Directory of Experts

Boukhili, Rachid

Directory of Experts

Boukhili, Rachid

Directory of Experts

Publications by type

Journal article (49) Conference paper (38) Book Book chapter Patent Report (1) Thesis Dataset Teaching resource Image Audio recording Video recording Other

Rachid Boukhili (88)

Journal articles (49)
- 2023
  - Ouadday, R., Abusrea, M., Boukhili, R., & Vadean, A. (2023). Modeling of the effect of ATH fillers on the rheology, curing kinetics, and flexural properties of the epoxy resin forming the hydraulic turbines' stay vanes extension. Mechanics of Advanced Materials and Structures, 15 pages.
- 2022
  - Gamdani, F., Boukhili, R., & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages.
  - Mehrabian, M., & Boukhili, R. (2022). Full-field through-the-thickness strain distribution study of hybrid multi-bolted/bonded single-lap composite joints using digital image correlation. Composites Part a-Applied Science and Manufacturing, 163, 107242 (11 pages).
  - Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A., & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 27 pages.
  - Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573.
- 2021
  - Mehrabian, M., & Boukhili, R. (2021). 3D-DIC strain field measurements in bolted and hybrid bolted-bonded joints of woven carbon-epoxy composites. Composites Part B: Engineering, 218, 12 pages.
- 2020
  - Mehrabian, M., & Boukhili, R. (2020). Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC. Composites Science and Technology, 200, 108453 (8 pages).
- 2019
  - Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages.
- 2018
  - Lebel, L., Boukhili, R., & Turenne, S. (2018). Damage to an A-N720 ceramic matrix composite under simulated gas turbine static component conditions using laser heating. Journal of Composite Materials, 52(30), 4127-4138.
  - Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263.
- 2017
  - Lebel, L., Turenne, S., & Boukhili, R. (2017). An experimental apparatus and procedure for the simulation of thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites. Journal of Engineering for Gas Turbines and Power, 139(9), 11 pages.
  - Marouene, A., Legay, P., & Boukhili, R. (2017). Experimental and numerical investigation on the open-hole compressive strength of AFP composites containing gaps and overlaps. Journal of Composite Materials, 51(26), 3631-3646.
  - Morada, G., Vadean, A., & Boukhili, R. (2017). Failure mechanisms of a sandwich beam with an ATH/epoxy core under static and dynamic three-point bending. Composite Structures, 176, 281-293.
  - Bousfia, M., Aboussaleh, M., Ouhbi, B., & Boukhili, R. (2017). Fatigue life prediction for composite materials under Ergodic Gaussian and Stationary Random (EGSR) loads. Composites: Mechanics, Computations, Applications, 8(3), 181-206.
  - Rafiq, A., Merah, N., Boukhili, R., & Al-Qadhi, M. (2017). Impact resistance of hybrid glass fiber reinforced epoxy/nanoclay composite. Polymer Testing, 57, 1-11.
  - Morada, G., Ouadday, R., Vadean, A., & Boukhili, R. (2017). Low-velocity impact resistance of ATH/epoxy core sandwich composite panels: Experimental and numerical analyses. Composites Part B: Engineering, 114, 418-431.
- 2016
  - Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method. Composite Structures, 139, 243-253.
  - Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates - A numerical and experimental study. Composite Structures, 140, 556-566.
- 2015
  - Gamdani, F., Boukhili, R., & Vadean, A. (2015). Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates. Materials & Design, 88, 702-712.
- 2014
  - Hammoud, R., Boukhili, R., & Yahia, A. (2014). Chemoplastic modelling for concrete at high temperature. Journal of Structural Fire Engineering, 5(2), 135-146.
  - Gordon, S., Boukhili, R., & Merah, N. (2014). Impact behavior and finite element prediction of the compression after impact strength of foam/vinylester-glass composite sandwiches. Journal of Sandwich Structures and Materials, 16(5), 551-574.
  - Hammoud, R., Yahia, A., & Boukhili, R. (2014). Triaxial compressive strength of concrete subjected to high temperatures. Journal of Materials in Civil Engineering, 26(4), 705-712.
- 2013
  - Hammoud, R., Boukhili, R., & Yahia, A. (2013). Unified formulation for a triaxial elastoplastic constitutive law for concrete. Materials, 6(9), 4226-4248.
  - Hammoud, R., Boukhili, R., & Yahia, A. (2013). Unified Formulation for a Triaxial Elastoplastic Constitutive Law for Concrete. Materials, 6(9), 4226-48.
- 2009
  - Zebdi, O., Boukhili, R., & Trochu, F. (2009). An inverse approach based on laminate theory to calculate the mechanical properties of braided composites. Journal of Reinforced Plastics and Composites, 28(23), 2911-2930.
  - Daly, H. B., Harchay, M., Belhadjsalah, H., & Boukhili, R. (2009). Experimental characterization and numerical simulation of the humidity absorption process in glass reinforced composites under dissymmetric exposure conditions. Polymer Composites, 30(12), 1825-1836.
  - Zebdi, O., Boukhili, R., & Trochu, F. (2009). Optimum design of a composite helical spring by multi-criteria optimization. Journal of Reinforced Plastics and Composites, 28(14), 1713-1732.
- 2008
  - Ben Daly, H., Hfaied, N., Zidi, M., Guelorget, B., & Boukhili, R. (2008). Nanoindentation of Dry and Aged Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 29(11), 1218-1226.
- 2007
  - Ben Daly, H., Ben Brahim, H., Hfaied, N., Harchay, M., & Boukhili, R. (2007). Investigation of water absorption in pultruded composites containing fillers and low profile additives. Polymer Composites, 28(3), 355-364.
- 2006
  - Boukhili, R., Taib, A. A., Achiou, S., Gordon, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture. International Journal of Adhesion and Adhesives, 26(4), 226-236.
  - Boukhili, R., Taib, A. A., Achiou, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints. International Journal of Adhesion and Adhesives, 26(4), 237-248.
  - Boukhili, R., Boukehili, H., Ben Daly, H., & Gasmi, A. (2006). Physical and Mechanical Properties of Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 27(1), 71-81.
- 2005
  - Charlebois, K. M., Boukhili, R., Zebdi, O., Trochu, F., & Gasmi, A. (2005). Evaluation of the physical and mechanical properties of braided fabrics and their composites. Journal of Reinforced Plastics and Composites, 24(14), 1539-1554.
- 2003
  - Vangrimde, B., & Boukhili, R. (2003). Descriptive Relationships Between Bearing Response and Macroscopic Damage in Grp Bolted Joints. Composites. Part B, Engineering, 34(7), 593-605.
- 2002
  - Vangrimde, B., & Boukhili, R. (2002). Analysis of the Bearing Response Test for Polymer Matrix Composite Laminates: Bearing Stiffness Measurement and Simulation. Composite Structures, 56(4), 359-374.
  - Vangrimde, B., & Boukhili, R. (2002). Bearing Stiffness of Glass Fibre-Reinforced Polyester: Influence of Coupon Geometry and Laminate Properties. Composite Structures, 58(1), 57-73.
- 2000
  - Boukhili, R., & Atarsia, A. (2000). Effect of pulling speed on the sizes of the liquid, gel and solid zone during thermoset pultrusion. Journal of Reinforced Plastics and Composites, 19(18), 1493-1503.
  - Atarsia, A., & Boukhili, R. (2000). Relationship Between Isothermal and Dynamic Cure of Thermosets Via the Isoconversion Representation. Polymer Engineering and Science, 40(3), 607-620.
- 1999
  - Boukhili, R., & Ouddane, M. (1999). Proposal for a torsion shear fixture for bonded joints. Journal of Materials Science, 34(11), 2719-2727.
- 1998
  - Aboussaleh, M., & Boukhili, R. (1998). Life Prediction for Composite Laminates Submitted to Service Loading Spectra. Polymer Composites, 19(3), 241-245.
  - Ouddane, M., & Boukhili, R. (1998). Moisture Absorption Effect on Adhesive Filled Bonded Joints. Polymer Composites, 19(6), 680-688.
  - Boukhili, R., & Aboussaleh, M. (1998). The contact behavior between laminated composites and rigid impactors. Composite Structures, 43(3), 165-178.
- 1997
  - Elomari, S., Boukhili, R., San Marchi, C., Mortensen, A., & Lloyd, D. J. (1997). Thermal expansion responses of pressure infiltrated SiC/Al metal-matrix composites. Journal of Materials Science, 32(8), 2131-2140.
- 1996
  - Elomari, S., Boukhili, R., & Lloyd, D. J. (1996). Thermal expansion studies of prestrained Al₂O₃/Al metal matrix composite. ACTA Materialia, 44(5), 1873-1882.
- 1995
  - Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (1995). Dynamic mechanical analysis of prestrained Al₂O₃/Al metal-matrix composite. Journal of Materials Science, 30(12), 3037-3044.
- 1994
  - Boukhili, R., Bojji, C., & Gauvin, R. (1994). Fatigue mechanisms under low energy repeated impact of composite laminates. Journal of Reinforced Plastics and Composites, 13(10), 856-870.
  - Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Finite element simulation of impact tests of laminated composite plates. Composite Structures, 28(1), 47-59.
  - Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response analysis of laminated composite plates using the finite element method: a parametric study. Journal of the Institution of engineers, 75, 87-91.
  - Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response of laminated composite plates: prediction and verification. Composite Structures, 28(1), 61-72.
Conference papers (38)
- 2021
  - Dega, C., Boukhili, R., Leger, K., Laviolette, J.-P., & Jadidinia, A. (2021, October). Recycling of carbon fiber reinforced plastics by microwave pyrolysis [Paper]. 8th Annual Composites and Advanced Materials Expo (CAMX 2021), Dallas, TX, USA.
- 2017
  - Gamdani, F., Boukhili, R., & Vadean, A. (2017, August). Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites [Paper]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China.
- 2016
  - Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec.
  - Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec.
  - Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (2016, August). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec.
  - Farid, G., Boukhili, R., & Vadean, A. (2016, July). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Paper]. 2nd International Conference on Mechanics of Composites, Porto, Portugal.
- 2015
  - Lebel, L., Turenne, S., & Boukhili, R. (2015, May). Testing ceramic matrix composites for gas turbine combustion chamber panels [Paper]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec.
  - Lebel, L., Turenne, S., & Boukhili, R. (2015, May). Thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites [Paper]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec.
- 2013
  - Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2013, July). An experimental investigation on buckling behavior of variable angle tow laminates subjected to uniform compression load [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2013, April). Buckling analysis of variable stiffness composites plates under non-uniform compression loads using the differential quadrature method [Paper]. 1st International Symposium on Automated Composites Manufacturing, Montréal, Québec.
  - Ouadday, R., Boukhili, R., & Vadean, A. (2013, October). Investigation of thick multicore sandwich constructions under low velocity impact and static indentation [Paper]. Symposium on Advances in Hydroelectric Turbine Manufacturing and Repair, Montréal, Québec.
- 2012
  - Hammoud, R., Boukhili, R., & Yahia, A. (2012, June). Chemoplastic modeling for concrete at high temperature : proceedings [Paper]. 7th International Conference on Structures in Fire, Zurich, Switzerland.
  - Hammoud, R., Boukhili, R., & Yahia, A. (2012, May). 3D constitutive law of concrete-Unified formulation [Paper]. International Conference on Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS 2012), Aix-en-Provence, France.
- 2011
  - Legay, P., Boukhili, R., Hojjati, M., & Chen, J. (2011, September). Impact and compression behaviour of AFP manufactured carbon/epoxy composites containing gaps and overlaps [Paper]. American Society for Composites 26 th Annual Technical Conference/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
- 2008
  - Gordon, S., & Boukhili, R. (2008, July). Low velocity impact characterization of a foam core composite sandwich with an E_Glass fabric/vinyl ester laminates skins [Paper]. 7th Canada Japan Workshop on Composites, Shonan university in Fujisawa.
- 2005
  - Ben Daly, H., Ben Brahim, H., Hfaeid, N., Harchay, M., & Boukhili, R. (2005, August). Caractérisation expérimentale des profils d'humidité à travers l'épaisseur des composites vieillis [Paper]. 17e Congrès français de mécanique, Troyes, France.
- 2004
  - Boukhili, R., Boukehili, H., Gauvin, R., Ben Daly, H., & Gasmi, A. Effect of Fillers and Low Profile Additives on the Bending of Pultruded Composites [Paper]. High Performance Structures and Materials II.
- 2002
  - Vangrimde, B., & Boukhili, R. (2002, September). Bearing response and macroscopic damage in GRP bolted joints [Paper]. Conference on Fracture of polymers, composites and adhesives (ESIS TC4 2002), Les Diablerets, Switzerland.
- 2001
  - Riopel, S., & Boukhili, R. (2001, January). Crack formation in compression moulding of thick composite materials [Paper]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec.
  - Gordon, S., Boukhili, R., & Trochu, F. (2001, January). Effect of additives on the surface aspects of RTM moulded composites [Paper]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec.
  - Ouddane, M., & Boukhili, R. (2001, January). Effect of filler content on the mechanical properties of epoxy based adhesives [Paper]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec.
- 1999
  - Vangrimde, B., & Boukhili, R. (1999, January). Bolted joint fracture modes in glass-fiber reinforced polyester [Paper]. 12th international conference on composite materials, Paris, France.
  - Atarsia, A., & Boukhili, R. Effect of pulling speed on the sizes of the liquid, gel and solid zone during thermoset pultrusion [Paper]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1999).
  - Vangrimde, B., & Boukhili, R. (1999, January). Measuring bolted joint bearing deformation and stiffness [Paper]. 12th international conference on composite materials, Paris, France.
  - Reymond, S., & Boukhili, R. New approach to determining the boundary between the liquid and gelatinous zones in a pultrusion die [Paper]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1999).
  - Boukhili, R., & Elomari, S. Newly developed metallic composites for automotive applications [Paper]. 32nd ISATA Symposium Abstracts.
- 1998
  - Adimi, R., & Boukhili, R. (1998, January). Influence of resin and temperature on the interlaminar shear fatigue of glass fibre reinforced composite rods [Paper]. International Conference on Durability of FRP Composites for Construction, Sherbrooke, Canada.
  - Atarsia, A., & Boukhili, R. (1998, January). New approach relating isothermal and dynamic cure of thermosets [Paper]. 5th International Conference on Composite Engineering (ICCE 1998), Las Vegas, Nevada.
- 1997
  - Boukhili, R., & Elomari, S. (1997, June). Characterization of metal matrix composites by thermal analysis techniques [Paper]. 30th ISATA. Materials for Energy-Efficient Vehicles; Paint and Powder Coating Applications in the Automotive Industries, Florence, Italy.
  - Ouddane, M., Boukhili, R., & Gauvin, R. (1997, May). Effect of filler content on the lap shear strength of epoxy based adhesives [Paper]. 42nd International SAMPE Symposium and Exhibition, Anaheim, CA, USA.
- 1996
  - Aboussaleh, M., & Boukhili, R. (1996, January). Life prediction for composite laminates subjected to service loading spectra [Paper]. Composites 1996 and Oriented Polymers Symposium, Boucherville, Québec.
  - Atarsia, A., Boukhili, R., & Blaise, E. (1996, January). Relationships between DSC and DMA of undercured composites [Paper]. 3rd International Conference on Composites Engineering, New Orleans, Louisiana.
- 1995
  - Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (1995, May). Dynamic mechanical analysis of prestrained Al₂O₃/Al metal matrix composite [Paper]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec.
  - Atarsia, A., Boukhili, R., & Gauvin, R. (1995, January). Effect of fillers on the shear and flexural properties of unidirectional fiber pultruded composites [Paper]. EURO-FILLERS 1995, Mulhouse, France.
  - Boukhili, R., Champoux, L., & Martin, S. Effect of water absorption on the low energy repeated impact of carbon/epoxy laminates [Paper]. International Conference on Progress in Durability Analysis of Composite Systems (DURACOSYS 1995), Bruxelles, Belgique.
  - Elomari, S., Boukhili, R., Lloyd, D. J., & Masounave, J. (1995, May). Thermal expansion studies of prestrained Al₂O₃/Al metal matrix composite [Paper]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec.
  - Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (1995, August). Thermomechanical studies of prestrained Al₂O₃/Al metal matrix composite [Paper]. 10th International Conference on Composite Materials, Vancouver, BC.
- 1994
  - Boukhili, R., Bojji, C., & Gauvin, R. (1994, April). Impact-fatigue in graphite/epoxy composites laminates [Paper]. 39th International SAMPE, CA.
Reports (1)
- 1992
  - Bojji, C., Boukhili, R., & Gauvin, R. (1992). Endommagement par chocs répétés de composites unidirectionnels. (Technical Report n° EPM-RT-92-24).

Directory of Experts

Boukhili, Rachid

Directory of Experts

Boukhili, Rachid

You are here

Publications by type

Rachid Boukhili (88)