Directory of Experts

Mayer, J. R. René

Directory of Experts

Mayer, J. R. René

Directory of Experts

Publications by type

Journal article (90) Conference paper (64) Book Book chapter (4) Patent Report Thesis Dataset Teaching resource Image Audio recording Video recording Other

René Mayer (158)

Journal articles (90)
- 2025
  - Bennoune, R., Chen, G., Tagne, S.-C. T., Vissière, A., Damak, M., Mehdi-Souzani, C., Anwer, N., Mayer, J. R. R., & Nouira, H. (2025). Advanced ultra-high precision system (NanoCyl) for accurate cylindricity measurements. CIRP journal of manufacturing science and technology, 59, 118-126.
  - Zeng, M., Feng, M., Mayer, J. R. R., Bitar-Nehme, E., & Duong, X. T. (2025). Machine learning models for predicting volumetric errors based on scale and master balls artefact probing data. CIRP journal of manufacturing science and technology, 59, 135-157.
  - Gonzalez‐Villagomez, J., Esau, G.-V., Mayer, J. R. R., Rodríguez-Donate, C., & Xing, K. (2025). Novel cylindrical representation of the STFT for signal analysis. Electronics Letters, 61(1), 4 pages.
- 2024
  - Pirbalouti, M. J. A., Altintas, Y., & Mayer, J. R. R. (2024). Digital mapping of machine tool's volumetric and tracking errors left on the five axis tool paths. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 88, 815-822.
  - Xing, K., Mayer, J. R. R., Bonev, I. A., Champliaud, H., & Liu, Z. (2024). Evaluation of the Positioning Accuracy Along Helical Paths Using a Telescoping Ballbar. ASME Letters in Dynamic Systems and Control, 4(1).
  - Beglarzadeh, B., & Mayer, J. R. R. (2024). Sensorless loaded test for machine tool 2D compliance characterization using a tool-mounted roller bearing. Journal of Manufacturing Processes, 111, 151-165.
- 2023
  - Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2023). Deep Learning to Directly Predict Compensation Values of Thermally Induced Volumetric Errors. Machines, 11(4), 16 pages.
  - Gao, W., Ibaraki, S., Donmez, M. A., Kono, D., Mayer, J. R. R., Chen, Y.-L., Szipka, K., Archenti, A., Linares, J.-M., & Suzuki, N. (2023). Machine tool calibration: Measurement, modeling, and compensation of machine tool errors. International Journal of Machine Tools and Manufacture, 187, 61 pages.
- 2022
  - Mechta, A., Slamani, M., Zaoui, M., Mayer, J. R. R., & Chatelain, J.-F. (2022). Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools. International Journal of Advanced Manufacturing Technology, 120(7-8), 5093-5115.
  - Ngoc, H. V., Mayer, J. R. R., & Bitar-Nehme, E. (2022). Deep learning LSTM for predicting thermally induced geometric errors using rotary axes powers as input parameters. CIRP Journal of Manufacturing Science and Technology, 37, 70-80.
  - Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2022). Estimation of an elasto-geometric model exploiting a loaded circular test on a machine tool. International Journal of Advanced Manufacturing Technology, 123(7-8), 2331-2349.
- 2021
  - Sepahi-Boroujeni, S., Mayer, J. R. R., Khameneifar, F., & Wozniak, A. (2021). A full-covariance uncertainty assessment in on-machine probing. International Journal of Machine Tools and Manufacture, 167, 12 pages.
  - Esmaeili, S. M., & Mayer, J. R. R. (2021). CNC table based compensation of inter-axis and linear axis scale gain errors for a five-axis machine tool from symbolic variational kinematics. CIRP Annals, 70(1), 439-442.
  - Bernard, G., Achiche, S., Girard, S., & Mayer, J. R. R. (2021). Condition monitoring of manufacturing processes under low sampling rate. Journal of Manufacturing and Materials Processing, 5(1), 26 (14 pages).
  - Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2021). Efficient uncertainty estimation of indirectly measured geometric errors of five-axis machine tools via Monte-Carlo validated GUM framework. Precision Engineering, 67, 160-171.
  - Bonin, R., Khameneifar, F., & Mayer, J. R. R. (2021). Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact. Sensors, 21(6), 2137 (18 pages).
  - Esmaeili, S., Mayer, J. R. R., Sanders, M., Dahlem, P., & Xing, K. (2021). Five-axis machine tool volumetric and geometric error reduction by indirect geometric calibration and lookup tables. Journal of Manufacturing Science and Engineering, 143(7), 28 pages.
  - Beglarzadeh, B., Mayer, J. R. R., & Archenti, A. (2021). Modelling and indirect measurement of machine tool equivalent joint compliances. CIRP Journal of Manufacturing Science and Technology, 35, 882-895.
- 2020
  - Esmaeili, S., & Mayer, J. R. R. (2020). An integrated geometric and hysteretic error model of a three axis machine tool and its identification with a 3D telescoping ball-bar. Journal of Manufacturing and Materials Processing, 4(1), 14 pages.
  - Esmaeili, S. M., & Mayer, J. R. R. (2020). Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test. International Journal of Advanced Manufacturing Technology, 106(11-12), 4649-4662.
  - Xing, K., Mayer, J. R. R., & Achiche, S. (2020). Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. International Journal of Automation Technology, 14(3), 369-379.
  - Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020). Repeatability of on-machine probing by a five-axis machine tool. International Journal of Machine Tools and Manufacture, 152, 19 pages.
- 2019
  - Ghandali, P., Khameneifar, F., & Mayer, J. R. R. (2019). A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners. Optics and Lasers in Engineering, 121, 87-95.
  - Hashemiboroujeni, H., Esmaeili Marzdashti, S., Xing, K., & Mayer, J. R. R. (2019). Five-axis machine tool coordinate metrology evaluation using the ball dome artefact before and after machine calibration. Journal of Manufacturing and Materials Processing, 3(1), 20 (12 pages).
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019). Five-axis machine tool fault monitoring using volumetric errors fractal analysis. CIRP Annals, 168(1), 555-558.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (2019). Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures. International Journal of Machine Tools & Manufacture, 138, 80-93.
  - Mchichi, N. A., & Mayer, J. R. R. (2019). Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach. International Journal of Advanced Manufacturing Technology, 103(1-4), 251-265.
- 2018
  - Los, A., & Mayer, J. R. R. (2018). Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior. Precision Engineering, 53, 17-25.
  - Xing, K., Mayer, J. R. R., & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3).
  - Bitar-Nehme, E., & Mayer, J. R. R. (2018). Modelling and compensation of dominant thermally induced geometric errors using rotary axes power consumption. CIRP Annals, 67(1), 547-550.
  - Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28.
- 2017
  - Mayer, J. R. R., & Hashemiboroujeni, H. (2017). A ball dome artefact for coordinate metrology performance evaluation of a five axis machine tool. CIRP Annals - Manufacturing Technology, 66(1), 479-482.
- 2016
  - Rahman, M. M., & Mayer, J. R. R. (2016). Calibration performance investigation of an uncalibrated indigenous artefact probing for five-axis machine tool. Journal of Machine Engineering, 16(1), 33-42.
  - Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176.
  - Rahman, M. M., & Mayer, J. R. R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), 495-510.
  - Givi, M., & Mayer, J. R. R. (2016). Optimized volumetric error compensation for five-axis machine tools considering relevance and compensability. CIRP Journal of Manufacturing Science and Technology, 12, 44-55.
  - Rahman, M. M., & Mayer, J. R. R. (2016). Performance of a five-axis machine tool as a coordinate measuring machine (CMM). Journal of Advanced Mechanical Design, Systems, and Manufacturing, 10(5), 14 pages.
  - Bitar-Nehme, E., & Mayer, J. R. R. (2016). Thermal volumetric effects under axes cycling using an invar R-test device and reference length. International Journal of Machine Tools and Manufacture, 105, 14-22.
  - Rak, M. B., Wozniak, A., & Mayer, J. R. R. (2016). The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud. Optics and Lasers in Engineering, 81, 140-150.
- 2015
  - Mayer, J. R. R., Rahman, M. M., & Los, A. (2015). An uncalibrated cylindrical indigenous artefact for measuring inter-axis errors of a five-axis machine tool. CIRP Annals - Manufacturing Technology, 64(1), 487-490.
  - Yang, J., Mayer, J. R. R., & Altintas, Y. (2015). A position independent geometric errors identification and correction method for five-axis serial machines based on screw theory. International Journal of Machine Tools and Manufacture, 95, 52-66.
  - Guiassa, R., Mayer, J. R. R., St-Jacques, P., & Engin, S. (2015). Calibration of the cutting process and compensation of the compliance error by using on-machine probing. International Journal of Advanced Manufacturing Technology, 78(5-8), 1-9.
  - Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Determining the minimum clamping force by cutting force simulation in aerospace fuselage pocket machining. International Journal of Advanced Manufacturing Technology, 80(9-12), 1751-1758.
  - Wozniak, A., & Mayer, J. R. R. (2015). Discontinuity check of scanning in coordinate metrology. Measurement: Journal of the International Measurement Confederation, 59, 284-289.
  - Rahman, M. M., & Mayer, J. R. R. (2015). Five axis machine tool volumetric error prediction through an indirect estimation of intra-and inter-axis error parameters by probing facets on a scale enriched uncalibrated indigenous artefact. Precision Engineering, 40, 94-105.
  - Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Magnetic attraction forces between permanent magnet group arrays in a mobile magnetic clamp for pocket machining. CIRP Journal of Manufacturing Science and Technology, 11, 82-88.
  - Mahmud, A., Mayer, J. R. R., & Baron, L. (2015). Modeling of Laterally Sliding Motion of a Magnetic Clamp. Advances in Acoustics and Vibration, 2015, 1-8.
  - Rak, M. B., Mayer, J. R. R., & Wozniak, A. (2015). Proximity weighted correction of high density high uncertainty (HDHU) point cloud using low density low uncertainty (LDLU) reference point coordinates. Optics and Lasers in Engineering, 68, 160-165.
  - Givi, M., & Mayer, J. R. R. (2015). Volumetric error formulation and mismatch test for five-axis CNC machine compensation using differential kinematics and ephemeral G-code. International Journal of Advanced Manufacturing Technology, 77(9-12), 1645-1653.
- 2014
  - Guiassa, R., Mayer, J. R. R., Balazinski, M., Engin, S., & Delorme, F.-E. (2014). Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process. International Journal of Computer Integrated Manufacturing, 27(11), 1022-1030.
  - Woźniak, A., & Mayer, J. R. R. (2014). Metoda korekcji promienia końcówki w pomiarach skaningowych WMP. Mechanik, 87, 424-429.
  - Givi, M., & Mayer, J. R. R. (2014). Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. International Journal of Machine Tools and Manufacture, 87, 89-95.
- 2013
  - Slamani, M., Mayer, J. R. R., & Balazinski, M. (2013). Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 65(9-12), 1669-1679.
- 2012
  - Wozniak, A., & Mayer, J. R. R. (2012). A Robust Method for Probe Tip Radius Correction in Coordinate Metrology. Measurement Science & Technology, 23(2), 8 pages.
  - Mayer, J. R. R. (2012). Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact. CIRP Annals - Manufacturing Technology, 61(1), 515-518.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., Carrier, B., & Engin, S. (2012). Improvement to High-Speed End Mill Boring Accuracy by a Simple Compensation Strategy. Machining Science and Technology, 16(1), 1-19.
  - Nafi, A., Mayer, J. R. R., & Wozniak, A. (2012). Reduced Configuration Set for the Multi-Step Method Applied to Machine and Probe Error Separation on a CMM. Measurement: Journal of the International Measurement Confederation, 45(10), 2321-2329.
- 2011
  - Andolfatto, L., Mayer, J. R. R., & Lavernhe, S. (2011). Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance. International Journal of Machine Tools and Manufacture, 51(7-8), 618-627.
  - Andolfatto, L., Lavernhe, S., & Mayer, J. R. R. (2011). Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. International Journal of Machine Tools and Manufacture, 51(10-11), 787-796.
  - Slamani, M., Mayer, J. R. R., & Cloutier, G. (2011). Modeling and experimental validation of machine tool motion errors using degree optimized polynomial including motion hysteresis. Experimental Techniques, 35(1), 37-44.
  - Nafi, A., Mayer, J. R. R., & Wozniak, A. (2011). Novel CMM-based implementation of the multi-step method for the separation of machine and probe errors. Precision Engineering, 35(2), 318-328.
  - Guiassa, R., & Mayer, J. R. R. (2011). Predictive compliance based model for compensation in multi-pass milling by on-machine probing. CIRP Annals - Manufacturing Technology, 60(1), 391-394.
  - Erkan, T., Mayer, J. R. R., & Wozniak, A. (2011). Surface probing simulator for the evaluation of CMM probe radius correction software. International Journal of Advanced Manufacturing Technology, 55(1-4), 307-315.
  - Erkan, T., Mayer, J. R. R., & Dupont, Y. (2011). Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact. Precision Engineering, 35(1), 116-125.
- 2010
  - Erkan, T., & Mayer, J. R. R. (2010). A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact. CIRP Annals - Manufacturing Technology, 59(1), 539-542.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., Zargarbashi, S. H. H., Engin, S., & Lartigue, C. (2010). Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 50(9-12), 1063-1073.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2010). Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines. Journal of Manufacturing Science and Engineering, 132(3), 034501-034501.
- 2009
  - Onat Ekinci, T., Mayer, J. R. R., & Cloutier, G. (2009). Investigation of accuracy of aerostatic guideways. International Journal of Machine Tools and Manufacture, 49(6), 478-487.
  - Zargarbashi, S. H. H., & Mayer, J. R. R. (2009). Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor. International Journal of Machine Tools and Manufacture, 49(10), 759-766.
  - Wozniak, A., Mayer, J. R. R., & Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology. International Journal of Advanced Manufacturing Technology, 42(5-6), 505-514.
- 2008
  - Chatelain, J.-F., Roy, R., & Mayer, J. R. R. (2008). Development of a spiral trajectory for high speed roughing of light alloy aerospace components. WSEAS Transactions on Applied and Theoretical Mechanics, 3(3), 83-93.
  - Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800.
- 2007
  - Ekinci, T. O., & Mayer, J. R. R. (2007). Relationships Between Straightness and Angular Kinematic Errors in Machines. International Journal of Machine Tools and Manufacture, 47(12-13), 1997-2004.
- 2006
  - Zargarbashi, S. H. H., & Mayer, J. R. R. (2006). Assessment of Machine Tool Trunnion Axis Motion Error, Using Magnetic Double Ball Bar. International Journal of Machine Tools and Manufacture, 46(14), 1823-1834.
- 2005
  - Zargarbashi, S. H. H., & Mayer, J. R. R. (2005). A Model Based Method for Centering Double Ball Bar Test Results Preventing Fictitious Ovalization Effects. International Journal of Machine Tools and Manufacture, 45(10), 1132-1139.
- 2004
  - Paris, H., Peigne, G., & Mayer, J. R. R. (2004). Surface Shape Prediction in High Speed Milling. International Journal of Machine Tools and Manufacture, 44(15), 1567-1576.
- 2003
  - Phan, A. V., Baron, L., Mayer, J. R. R., & Cloutier, G. (2003). Finite Element and Experimental Studies of Diametral Errors in Cantilever Bar Turning. Applied Mathematical Modelling, 27(3), 221-232.
- 2002
  - Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797.
  - Mir, Y. A., Mayer, J. R. R., & Fortin, C. (2002). Tool path error prediction of a five-axis machine tool with geometric errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 697-712.
- 2000
  - Mayer, J. R. R., Phan, A. V., & Cloutier, G. (2000). Prediction of Diameter Errors in Bar Turning: a Computationally Effective Model. Applied Mathematical Modelling, 24(12), 943-956.
- 1999
  - Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (1999). A Finite-Element Model With Closed-Form Solutions to Workpiece Deflections in Turning. International Journal of Production Research, 37(17), 4039-4051.
  - Phan, A. V., Cloutier, G., & Mayer, J. R. R. (1999). Finite element model for predicting tapered workpiece deflections in turning. Computer modeling and simulation in engineering, 4(2), 138-142.
  - Cloutier, G., Mayer, J. R. R., & Phan, A.-V. (1999). Singularity function representation in obtaining closed-form solutions to workpiece deflections in turning multi-diameter bars. Computer modeling and simulation in engineering, 4(2), 133-137.
- 1998
  - Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. (1998). Hypersingular Boundary Contour Method for Two-Dimensional Linear Elasticity. Acta Mechanica, 130(3-4), 209-225.
  - Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. (1998). Stresses, Stress Sensitivities and Shape Optimization in Two- Dimensional Linear Elasticity by the Boundary Contour Method. International Journal for Numerical Methods in Engineering, 42(8), 1391-1407.
- 1997
  - Mayer, J. R. R., Cloutier, G., & Fortin, C. (1997). Quadrilateration and measurement site identification with dual scanning axis laser tracking interferometers. Measurement: Journal of the International Measurement Confederation, 20(3), 171-187.
  - Mayer, J. R. R., Mir, Y. A., Trochu, F., Vafaeesefat, A., & Balazinski, M. (1997). Touch probe radius compensation for coordinate measurement using kriging interpolation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211(B1), 11-18.
- 1996
  - Mayer, J. R. R., Ghazzar, A., & Rossy, O. (1996). 3D characterisation, modelling and compensation of the pre-travel of a kinematic touch trigger probes. Measurement, 19(2), 83-94.
- 1994
  - Mayer, J. R. R. (1994). High-resolution of rotary encoder analog quadrature signals. IEEE Transactions on Instrumentation and Measurement, 43(3), 494-498.
  - Mayer, J. R. R., & Parker, G. A. (1994). Portable instrument for 3-D dynamic robot measurements using triangulation and laser tracking. IEEE Transactions on Robotics and Automation, 10(4), 504-516.
Conference papers (64)
- 2023
  - Latulippe, M., Khameneifar, F., & Mayer, J. R. R. (2023, May). Correction of the systematic errors of 3D scanner measurements by data fusion with CMM data [Paper]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada.
  - Zargar, S. H. H., & Mayer, J. R. R. (2023, May). Methodology for Motion Error Diagnostic of a Machine Tool Trunnion Axis Using DBB [Paper]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec.
  - Duong, X. T., Nguyen‐Tri, P., Mayer, J. R. R., Luong, C. H., & Balazinski, M. (2023, August). Optimization of Initial Cutting Parameters for a Turning Process Based on the Response Surface Methodology [Paper]. Materials for Sustainable Environmental, Energy, and Bioresource Applications (M2EBA 2023), Trois-Rivières, QC, Canada. Published in Springer proceedings in earth and environmental sciences.
  - Zeng, M., Mayer, J. R. R., & Duong, X.T. (2023, May). Prediction of diameter error in one-setup machining test by using machine learning algorithms [Abstract]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Published in Progress in Canadian Mechanical Engineering, 6.
  - Zhuang, T., & Mayer, J. R. R. (2023, October). Prediction of machine tool's static translational volumetric error caused by compliance from feed motor torque [Paper]. 11th CIRP Global Web Conference (CIRPe 2023). Published in Procedia CIRP, 121.
  - Ekinci, T. O., Mayer, J. R. R., & Cloutier, G. (2023, May). Thermal Distortion Modeling on CMM Structures [Paper]. 20th Canadian Congress of Applied Mechanics, Montréal, Québec.
- 2021
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelin, J.-F., & Achiche, S. (2021, March). Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters [Paper]. 14th International Conference & Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2021) (10 pages).
- 2020
  - Xing, K., Liu, X., Liu, Z., Mayer, J. R. R., & Achiche, S. (2020, October). Low-Cost Precision Monitoring System of Machine Tools for SMEs [Paper]. 8th CIRP Global Web Conference on Flexible Mass Customisation (CIRPe 2020). Published in Procedia CIRP, 96.
  - Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020, July). Prompt uncertainty estimation with GUM framework for on-machine tool coordinate metrology [Paper]. 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf of Naples, Italy. Published in Procedia CIRP, 112.
- 2019
  - Xing, K., Mayer, J. R. R., & Achiche, S. (2019, June). Application of EWMA control chart on volumetric errors change recognition [Paper]. Joint CSME-CFDSC International Congress, London, ON.
  - Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J.-F., & Achiche, S. (2019, October). Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures [Paper]. 7th CIRP Global Web Conference (CIRPe 2019), Berlin, Germany. Published in Procedia CIRP, 86.
- 2018
  - Xing, K., Achiche, S., Esmaeili, S., & Mayer, J. R. R. (2018, October). Comparison of direct and indirect methods for five-axis machine tools geometric error measurement [Paper]. 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018). Published in Procedia CIRP, 78.
  - Jankowski, M., Wozniak, A., & Mayer, J. R. R. (2018, December). On-machine and In-laboratory Investigation of Errors of Probes for CNC Machine Tools [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (2018, December). The Effects of Machine Tool Pallet Change on Machine Tool Geometric Measurement Using the Scale and Master Ball Artefact Method (SAMBA) [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam.
- 2017
  - Wozniak, A., & Mayer, J. R. R. (2017, March). Corrected measured point determination in coordinate measurement [Paper]. Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications (ASPEN/ASPE 2017), Hong Kong, Hong kong.
  - Xing, K., Achiche, S., & Mayer, J. R. R. (2017, May). Volumetric error modelling for machine tool condition monitoring using data methods [Paper]. International Conference on Virtual Machining and Process Technology, Montréal, Québec.
- 2016
  - Basta, I., Mayer, J. R. R., & Baron, L. (2016, February). The Octoball: an artefact for additive manufacturing precision assessment [Other]. International Academy for Production Engineering (CIRP) Winter Meeting, STC-P Meeting, Paris, France (41 pages).
- 2015
  - Los, A., & Mayer, J. R. R. (2015, March). Application of GUF for a multi-output iterative measurement model estimation according to GUM S2 in indirect five-axis CNC machine tool calibration [Paper]. 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2015), Queensgate, West Yorkshire, United kingdom.
  - Rahman, M. M., & Mayer, J. R. R. (2015, October). Testing a five axis machine tool for coordinate metrology [Paper]. 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM 2015), Kyoto, Japan.
- 2014
  - Mchichi, N. A., & Mayer, J. R. R. (2014, June). Axis location errors and error motions calibration for a five-axis machine tool using the SAMBA method [Paper]. 6th CIRP International Conference on High Performance Cutting (HPC2014), Berkeley, California. Published in Procedia CIRP, 14.
  - Song, R., Chen, Z., & Mayer, J. R. R. (2014, August). Blank design for the stretch forming of aircraft skin [Paper]. International Conference on Innovative Design and Manufacturing (ICIDM 2014), Montréal, Québec.
  - Xuan-Truong, D., Balazinski, M., & Mayer, J. R. R. (2014, November). Chaotic tool wear during machining of titanium metal matrix composite (TiMMCs) [Paper]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (9 pages).
  - Rak, M., Woniak, A., & Mayer, J. R. R. (2014, April). Review of interpolation methods for point cloud modelling in coordinate metrology [Paper]. 11th International Scientific Conference on Coordinate Measuring Technique (CMT 2014), Bielsko-Biala, Poland.
  - Los, A., & Mayer, J. R. R. (2014, November). Uncertainty estimation of a five-axis machine tool calibration using the adaptive Monte Carlo method [Paper]. 29th Annual Meeting of the American Society for Precision Engineering (ASPE 2014), Boston, MA, United states.
- 2012
  - Guiassa, R., Mayer, J. R. R., & Balazinski, M. (2012, May). Continuous tool path compensation using discrete on machine measurement [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
- 2011
  - Nafi, A., & Mayer, J. R. R. (2011, July). Probing variance separation on coordinate measuring machines [Paper]. World Congress on Engineering (WCE 2011), London, United kingdom.
- 2010
  - Guiassa, R., & Mayer, J. R. R. (2010, May). Compensation of compliance errors in machining using process intermittent probing [Paper]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada.
  - Nafi, A., Mayer, J. R. R., & Wozniak, A. (2010, April). Configurations selection for the separation of machine and probe errors on a CMM by a redundancy method [Paper]. 9th International Scientific Conference Coordinate Measuring Technique, Bielsko-biala-Ustron, Poland.
  - Nafi, A., & Mayer, J. R. R. (2010, May). Identification of scale and squareness errors on a CMM using a step gauge measured based on the ASME 89.4.10360.2-2008 standard [Paper]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada.
  - Erkan, T., & Mayer, J. R. R. (2010, July). Linear axes performance check on a five-Axis machine tool by probing an uncalibrated artefact [Paper]. 36th International MATADOR Conference, Manchester, Lancashire, United kingdom.
  - Erkan, T., & Mayer, J. R. R. (2010, June). Link error estimation for volumetric distortion error prediction of a five-axis machine by probing and uncalibrated artefact [Paper]. 2nd CIRP International Conference on Process Machine Interactions, Vancouver, Canada.
- 2009
  - Erkan, T., Mayer, J. R. R., & Dupont, Y. (2009, October). Compensation for the unknown geometry of a reconfigurable uncalibrated 3D ball artefact for fiveaxis machine volumetric check [Paper]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states.
  - Wozniak, A., & Mayer, J. R. R. (2009, October). Corrected measured point validity check in coordinate metrology [Paper]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2009, May). Modeling and prediction of machines tools errors from circular tests [Paper]. CANCAM 2009, Halifax.
  - Nafi, A., Mayer, J. R. R., & Wozniak, A. (2009, October). Redundancy method for the separation of machine and triggering probe errors in small volume measurement on a CMM [Paper]. 24th Annual Meeting of the American Society for Precision Engineering (ASPE 2009), Monterey, CA, United states.
- 2008
  - Zargarbashi, S. H. H., & Mayer, J. R. R. (2008, May). Simulation of XYC trajectory in five-axis machine tool and the Jacobian-based error estimation [Paper]. 19th IASTED International Conference on Modelling and Simulation, Québec, QC, Canada.
- 2007
  - Wozniak, A., Balazinski, M., & Mayer, J. R. R. (2007, June). Application of fuzzy knowledge base for corrected measured point determination in coordinate metrology [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Zargarbashi, S. H. H., & Mayer, J. R. R. (2007, June). A predictive maintenance method for rotary axes of five-axis machine tools [Paper]. CANCAM 2007, Toronto, Ontario.
  - Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Aspects of the tool wear of carbide tools during high speed machining of aluminum alloys [Paper]. CANCAM 2007, Toronto, Ontario.
  - Slamani, M., Mayer, J. R. R., & Balazinski, M. (2007, June). Improving machine tool accuracy for high-speed orbital milling of holes [Paper]. CANCAM 2007, Toronto, Ontario.
  - Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Method for analyzing the effects of aluminum build-up on tungsten carbide tools behavior [Paper]. CANCAM 2007, Toronto, Ontario.
  - Woźniak, A., & Mayer, J. R. R. (2007, September). Micro-features measurement using meso-volume CMM [Paper]. 7th International Symposium on Mechatronics, Warsaw, Poland.
  - Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2007, August). Pomiary ksztaltu ostrzy narzedzi skrawajacych przy pomocy wspolrzednosciowych maszyn pomiarowych [Paper]. Metrologia w technikach wytwarzania, XII Krajowa III Miedzynarodowa Konferencja Naukowo Techniczna, Poland.
  - Roy, R., Chatelain, J.-F., Mayer, J. R. R., Chalut, S., & Engin, S. (2007, June). Réduction du temps d'usinage par optimisation des trajectoires de coupe, de type spirale [Paper]. 5th International Conference on Industrial Automation, Montréal, Québec.
  - Ekinci, T. O., & Mayer, J. R. R. (2007, June). Relationships between straightness and angular kinematic errors in machines [Paper]. CANCAM 2007, Toronto, Ontario.
- 2006
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2006, June). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada.
  - Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2006, June). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada.
- 2005
  - Zargar, S. H. H., & Mayer, J. R. R. (2005, June). Methodology for the calibration of a machine tool trunnion axis tilt, radial and axial motion errors using telescoping magnetic double ball bar [Paper]. 7th International Conference on Laser Metrology, Machine Tool, CMM, and Robot Performance, University of Cranfield.
- 2003
  - Dupont, Y., Cloutier, G., & Mayer, J. R. R. Identification Method for Scale, Pitch and Yaw Deviations With Linear Measurements [Paper]. Laser Metrology and Machine Performance VI.
  - Abbaszadeh-Mir, Y., Mayer, J. R. R., & Fortin, C. (2003, July). Methodology and Simulation of the Calibration of a Five-Axis Machine Tool Link Geometry and Motion Errors Using Polynomial Modelling and a Telescoping Magnetic Ball-Bar [Paper]. 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2003)), Huddersfield, UK. Published in WIT Transactions on Engineering Sciences, 44.
- 2000
  - Mayer, J. R. R., Mir, Y. A., & Fortin, C. (2000, January). Calibration of a five-axis machine tool for position independent geometric error parameters using a telescoping magnetic ball bar [Paper]. 33rd International MATADOR Conference, Manchester, United Kingdom.
  - Cloutier, G., Mayer, J. R. R., & Aussel, W. (2000, January). Study of the co-calibration of the scale error of a prismatic joint and of a step gauge by shearing of reversal techniques [Paper]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec.
- 1999
  - Phan, A.-V., Cloutier, G., & Mayer, J. R. R. (1999, January). Investigation into diametral error modeling in bar turning [Paper]. NSF Grantees Conference, Los Angeles, USA.
- 1998
  - Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. A boundary contour formulation for design sensitivity analysis in two-dimensional linear elasticity [Paper]. Canadian conference on applied mechanics (CANCAM 1997), Québec, Canada. Published in International Journal of Solids and Structures, 35(16).
  - Mayer, J. R. R., Andrian, R., Cloutier, G., & Fortin, C. (1998, January). Artefact probing for machine tool and process diagnosis [Paper]. 13th Annual Meeting American Society for Precision Engineering, St-Louis, Missouri.
  - Mayer, J. R. R., Andrian, R., Fortin, C., & Cloutier, G. (1998, January). Machine tool capability diagnostic by touch probing [Paper]. CSME Forum, Toronto, Canada.
- 1997
  - Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (1997, July). Interactive computer aided process planning system for manufacturing, assembly and inspection [Paper]. 32nd International MATADOR Conference, Manchester, U.K..
  - Mayer, J. R. R., Andrian, R., Fortin, C., Cloutier, G., & Luong, T. (1997, July). Performance verification and monitoring of nc machine-tools for in-process part measurement by touch probing [Paper]. 32nd International MATADOR Conference, Manchester, UK.
  - Balazinski, M., Czogala, E., Mayer, J. R. R., & Shen, Y. (1997, January). Pre-travel compensation of kinematic touch trigger probes using fuzzy decision support system [Paper]. 7th IFSA World Congress, Prague.
  - Phan, A.-V., Mukherjee, S., & Mayer, J. R. R. The boundary contour method for two-dimensional linear elasticity with quadratic boundary elements [Paper]. 12th International Conference on Boundary Element Technology (BETECH XII), Knoxville, TN. Published in Computational Mechanics, 20(4).
- 1995
  - Mayer, J. R. R., Mir, Y. A., & Balazinski, M. (1995, January). Automatic digitizing of sculptured parts with coordinate measuring machines [Paper]. 6th International Conference on Industrial Metrology in Metromatica, Zaragoza, Spain.
  - Oliviers, M. P., & Mayer, J. R. R. (1995, November). Global kinematic calibration of a stewart-platform [Paper]. ASME Dynamic Systems and Control Division, San Francisco, CAL, USA.
  - Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (1995, January). Modeling of sculptured surfaces from touch probe measurements [Paper]. 2nd International Conference on the Concurrent Engineering, Potomac.
  - Mir, Y. A., Mayer, J. R. R., & Balazinski, M. (1995, January). Rapid programming of coordinate measuring machine for digitizing sculptured surface parts [Paper]. Congrès international de génie industriel de Montréal, Montréal, Québec.
Book chapters (4)
- 2019
  - Mayer, J. R. R. (2019). Machine Tool Calibration. In Gao, W. (ed.), Metrology (pp. 189-214).
  - Mayer, J. R. R. (2019). Machine Tool Calibration. In Gao, W. (ed.), Metrology (pp. 1-25).
  - Mayer, J. R. R. (2019). Reversal. In Chatti, S., Laperrière, L., Reinhart, G., & Tolio, T. (eds.), CIRP Encyclopedia of Production Engineering (pp. 1460-1465).
- 2017
  - Mayer, J. R. R. (2017). Optical encoder displacement sensors. In Measurement, Instrumentation, and Sensors Handbook : Spatial, Mechanical, Thermal, and Radiation Measurement (2nd ed., pp. 30-1).

Directory of Experts

Mayer, J. R. René

Directory of Experts

Mayer, J. R. René

You are here

Publications by type

René Mayer (158)