Salas-Papayanopolos, H., Morales-Cepeda, A.B., Wood-Adams, P., Sanchez, S., Lafleur, P.G. & Vazquez, H.P. (2022). Crystallization effect of poly(L-lactic acid)/silver nanocomposites blends, on barrier and mechanical properties using glyceryl triacetate as plasticizer. Polymer Bulletin, 18 pages. Retrieved from https://doi.org/10.1007/s00289-022-04309-9
Directory of Experts
Lafleur, Pierre
Directory of Experts
Lafleur, Pierre
Directory of Experts
Publications by type
Journal article (83)
Conference paper (26)
Book (2)
Book chapter
Patent
Report
Thesis
Dataset
Teaching resource
Image
Audio recording
Video recording
Other
Pierre Lafleur (111)
- Journal articles (83)
- 2022
Journal article Journal article Torres-Castillo, C.S., Fuentes-Agustín, J.E., García-Reyes, E.M., Zamudio-Aguilar, M.A.M., Morales-Zamudio, L., Lozano, T., Navarro-Pardo, F., Sanchez-Valdez, S., Martinez-Colunga, G., Karami, S. & Lafleur, P. (2022). Effect of non-functionalized and functionalized graphene oxide with a silane agent on the thermal and rheological properties of nylon 6,6. Iranian Polymer Journal, 11 pages. Retrieved from https://doi.org/10.1007/s13726-022-01110-3
- 2020
Journal article Castillo, J., Lozano, T., Garcia, R., Morales-Zamudio, L., Lopez-Barroso, J., Lafleur, P.G., Karami, S., Sanchez-Valdes, S., Martinez-Colunga, G., Rodriguez, F., Perez-Berumen, C., Flores, S. & Garcia, A. (2020). Influence of graphene-based compounds on the mechanical toughness and thermal stability of polypropylene. Journal of Applied Polymer Science, 137(10), 13 pages. Retrieved from https://doi.org/10.1002/app.48258
- 2018
Journal article Ponce-Medina, M.E., Sánchez-Valdés, S., Martin, M.E.Á.-S., Papayanopolos, H.S., Hernández- Hernández, D.E., Lozano-Ramírez, T., Karami, S., LaFleur, P. & Morales-Cepeda, A.B. (2018). Composites of Polypropylene/Candelilla fiber (Euphorbia antisyphilitica): Synergic of wax-polypropylene grafted Maleic Anhydride. Cogent Engineering, 5(1), 14 pages. Retrieved from https://doi.org/10.1080/23311916.2018.1526861Journal article Martinez-Colunga, J.G., Sanchez-Valdes, S., Blanco-Cardenas, A., Ramirez-Vargas, E., Ramos-de Valle, L.F., Benavides-Cantu, R., Espinoza-Martinez, A.B., Sanchez-Lopez, S., Lozano-Ramirez, T., Lafleur, P.G. & Karami, S. (2018). Dispersion and exfoliation of nanoclays in itaconic acid func[t]ionalized LDPE by ultrasound treatment. Journal of Applied Polymer Science, 135(20), 10 pages. Retrieved from https://doi.org/10.1002/app.46260Journal article Bautista-Del-Ángel, J.E., Morales-Cepeda, A.B., Lozano-Ramírez, T., Sanchez, S., Karami, S. & Lafleur, P. (2018). Enhancement of crystallinity and toughness of poly (L-lactic acid) influenced by Ag nanoparticles processed by twin screw extruder. Polymer Composites, 39(7), 2368-2376. Retrieved from https://doi.org/10.1002/pc.24217Journal article Munoz-Avila, J.M., Sanchez-Valdes, S., Yanez-Flores, I., Rodriguez-Fernandez, O.S., Neira-Velazquez, M.G., Hernandez-Hernandez, E., Flores-Gallardo, S., Avalos-Belmontes, F., Lozano-Ramirez, T., Morales-Cepeda, A. & Lafleur, P.G. (2018). Influence of carbon nanofiber functionalization and compatibilizer on the physical properties of carbon nanofiber reinforced polypropylene nanocomposites. Polymer Composites, 39(10), 3575-3585. Retrieved from https://doi.org/10.1002/pc.24380Journal article Sanchez-Valdes, S., Zapata-Dominguez, A.G., Martinez-Colunga, J.G., Mendez-Nonell, J., de Valle, L.F.R., Espinoza-Martinez, A.B., Morales-Cepeda, A., Lozano-Ramirez, T., Lafleur, P.G. & Ramirez-Vargas, E. (2018). Influence of functionalized polypropylene on polypropylene/graphene oxide nanocomposite properties. Polymer Composites, 39(4), 1361-1369. Retrieved from https://doi.org/10.1002/pc.24077Journal article Sanchez-Valdes, S., Zapata-Dominguez, A.G., Graciano-Verdugo, A.Z., Ramos de Valle, L.F., Morales-Cepeda, A., Ramirez-Vargas, E., Rodriguez-Fernandez, O.S., Lozano-Ramirez, T., Flores-Gallardo, S., Espinoza-Martinez, A.B., Mendez-Nonell, J., Lafleur, P.G. & Karami, S. (2018). Influence of modified polyethylene compatibilizer on filler dispersion and flammability characteristics of linear low density polyethylene/cyclo olefin copolymer blends containing flame retardant combinations. Journal of Adhesion Science and Technology, 32(14), 1560-1577. Retrieved from https://doi.org/10.1080/01694243.2018.1430977
- 2017
Journal article Camacho, P.H., Morales-Cepeda, A.B., Salas-Papayanopolos, H., Bautista, J.E., Castro, C., Lozano, T., Sanchez-Valdes, S. & Lafleur, P.G. (2017). Crystallization behavior of polypropylene/silver nanocomposites using polyethylene glycol as reducing agent and interface modifier. Journal of Thermoplastic Composite Materials, 30(5), 662-677. Retrieved from https://doi.org/10.1177/0892705715610404Journal article Karami, S. & Lafleur, P.G. (2017). Effect of strain-induced molecular ordering on mechanical performance and barrier properties of polylactide nanocomposites. Journal of Polymer Science, Part B: Polymer Physics, 55(24), 1865-1876. Retrieved from https://doi.org/10.1002/polb.24516Journal article Hernandez, Y., Lozano, T., Morales, A.B., Navarro-Pardo, F., Lafleur, P.G., Sanchez-Valdes, S., Martinez-Colunga, G., Morales-Zamudio, L. & de Lira-Gomez, P. (2017). Improvement of toughness properties of polypropylene filled with nanobentonite using stearic acid as interface modifier. Journal of Composite Materials, 51(3), 373-380. Retrieved from https://doi.org/10.1177/0021998316644852Journal article Bautista-Del-Ángel, J., Morales-Cepeda, A.B., Lozano-Ramírez, T., Sanchez, S., Karami, S. & Lafleur, P. (2017). Mechanical and crystal enhancements to polylactide with silver-nanoparticle filler. Plastics Research online, 3 pages. Retrieved from https://doi.org/10.2417/spepro.006810Journal article Salas-Papayanopolos, H., Morales-Cepeda, A., Sanchez, S., Lafleur, P.G. & Gomez, I. (2017). Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(L-lactic acid)/glycerol triacetate blends. Polymer Bulletin, 74(12), 4799-4814. Retrieved from https://doi.org/10.1007/s00289-017-1992-4
- 2016
Journal article Karami, S. & Lafleur, P.G. (2016). Toughening of polylactide nanocomposites with an ethylene alkyl acrylate copolymer: Effects of the addition of nanoparticles on phase morphology and fracture mechanisms. Polymer Engineering & Science, 56(12), 1415-1424. Retrieved from https://doi.org/10.1002/pen.24377
- 2015
Journal article Perez-Rocha, D., Morales-Cepeda, A.B., Navarro-Pardo, F., Lozano-Ramirez, T. & LaFleur, P.G. (2015). Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding. International Journal of Polymer Science, 2015, 8 pages. Retrieved from https://doi.org/10.1155/2015/493206Journal article Nouri, S., Dubois, C. & Lafleur, P.G. (2015). Effect of chemical and physical branching on rheological behavior of polylactide. Journal of Rheology, 59(4), 1045-1063. Retrieved from https://doi.org/10.1122/1.4922486Journal article Nouri, S., Lafleur, P.G. & Dubois, C. (2015). Enhanced film blowing of polylactide by incorporating branched chains and stereocomplex crystals. International Polymer Processing, 30(4), 500-510. Retrieved from https://doi.org/10.3139/217.3080Journal article Nouri, S., Dubois, C. & Lafleur, P.G. (2015). Homocrystal and stereocomplex formation behavior of polylactides with different branched structures. Polymer (United Kingdom), 67, 227-239. Retrieved from https://doi.org/10.1016/j.polymer.2015.04.065Journal article Del Angel, C., Morales, A.B., Navarro-Pardo, F., Lozano, T., Lafleur, P.G., Sanchez-Valdes, S., Martinez-Colunga, G., Ramirez-Vargas, E., Alonso, S. & Zitzumbo, R. (2015). Mechanical and rheological properties of polypropylene/bentonite composites with stearic acid as an interface modifier. Journal of Applied Polymer Science, 132(30). Retrieved from https://doi.org/10.1002/app.42264Journal article Morales-Cepeda, A.B., Ponce-Medina, M.E., Salas-Papayanopolos, H., Lozano, T., Zamudio, M. & Lafleur, P.G. (2015). Preparation and characterization of candelilla fiber (Euphorbia antisyphilitica) and its reinforcing effect in polypropylene composites. Cellulose, 22(6), 3839-3849. Retrieved from https://doi.org/10.1007/s10570-015-0776-yJournal article Karami, S. & Lafleur, P.G. (2015). Role of chain dynamics and topological confinements in cold crystallization of PLA-clay nanocomposites. Polymer Engineering and Science, 55(6), 1310-1320. Retrieved from https://doi.org/10.1002/pen.24070Journal article Nouri, S., Dubois, C. & Lafleur, P.G. (2015). Synthesis and characterization of polylactides with different branched architectures. Journal of Polymer Science, Part B: Polymer Physics, 53(7), 522-531. Retrieved from https://doi.org/10.1002/polb.23665Journal article Behrang, A., Grmela, M., Dubois, C., Turenne, S. & Lafleur, P.G. (2015). Temperature dependence of thermal conductivity in hybrid nanodispersions. RSC Advances, 5(4), 2768-2776. Retrieved from https://doi.org/10.1039/c4ra12368a
- 2014
Journal article Behrang, A., Grmela, M., Dubois, C., Turenne, S., Lafleur, P.G. & Lebon, G. (2014). Effective heat conduction in dispersion of wires. Applied Physics Letters, 104(6), 063106. Retrieved from https://doi.org/10.1063/1.4865093Journal article Behrang, A., Grmela, M., Dubois, C., Lafleur, P.G., Lebon, G. & Turenne, S. (2014). Effective heat conduction in hybrid sphere & wire nanodispersions. Applied Physics Letters, 104(23), 233111. Retrieved from https://doi.org/10.1063/1.4882279Journal article Lujan-Acosta, R., Sanchez-Valdes, S., Ramirez-Vargas, E., Ramos-DeValle, L.F., Espinoza-Martinez, A.B., Rodriguez-Fernandez, O.S., Lozano-Ramirez, T. & Lafleur, P.G. (2014). Effect of Amino alcohol functionalized polyethylene as compatibilizer for LDPE/EVA/clay/flame-retardant nanocomposites. Materials Chemistry and Physics, 146(3), 437-445. Retrieved from https://doi.org/10.1016/j.matchemphys.2014.03.050Journal article Gonzalez, L., Lafleur, P., Lozano, T., Morales, A.B., Garcia, R., Angeles, M., Rodriguez, F. & Sanchez, S. (2014). Mechanical and thermal properties of polypropylene/montmorillonite nanocomposites using stearic acid as both an interface and a clay surface modifier. Polymer Composites, 35(1), 1-9. Retrieved from https://doi.org/10.1002/pc.22627Journal article Martinez-Colunga, J.G., Sanchez-Valdes, S., Ramos-Devalle, L.F., Munoz-Jimenez, L., Ramirez-Vargas, E., Ibarra-Alonso, M.C., Lozano-Ramirez, T. & Lafleur, P.G. (2014). Simultaneous polypropylene functionalization and nanoclay dispersion in PP/Clay nanocomposites using ultrasound. Journal of Applied Polymer Science, 131(16). Retrieved from https://doi.org/10.1002/app.40631
- 2013
Journal article Behrang, A., Grmela, M., Dubois, C., Turenne, S. & Lafleur, P.G. (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1). Retrieved from https://doi.org/10.1063/1.4812734Journal article Mirzadeh, A., Lafleur, P.G., Kamal, M.R. & Dubois, C. (2013). Morphology Evolution and Thermomechanical Characteristics of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Rubber Chemistry and Technology, 86(4), 521-537. Retrieved from https://doi.org/10.5254/RCT.13.87996
- 2012
Journal article Lozano, T., Laria, J., Lafleur, P.G., Sanchez-Valdes, S., Rodriguez-Gonzalez, F. & Morales-Cepeda, A.B. (2012). Beta phase in polypropylene induced by shear in a single-screw extruder. Polymer Engineering and Science, 52(8), 1672-1677. Retrieved from https://doi.org/10.1002/pen.23114Journal article Mirzadeh, A., Lafleur, P.G., Kamal, M.R. & Dubois, C. (2012). The Effects of Nanoclay Dispersion Levels and Processing Parameters on the Dynamic Vulcanization of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Polymer Engineering and Science, 52(5), 1099-1110. Retrieved from https://doi.org/10.1002/pen.22178
- 2011
Journal article Stoeffler, K., Lafleur, P.G., Perrin-Sarazin, F., Bureau, M.N. & Denault, J. (2011). Micro-mechanisms of deformation in polyethylene/clay micro- and nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(8), 916-927. Retrieved from https://doi.org/10.1016/j.compositesa.2011.03.020Journal article Naderi, G., Razavi-Nouri, M., Taghizadeh, E., Lafleur, P.G. & Dubois, C. (2011). Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polymer Engineering and Science, 51(2), 278-284. Retrieved from https://doi.org/10.1002/pen.21824
- 2010
Journal article Rajabian, M., Naderi, G., Dubois, C. & Lafleur, P.G. (2010). Measurements and Model Predictions of Transient Elongational Rheology of Polymeric Nanocomposites. Rheologica Acta, 49(1), 105-118. Retrieved from https://doi.org/10.1007/s00397-009-0395-3Journal article Eslami, H., Grmela, M., Dubois, C. & Lafleur, P. (2010). Melt rheology of biodegradable poly[(butylene succinate)-co-adipate]: Experimental and model predictions. Journal of polymer science. Part B, Polymer physics, 48(8), 832-839. Retrieved from https://doi.org/10.1002/polb.21949Journal article Mirzadeh, A., Lafleur, P.G., Kamal, M.R. & Dubois, C. (2010). The effect of compatibilizer on the co-continuity and nanoclay dispersion level of tpe nanocomposites based on PP/EPDM. Polymer Engineering and Science, 50(11), 2131-2142. Retrieved from https://doi.org/10.1002/pen.21744
- 2009
Journal article Fatahi, S., Ajji, A. & Lafleur, P.G. (2009). Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films. Polymer Engineering and Science, 47(9), 1430-1440. Retrieved from https://doi.org/10.1002/pen.20836
- 2008
Journal article Stoeffler, K., Lafleur, P.G. & Denault, J. (2008). Effect of Intercalating Agents on Clay Dispersion and Thermal Properties in Polyethylene/Montmorillonite Nanocomposites. Polymer Engineering and Science, 48(8), 1449-1466. Retrieved from https://doi.org/10.1002/pen.21117Journal article Rajabian, M., Naderi, G., Beheshty, M.H., Lafleur, P.G., Dubois, C. & Carreau, P.J. (2008). Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows. International Polymer Processing, 23(1), 110-118. Retrieved from https://doi.org/10.3139/217.2101Journal article Zhang, Z. & Lafleur, P.G. (2008). Investigation of Ldpe Blown Film Instability Induced by Air Cooling. Polymer Engineering and Science, 48(8), 1504-1510. Retrieved from https://doi.org/10.1002/pen.21112Journal article Stoeffler, K., Lafleur, P.G. & Denault, J. (2008). The Effect of Clay Dispersion on the Properties of Lldpe/Lldpe-G-Mah/Montmorillonite Nanocomposites. Polymer Engineering and Science, 48(12), 2459-2473. Retrieved from https://doi.org/10.1002/pen.21204Journal article Naderi, G., Lafleur, P.G. & Dubois, C. (2008). The Influence of Matrix Viscosity and Composition on the Morphology, Rheology, and Mechanical Properties of Thermoplastic Elastomer Nanocomposites Based on Epdm/Pp. Polymer Composites, 29(12), 1301-1309. Retrieved from https://doi.org/10.1002/pc.20495Journal article Stoeffler, K., Lafleur, P.G. & Denault, J. (2008). Thermal Decomposition of Various Alkyl Onium Organoclays: Effect on Polyethylene Terephthalate Nanocomposites' Properties. Polymer Degradation and Stability, 93(7), 1332-1350. Retrieved from https://doi.org/10.1016/j.polymdegradstab.2008.03.029
- 2007
Journal article Zhang, Z. & Lafleur, P.G. (2007). A Study of Heat Transfer in the Blown Film Process. Journal of Plastic Film & Sheeting, 23(4), 297-317. Retrieved from https://doi.org/10.1177/8756087907087466Journal article Naderi, G., Lafleur, P.G. & Dubois, C. (2007). Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on EPDM/PP (Rheology & Morphology). International Polymer Processing, 22(3), 284-292. Retrieved from https://doi.org/10.3139/217.1017Journal article Fatahi, S., Ajji, A. & Lafleur, P.G. (2007). Investigation on the Structure and Properties of Different Pe Blown Films. International Polymer Processing, 22(4), 334-345. Retrieved from https://doi.org/10.3139/217.0009Journal article Naderi, G., Lafleur, P.G. & Dubois, C. (2007). Microstructure-Properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on PP/EPDM. Polymer Engineering and Science, 47(3), 207-217. Retrieved from https://doi.org/10.1002/pen.20673Journal article Dubois, C., Lafleur, P.G., Roy, C., Brousseau, P. & Stowe, R.A. (2007). Polymer-Grafted Metal Nanoparticles for Fuel Applications. Journal of Propulsion and Power, 23(4), 651-658. Retrieved from https://doi.org/10.2514/1.25384
- 2006
Journal article Zhang, Z., LaFleur, P.G. & Bertrand, F. (2006). Effect of Aerodynamics on Film Blowing Process. International Polymer Processing, 21(5), 527-535. Retrieved from https://doi.org/10.3139/217.0037Journal article Hashemi, S.A., Sahraian, R., Lafleur, P.G. & Stoeffler, K. (2006). Focus Ion Beam Preparation of Transmission Electron Microscope Sample in Polymer Clay Nanocomposite. Iranian Polymer Journal, 15(7), 539-545. Retrieved from http://www.sid.ir/En/Journal/ViewPaper.aspx?ID=48006
- 2005
Journal article Fatahi, S., Ajji, A. & Lafleur, P.G. (2005). Correlation between structural parameters and property of PE blown films. Journal of Plastic Film & Sheeting, 21(4), 281-305. Retrieved from https://doi.org/10.1177/8756087905059979Journal article Gamache, E., Agassant, J.F., Demay, Y. & Lafleur, P.G. (2005). Evaluation of stresses in a two-layer co-extruded LDPE melt blown film. Journal of Plastic Film & Sheeting, 21(2), 127-144. Retrieved from https://doi.org/10.1177/8756087905057006Journal article Fang, Y., Carreau, P.J., Lafleur, P.G. & Ymmel, S. (2005). Properties of MLLDPE/LDPE blends in film blowing. Polymer Engineering and Science, 45(3), 343-353. Retrieved from https://doi.org/10.1002/pen.20279Journal article Fang, Y., Carreau, P.J. & Lafleur, P.G. (2005). Thermal and rheological properties of MLLDPE/LDPE blends. Polymer Engineering and Science, 45(9), 1254-1264. Retrieved from https://doi.org/10.1002/pen.20401
- 2004
Journal article Sepehr, M., Carreau, P.J., Grmela, M., Ausias, G. & Lafleur, P.G. (2004). Comparison of Rheological Properties of Fiber Suspensions With Model Predictions. Journal of Polymer Engineering, 24(6), 579-610. Retrieved from https://doi.org/10.1515/POLYENG.2004.24.6.579Journal article Kim, S., Fang, Y., Lafleur, P.G. & Carreau, P.J. (2004). Dynamics and criteria for bubble instabilities in a single layer film blowing extrusion. Polymer Engineering and Science, 44(2), 283-302. Retrieved from https://doi.org/10.1002/pen.20027Journal article Lozano, T., Lafleur, P.G., Grmela, M. & Thibodeau, C. (2004). Effect of Filler Dispersion on Polypropylene Morphology. Polymer Engineering and Science, 44(5), 880-890. Retrieved from https://doi.org/10.1002/pen.20079
- 2003
Journal article Kay, D., Carreau, P.J., Lafleur, P.G., Robert, L. & Vergnes, B. (2003). A Study of the Stick-Slip Phenomenon in Single-Screw Extrusion of Linear Polyethylene. Polymer Engineering and Science, 43(1), 78-90. Retrieved from https://doi.org/10.1002/pen.10007Journal article Lozano, T., Lafleur, P.G., Grmela, M. & Vergnes, B. (2003). Modeling Filler Dispersion Along a Twin-Screw Extruder. International Polymer Processing, 18(1), 12-19. Retrieved from https://doi.org/10.3139/217.1718Journal article Fang, Y.L., Carreau, P.J. & Lafleur, P.G. (2003). Rheological Effects of Polyethylenes in Film Blowing. Polymer Engineering and Science, 43(7), 1391-1406. Retrieved from https://doi.org/10.1002/pen.10118
- 2002
Journal article Lozano, T., Lafleur, P.G. & Grmela, M. (2002). A Chemical Model for the Dispersion of Fillers in a Polymeric Matrix. Canadian Journal of Chemical Engineering, 80(6), 1135-1142. Retrieved from https://doi.org/10.1002/cjce.5450800615Journal article Berzin, F., Vergnes, B., Lafleur, P.G. & Grmela, M. (2002). A theoretical approach to solid filler dispersion in a twin-screw extruder. Polymer Engineering and Science, 42(3), 473-481. Retrieved from https://doi.org/10.1002/pen.10964Journal article Laffargue, J., Parent, L., Lafleur, P.G., Carreau, P.J., Demay, Y. & Agassant, J.F. (2002). Investigation of Bubble Instabilities in Film Blowing Process. International Polymer Processing, 17(4), 347-353. Retrieved from https://doi.org/10.3139/217.1704
- 2000
Journal article Tremblay, S.R., Lafleur, P.G. & Ait-Kadi, A. (2000). Effects of injection parameters on fiber attrition and mechanical properties of polystyrene molded parts. Journal of injection molding technology, 4(1), 1-7.
- 1999
Journal article Lafleur, P.G., Bories, M. & Huneault, M.A. (1999). Effect of twin-screw extruder design and process conditions on ultrafine CaCO3 dispersion into PP. International Polymer Processing, 14(3), 234-240. Retrieved from https://doi.org/10.3139/217.1551Journal article Lafleur, P.G., Gamache, E., Peiti, C. & Vergnes, B. (1999). Measurement of the coefficient of dynamic friction at extrusion processing conditions. Polymer engineering and science, 39(9), 1604-1613. Retrieved from https://doi.org/10.1002/pen.11554Journal article Schmidt, F.M., Lafleur, P., Berthet, F. & Devos, P. (1999). Numerical Simulation of Resin Transfer Molding Using Linear Boundary Element Method. Polymer composites, 20(6), 725-732. Retrieved from https://doi.org/10.1002/pc.10396Journal article Huneault, M.A., Godfroy, P.G. & Lafleur, P.G. (1999). Performance of Talc/Ethylene-Octene Copolymer Polypropylene Blends. Polymer engineering and science, 39(6), 1130-1138. Retrieved from https://doi.org/10.1002/pen.11500
- 1998
Journal article Grmela, M. & Lafleur, P.G. (1998). Kinetic Theory and Hydrodynamics of Rigid Body Fluids. Journal of chemical physics, 109(16), 6956-6972. Retrieved from https://doi.org/10.1063/1.477332Journal article Grmela, M., Ait-Kadi, A. & Lafleur, P.G. (1998). Suspensions of Fibers in Viscoelastic Fluids: Rheology. Journal of chemical physics, 109(16), 6973-6981. Retrieved from https://doi.org/10.1063/1.477333
- 1997
Journal article Yousefi, A., Lafleur, P.G. & Gauvin, R. (1997). Kinetic studies of thermoset cure reactions: a review. Polymer composites, 18(2), 157-168. Retrieved from https://doi.org/10.1002/pc.10270Journal article Yousefi, A., Lafleur, P.G. & Gauvin, R. (1997). Numerical analysis of promoted polyester and vinylester reinforced composites in rtm molds. Polymer engineering and science, 37(5), 757-771. Retrieved from https://doi.org/10.1002/pen.11719Journal article Ghanehfard, A., Carreau, P.J. & Lafleur, P.G. (1997). On-line birefringence measurement in film blowing of a linear low density polyethylene. International Polymer Processing, 12(2), 136-146. Retrieved from https://doi.org/10.3139/217.970136Journal article Ghaneh-Fard, A., Carreau, P.J. & Lafleur, P.G. (1997). Study of kinematics and dynamics of film blowing of different polyethylenes. Polymer engineering and science, 37(7), 1148-1163. Retrieved from https://doi.org/10.1002/pen.11759Journal article Yousefi, A., Lafleur, P.G. & Gauvin, R. (1997). The effects of cobalt promoter and glass fibers on the curing behavior of unsaturated polyester resin. Journal of vinyl and additive technology, 3(2), 157-169. Retrieved from https://doi.org/10.1002/vnl.10183
- 1996
Journal article Huneault, M.A., Lafleur, P.G. & Carreau, P.J. (1996). Evaluation of the fan technique for profile die design. International Polymer Processing, 11(1), 50-57. Retrieved from https://doi.org/10.3139/217.960050Journal article Ghaneh-Fard, A., Carreau, P.J. & Lafleur, P.G. (1996). Study of instabilities in film blowing. AIChE journal, 42(5), 1388-1396. Retrieved from https://doi.org/10.1002/aic.690420519
- 1994
Journal article Arpin, B., Lafleur, P.G. & Sanschagrin, B. (1994). A personal computer software program for coathanger die simulation. Polymer engineering and science, 34(8), 657-664. Retrieved from https://doi.org/10.1002/pen.760340807Journal article Lafleur, P.G., Arpin, B. & Lenir, V. (1994). Computer aided design of wire coating dies. Advances in Polymer Technology, 13(4), 297-304. Retrieved from https://doi.org/10.1002/adv.1994.060130405Journal article Wang, X., Clement, B., Carreau, P.J. & Lafleur, P.G. (1994). Extrudate roughness of HDPE and LLDPE : Determination of key parameters using screening design. Polymer Engineering and Science, 34(13), 1047-1055. Retrieved from https://doi.org/10.1002/pen.760341303
- 1991
Journal article Malik, T.M., Carreau, P.J., Lafleur, P.G. & Fisa, B. (1991). Effect of filler treatment on the rheological and mechanical properties of polyethylene composites. Chemical Engineering Communications, 105(1), 11-25. Retrieved from https://doi.org/10.1080/00986449108911514
- 2022
- Conference papers (26)
- 2010
Conference paper Stoeffler, K., Lafleur, P.G., Perrin-Sarazin, F. & Denault, J. (2010). Deformation and fracture mechanisms in polyethylene / clay nanocomposites. Paper presented at the 68th Annual Technical Conference of the Society of Plastics Engineers 2010. ANTEC 2010, Orlando, Florida USA (pp. 468-472). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt007YBB5G/antec-2010-plastics-annual/deformation-fracture
- 2008
Conference paper Lafleur, P., Boudreault, Y. & Prégent, R. (2008). Meeting the challenge of reviewing eleven engineering programs. Paper presented at the ASEE Annual Conference and Exposition, Pittsburgh, PA, United states. Retrieved from https://doi.org/10.18260/1-2--3448
- 2007
Conference paper Stoeffler, K., Lafleur, P.G. & Denault, J. (2007). Polyethylene nanocomposites based on high thermal stability organoclays. Paper presented at the ANTEC 2007, Cincinnati, OH, United States (pp. 123-127). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt004OIMI5/antec-2007-plastics-annual/antec-2007-properties
- 2006
Conference paper Fatahi, S., Ajji, A. & Lafleur, P.G. (2006). Correlations of tensile modulus for polyethylene blown films with microstructural parameters. Paper presented at the ANTEC 2006, Charlotte, NC, United States (pp. 675-679). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt003YK0W6/antec-2006-plastics-annual/correlations-tensileConference paper Zhang, Z. & Lafleur, P.G. (2006). The effect of cooling air aerodynamics on bubble instability in blown film. Paper presented at the ANTEC 2006, Charlotte, NC, United States (pp. 820-824). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt003YK1N1/antec-2006-plastics-annual/effect-cooling-air-aerodynamicsConference paper Stoeffler, K., Lafleur, P.G. & Denault, J. (2006). Thermal properties of polyethylene nanocomposites based on different organoclays. Paper presented at the ANTEC 2006, Charlotte, NC, United States (pp. 263-267). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt003YJYL2/antec-2006-plastics-annual/thermal-properties-pe
- 2005
Conference paper Bailon, J.-P., Clement, B. & Lafleur, P.G. (2005). Same course, two methods of learning: Assessment of the student's success. Paper presented at the ASEE Annual Conference and Exposition, Pittsburgh, PA, United states (pp. 12447-12462). Retrieved from https://doi.org/10.18260/1-2--14619Conference paper Fatahi, S., Ajji, A. & Lafleur, P.G. (2005). Structure-property correlations for pe blown films. Paper presented at the ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. Retrieved from https://app.knovel.com/hotlink/pdf/id:kt003RZXY4/antec-2005-plastics-annual/structure-property-correlationsConference paper Zhijie, Z. & Lafleur, P.G. (2005). Study on aerodynamics of cooling in film blowing. Paper presented at the ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA (pp. 173-177). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt003S0HO1/antec-2005-plastics-annual-2/study-aerodynamics-cooling
- 2004
Conference paper Roy, C., Dubois, C., Lafleur, P. & Brousseau, P. (2004). The dispersion and polymer coating of ultrafine aluminium powders by the Ziegler-Natta reaction. Paper presented at the Synthesis, Characterization and Properties of Energetic/ Reactive Nanomaterials Symposium, Boston, MA, USA (pp. 79-84). Retrieved from https://doi.org/10.1557/PROC-800-AA2.5
- 2001
Conference paper Beaumier, D., Lafleur, P.G. & Thibodeau, C.A. (2001). Streamline die design for complex geometries. Paper presented at the ANTEC : Annual Technical Conference - Society of Plastics Engineers (pp. 54-58). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt001DEQ91/antec-2001-plastics-lone/streamline-die-design
- 2000
Conference paper Thibodeau, C.A. & Lafleur, P.G. (2000). Computer design and screw optimization. Paper presented at the ANTEC : Annual Technical Conference. Society of Plastics Engineers (pp. 276-280). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0017P211/antec-2000-plastics-magical/computer-design-screwConference paper Lafleur, P.G., Berzin, F., Grmela, M., Vergnes, B. & Tremblay, S.R. (2000). Simulation of CaCo3 dispersion in a pp matrix during twin screw extrusion. Paper presented at the Antec 2000, Orlando, FL (pp. 5). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0017P0R1/antec-2000-plastics-magical/simulation-caco3-dispersion
- 1999
Conference paper Bories, M., Huneault, M.A. & Lafleur, P.G. (1999). Effect of compounding conditions on the dispersion of highly filled calcium carbonate/pp compounds in twin-screw extruders. Paper presented at the Antec '99.Volume 1, New York City, USA (pp. 350-354). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0015PDH1/antec-1999-plastics-bridging/effect-compounding-conditionsConference paper Godfroy, P.G., Huneault, M.A. & Lafleur, P.G. (1999). Effect of pp-gma on properties of talc filled polypropylene. Paper presented at the Antec '99. Volume III, New York City, USA (pp. 3147-3151). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0017G1F5/antec-1999-plastics-bridging/effect-pp-gma-propertiesConference paper Tremblay, S.R., Lafleur, P.G. & Ait-Kadi, A. (1999). Effects of injection parameters on fiber attrition and mechanical properties of polystyrene molded parts. Paper presented at the Antec '99.Volume 1, New York City, USA (pp. 432-436). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0015PE13/antec-1999-plastics-bridging/effects-injection-parameters
- 1998
Conference paper Huneault, M.A., Godfroy, P.G. & Lafleur, P.G. (1998). Effect of compounding conditions and composition on the performance of talc/ethylene-octene copolymer/polypropylene blends (tpo). Paper presented at the Antec '98. Volume I, Atlanta, Ga (pp. 7-11). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0017L4X7/antec-1998-plastics-plastics/effect-compounding-conditionsConference paper Lafleur, P.G., Carreau, P.J. & Ghaneh-Fard, A. (1998). In-line birefringence measurements on film blowing of polyolefins. Paper presented at the International Symposium on Orientation of Polymers, Boucherville, Qc. (pp. 270-271).Conference paper Carreau, P.J., Ghaneh-Ford, A. & Lafleur, P.G. (1998). Rheological effects in film blowing. Paper presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1998) (pp. 3598-3603). Retrieved from https://app.knovel.com/hotlink/pdf/id:kt0017UXG5/antec-1998-plastics-plastics/rheological-effects-inConference paper Rollin, A.L., Montgrain, F., Lafleur, P. & Maranda, L. (1998). The influence of the welding parameters for hdpe geomembranes. Paper presented at the 6th International Conference on Geosynthetics (pp. 331+).
- 1997
Conference paper Huneault, M.A., Godfroy, P. & Lafleur, P.G. (1997). Effect of compounding conditions and composition on the performance of talc/ethylene-octene copolymer/polypropylene blends (tpo). Paper presented at the Polyblends '97, Boucherville, Qc (pp. 235-251).
- 1996
Conference paper Ghaneh-Fard, A., Carreau, P.J. & Lafleur, P.G. (1996). Application of birefringence to film blowing. Paper presented at the 53rd Annual Technical Conference, Boston, MA. (Published in Journal of Plastic Film & Sheeting, 12(1), 68-86).Conference paper Ghaneh-Fard, A., Carreau, P.J. & Lafleur, P.G. (1996). Study of kinematics and dynamics of film blowing of a linear low density polyethylene. Paper presented at the 54th Annual Technical Conference, Indianapolis, IN, USA (pp. 111-115).
- 1995
Conference paper Yousefi, A., Lafleur, P.G. & Gauvin, R. (1995). Effects of cobalt promoter and glass fiber on the curing behavior of unsaturated polyester resin. Paper presented at the 53rd Annual Technical Conference, Boston, MA, USA (pp. 3030-3034).
- 1994
Conference paper Wang, X., Carreau, P.J. & Lafleur, P.G. (1994). Entrance pressure loss and extrudate roughness during hdpe extrusion. Paper presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1994), San Francisco, Ca. (pp. 1175-1179).Conference paper Doyon, J.-F., Lafleur, P.G., Carreau, P.J. & Vergnes, B. (1994). Recycling of polyolefins: processability and degradation. Paper presented at the 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA (pp. 2876-2880).
- 2010
- Books (2)
- 2014
Book Lafleur, P.G. & Vergnes, B. (2014). Extrusion des polymères.Book Lafleur, P.G. & Vergnes, B. (2014). Polymer extrusion. Wiley. Retrieved from https://doi.org/10.1002/9781118827123
- 2014
