Costa-Baptista, J., Fotsing, E.R., Mardjono, J., Therriault, D. & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 17 pages. Retrieved from https://doi.org/10.1016/j.addma.2022.102777
Directory of Experts
Ross, Annie

Directory of Experts
Ross, Annie
Directory of Experts
Publications by type
Journal article (44)
Conference paper (41)
Book
Book chapter
Patent (1)
Report
Thesis (1)
Dataset
Teaching resource
Image
Audio recording
Video recording
Other
Annie Ross (87)
- Journal articles (44)
- 2022
Journal article Journal article Boulvert, J., Humbert, T., Romero-Garcia, V., Gabard, G., Fotsing, E.R., Ross, A., Mardjono, J. & Groby, J.-P. (2022). Perfect, broadband, and sub-wavelength absorption with asymmetric absorbers: Realization for duct acoustics with 3D printed porous resonators. Journal of Sound and Vibration, 523, 21 pages. Retrieved from https://doi.org/10.1016/j.jsv.2021.116687
- 2021
Journal article Cossin, M., Ross, A. & Prince, F. (2021). A kinematic analysis of jumping technique in elite Korean teeterboard athletes: a case-study. Sports Biomechanics, 9 pages. Retrieved from https://doi.org/10.1080/14763141.2021.2018030Journal article Brzeski, D., Hia, I.L., Chauvette, J.-F., Farahani, R.D., Piccirelli, N., Ross, A. & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. Retrieved from https://doi.org/10.1016/j.addma.2021.102245Journal article Cossin, M., Ross, A. & Prince, F. (2021). Effect of jump heights, landing techniques, and participants on vertical ground reaction force and loading rate during landing on three different Korean teeterboards. Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology, 9 pages. Retrieved from https://doi.org/10.1177/17543371211058031
- 2020
Journal article Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E.R., Romero-Garcia, V., Gabard, G., Ross, A., Mardjono, J. & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages. Retrieved from https://doi.org/10.1016/j.apacoust.2020.107244Journal article Oulmane, A. & Ross, A. (2020). Effects of material parameters on the transient dynamics of an impacted plate with partial constrained layer damping treatment. Journal of the Acoustical Society of America, 147(3), 1939-1952. Retrieved from https://doi.org/10.1121/10.0000890Journal article Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.R., Ross, A., Perna, M., Mardjono, J. & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages. Retrieved from https://doi.org/10.1063/5.0032809Journal article Aujogue, N., Ross, A. & Attendu, J.-M. (2020). Time-space domain nearfield acoustical holography for visualizing normal velocity of sources. Mechanical Systems and Signal Processing, 139, 13 pages. Retrieved from https://doi.org/10.1016/j.ymssp.2019.106363
- 2019
Journal article Fotsing, E.R., Rezabeigi, E., Ross, A., Wood-Adams, P.M. & Drew, R.A.L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794. Retrieved from https://doi.org/10.1007/s10934-019-00775-1Journal article Fotsing, E.R., Dubourg, A., Ross, A. & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331. Retrieved from https://doi.org/10.1016/j.apacoust.2018.12.030Journal article Butler, S., Fotsing, E.R. & Ross, A. (2019). Acoustic thermoset open-cell foams produced by particulate leaching process. Journal of Materials Science, 54(19), 12553-12572. Retrieved from https://doi.org/10.1007/s10853-019-03790-4Journal article Pichon, H., Piollet, E. & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18. Retrieved from https://doi.org/10.1016/j.apacoust.2018.12.003Journal article Fernandez-Escudero, C., Gagnon, M., Laurendeau, E., Prothin, S., Michon, G. & Ross, A. (2019). Comparison of low, medium and high fidelity numerical methods for unsteady aerodynamics and nonlinear aeroelasticity. Journal of Fluids and Structures, 91, 12 pages. Retrieved from https://doi.org/10.1016/j.jfluidstructs.2019.102744Journal article Piollet, E., Fotsing, E.R., Ross, A. & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. Retrieved from https://doi.org/10.1016/j.compositesb.2019.03.029Journal article Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E.R., Ross, A., Mardjono, J. & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages. Retrieved from https://doi.org/10.1063/1.5119715
- 2018
Journal article Cossin, M., Ross, A. & Gosselin, F.P. (2018). Repeatability of force signals in aerial circus straps. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 232(3), 225-235. Retrieved from https://doi.org/10.1177/1754337117732901Journal article Attendu, J.-M. & Ross, A. (2018). Sparse regularization for reconstructing transient sources with time domain nearfield acoustical holography. Journal of the Acoustical Society of America, 143(6), 3796-3806. Retrieved from https://doi.org/10.1121/1.5043088Journal article Attendu, J.-M. & Ross, A. (2018). Time domain nearfield acoustical holography with three-dimensional linear deconvolution. Journal of the Acoustical Society of America, 143(3), 1672-1683. Retrieved from https://doi.org/10.1121/1.5027841
- 2017
Journal article Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C., Vernet, N. & Ruiz, E. (2017). Formation and suppression of volatile-induced porosities in an RTM epoxy resin. Composites Part A: Applied Science and Manufacturing, 94, 146-157. Retrieved from https://doi.org/10.1016/j.compositesa.2016.12.006Journal article Cossin, M., Ross, A. & Gosselin, F.P. (2017). Making single-point aerial circus disciplines safer. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231(4), 362-373. Retrieved from https://doi.org/10.1177/1754337117705478Journal article Attendu, J.-M. & Ross, A. (2017). Method for finding optimal exponential decay coefficient in numerical Laplace transform for application to linear convolution. Signal Processing, 130, 47-56. Retrieved from https://doi.org/10.1016/j.sigpro.2016.03.029Journal article Pupin, C., Ross, A., Dubois, C., Rietsch, J.-C. & Ruiz, E. (2017). Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map. Composites Part A: Applied Science and Manufacturing, 100, 294-304. Retrieved from https://doi.org/10.1016/j.compositesa.2017.05.023Journal article Attendu, J.M. & Ross, A. (2017). Time domain nearfield acoustical holography without wrap-around error and spectral leakage for forward propagation. Journal of the Acoustical Society of America, 141(2), 1039-1050. Retrieved from https://doi.org/10.1121/1.4976072
- 2016
Journal article Sommier, E., Fotsing, E.-R., Ross, A. & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79. Retrieved from https://doi.org/10.1177/0095244314538439Journal article Fotsing, E.R., Leclerc, C., Sola, M., Ross, A. & Ruiz, E. (2016). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Composites Part B: Engineering, 88, 229-239. Retrieved from https://doi.org/10.1016/j.compositesb.2015.10.037Journal article Khalfi, B. & Ross, A. (2016). Transient and harmonic response of a sandwich with partial constrained layer damping: A parametric study. Composites Part B: Engineering, 91, 44-45. Retrieved from https://doi.org/10.1016/j.compositesb.2015.12.037
- 2015
Journal article Charreton, C., Béguin, C., Ross, A., Étienne, S. & Pettigrew, M.J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74. Retrieved from https://doi.org/10.1016/j.jfluidstructs.2015.03.022
- 2014
Journal article Fotsing, E.R., Ross, A. & Ruiz, E. (2014). Characterization of surface defects on composite sandwich materials based on deflectrometry. NDT & E International, 62, 29-39. Retrieved from https://doi.org/10.1016/j.ndteint.2013.11.004Journal article Fotsing, E.R., Sola, M., Ross, A. & Ruiz, E. (2014). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. Retrieved from https://doi.org/10.1177/0021998313514254
- 2013
Journal article Khalfi, B. & Ross, A. (2013). Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich. International Journal of Solids and Structures, 50(25-26), 4133-4144. Retrieved from https://doi.org/10.1016/j.ijsolstr.2013.07.023Journal article Fotsing, E.R., Sola, M., Ross, A. & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. Retrieved from https://doi.org/10.1177/0021998312449027Journal article Khalfi, B. & Ross, A. (2013). Transient response of a plate with partial constrained viscoelastic layer damping. International Journal of Mechanical Sciences, 68, 304-312. Retrieved from https://doi.org/10.1016/j.ijmecsci.2013.01.032
- 2012
Journal article Fotsing, E.R., Miron, F., Eury, Y., Ross, A. & Ruiz, E. (2012). Bonding Analysis of Carbon/Epoxy Composites With Viscoelastic Acrylic Adhesive. Composites Part B: Engineering, 43(5), 2087-2093. Retrieved from https://doi.org/10.1016/j.compositesb.2012.03.009
- 2009
Journal article Granger, D. & Ross, A. (2009). Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams: experimental and numerical results. Journal of Sound and Vibration, 321(1-2), 45-64. Retrieved from https://doi.org/10.1016/j.jsv.2008.09.039Journal article Blais, J.-F. & Ross, A. (2009). Forward projection of transient sound pressure fields radiated by impacted plates using numerical Laplace transform. Journal of the Acoustical Society of America, 125(5), 3120-3128. Retrieved from https://doi.org/10.1121/1.3097765Journal article Blais, J.-F., Cimmino, M., Ross, A. & Granger, D. (2009). Suppression of time aliasing in the solution of the equations of motion of an impacted beam with partial constrained layer damping. Journal of Sound and Vibration, 326(3-5), 870-882. Retrieved from https://doi.org/10.1016/j.jsv.2009.06.001Journal article Beguin, C., Anscutter, F., Ross, A., Pettigrew, M.J. & Mureithi, N.W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204. Retrieved from https://doi.org/10.1016/j.jfluidstructs.2008.03.011
- 2008
Journal article Mahvash, A. & Ross, A. (2008). Application of Chmms to Two-Phase Flow Pattern Identification. Engineering Applications of Artificial Intelligence, 21(8), 1144-1152. Retrieved from https://doi.org/10.1016/j.engappai.2008.02.005Journal article Mahvash, A. & Ross, A. (2008). Two-Phase Flow Pattern Identification Using Continuous Hidden Markov Model. International Journal of Multiphase Flow, 34(3), 303-311. Retrieved from https://doi.org/10.1016/j.ijmultiphaseflow.2007.08.006
- 2007
Journal article Gravelle, A., Ross, A., Pettigrew, M.J. & Mureithi, N.W. (2007). Damping of Tubes Due to Internal Two-Phase Flow. Journal of Fluids and Structures, 23(3), 447-462. Retrieved from https://doi.org/10.1016/j.jfluidstructs.2006.09.008Journal article Ross, A. & Ostiguy, G. (2007). Propagation of the Initial Transient Noise From an Impacted Plate. Journal of Sound and Vibration, 301(1-2), 28-42. Retrieved from https://doi.org/10.1016/j.jsv.2006.09.016
- 2001
Journal article Ross, A., Amram, M. & Ostiguy, G.L. (2001). Benefits of Vac Damps over adhesive bonded damping pads for impact noise control. Applied acoustics, 62(7), 813-830. Retrieved from https://doi.org/10.1016/S0003-682X(00)00079-7
- 1999
Journal article Ross, A., Ostiguy, G.L. & Amram, M. (1999). New signal processing developments for low cost near-field acoustical holography systems. Noise Control Engineering Journal, 47(1), 28-44. Retrieved from https://doi.org/10.3397/1.599285
- 2022
- Conference papers (41)
- 2022
Conference paper Costa-Baptista, J., Fotsing, E.R., Mardjano, J., Therriault , D. & Ross, A. (2022). Multilayered microchannels for high absorption at different frequency ranges. Paper presented at the 28th International Congress on Sound and Vibration (ICSV 2022).
- 2021
Conference paper Boulvert, J., Té, H., Romero-García, V., Gabard, G., Fotsing, E.R., Ross, A., Mardjono, J. & Groby, J.P. (2021). Asymmetric Metaporous Treatment: Optimization for Perfect Sound Absorption, 3D Printing, and Characterization with Air Flow. Paper presented at the 15th International Congress on Artificial Materials for Novel Wave Phenomena (METAMATERIALS 2021), New York, N.Y. (pp. 65-67). Retrieved from https://doi.org/10.1109/Metamaterials52332.2021.9577098Conference paper Boulvert, J., Costa-Baptista, J., Fotsing, E.R., Cavalieri, T., Romera-Garcia, V., Gabard, G., Ross, A., Mardjono, J. & Croby, J.-P. (2021). 3D printed folded porous material for sub-wavelength absorption of sound. Paper presented at the 6th Symposium on the Accoustics of Poro-Elastic Materials (SAPEM 2020) (2 pages). Retrieved from https://sapem2021.matelys.com/program.htmlConference paper Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D. & Ross, A. (2021). Multilayer treatment for subwavelength and broad absorption. Paper presented at the 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA (pp. 2219-2227). Retrieved from https://doi.org/10.3397/IN-2021-2076
- 2020
Conference paper Fernandez-Escudero, C., Gagnon, M., Laurendeau, E., Prothin, S., Ross, A. & Michon, G. (2020). Experimental and Numerical Aeroelastic Analysis of Airfoil-Aileron System with Nonlinear Energy Sink. Paper presented at the 37th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, FL, United states (pp. 133-135). Retrieved from https://doi.org/10.1007/978-3-030-12391-8_17
- 2019
Conference paper Butler, S., Fotsing, E.R. & Ross, A. (2019). Acoustic thermoset open-cell multilayer foams produced by a particulate leaching process. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Conference paper Costa-Baptista, J., Fotsing, E.R., Therriault, D. & Ross, A. (2019). Impact of 3D printed thin wall on Helmholtz resonator acoustic response: Experimental investigatations. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Conference paper Lassoued, M.A.B., Abbad, A., Ross, A. & Michon, G. (2019). Numerical and experimental vibration of a sandwich beam with a functionally graded core. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Conference paper Boulvert, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.R., Ross, A., Mardjono, J. & Groby, J.-P. (2019). Numerical optimization method of continuously graded porous material. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Conference paper Abbad, A., Lassoued, M.-A.B., Michon, G. & Ross, A. (2019). On the use of 3D printed architected core in sandwich structure for vibration control. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.Conference paper Aujogue, N. & Ross, A. (2019). Transient force analysis technique to identify time-varying loads and defects on plates. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Retrieved from https://www.iiav.org/icsv26/index.php?va=viewpage%26vaid=448Conference paper Pichon, H., Piollet, E. & Ross, A. (2019). Visualizing trade-offs to improve multilayer acoustic package design. Paper presented at the 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada.
- 2018
Conference paper Ruiz, E., Pupin, C., Ross, A., Dubois, C. & Rietsch, J.C. (2018). Solving porosity growth during composite manufacturing. Paper presented at the 5th Annual Composites and Advanced Materials Expo (CAMX 2018), Dallas, TX, United states. Retrieved from https://www.nasampe.org/store/viewproduct.aspx?id=12982230
- 2016
Conference paper Piollet, E., Laroche, S., Bianki, M.-A. & Ross, A. (2016). A mobile reverberation cabin for acoustic measurements in an existing anechoic room. Paper presented at the 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (INTER-NOISE 2016), Hamburg, Germany (pp. 1031-1042).Conference paper Letarte, A., Joncas, S., Ross, A. & Martin, F. (2016). Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing. Paper presented at the 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (AIAA SciTech 2016), San Diego, CA. Retrieved from https://doi.org/10.2514/6.2016-0203Conference paper Attendu, J.-M. & Ross, A. (2016). Time-domain near-field acoustical holography as a means to prevent exposition to harmful industrial impact noises. Paper presented at the 24e Congrès international de mécanique théorique et appliquée (ICTAM 2016), Montréal, Québec.
- 2015
Conference paper Pupin, C., Ross, A., Ruiz, E., Billotte, C., Rietsch, J.-C., Bricourt, P. & Vernet, N. (2015). Porosity control by process parameters. Paper presented at the 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
- 2014
Conference paper Charreton, C., Béguin, C., Ross, A., Etienne, S. & Pettigrew, M.J. (2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation. Paper presented at the ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Retrieved from https://doi.org/10.1115/PVP2014-28456
- 2013
Conference paper Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B. & Godon, T. (2013). Formation of porosities in RTM by VOCS and water vapour. Paper presented at the 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (pp. 8447-8457). Retrieved from http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/PUP81079.pdfConference paper Fotsing, E.R., Sola, M., Ruiz, E. & Ross, A. (2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities. Paper presented at the 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (pp. 1284-1295). Retrieved from http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FOT81384.pdfConference paper Leclerc, C., Fotsing, E.R. & Ross, A. (2013). Modal analysis of composite sandwich structures with viscoelastic layers. Paper presented at the 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec (pp. 260-269). Retrieved from http://www.iccm-central.org/Proceedings/ICCM19proceedings/papers/FOT81674.pdf
- 2011
Conference paper Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A. & Bernandini, N. (2011). Facteurs d'influence des choix d'études en génie dees femmes. Paper presented at the Colloque international HELENA Formation interdisciplinaire des ingénieurs et problème du genre (GIEE 2011), Paris, France. Retrieved from https://doi.org/10.1007/978-94-6091-982-4_12Conference paper Fotsing, R., Sola, M., Ross, A. & Ruiz, E. (2011). Lightweight damping treatment of composite sandwich beams. Paper presented at the 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil.
- 2010
Conference paper Nowlan, I., Ross, A. & Pettigrew, M.J. (2010). Dynamic interaction between a straight tube and an anti-vibration bar. Paper presented at the ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic (pp. 437-445). Retrieved from https://doi.org/10.1115/PVP2009-77804Conference paper Beguin, C., Wehbe, J., Ross, A., Pettigrew, M.J. & Mureithi, N.W. (2010). Influence of viscosity, density and surface tension on two-phase damping. Paper presented at the ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic (pp. 247-257). Retrieved from https://doi.org/10.1115/PVP2009-77423
- 2009
Conference paper Lacroix, S., De Marcellis-Warin, N., Riopel, D., Ross, A. & Bernandini, N. (2009). La chaire Marianne-Mareschal à l'École Polytechnique de Montréal. Paper presented at the 2nd International PROMETEA Conference, Paris, France.
- 2008
Conference paper Nowlan, I., Ross, A. & Pettigrew, M.J. (2008). Dynamics of a steam generator tube supported by an anti-vibration bar. Paper presented at the 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic (pp. 247-252). Retrieved from https://flair.monash.edu.au/intranet/proceedings/fiv2008/html/pdf/223.pdfConference paper Béguin, C., Ross, A., Pettigrew, M.J. & Langre, E. (2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow. Paper presented at the 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic (pp. 613-618). Retrieved from https://flair.monash.edu.au/intranet/proceedings/fiv2008/html/pdf/222.pdfConference paper Béguin, C., Ross, A., Pettigrew, M.J. & Mureithi, N.W. (2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow. Paper presented at the 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic (pp. 619-624). Retrieved from https://flair.monash.edu.au/intranet/proceedings/fiv2008/html/pdf/221.pdf
- 2006
Conference paper Anscutter, F., Beguin, C., Ross, A., Pettigrew, M.J. & Mureithi, N.W. (2006). Two-phase damping and interface surface area in tubes with internal flow. Paper presented at the ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). Retrieved from https://doi.org/10.1115/PVP2006-ICPVT-11-93878
- 2005
Conference paper Oulmane, A., Farah, É. & Ross, A. (2005). Dynamic modeling of a viscoelastic sandwich. Paper presented at the 20e Congrès canadien de mécanique appliquée, Montréal, Québec (pp. 523-524).
- 2004
Conference paper Ross, A. & Boudreau, M.-J. (2004). Expériences sur le niveau de bruit des ventilateurs domestiques personnels. Paper presented at the Semaine canadienne d'acoustique, Ottawa. Retrieved from https://jcaa.caa-aca.ca/index.php/jcaa/article/viewFile/1651/1398Conference paper Ross, A. & Cormier, M. (2004). Natural frequencies of a discontinuous viscoelastic sandwich. Paper presented at the 11th International Congress on Sound and Vibration, St-Petersbourg, Russie (pp. 1983-1990).Conference paper Ross, A. & Roy, J.-F. (2004). Vibration of the constraining layer of a surface damping pad. Paper presented at the 11th International Congress on Sound and Vibration, St-Petersbourg, Russie (pp. 3597-3604).
- 2003
Conference paper Ross, A., Ostiguy, G. & Amram, M. (2003). Délimitation du bruit d'accélération provenant d'une structure flexible. Paper presented at the 19e Congrès canadien de mécanique appliquée, Calgary, Canada (pp. 372-373).Conference paper Roy, J.F., Ross, A. & Ostiguy, G. (2003). On the effects of vacuum applied damping Ppds on flexural wave speed. Paper presented at the 19e Congrès canadien de mécanique appliquée, Calgary, Canada (pp. 370-371).
- 2002
Conference paper Roy, J.-F. & Ross, A. (2002). Observation of the acoustic and flexural waves reflected upon the thickness discontinuity of an impacted plate. Paper presented at the 9th International Congress on Sound and Vibration, Orlando, Florida.Conference paper Ross, A., Roy, J.-F. & Ostiguy, G. (2002). On the mechanical behaviour of vacuum applied surface treatments. Paper presented at the Semaine canadienne d'acoustique, Charlottetown, P.E.I. (pp. 62-63). Retrieved from https://jcaa.caa-aca.ca/index.php/jcaa/article/view/1455/1199Conference paper Ross, A., Ostiguy, G. & Amram, M. (2002). Properties of the transient acoustic field of an impacted plate. Paper presented at the 9th International Congress on Sound and Vibration, Orlando. Florida.
- 2001
Conference paper Ross, A., Ostiguy, G. & Amram, M. (2001). Effets d'une discontinuité d'épaisseur sur la propagation des ondes de flexion. Paper presented at the 18e Congrès canadien de mécanique appliquée, Newfoundland (pp. 51-52).Conference paper Amram, M., Ross, A. & Ostiguy, G. (2001). Impact noise control by microfriction damping using vaccum applied dampers called. Paper presented at the 8th International Congress on Sound and Vibration, Hong Kong (pp. 2591-2598).
- 2022
- Patents (1)
- 2020
Patent Therriault, D., Iervolino, F., Pierre, J., Piccirelli, N., Ross, A. & Costa Baptista, J. (2020). Acoustic panel and associated manufacturing method (Patent No CA 3084631 - Application). Retrieved from https://patents.google.com/patent/CA3084631
- 2020
- Theses (1)
- 2000
Thesis Ross, A. (2000). Visualisation et optimisation des effets des vac damps sur le champ vectoriel d'intensité acoustique d'une structure soumise à des impacts répétés (Ph.D. Thesis, École Polytechnique de Montréal).
- 2000