Polytechnique > Research > Directory > A professor or researcher

Directory of Expertises

Photo of Sylvain Turenne

Sylvain Turenne

Professor
Department of Mechanical Engineering

Publications

The bibliographic data is imported from Polytechnique Montréal's Directory of Publications. The bibliography below includes a majority of publications written by a professor/researcher affiliated with Polytechnique, since 1994 (if applicable). Publications before the professor's/researcher's affiliation with Polytechnique or before 1994 may also be included in this list. You may also consult the Directory of Scientific & Technical Publications for more information about the document type coverage.

1 D. Vasilevskiy, J.M. Simard, T. Caillat, R.A. Masut, S. Turenne (2016). Consistency of ZT-Scanner for Thermoelectric Measurements from 300 K to 700 K: A Comparative Analysis Using Si80Ge20 Polycrystalline AlloysJournal of Electronic Materials, 45(3), p. 1540-1547. DOI : 10.1007/s11664-015-4101-1 
2 F. Fareh, V. Demers, S. Turenne, O. Scalzo (2016). Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection moldingInternational Conference on Advanced Materials Engineering and Technology (ICAMET 2015), v. 857, p. 286-290. DOI : 10.4028/www.scientific.net/MSF.857.286 
3 M.K. Keshavarz, D. Vasilevskiy, R.A. Masut, S. Turenne (2016). Mechanical properties of bismuth telluride based alloys with embedded MoS2nano-particlesMaterials and Design, 103, p. 114-121. DOI : 10.1016/j.matdes.2016.04.042 
4 D. Vasilevskiy, J.M. Simard, R.A. Masut, S. Turenne (2015). System for Simultaneous Harman-Based Measurement of All Thermoelectric Properties, from 240 to 720 K, by Use of a Novel Calibration ProcedureJournal of Electronic Materials, 44(6), p. 1733-1742. DOI : 10.1007/s11664-014-3531-5 
5 V. Demers, S. Turenne, O. Scalzo (2015). Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniquesAdvanced Powder Technology, 26(3), p. 997-1004. DOI : 10.1016/j.apt.2015.04.005 
6 V. Demers, S. Turenne, O. Scalzo (2015). Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloyJournal of Materials Science, 50(7), p. 2893-2902. DOI : 10.1007/s10853-015-8853-z 
7 D. Vasilevskiy, M.K. Keshavarz, J. Dufourcq, H. Ihou-Mouko, C. Navonne, R.A. Masut, S. Turenne (2015). Bulk Mg2Si based n-type thermoelectric material produced by gas atomization and hot extrusionMaterials Today-Proceedings, 2(2), p. 523-531. DOI : 10.1016/j.matpr.2015.05.072 
8 A. Behrang, M. Grmela, C. Dubois, S. Turenne, P.G. Lafleur (2015). Temperature dependence of thermal conductivity in hybrid nanodispersionsRSC Advances, 5(4), p. 2768-2776. DOI : 10.1039/c4ra12368a 
9 L. Lebel, S. Turenne, R. Boukhili (2015). Testing ceramic matrix composites for gas turbine combustion chamber panels. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference.
10 L. Lebel, S. Turenne, R. Boukhili (2015). Thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference.
11 J.-P. Carmona, L. Birglen, J. Chaussée, F. Dervault, M. Deshaies, E. Boileau, S. Turenne (2015). Topology optimization of a flap track support for additive manufacturing. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference.
12 D. Vasilevskiy, M.K. Keshavarz, J. Dufourcq, H. Ihou-Mouko, R.A. Masut, S. Turenne (2014). Bulk Mg2Si Based n-Type Thermoelectric Material produced by Gas Atomization and Hot Extrusion. 12th European Conference on Thermoelectrics (ECT 2014).
13 L. Prieto-Vargas, S. Turenne, D. Vasilevskiy, R.A. Masut (2014). Design optimization by numerical simulation of segmented-legs Bi 2Te3 based thermoelectric generator module. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, v. 4, p. 2603-2610.
14 M.K. Keshavarz, D. Vasilevskiy, R.A. Masut, S. Turenne (2014). Effect of suppression of grain growth of hot extruded (Bi 0.2Sb0.8)2Te3 thermoelectric alloys by MoS2 nanoparticlesJournal of Electronic Materials, 43(6), p. 2239-2246. DOI : 10.1007/s11664-014-3019-3 
15 M.K. Keshavarz, D. Vasilevskiy, R.A. Masut, S. Turenne (2014). Synthesis and characterization of bismuth telluride-based thermoelectric nanocomposites containing MoS2 nano-inclusionsMaterials Characterization, 95, p. 44-49. DOI : 10.1016/j.matchar.2014.05.011 
16 A. Behrang, M. Grmela, C. Dubois, S. Turenne, P.G. Lafleur, G. Lebon (2014). Effective heat conduction in dispersion of wiresApplied Physics Letters, 104(6), p. 063106. DOI : 10.1063/1.4865093 
17 A. Behrang, M. Grmela, C. Dubois, P.G. Lafleur, G. Lebon, S. Turenne (2014). Effective heat conduction in hybrid sphere & wire nanodispersionsApplied Physics Letters, 104(23), p. 233111. DOI : 10.1063/1.4882279 
18 M. Picard, S. Turenne, D. Vasilevskiy, R.A. Masut (2013). Numerical simulation of performance and thermomechanical behavior of thermoelectric modules with segmented bismuth-telluride-based legs. Journal of Electronic Materials, 42(7), p. 2343-2349.
19 M.K. Keshavarz, D. Vasilevskiy, R.A. Masut, S. Turenne (2013). P-Type bismuth telluride based composite thermoelectric materials produced by mechanical alloying and hot extrusion. Journal of Electronic Materials, 42(7), p. 1429-1435.
20 A. Behrang, M. Grmela, C. Dubois, S. Turenne, P.G. Lafleur (2013). Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions. Journal of Applied Physics, 114(1).
21 J. Arreguin-Zavala, D. Vasilevskiy, S. Turenne, R.A. Masut (2013). Microwave sintering of Bi2Te3- and PbTe-based alloys: Structure and thermoelectric properties. Journal of Electronic Materials, 42(7), p. 1992-1998.
22 D. Vasilevskiy, R.A. Masut, S. Turenne (2012). Thermoelectric and Mechanical Properties of Novel Hot-Extruded PbTe N-Type Material. Journal of Electronic Materials, 41(6), p. 1057-1061.
23 A. Martel, J. Arreguin-Zavala, A. Benaissa, S. Turenne, B. Julien (2012). Conventional and microwave sintering of MoSi2 nanostructured powder : Powder and parts characterisationPowder Metallurgy, 55(3), p. 206-211. DOI : 10.1179/1743290111Y.0000000008 
24 S. Kashi, M.K. Keshavarz, D. Vasilevskiy, R.A. Masut, S. Turenne (2012). Effect of Surface Preparation on Mechanical Properties of Ni Contacts on Polycrystalline (Bi(1-X)Sbx)(2)(Te1-Y Se-Y)(3) Alloys. Journal of Electronic Materials, 41(6), p. 1227-1231.
25 J. Arreguin-Zavala, S. Turenne, A. Martel, A. Benaissa (2012). Microwave Sintering of MoSi2-Mo5Si3 to Promote a Final Nanometer-Scale Microstructure and Suppressing of Pesting Phenomenon. Materials Characterization, 68, p. 117-122.
26 D. Vasilevskiy, O. Bourbia, S. Gosselin, S. Turenne, R.A. Masut (2011). Nanostructure characterization of bismuth telluride-based powders and extruded alloys by various experimental methods. Journal of Electronic Materials, 40, p. 1046-1051.
27 C. Andre, D. Vasilevskiy, S. Turenne, R.A. Masut (2011). Increase in the density of states in n-type extruded (Bi(1-x)Sbx)2(Te(1-y)Sey)3 thermoelectric alloys. Journal of Physics D: Applied Physics, 44(23), p. 235401.
28 D. Vasilevskiy, M.S. Dawood, J.-P. Masse, S. Turenne, R.A. Masut (2010). Generation of nanosized particles during mechanical alloying and their evolution through the hot extrusion process in bismuth-telluride-based alloys. Journal of Electronic Materials, 39(9), p. 1890-1896.
29 S. Turenne, T. Clin, D. Vasilevskiy, R.A. Masut (2010). Finite element thermomechanical modeling of large area thermoelectric generators based on bismuth telluride alloys. Journal of Electronic Materials, 39(9), p. 1926-1933.
30 B. Julien, M. Ste-Marie, R. Pelletier, F. Lapointe, S. Turenne (2010). Parametric modeling of MIM as-sintered properties of stainless steel 17-4PH and 316L using a statistical model. 2010 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2010, p. 41-410.
31 O. Scalzo, S. Turenne, M. Gauthier, V. Brailovski (2009). Mechanical and microstructural characterization of porous NiTi shape memory alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 40(9), p. 2061-2070.
32 F. Lapointe, S. Turenne, B. Julien (2009). Low viscosity feedstocks for powder injection moulding. Powder Metallurgy, 52(4), p. 338-344.
33 T. Clin, S. Turenne, D. Vasilevskiy, R.A. Masut (2009). Numerical simulation of the thermomechanical behavior of extruded bismuth telluride alloy module. Journal of Electronic Materials, 38(7), p. 994-1001.
34 C. Andre, D. Vasilevskiy, S. Turenne, R.A. Masut (2009). Extruded bismuth-telluride-based n-type alloys for waste heat thermoelectric recovery applications. Journal of Electronic Materials, 38(7), p. 1061-1067.
35 D. Vasilevskiy, S. Turenne, R.A. Masut (2008). Thermoelectric extruded alloys for module manufacturing : 10 years of development at École Polytechnique de Montréal. 5th European Conference on Thermoelectrics.
36 D. Vasilevskiy, F. Roy, E. Renaud, R.A. Masut, S. Turenne (2006). Mechanical Properties of the Interface Between Nickel Contact and Extruded (Bi1-xSbx)2(Te1-ySey)3. 25th International Conference on Thermoelectrics, p. 666-669.
37 S.D. Prokoshkin, A.V. Korotitskiy, A.V. Tamonov, I.Y. Khmelevskaya, V. Brailovski, S. Turenne (2006). Comparative X-Ray and Time-of-Flight Neutron Diffraction Studies of Martensite Crystal Lattice in Stressed and Unstressed Binary Ti-Ni Alloys. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 438, p. 549-552.
38 D. Vasilevskiy, V. Semenyuk, S. Turenne (2005). Properties of cooling modules produced form (Bi,Sb)2(Te,Se)3 hot extruded alloys. 3rd European conference on thermoelectrics.
39 D. Vasilevskiy, P. Frechette, S. Turenne, R.A. Masut (2005). Thermoelectric properties and transport phenomena in (Bi1-xSbx)2(Te1-ySey)3 quaternary n-type alloys produced by powder metallurgy and extrusion. 2005 24th International Conference on Thermoelectrics (ICT), p. 399-402.
40 S.D. Prokoshkin, A.V. Korotitskiy, V. Brailovski, S. Turenne, I.Y. Khmelevskaya, I.B. Trubitsyna (2004). On the Lattice Parameters of Phases in Binary Ti-Ni Shape Memory Alloys. Acta Materialia, 52(15), p. 4479-4492.
41 S.D. Prokoshkin, I.Y. Khmelevskaya, V. Brailovski, F. Trochu, S. Turenne, V.Y. Turilina (2004). Thermomechanical treatments and their influence on the microstructure and stress/strain diagrams of NiTi shape memory alloys. Canadian Metallurgical Quarterly, 43(1), p. 95-108.
42 M. Brochu, S. Turenne (2004). Experimental method for determining densification function of metal powder and its validity. Powder Metallurgy, 47(1), p. 55-59.
43 S. Turenne, F. Bélanger, J.M. Simard (2003). PM trims costs and speeds production of sensor materials. Metal powder report, 58(7), p. 46-50.
44 S. Turenne (2003). Characterization of shape memory alloys. Shape memory alloys: fundamentals, modeling and applications. Montréal: École de technologie supérieure. p. 131-178.
45 F. Trochu, S. Turenne (2003). Fatigue and degradation. Shape memory alloys: fundamentals, modeling and applications. Montréal: École de technologie supérieure. p. 311-342.
46 J.M. Simard, D. Vasilevskiy, S. Turenne (2003). Influence of composition and texture on the thermoelectric and mechanical properties of extruded (Bi1-xSbx)2 (Te1-ySey)3 alloys22nd international conference on thermoelectrics (ICT 2003), p. 13-18. DOI : 10.1109/ICT.2003.1287438 
47 S.D. Prokoshkin, I.Y. Khmelevskaya, V. Brailovski, F. Trochu, S. Turenne, V.Y. Turilina, K.E. Inaekyan (2003). Comparative study of structure and strain diagram changes in Ti-Ni alloys thermomechanically treated in martensitic or austenitic states. Journal de physique. IV, 112, p. 789-793.
48 S.D. Prokoshkin, V. Brailovskii, S. Turenne, I.Y. Khmelevskaya, A.V. Korotitskii, I.B. Trubitsyna (2003). On the Lattice Parameters of the B19 ' Martensite in Binary Ti-Ni Shape-Memory Alloys. Physics of Metals and Metallography, 96(1), p. 55-64.
49 S.D. Prokoshkin, V. Brailovski, S. Turenne, I.Y. Khmelevskaya, A.V. Korotitskiy, I.B. Trubitsyna (2003). Concentration, Temperature and Deformation Dependences of Martensite Lattice Parameters in Binary Ti-Ni Shape Memory Alloys. Journal de physique. IV, 112, p. 651-654.
50 D. Vasilevskiy, J.-M. Simard, F. Bélanger, F. Bernier, S. Turenne, J. L'Écuyer (2002). Texture formation in extruded rods of (BiSb)2(TeSe)3 thermoelectric alloys. 21st international conference on thermoelectrics ICT'02, p. 25-29.
51 S.D. Prokoshkin, V. Brailovski, S. Turenne, Y.I. Khmelevskaya, A.V. Korotitskiy, I.B. Trubitsyna (2002). Concentration temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys. ICOMAT'02.
52 R. Hernandez, S. Polizu, S. Turenne, L. Yahia (2002). Characteristics of Porous Nickel-Titanium Alloys for Medical Applications. Bio-Medical Materials and Engineering, 12(1), p. 37-45.
53 A. Beaulieu, L. Azzi, F. Ajersch, S. Turenne, F. Pineau, C.A. Loong (2001). Numerical modeling and experimental analysis of die cast semi-solidA356 alloy. Merton C. Flemings Symposium on Solidification and Materials Processing, p. 261-265.
54 S. Turenne, S. Prokoshkin, V. Brailovski, N. Sacépé (2000). Mechanical and X-Ray Characterisation of the Assisted Two-Way Shape Memory Effect in Niti. Canadian Metallurgical Quarterly, 39(2), p. 217-224.
55 S. Turenne, C. Godere, Y. Thomas (2000). Effect of Temperature on the Behaviour of Lubricants During Powder Compaction. Powder metallurgy, 43(2), p. 139-142.
56 S.D. Prokoshkin, S. Turenne, I.Y. Khmelevskaya, V. Brailovski, F. Trochu (2000). Structural Mechanisms of High-Temperature Shape Changes in Titanium-Nickel Alloys After Low-Temperature Thermomechanical Treatment. Canadian Metallurgical Quarterly, 39(2), p. 225-233.
57 S. Turenne, N. Legros, S. Laplante, F. Ajersch (1999). Mechanical Behavior of Aluminum Matrix Composite During Extrusion in the Semisolid State. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 30(4), p. 1137-1146.
58 S. Turenne, C. Godere, Y. Thomas, P.E. Mongeon (1999). Evaluation of friction conditions in powder compaction for admixed and die wall lubrication. Powder metallurgy, 42(3), p. 263-268.
59 F. Trochu, N. Sacépé, O. Volkov, S. Turenne (1999). Characterization of NiTi Shape Memory Alloys Using Dual Kriging Interpolation. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 275, p. 395-399.
60 N. Sacépé, S. Turenne, V. Brailovski (1999). Combined analysis of the assisted two-way shape memory effect in NiTi.. International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications as held at the 38th Annual Conference of Metallurgists of CIM, p. 305-319.
61 S. Laplante, N. Legros, F. Ajersch, B. Clément, S. Turenne (1996). Extrusion of thixocast semi-solid A356-12SiCp cylindrical sections. 4th int. conf. on semi-solid processing of alloys and composites, p. 301-305.

 

© École Polytechnique de Montréal
Find Peoble or units | Site plan | Key word search | Conditions(*) this link leads to a section in french.