Cossin, M., Ross, A., & Prince, F. (2023). A kinematic analysis of jumping technique in elite Korean teeterboard athletes: a case-study. Sports Biomechanics, 22(2), 246-254.
Répertoire des expertises
Ross, Annie
Répertoire des expertises
Ross, Annie
Répertoire des expertises
Publications par type
Article de revue (52)
Communication de conférence (44)
Livre
Chapitre de livre
Brevet (1)
Rapport
Thèse (1)
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Annie Ross (98)
- Articles de revue (52)
- 2023
Article de revue Article de revue Khalfi, B., Nasraoui, M. T., Chakhari, J., Ross, A., & Chafra, M. (2023). Dynamic behavior of cylindrical shell with partial constrained viscoelastic layer damping under an impact load. Acta Mechanica, 234(5), 2125-2143.Article de revue Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239.Article de revue Fernandez-Escudero, C., Prothin, S., Laurendeau, É., Ross, A., & Michon, G. (2023). Nonlinear flap for passive flutter control of bidimensional wing. JVC/Journal of Vibration and Control.Article de revue Cossin, M., Ross, A., & François, P. (2023). The influence of board bending and recoil effect on circus performance in Korean teeterboard. Applied Mechanics and Materials, 915, 71-80.Article de revue Cossin, M., Ross, A., & Prince, F. (2023). The Influence of the Board Bending and Recoil Effect on Circus Performance in Korean Teeterboard. Applied Mechanics and Materials, 915, 71-80.Article de revue Ben Lassoued, M. A., Ross, A., & Michon, G. (2023). Vibration confinement and localization patterns in weakly coupled oscillators with parameter gradients. Journal of Sound and Vibration, 549, 117590 (11 pages).
- 2022
Article de revue Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages).Article de revue Cossin, M., Bergeron-Parenteau, A., & Ross, A. (2022). Maximal dynamic forces exerted by acrobats on nine circus apparatuses. Circus: Arts, Life, and Sciences, 1(1).Article de revue Boulvert, J., Humbert, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2022). Perfect, broadband, and sub-wavelength absorption with asymmetric absorbers: Realization for duct acoustics with 3D printed porous resonators. Journal of Sound and Vibration, 523, 116687 (21 pages).
- 2021
Article de revue Brzeski, D., Hia, I. L., Chauvette, J.-F., Farahani, R. D., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages.Article de revue Cossin, M., Ross, A., & Prince, F. (2021). Effect of jump heights, landing techniques, and participants on vertical ground reaction force and loading rate during landing on three different Korean teeterboards. Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology, 1754337121 (9 pages).
- 2020
Article de revue Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E.-R., Romero-García, V., Gabard, G., Ross, A., Mardjono, J., & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages.Article de revue Oulmane, A., & Ross, A. (2020). Effects of material parameters on the transient dynamics of an impacted plate with partial constrained layer damping treatment. Journal of the Acoustical Society of America, 147(3), 1939-1952.Article de revue Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Perna, M., Mardjono, J., & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages.Article de revue Aujogue, N., Ross, A., & Attendu, J.-M. (2020). Time-space domain nearfield acoustical holography for visualizing normal velocity of sources. Mechanical Systems and Signal Processing, 139, 106363 (13 pages).
- 2019
Article de revue Fotsing, E.-R., Rezabeigi, E., Ross, A., Wood-Adams, P. M., & Drew, R. A. L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794.Article de revue Fotsing, E.-R., Dubourg, A., Ross, A., & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331.Article de revue Butler, S., Fotsing, E. -R., & Ross, A. (2019). Acoustic thermoset open-cell foams produced by particulate leaching process. Journal of Materials Science, 54(19), 12553-12572.Article de revue Pichon, H., Piollet, E., & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18.Article de revue Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Michon, G., & Ross, A. (2019). Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity. Journal of Fluids and Structures, 91, 12 pages.Article de revue Piollet, E., Fotsing, E.-R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366.Article de revue Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages.
- 2018
Article de revue Cossin, M., Ross, A., & Gosselin, F. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235.Article de revue Attendu, J.-M., & Ross, A. (2018). Sparse regularization for reconstructing transient sources with time domain nearfield acoustical holography. Journal of the Acoustical Society of America, 143(6), 3796-3806.Article de revue Attendu, J.-M., & Ross, A. (2018). Time domain nearfield acoustical holography with three-dimensional linear deconvolution. Journal of the Acoustical Society of America, 143(3), 1672-1683.
- 2017
Article de revue Boudreault, Y., Carré, C., Farand, P., Forest, L., Lafleur, P., & Ross, A. (2017). Différentes méthodes d'apprentissage actif pour une diversité d'apprenants. Proceedings of the Canadian Engineering Education Association (CEEA), 5 pages.Article de revue Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N., & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157.Article de revue Cossin, M., Ross, A., & Gosselin, F. (2017). Making single-point aerial circus disciplines safer. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231(4), 362-373.Article de revue Attendu, J.-M., & Ross, A. (2017). Method for finding optimal exponential decay coefficient in numerical Laplace transform for application to linear convolution. Signal Processing, 130, 47-56.Article de revue Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304.Article de revue Attendu, J. M., & Ross, A. (2017). Time domain nearfield acoustical holography without wrap-around error and spectral leakage for forward propagation. Journal of the Acoustical Society of America, 141(2), 1039-1050.
- 2016
Article de revue Sommier, E., Fotsing, E.-R., Ross, A., & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79.Article de revue Fotsing, E. R., Leclerc, C., Sola, M., Ross, A., & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239.Article de revue Khalfi, B., & Ross, A. (2016). Transient and harmonic response of a sandwich with partial constrained layer damping: A parametric study. Composites Part B: Engineering, 91, 44-45.
- 2015
Article de revue Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74.
- 2014
Article de revue Fotsing, E. R., Ross, A., & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39.Article de revue Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825.
- 2013
Article de revue Khalfi, B., & Ross, A. (2013). Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich. International Journal of Solids and Structures, 50(25-26), 4133-4144.Article de revue Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511.Article de revue Khalfi, B., & Ross, A. (2013). Transient response of a plate with partial constrained viscoelastic layer damping. International Journal of Mechanical Sciences, 68, 304-312.
- 2012
Article de revue Fotsing, E. R., Miron, F., Eury, Y., Ross, A., & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093.
- 2009
Article de revue Granger, D., & Ross, A. (2009). Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams: experimental and numerical results. Journal of Sound and Vibration, 321(1-2), 45-64.Article de revue Blais, J.-F., & Ross, A. (2009). Forward projection of transient sound pressure fields radiated by impacted plates using numerical Laplace transform. Journal of the Acoustical Society of America, 125(5), 3120-3128.Article de revue Blais, J.-F., Cimmino, M., Ross, A., & Granger, D. (2009). Suppression of time aliasing in the solution of the equations of motion of an impacted beam with partial constrained layer damping. Journal of Sound and Vibration, 326(3-5), 870-882.Article de revue Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204.
- 2008
Article de revue Mahvash, A., & Ross, A. (2008). Application of Chmms to Two-Phase Flow Pattern Identification. Engineering Applications of Artificial Intelligence, 21(8), 1144-1152.Article de revue Mahvash, A., & Ross, A. (2008). Two-Phase Flow Pattern Identification Using Continuous Hidden Markov Model. International Journal of Multiphase Flow, 34(3), 303-311.
- 2007
Article de revue Gravelle, A., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2007). Damping of Tubes Due to Internal Two-Phase Flow. Journal of Fluids and Structures, 23(3), 447-462.Article de revue Ross, A., & Ostiguy, G. (2007). Propagation of the Initial Transient Noise From an Impacted Plate. Journal of Sound and Vibration, 301(1-2), 28-42.
- 2001
Article de revue Ross, A., Amram, M., & Ostiguy, G. L. (2001). Benefits of Vac Damps over adhesive bonded damping pads for impact noise control. Applied Acoustics, 62(7), 813-830.
- 1999
Article de revue Ross, A., Ostiguy, G. L., & Amram, M. (1999). New signal processing developments for low cost near-field acoustical holography systems. Noise Control Engineering Journal, 47(1), 28-44.
- 2023
- Communications de conférence (44)
- 2023
Communication de conférence Rastegar, N., De Cicco, D., Vidal, D., & Ross, A. (octobre 2023). Accoustic metamaterials for low-frequency noise resuction : a review [Communication écrite]. Acoustics Week in Canada 2023 Conference (AWC 2023), Montréal, Québec. Publié dans Canadian Acoustics, 51(3).Communication de conférence Choudhary, R., Rzig, I., Roland-Fotsing, E., & Ross, A. (juillet 2023). Investigation of the electromechanical coupling nonlinearity in piezoelectric energy harvester [Communication écrite]. 29th International Congress on Sound and Vibration (IIAV 2023), Prague, Tcheque Republic (8 pages).
- 2022
Communication de conférence Choudhary, R., Rzig, I., Fotsing, E. R., & Ross, A. (juillet 2022). Investigation of the effect of piezoelectric material nonlinearity on unimorph energy harvester [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022), Singapore.Communication de conférence Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (juillet 2022). Multilayered microchannels for high absorption at different frequency ranges [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022).
- 2021
Communication de conférence Boulvert, J., Té, H., Romero-García, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J. P. (septembre 2021). Asymmetric Metaporous Treatment: Optimization for Perfect Sound Absorption, 3D Printing, and Characterization with Air Flow [Communication écrite]. 15th International Congress on Artificial Materials for Novel Wave Phenomena (METAMATERIALS 2021), New York, N.Y..Communication de conférence Boulvert, J., Costa-Baptista, J., Fotsing, E.-R., Cavalieri, T., Romera-García, V., Gabard, G., Ross, A., Mardjono, J., & Croby, J.-P. (mars 2021). 3D printed folded porous material for sub-wavelength absorption of sound [Communication écrite]. 6th Symposium on the Accoustics of Poro-Elastic Materials (SAPEM 2020) (2 pages).Communication de conférence Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (août 2021). Multilayer treatment for subwavelength and broad absorption [Communication écrite]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA.
- 2019
Communication de conférence Butler, S., Fotsing, E. R., & Ross, A. (juillet 2019). Acoustic thermoset open-cell multilayer foams produced by a particulate leaching process [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Fernandez-Escudero, C., Gagnon, M., Laurendeau, É., Prothin, S., Ross, A., & Michon, G. (janvier 2019). Experimental and Numerical Aeroelastic Analysis of Airfoil-Aileron System with Nonlinear Energy Sink [Communication écrite]. 37th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, FL, United states.Communication de conférence Costa-Baptista, J., Fotsing, E. R., Therriault, D., & Ross, A. (juillet 2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Lassoued, M. A. B., Abbad, A., Ross, A., & Michon, G. (juillet 2019). Numerical and experimental vibration of a sandwich beam with a functionally graded core [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Boulvert, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E. R., Ross, A., Mardjono, J., & Groby, J.-P. (juillet 2019). Numerical optimization method of continuously graded porous material [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Abbad, A., Lassoued, M.-A. B., Michon, G., & Ross, A. (juillet 2019). On the use of 3D printed architected core in sandwich structure for vibration control [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Aujogue, N., & Ross, A. (juillet 2019). Transient force analysis technique to identify time-varying loads and defects on plates [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Communication de conférence Pichon, H., Piollet, E., & Ross, A. (juillet 2019). Visualizing trade-offs to improve multilayer acoustic package design [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.
- 2018
Communication de conférence Ruiz, E., Pupin, C., Ross, A., Dubois, C., & Rietsch, J. C. (octobre 2018). Solving porosity growth during composite manufacturing [Communication écrite]. 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states.
- 2016
Communication de conférence Piollet, E., Laroche, S., Bianki, M.-A., & Ross, A. (août 2016). A mobile reverberation cabin for acoustic measurements in an existing anechoic room [Communication écrite]. 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE 2016), Hamburg, Germany.Communication de conférence Letarte, A., Joncas, S., Ross, A., & Martin, F. (janvier 2016). Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing [Communication écrite]. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (AIAA SciTech 2016), San Diego, CA.Communication de conférence Attendu, J.-M., & Ross, A. (août 2016). Time-domain near-field acoustical holography as a means to prevent exposition to harmful industrial impact noises [Communication écrite]. 24e Congrès international de mécanique théorique et appliquée (ICTAM 2016), Montréal, Québec.
- 2015
Communication de conférence Pupin, C., Ross, A., Ruiz, E., Billotte, C., Rietsch, J.-C., Bricourt, P., & Vernet, N. (juillet 2015). Porosity control by process parameters [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
- 2014
Communication de conférence Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states.
- 2013
Communication de conférence Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.Communication de conférence Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.Communication de conférence Leclerc, C., Fotsing, E. R., & Ross, A. (juillet 2013). Modal analysis of composite sandwich structures with viscoelastic layers [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
- 2011
Communication de conférence Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (juin 2011). Facteurs d'influence des choix d'études en génie dees femmes [Communication écrite]. Colloque international HELENA Formation interdisciplinaire des ingénieurs et problème du genre (GIEE 2011), Paris, France.Communication de conférence Fotsing, R., Sola, M., Ross, A., & Ruiz, E. (juillet 2011). Lightweight damping treatment of composite sandwich beams [Communication écrite]. 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil.
- 2009
Communication de conférence Nowlan, I., Ross, A., & Pettigrew, M. J. (juillet 2009). Dynamic interaction between a straight tube and an anti-vibration bar [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic.Communication de conférence Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic.Communication de conférence Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A., & Bernandini, N. (novembre 2009). La chaire Marianne-Mareschal à l'École Polytechnique de Montréal [Communication écrite]. 2nd International PROMETEA Conference, Paris, France.
- 2008
Communication de conférence Nowlan, I., Ross, A., & Pettigrew, M. J. (juin 2008). Dynamics of a steam generator tube supported by an anti-vibration bar [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic.Communication de conférence Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic.Communication de conférence Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic.
- 2006
Communication de conférence Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages).
- 2005
Communication de conférence Oulmane, A., Farah, É., & Ross, A. (mai 2005). Dynamic modeling of a viscoelastic sandwich [Communication écrite]. 20e Congrès canadien de mécanique appliquée, Montréal, Québec.
- 2004
Communication de conférence Ross, A., & Boudreau, M.-J. (octobre 2004). Expériences sur le niveau de bruit des ventilateurs domestiques personnels [Communication écrite]. Semaine canadienne d'acoustique, Ottawa.Communication de conférence Ross, A., & Cormier, M. (juillet 2004). Natural frequencies of a discontinuous viscoelastic sandwich [Communication écrite]. 11th International Congress on Sound and Vibration, St-Petersbourg, Russie.Communication de conférence Ross, A., & Roy, J.-F. (juillet 2004). Vibration of the constraining layer of a surface damping pad [Communication écrite]. 11th International Congress on Sound and Vibration, St-Petersbourg, Russie.
- 2003
Communication de conférence Ross, A., Ostiguy, G., & Amram, M. (janvier 2003). Délimitation du bruit d'accélération provenant d'une structure flexible [Communication écrite]. 19e Congrès canadien de mécanique appliquée, Calgary, Canada.Communication de conférence Roy, J. F., Ross, A., & Ostiguy, G. (janvier 2003). On the effects of vacuum applied damping Ppds on flexural wave speed [Communication écrite]. 19e Congrès canadien de mécanique appliquée, Calgary, Canada.
- 2002
Communication de conférence Roy, J.-F., & Ross, A. (juillet 2002). Observation of the acoustic and flexural waves reflected upon the thickness discontinuity of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando, Florida.Communication de conférence Ross, A., Roy, J.-F., & Ostiguy, G. (octobre 2002). On the mechanical behaviour of vacuum applied surface treatments [Communication écrite]. Semaine canadienne d'acoustique, Charlottetown, P.E.I..Communication de conférence Ross, A., Ostiguy, G., & Amram, M. (janvier 2002). Properties of the transient acoustic field of an impacted plate [Communication écrite]. 9th International Congress on Sound and Vibration, Orlando. Florida.
- 2001
Communication de conférence Ross, A., Ostiguy, G., & Amram, M. (janvier 2001). Effets d'une discontinuité d'épaisseur sur la propagation des ondes de flexion [Communication écrite]. 18e Congrès canadien de mécanique appliquée, Newfoundland.Communication de conférence Amram, M., Ross, A., & Ostiguy, G. (janvier 2001). Impact noise control by microfriction damping using vaccum applied dampers called [Communication écrite]. 8th International Congress on Sound and Vibration, Hong Kong.
- 2023
- Brevets (1)
- 2020
Brevet Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A., & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method. [Panneau acoustique et procédé de fabrication associé]. (Demande de brevet no CA3084631).
- 2020
- Thèses (1)
- 2000
Thèse Ross, A. (2000). Visualisation et optimisation des effets des vac damps sur le champ vectoriel d'intensité acoustique d'une structure soumise à des impacts répétés [Thèse de doctorat, École Polytechnique de Montréal].
- 2000