Répertoire des expertises

Batailly, Alain

Répertoire des expertises

Batailly, Alain

Répertoire des expertises

Publications par type

Article de revue (40) Communication de conférence (34) Livre Chapitre de livre Brevet Rapport Thèse (1) Ensemble de données Ressource pédagogique Image Enregistrement audio Enregistrement vidéo Autre

Alain Batailly (75)

Articles de revue (40)
- 2023
  - Kojtych, S., Nyssen, F., Audet, C., & Batailly, A. (2023). Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-tip/casing Contacts. Journal of Engineering for Gas Turbines and Power, 145(5), 22-1332 (11 pages).
  - Dréau, J., Magnain, B., & Batailly, A. (2023). Multi-element polynomial chaos expansion based on automatic discontinuity detection for nonlinear systems. Journal of Sound and Vibration, 567, 25 pages.
  - Delhez, E., Nyssen, F., Golinval, J. C., & Batailly, A. (2023). Numerical study of bladed structures with geometric and contact nonlinearities. Journal of Sound and Vibration, 544, 117382 (27 pages).
  - Kojtych, S., & Batailly, A. (2023). Open Nasa Blade Models for Nonlinear Dynamics Simulations. Journal of Engineering for Gas Turbines and Power, GTP-23-139 (30 pages).
  - Kojtych, S., Audet, C., & Batailly, A. (2023). Two-Way Blade Modeling Method for Structural Redesign of Compressor Blades. AIAA Journal, 20 pages.
- 2022
  - Vadcard, T., Colaïtis, Y., Batailly, A., & Thouverez, F. (2022). Assessment of two harmonic balance method-based numerical strategies for blade-tip/casing interactions: Application to Nasa Rotor67. Journal of Engineering for Gas Turbines and Power, 144(12), 12 pages.
  - Audet, C., Batailly, A., & Kojtych, S. (2022). Escaping Unknown Discontinuous Regions in Blackbox Optimization. SIAM Journal on Optimization, 32(3), 1843-1870.
  - Nyssen, F., Colaitis, Y., & Batailly, A. (2022). Numerical investigation of a mistuned industrial bladed disk dynamics with structural contacts using time and frequency methods. Journal of Sound and Vibration, 535, 117077 (18 pages).
  - Vadcard, T., Batailly, A., & Thouverez, F. (2022). On harmonic balance method-based Lagrangian contact formulations for vibro-impact problems. Journal of Sound and Vibration, 531, 116950 (26 pages).
  - Colaïtis, Y., & Batailly, A. (2022). Stability analysis of an industrial blade accounting for a blade-tip/casing nonlinear interface. Journal of Engineering for Gas Turbines and Power, 145(4), 32 pages.
  - Colaitis, Y., & Batailly, A. (2022). Stability analysis of periodic solutions computed for blade-tip/casing contact problems. Journal of Sound and Vibration, 538, 117219 (25 pages).
- 2021
  - Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of Geometric Nonlinearities Influence on NASA Rotor 37 Response to Blade Tip/Casing Rubbing Events. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(11), 8 pages.
  - Colaïtis, Y., & Batailly, A. (2021). Development of a Harmonic Balance Method-Based Numerical Strategy for Blade-Tip/Casing Interactions: Application to NASA Rotor 37. Journal of Engineering for Gas Turbines and Power, 143(11), 31 pages.
  - Nyssen, F., & Batailly, A. (2021). Investigation on the Robustness of Rotor/Stator Contact Interactions With Respect to Small Mistuning. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(12), 121015 (10 pages).
  - Joachim, J., Nyssen, F., & Batailly, A. (2021). Numerical Investigation of a Mistuned Academic Bladed Disk Dynamics With Blade/Casing Contact. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 143(4), 041028 (11 pages).
  - Dreau, J., Magnain, B., Nyssen, F., & Batailly, A. (2021). Polynomial chaos expansion for permutation and cyclic permutation invariant systems: Application to mistuned bladed disks. Journal of Sound and Vibration, 503, 24 pages.
  - Delhez, E., Nyssen, F., Golinval, J. C., & Batailly, A. (2021). Reduced order modeling of blades with geometric nonlinearities and contact interactions. Journal of Sound and Vibration, 500, 27 pages.
  - Colaitis, Y., & Batailly, A. (2021). The harmonic balance method with arc-length continuation in blade-tip/casing contact problems. Journal of Sound and Vibration, 502, 27 pages.
- 2020
  - Nyssen, F., Tableau, N., Lavazec, D., & Batailly, A. (2020). Experimental and numerical characterization of a ceramic matrix composite shroud segment under impact loading. Journal of Sound and Vibration, 467, 31 pages.
  - Nyssen, F., & Batailly, A. (2020). Sensitivity Analysis of Rotor/Stator Interactions Accounting for Wear and Thermal Effects within Low- and High-Pressure Compressor Stages. Coatings, 10(1), 23 pages.
- 2019
  - Lainé, J., Piollet, E., Nyssen, F., & Batailly, A. (2019). Blackbox Optimization for Aircraft Engine Blades With Contact Interfaces. Journal of Engineering for Gas Turbines and Power, 141(6), GTP-18-124 (16 pages).
  - Piollet, E., Nyssen, F., & Batailly, A. (2019). Blade/casing rubbing interactions in aircraft engines: Numerical benchmark and design guidelines based on NASA rotor 37. Journal of Sound and Vibration, 460, 30 pages.
  - Agrapart, Q., Nyssen, F., Lavazec, D., Dufrenoy, P., & Batailly, A. (2019). Multi-physics numerical simulation of an experimentally predicted rubbing event in aircraft engines. Journal of Sound and Vibration, 460, 25 pages.
  - Nyssen, F., & Batailly, A. (2019). Thermo-Mechanical Modeling of Abradable Coating Wear in Aircraft Engines. Journal of Engineering for Gas Turbines and Power, 141(2).
- 2018
  - Berthoul, B., Batailly, A., Stainier, L., Legrand, M., & Cartraud, P. (2018). Phenomenological modeling of abradable wear in turbomachines. Mechanical Systems and Signal Processing, 98, 770-785.
- 2017
  - Magnain, B., Batailly, A., & Florentin, E. (2017). Adaptive reduced basis strategy dedicated to the solution of nonstationary stochastic thermal problems. Computers & Structures, 182, 491-503.
  - Batailly, A., Legrand, M., & Pierre, C. (2017). Full three-dimensional rotor/stator interaction simulations in aircraft engines with time-dependent angular speed. Journal of Engineering for Gas Turbines and Power, 139(3), 7 pages.
- 2016
  - Batailly, A., Agrapart, Q., Millecamps, A., & Brunel, J.-F. (2016). Experimental and numerical simulation of a rotor/stator interaction event localized on a single blade within an industrial high-pressure compressor. Journal of Sound and Vibration, 375, 308-331.
  - Salvat, N., Batailly, A., & Legrand, M. (2016). Two-dimensional modeling of unilateral contact-induced shaft precessional motions in bladed-disk/casing systems. International Journal of Non-Linear Mechanics, 78, 90-104.
- 2015
  - Batailly, A., Legrand, M., Millecamps, A., & Garcin, F. (2015). Conjectural bifurcation analysis of the contact-induced vibratory response of an aircraft engine blade. Journal of Sound and Vibration, 348, 239-262.
  - Batailly, A., Legrand, M., Millecamps, A., Cochon, S., & Garcin, F. (2015). Redesign of a high-pressure compressor blade accounting for nonlinear structural interactions. Journal of Engineering for Gas Turbines and Power, 137(2), 8 pages.
  - Batailly, A., & Legrand, M. (2015). Unilateral contact induced blade/casing vibratory interactions in impellers: Analysis for flexible casings with friction and abradable coating. Journal of Sound and Vibration, 348, 344-364.
  - Batailly, A., Meingast, M., & Legrand, M. (2015). Unilateral contact induced blade/casing vibratory interactions in impellers: Analysis for rigid casings. Journal of Sound and Vibration, 337, 244-262.
- 2013
  - Batailly, A., Magnain, B., & Chevaugeon, N. (2013). A comparative study between two smoothing strategies for the simulation of contact with large sliding. [Etude comparative de deux méthodes de lissage pour les simulations de contact avec grands glissements]. Computational Mechanics, 51(5), 581-601.
  - Salvat, N., Batailly, A., & Legrand, M. (2013). Modeling of abradable coating removal in aircraft engines through delay differential equations. Journal of Engineering for Gas Turbines and Power, 135(10), 7 pages.
  - Batailly, A., Cuny, M., Legrand, M., & Philippon, S. (2013). Numerical-experimental confrontation in the simulation of tool/abradable material interaction. [Confrontation entre résultats expérimentaux et numériques pour la simulation de l'interaction outil/abradable]. Journal of Engineering for Gas Turbines and Power, 135(6), 10 pages.
- 2012
  - Legrand, M., Batailly, A., Magnain, B., Cartraud, P., & Pierre, C. (2012). Full three-dimensional investigation of structural contact interactions in turbomachines. Journal of Sound and Vibration, 331(11), 2578-2601.
  - Batailly, A., Legrand, M., Millecamps, A., & Garcin, F. (2012). Numerical-experimental comparison in the simulation of rotor/stator interaction through blade-tip/abradable coating contact. Journal of Engineering for Gas Turbines and Power, 134(8), 11 pages.
  - Legrand, M., Batailly, A., & Pierre, C. (2012). Numerical investigation of abradable coating removal in aircraft engines through plastic constitutive law. Journal of Computational and Nonlinear Dynamics, 7(1).
- 2010
  - Batailly, A., Legrand, M., Cartraud, P., & Pierre, C. (2010). Assessment of reduced models for the detection of modal interaction through rotor stator contacts. [Évaluation de modèles réduits pour la détection de cas d'interaction modale initiés par des contacts rotor stator]. Journal of Sound and Vibration, 329(26), 5546-5562.
Communications de conférence (34)
- 2022
  - Vadcard, T., Colaitis, Y., Batailly, A., & Thouverez, F. (juin 2022). Assessment of Two Harmonic Balance Method-Based Numerical Strategies for Blade-Tip/Casing Interactions: Application to NASA Rotor67 [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages).
  - Kojtych, S., Nyssen, F., Audet, C., & Batailly, A. (juin 2022). Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-Tip/Casing Contacts [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages).
  - Dréau, J., Magnain, B., & Batailly, A. (août 2022). Multi-element polynomial chaos with automatic discontinuity detection for nonlinear systems [Communication écrite]. 15th World Congress on Computational Mechanics (WCCM 2022) & 8th Asia Pacific Congress on Computational Mechanics (APCOM 2022), Yokohama, Japan.
  - Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (août 2022). Reduced order modeling of cyclically symmetric bladed disks with geometric and contact nonlinearities [Communication écrite]. 15th World Congress on Computational Mechanics (WCCM 2022) & 8th Asia Pacific Congress on Computational Mechanics (APCOM 2022), Yokohama, Japan.
  - Colaitis, Y., & Batailly, A. (juin 2022). Stability Analysis of an Industrial Blade Accounting for a Blade-Tip/Casing Nonlinear Interface [Communication écrite]. ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), Rotterdam, Netherlands (12 pages).
- 2020
  - Delhez, E., Golinval, J.-C., Nyssen, F., & Batailly, A. (septembre 2020). Comparative study of blades reduced order models with geometrical nonlinearities and contact interfaces [Communication écrite]. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition (GT 2020) (12 pages).
- 2019
  - Joachim, J., Nyssen, F., & Batailly, A. (novembre 2019). Numerical investigation of an academic mistuned bladed disk dynamics accounting for blade/casing contacts [Communication écrite]. ASME 2019 International Mechanical Engineering Congress and Exposition, (IMECE 2019), Salt Lake City, UT, United states (10 pages).
  - Nyssen, F., Vadcard, T., Piollet, E., & Batailly, A. (juin 2019). Strongly coupled thermo-mechanical casing/abradable model for rotor/stator interactions [Communication écrite]. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition (GT 2019), Phoenix, AZ, United states.
- 2018
  - Nyssen, F., & Batailly, A. (juin 2018). Thermo-mechanical modeling of abradable coating wear in aircraft engines [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway.
  - Laine, J., Piollet, E., & Batailly, A. (juin 2018). Towards the structural optimization of bladed components featuring contact interfaces [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (13 pages).
- 2017
  - Nyssen, F., & Batailly, A. (décembre 2017). Investigations on thermo-mechanical modeling of abradable coating in the context of rotor/stator interactions [Communication écrite]. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC 2017), Maui, HI, United states.
  - Khalifeh, E., Piollet, E., Millecamps, A., & Batailly, A. (juin 2017). Non-Linear Modeling Of Centrifugal Stiffening Effects For Accurate Bladed Component Reduced-Order Models [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (ASME Turbo Expo 2017), Charlotte, NC (10 pages).
  - Paltrinieri, J., Nyssen, F., Parent, M. O., & Batailly, A. (juin 2017). Towards Full 3d Numerical Simulation Of Whirl Motions Stemming From Unilateral Contact Constraints In Aircraft Engines [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (ASME Turbo Expo 2017), Charlotte, NC (10 pages).
- 2016
  - Batailly, A., Agrapart, Q., & Millecamps, A. (juin 2016). Experimental and numerical simulation of a contact induced rotor/stator interaction inside an aircraft engine high-pressure compressor [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages).
  - Batailly, A., Legrand, M., & Pierre, C. (juin 2016). Full 3D rotor/stator interaction simulations in aircraft engines with time-dependent angular speed [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (10 pages).
  - Batailly, A., & Millecamps, A. (juin 2016). Minimising clearance consumption: a key factor for the design of blades robust to rotor/stator interactions ? [Communication écrite]. ASME Turbo Expo: Turbine Technical Conference and Exposition (GT2016), Seoul, South Korea (8 pages).
- 2015
  - Berthoul, B., Batailly, A., Legrand, M., Stainier, L., & Cartraud, P. (juin 2015). Abradable coating removal in turbomachines: A macroscopic approach accounting for several wear mechanisms [Communication écrite]. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montréal, Québec (8 pages).
  - Millecamps, A., Batailly, A., Legrand, M., & Garcin, F. (juin 2015). Snecma's viewpoint on the numerical and experimental simulation of blade-tip/casing unilateral contacts [Communication écrite]. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montréal, Québec (11 pages).
- 2014
  - Batailly, A., & Legrand, M. (juin 2014). Conjectural bifurcation analysis of an aircraft engine blade undergoing 3D unilateral contact constraints [Communication écrite]. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany (10 pages).
  - Batailly, A., Legrand, M., Millecamps, A., & Garcin, F. (juin 2014). High-pressure compressor blade dynamics under aerodynamic and unilateral contact forcings [Communication écrite]. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany (8 pages).
  - Salvat, N., Batailly, A., & Legrand, M. (juin 2014). Two-dimensional modeling of shaft precessional motions induced by blade/casing unilateral contact in aircraft engines [Communication écrite]. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany (10 pages).
- 2013
  - Butlin, T., & Batailly, A. (juin 2013). Anti-optimisation applied to the analysis of rotor/stator interaction [Communication écrite]. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas (10 pages).
  - Meingast, M. B., Batailly, A., Legrand, M., & Ousty, J.-P. (août 2013). A qualitative numerical analysis of rotor-casing interactions in centrifugal compressors of helicopter engines [Analyse numérique qualitative d'interactions rotor/stator dans un compresseur haute pression d'un moteur d'hélicoptère A qualitative numerical analysis of rotor-casing interactions in centrifugal compressors of helicopter engines]. [Communication écrite]. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA (10 pages).
  - Meingast, M. B., Batailly, A., Legrand, M., & Ousty, J.-P. (juin 2013). Investigation of rotor-casing interactions in the centrifugal compressor of a helicopter engine [Communication écrite]. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas (10 pages).
  - Salvat, N., Batailly, A., & Legrand, M. Modélisation de l'enlèvement de matériau abradable à l'aide d'équations différentielles à retard [Communication écrite]. 11e Colloque National en Calcul des Structures (9 pages).
  - Batailly, A., Meingast, M. B., Legrand, M., & Ousty, J.-P. (août 2013). Rotor/stator interaction scenarios for the centrifugal compressor of a helicopter engine [Scénarios d'interaction rotor/stator pour un compresseur haute pression d'un moteur d'hélicoptère Rotor-stator interaction scenarios for the centrifugal compressor of a helicopter engine]. [Communication écrite]. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA (10 pages).
- 2012
  - Batailly, A., Cuny, M., & Legrand, M. (juin 2012). Numerical simulation of tool/abradable material interaction experiments [Communication écrite]. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, Denmark.
  - Batailly, A., Legrand, M., Millecamps, A., & Garcin, F. (juin 2012). Numerical study of a rotor/stator interaction case experimentally simulated with an industrial compressor [Communication écrite]. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, Denmark.
- 2011
  - Batailly, A., Legrand, M., & Pierre, C. (juin 2011). Influence of abradable coating wear mechanical properties on rotor stator interaction [Influence des propriétés mécaniques du revêtement abradable sur l'interaction rotor/stator]. [Communication écrite]. ASME Turbo Expo 2011: Turbine Technical Conference and Exposition, Vancouver, British Columbia, Canada.
- 2010
  - Magnain, B., Batailly, A., Chevaugeon, N., & Cartraud, P. (mai 2010). Comparative study of the use of C1-continuous finite elements and splines for contact problems with large slidings [Communication écrite]. IV European Conference on Computational Mechanics (ECCM 2010), Paris, France.
  - Batailly, A., Magnain, B., Legrand, M., & Pierre, C. (septembre 2010). Validation of a 3D contact algorithm for the study of bladetip/casing contacts in turbomachines [Communication écrite]. 8th IFToMM International Conference on Rotordynamics, Seoul, Korea.
- 2009
  - Batailly, A., Legrand, M., Cartraud, P., & Pierre, C. (août 2009). Evaluation d'une méthode de réduction modale pour la détection de cas d'interaction modale lors de contacts rotor stator [Communication écrite]. 19eme Congrès Français de Mécanique (CFM2009), Marseille, France.
  - Batailly, A., Legrand, M., Cartraud, P., Pierre, C., & Lombard, J.-P. Evaluation of component mode synthesis methods for the detection of modal interaction through rotor stator contacts [Communication écrite]. ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, California.
- 2007
  - Batailly, A., Legrand, M., Cartraud, P., Pierre, C., & Lombard, J.-P. (septembre 2007). Study of component mode synthesis methods in a rotor-stator interaction case [Communication écrite]. ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC CIE 2007), Las Vegas, Nevada, USA.
Thèses (1)
- 2008
  - Batailly, A. (2008). Simulation de l'interaction rotor/stator pour des turbo-machines aéronautiques en configuration non-accidentelle [Thèse de doctorat, École Centrale de Nantes (ECN)].

Répertoire des expertises

Batailly, Alain

Répertoire des expertises

Batailly, Alain

Vous êtes ici

Publications par type

Alain Batailly (75)