriault, D., & Gosselin, F. (2017, July). Failure mechanisms of poly(lactic acid) fibers featuring microstructured sacrificial bonds [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Zou, D., Therriault, D., & Gosselin, F. (2017, September). Finite element simulation of microstructured fibers with sacrificial bonds [Paper]. International conference in aerospace for young scientists (ICAYS 2017), Beijing, China.

Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials. (Patent Application no. CA2976782).

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2017, April). One-step piezoelectric sensors for smart textiles [Paper]. 15th Expo Hightex, Montréal, Québec.

Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842.

Aïssa, B., Nedil, M., Belaidi, A., Isaifan, R. J., Bentouaf, A., Fauteux, C., & Therriault, D. (2017). Photoluminescence quenching, structures, and photovoltaic properties of ZnO nanostructures decorated plasma grown single walled carbon nanotubes. Journal of Nanoparticle Research, 19(5), 8 pages.

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2017, July). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455.

Wei, H., Cauchy, X., Abderrafai, Y., Leng, J., & Therriault, D. (2017, July). Solvent-cast 3D printing of superior conductive hybrid particles based nanocomposites [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.

Cauchy, X., Sapieha, J.-E., & Therriault, D. (2017). Synthesis of highly conductive, uniformly silver coated carbon nanofibers by electroless deposition. ACS Applied Materials & Interfaces, 9(34), 29010-29020.

Abderrafai, Y., Barthelat, F., & Therriault, D. (2016, August). Design and 3D printing of polymer/ceramic composite structures [Poster]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.

Hughes, V., Tabiai, I., Chizari, K., & Therriault, D. (2016). 3D printable conductive nanocomposites of PLA and multi‑walled carbon nanotubes. Material Matters, 11(2), 61-63.

Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016). 3D printing of highly conductive nanocomposites for the functional optimization of liquid sensors. Small, 12(44), 6076-6082.

Therriault, D. (2016, February). 3D printing of multifunctional composites and polymers [Paper]. Gordon Research Conference, Symposium on Multifunctional materials, Ventura, USA.

Bodkhe, S., Gosselin, F., & Therriault, D. (2016, August). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Paper]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.

Farahani, R. D., Gagné, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199.

Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771.

Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2016, August). Three-dimensional direct-write printing of metallic microstructures [Poster]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.

Farahani, R. D., Dubé, M., & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), 5794-5821.

Therriault, D. (2015, November). Design of multifunctional composites and their use for the 3-D printing of microsystems [Abstract]. Composites at Lake Louise (CALL 2015), Lake Louise, AB, Canada (1 page).

Guo, S.-Z., Yang, X., Heuzey, M.-C., & Therriault, D. (2015). 3D printing of a multifunctional nanocomposite helical liquid sensor. Nanoscale, 7(15), 6451-6456.

Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2015, July). 3D printing of conductive nanocomposites for liquid sensor application [Paper]. 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark.

Bodkhe, S., & Therriault, D. (2015, October). 3D printing of nanocomposites for mechanical microsystems [Paper]. S.NET 2015 : From Nanotechnologies to Emerging Technologies Towards a Global Responsibility, Montréal, Qc, Canada.

Arguin, M., Sirois, F., & Therriault, D. (2015). Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites. Advanced Manufacturing: Polymer & Composites Science, 1(1), 16-25.

Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182.

Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680.

Rajesh, P. S. M., Gagne, M., Cauchy, X., Sapieha, J.-E., Sirois, F., & Therriault, D. (2015, July). Lightning protection of wet metalized polymer composites [Paper]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.

Najafi, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2015). Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal, 73, 455-465.

Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), 831-845.

Lanouette, A.-M., Potvin, M.-J., Martin, F., Houle, D., & Therriault, D. (2015). Residual mechanical properties of a carbon fibers/PEEK space robotic arm after simulated orbital debris impact. International Journal of Impact Engineering, 84, 78-87.

Bodkhe, S., Gosselin, F., & Therriault, D. (2015, July). Three-dimensional printing of polyvinylidene fluoride nanocomposites [Paper]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.

Chizari, K., & Therriault, D. (2014, November). Conductive filaments from CNTs/PLA composites [Poster]. ASME International Mechanical Engineering Congress & Exposition, Montréal, Québec.

Passieux, R., Therriault, D., & Gosselin, F. (2014, November). Creation of Sacrificial Bonds by Viscous Flow Instability [Paper]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec.

Lanouette, A. M., Potvin, M. J., Martin, F., Mondor, S., Houle, D., & Therriault, D. (2014, April). Experimental Evaluation of the Canadarm2 Residual Flexural Strength After an Orbital Debris Impact [Paper]. 13th European Conference on Spacecraft Structures, Materials & Environmental Testing, Braunschweig, Germany.

Chizari, K., & Therriault, D. (2014, August). Fabrication of Conductive Microfilaments and Liquid Sensor from CNTs/PLA Nanocomposites [Paper]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada.

Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650.

Cauchy, X., Sapieha, J.-E., & Therriault, D. (2014, September). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis [Paper]. 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states.

Cauchy, X., Sapieha, J.-E., & Therriault, D. (2014, October). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites [Paper]. Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida.

Talwar, B. S., Guo, S., Chizari, K., & Therriault, D. (2014, November). Investigation of carbon nanotubes mixing methods and functionalizations for electrically conductive polymer composites [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (5 pages).

Gagné, M., & Therriault, D. (2014). Lightning strike protection of composites. Progress in Aerospace Sciences, 64, 1-16.

Dermanaki-Farahani, R., Laberge Lebel, L., & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments (85).

Farahani, R. D., Laberge Lebel, L., & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5), 055020 (12 pages).

Guo, S., Heuzey, M.-C., & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150.

Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790.

Farahani, R. D., Chizari, K., & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), 10470-10485.

Lanouette, A.-M., Hill, J., Demers-Dussault, P., Laurin, J.-J., & Therriault, D. (2013, May). 3D printing of double KA band helical micro-antennas [Paper]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states.

Guerin, N., Lévesque, M., & Therriault, D. (2013, May). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Paper]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states.

Farahani, R. D., & Therriault, D. (2013, July). Electrical conductivity of hybrid/patterned nanocomposites films [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.

Arguin, M., Sirois, F., & Therriault, D. (2013, September). Electric field alignement of multi-wall carbon nanotubes in epoxy matrix in order to establish preferential current path flows [Paper]. Composites Week@Leuven, Leuven, Belgium.

Aissa, B., Hena-Zamal, H., Asgar-Khan, M., Haddad, E., Therriault, D., & Rosei, F. (2013, October). Fabrication of 3D micro-vascular network based carbon nanotube materials by the direct-write microfluidic infiltration approach for self healing applications [Paper]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec.

Aïssa, B., Nedil, M., Habib, M. A., Haddad, E., Jamroz, W., Therriault, D., Coulibaly, Y., & Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6), 063101 (5 pages).

Arguin, M., Sirois, F., & Therriault, D. (2013, July). Impact of carbon nanotubes on electrical conductivity of carbon fiber multiscale composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.

Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2013, September). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution [Paper]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states.

Chatel, T., Lévesque, M., & Therriault, D. (2013, May). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Paper]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec.

Aïssa, B., Therriault, D., Haddad, E., Jamroz, W., Tagziria, K., Loiseau, J., Higgins, A., Khan, M. A., & Hoa, S. V. (2013, June). Mitigating the effects of space debris on composite structures embedding self healing and carbon nanotube nanocomposite materials [Paper]. 4th International Conference on Self-Healing Materials, Ghent, Belgium.

Moussaddy, H., Therriault, D., & Lévesque, M. (2013, July). Modeling elastic properties of randomly oriented fiber composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.

Guo, S. Z., Heuzey, M.-C., & Therriault, D. (2013, July). Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502 (10 pages).

Aïssa, B., Therriault, D., Farahani, R. D., Laberge Lebel, L., & El Khakani, M. A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11), 115705 (8 pages).

Aïssa, B., Tabet, N., Nedil, M., Therriault, D., Rosei, F., & Nechache, R. (2012). Electromagnetic Energy Absorption Potential and Microwave Heating Capacity of Sic Thin Films in the 1-16 Ghz Frequency Range. Applied Surface Science, 258(14), 5482-5485.

Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225.

Therriault, D., Lewis, J. A., & White, S. R. (2012). Microcapillary networks. (Patent no. US8101139).

Gosselin, F., Therriault, D., & Lévesque, M. (2012, February). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Paper]. APS March Meeting, Boston, MA, USA.

Aïssa, B., Haddad, E., Jamroz, W., Hassani, S., Farahani, R. D., Merle, P. G., & Therriault, D. (2012). Micromechanical characterization of single-walled carbon nanotube reinforced ethylidene norbornene nanocomposites for self-healing applications. Smart Materials and Structures, 21(10), 105028.

Farahani, R. D., Lévesque, M., & Therriault, D. (2012, March). Nanocomposite materials in three-dimensional freestanding microsensors [Paper]. NanoQuebec, Montréal, Québec.

Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), 791-803.

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395.

Aïssa, B., Therriault, D., Haddad, E., & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, 1-17.

Moussaddy, H., Lévesque, M., & Therriault, D. (2011, June). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Paper]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France.

Aïssa, B., Haddad, E., Tagziria, K., Jamroz, W., Asgar-Khan, M., Hoa, S. V., Verreault, J., Higgins, A., & Therriault, D. (2011, September). Exploring self healing of CFRP laminates exposed to hypervelocity small pellets simulating space debris [Paper]. 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials, Montréal, QC, Canada.

Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (2011, November). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Paper]. MRS Fall Meeting 2011, Boston, MA, USA.

Assa, B., Nechache, R., Therriault, D., Rosei, F., & Nedil, M. (2011). High-frequency electromagnetic properties of epitaxial Bi 2FeCrO6 thin films grown by pulsed laser deposition. Applied Physics Letters, 99(18).

Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011, September). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.

Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919.

Laberge Lebel, L., & Therriault, D. (2011). Multiscale manufacturing of three-dimensional polymer-based nanocomposite structures. In Boreddy, R. (ed.), Advances in Diverse Industrial Applications of Nanocomposites (pp. 409-428).

Aïssa, B., Therriault, D., & El Khakani, M. A. (2011). On-substrate growth of single-walled carbon nanotube networks by an "all-laser" processing route. Carbon, 49(8), 2795-2808.

Kruzelecky, R. V., Aïssa, B., Wong, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I. D., Hoa, S. V., Therriault, D., Ellery, A., Martel, S., & Jiang, X.-X. (2011, July). Project MoonDust: Characterization and Mitigation of Lunar Dust [Paper]. 41st International Conference on Environmental Systems, Portland, Oregon.

Habib, M., El Khakani, M., Aïssa, B., Denidni, T., Laberge Lebel, L., & Therriault, D. (2011). Super-high-frequency shielding properties of excimer-laser-synthesized-single-wall-carbon-nanotubes/polyurethane nanocomposite films. Journal of Applied Physics, 109(8).

Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011, September). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.

Lévesque, M., Bui-Quoc, T., & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens. (Technical Report).

Farahani, R., Dalir, H., Lévesque, M., & Therriault, D. (2010, November). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada.

Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2010, November). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Paper]. MRS Fall Meeting, Boston, MA. Published in MRS Proceedings, 1312.

Kruzelecky, R., Wong, B., Aïssa, B., Haddad, E., Jamroz, W., Cloutis, E., Rosca, I., Hoa, S., Therriault, D., & Ellery, A. (2010, July). MoonDust Lunar Dust Simulation and Mitigation [Paper]. 40th International Conference on Environmental Systems, Barcelona, Spain.

Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), 518-524.

Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2010). Single-chamber micro solid oxide fuel cells: Study of anode and cathode materials in coplanar electrode design. Solid State Ionics, 181(5-7), 332-337.

Lévesque, M., Bui-Quoc, T., Therriault, D., & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US. (Technical Report).

Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2010). Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils. Advanced Materials, 22(5), 592-596.

Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). A microfluidic packaging technique for lab-on-chip applications. IEEE Transactions on Advanced Packaging, 32(2), 410-416.

Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2009). CMOS based capacitive sensor laboratory-on-chip: A multidisciplinary approach. Analog Integrated Circuits and Signal Processing, 59(1), 1-12.

Lourdel, N., Therriault, D., & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017 (7 pages).

Fauteux, C., Khakani, M. A. E., Pegna, J., & Therriault, D. (2009). Influence of solution parameters for the fast growth of ZnO nanostructures by laser-induced chemical liquid deposition. Applied Physics A, 94(4), 819-829.

Laberge Lebel, L., Therriault, D., El-Khakani, M. A., & Aissa, B. (2009). Methods for preparing freeform three-dimensional structures. (Patent Application no. US20090101278).

Kuhn, M., Napporn, T. W., Meunier, M., Vengallatore, S., & Therriault, D. (2009). Miniaturization limits for single-chamber micro-solid oxide fuel cells with coplanar electrodes. Journal of Power Sources, 194(2), 941-949.

Aïssa, B., Fauteux, C., Khakani, M. A. E., & Therriault, D. (2009). Structural and photoluminescence properties of laser processed ZnO/carbon nanotube nanohybrids. Journal of Materials Research, 24(11), 3313-3320.

Laberge Lebel, L., Aïssa, B., Paez, O. A., El Khakani, M. A., & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12), 125009.

Laberge Lebel, L., Aissa, B., Khakani, M. A. E., & Therriault, D. (2009, April). Ultraviolet-assisted direct-write fabrication of three-dimensional microstructures [Paper]. MRS Spring Meeting, Boston, MA, USA.

Kuhn, M., Rao, R. B., & Therriault, D. (2009, April). Viscoelastic inks for direct-write microfabrication of single-chamber micro solid oxide fuel cells with coplanar thick electrodes [Paper]. Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography, San Francicso, CA, United states.

Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M., & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12), 7636-7648.

Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2008). Direct-Write Microfabrication of Single-Chamber Micro Solid Oxide Fuel Cells. Journal of Micromechanics and Microengineering, 18(1), 015005.

Hajj-Hassan, M., Gonzalez, T., Djeghelian, H., Ghafar-Zadeh, E., Therriault, D., Chodavarapu, V., & Andrews, M. (2008, January). Direct-write patterning of nanostructured sensory waveguides for integrated optical bioimaging applications [Paper]. Nanoscale Imaging, Sensing, and Actuation for Biomedical Applications V, San Jose, CA, United states.

Kuhn, M., Napporn, T. W., Meunier, M., & Therriault, D. (2008). Experimental Study of Current Collection in Single-Chamber Micro Solid Oxide Fuel Cells With Comblike Electrodes. Journal of The Electrochemical Society, 155(10), B994-B1000.

Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2008). Fabrication and Testing of Coplanar Single-Chamber Micro Solid Oxide Fuel Cells With Geometrically Complex Electrodes. Journal of Power Sources, 177(1), 148-153.

Fauteux, C., Smirani, R., Pegna, J., El Khakani, M. A., & Therriault, D. (2008, May). Fast synthesis of ZnO nanostructures by laser-induced chemical liquid deposition [Paper]. European Material Research Society Spring Meeting 2008 - Symposium B: Laser and Plasma in Micro- and Nano-Scale Materials Processing and Diagnostics, Strasbourg, France. Published in Applied Surface Science, 255(10).

Bey-Oueslati, R., Palm, S. J., Therriault, D., & Martel, S. (2008). High speed direct-write for rapid fabrication of three-dimensional microfluidic devices. International Journal of Heat and Technology, 26(1), 125-131.

Ghafar-Zadeh, E., Sawan, M., Therriault, D., & Miled, A. (2008). Laboratoires-sur-puces: Une nouvelle technologie de diagnostic cellulaire et moléculaire.

Longtin, R., Fauteux, C., Carignan, L. P., Therriault, D., & Pegna, J. (2008). Laser-Assisted Synthesis of Carbon Nanofibers: From Arrays to Thin Films and Coatings. Surface and Coatings Technology, 202(12), 2661-2669.

Bruneaux, J., Therriault, D., & Heuzey, M.-C. (2008). Micro-Extrusion of Organic Inks for Direct-Write Assembly. Journal of Micromechanics and Microengineering, 18(11), 115020-115020.

Oueslati, R. B., Therriault, D., & Martel, S. (2008). PCB-Integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated With the Direct-Write Method. IEEE Transactions on Components and Packaging Technologies, 31(4), 869-874.

Laberge-Label, L., Aissa, B., El Khnakani, M. A., & Therriault, D. (2008, July). Single-walled carbon nanotubes/polymer nanocomposites microbeams by Means of ultraviolet-assisted direct-write assembly [Paper]. 7th Joint Canada-Japan Workshop on Composites, Kanagawa, Japan.

Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2007, August). Direct-write microfabrication and testing of solid oxide micro fuel cells [Paper]. 13th Canadian Semiconductor Technology Conference, Montréal, Québec.

Laberge Lebel, L., Aissa, B., ElKhakani, M. A., & Therriault, D. (2007, November). 3D reinforced SWCNT-polymer nanocomposite beams by means of microfluidic infiltration [Paper]. MRS Fall Meeting, Boston, Ma..

Kuhn, M., Napportn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2007, April). Fabrication and characterization of single-chamber micro-solid oxide fuel cells with interdigitated electrodes [Paper]. Hydrogen and Fuel Cells 2007 : International Conference and Trade Show, Vancouver, BC.

Fauteux, C., Longtin, R., Pegna, J., & Therriault, D. (2007). Fast Synthesis of ZnO Nanostructures by Laser-Induced Decomposition of Zinc Acetylacetonate. Inorganic Chemistry, 46(26), 11036-11047.

Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2007). Novel Direct-Write Cmos-Based Laboratory-on-Chip: Design, Assembly and Experimental Results. Sensors and Actuators A: Physical, 134(1), 27-36.

Therriault, D., White, S. R., & Lewis, J. A. (2007). Rheological behavior of fugitive organic inks for direct-write assembly. Applied Rheology, 17(1), 10112-10121.

Longtin, R., Carignan, L. P., Fauteux, C., Therriault, D., & Pegna, J. (2007). Selective Area Synthesis of Aligned Carbon Nanofibers by Laser-Assisted Catalytic Chemical Vapor Deposition. Diamond and Related Materials, 16(8), 1541-1549.

Kuhn, M., Napportn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2007, November). Single-chamber solid-oxide micro fuel cells with geometrically-complex electrodes [Paper]. MRS Fall Meeting, Boston, Ma..

Laberge Lebel, L., Aissa, B., El Khakani, M. A., & Therriault, D. (2007, October). Three-dimensional (3D) microstructures of SWCNT-polymer nanocomposites by means of UV-assisted direct-writing [Paper]. Polymer nanocomposites 2007, Montréal, Québec.

Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (2007, December). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach [Paper]. Crepec 2007, Montréal, Québec.

Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2006, May). Direct-write CMOS-based Laboratory-On-Chip [Paper]. NSTI Nanotechnology Conference and Trade Show (NSTI Nanotech 2006), Boston, USA.

Kuhn, M., Napporn, T., Meunier, M., Therriault, D., & Vengallatore, S. (2006, November). Direct-Write Microfabrication of Single-Chamber Solid Oxide Fuel Cells with Interdigitated Electrodes [Paper]. MRS Fall Meeting, Boston, Ma..

Palm, S., Bey-Oueslati, R., Martel, S., & Therriault, D. (2006, December). Fabrication de microcaloducs à section triangulaire par écriture directe [Paper]. 3rd Microfluidics French Conference (Microfluidics 2006), Toulouse, France.

Bey-Oueslati, R., Palm, S., Therriault, D., & Martel, S. (2006, December). High-speed direct-write for rapid fabrication of three-dimensional microfluidic devices [Paper]. 3rd Microfluidics French Conference, Toulouse, France.

Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2006, October). Microelectrofluidic packaging for CMOS based laboratory-on-chips [Paper]. International Electronics Packaging Symposium, Nyskayuna, N.Y..

Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., & Therriault, D. (2006, May). Microfabrication de piles SOFC à chambre unique par écriture directe [Paper]. 74e Congrès de l'ACFAS, Montréal, Québec.