Laboratoire des Revêtements Fonctionnels et d'Ingénierie des Surfaces (LaRFIS)

Vous êtes ici

Publications

Articles de revues
2025-2020

2025

  1. Fellipy S. Rocha, Pedro R.T. Avila, Oumar Touré, Marwan Azzi, Fadila Khelfaoui, Luc Vernhes, Gregory S. Patience, Jolanta E. Klemberg-Sapieha, Ludvik Martinu,Enhanced heavy oil fouling resistance of cobalt-based spray-deposited coatings by alloy design and heat treatment, Surface and Coatings Technology, (2025) 131528.
     
  2. Félix Thouin, David M. Myers, Ashutosh Patri, Bill Baloukas, Ludvik Martinu, Antonio I. Fernández-Domínguez, Stéphane Kéna-Cohen, "Field Enhancement and Nonlocal Effects in Epsilon-Near-Zero Photonic Gap Antennas",  ACS Nano 19(8) (2025)  7996–8004.
     
  3. Protsak, M., Cervenkova, V., Nikitin, D., Ali-Ogly, S., Krtouš, Z., Biliak, K., Pleskunov, P., Tosca, M., Katuta, R., Biederman, H., Baloukas, B., Martinu, L., Bajtosova, L., Cieslar, M., Dopita, M., Choukourov, A., "Gas-Aggregated Core–Shell ZrN@SiN Nanoparticles with Enhanced Thermal Stability for Plasmonic Applications at High Temperatures", ACS Applied Nano Materials (6) (2025) 3092-3103.
     
  4. Fellipy S. Rocha, Pedro R. T. Avila, Fadila Khelfaoui, Luc Vernhes, Gregory S. Patience, Jolanta E. Klemberg-Sapieha, Ludvik Martinu, "Reactively sputtered coatings for the protection of a nickel-based alloy against heavy oil corrosion fouling", J. Vac. Sci. Technol. A  43 (3) (2025) 033106
     
  5. Zdeněk Krtouš, Oleksandr Polonskyi, Pavel Pleskunov, Miroslav Cieslar, Bill Baloukas, Ludvik Martinu, Jaroslav Kousal, "Sensing of Organic Vapors with Plasmonic Distributed Bragg Reflectors", ACS Appl. Mater. Interfaces (2025) DOI:10.1021/acsami.5c02058.
     
  6. Rodrigue Beaini, Fabien Dupont, Antoine Dumont, Etienne Robert, Jolanta Klemberg-Sapieha, Ludvik Martinu, “Surface temperature and emissivity assessment in an enclosed cavity at high temperature using IR thermography”, Infrared Physics and Technology, 147 (2025) 105815.
     
  7. Veronika Simova, Oleg Zabeida, Luis Bernardo Varela, Jincheng Qian, Jolanta-Ewa Klemberg-Sapieha, Ludvik Martinu,"Tuning the mechanical properties and toughness of TiAlN coatings deposited by low duty cycle pulsed magnetron sputtering from a rotating cylindrical target", Surface and Coatings Technology 511 (2025) 132262.

2024

  1. A. W. Lussier, D. Bourbonnais-Sureault, M. Chicoine, R. Martel, L. Martinu, S. Roorda, F. Schiettekatte, "Raman-based mapping and depth-profiling of the relaxation state in amorphous silicon", J. Appl. Phys. 135 (6) (2024) 065301.
     
  2. E. Zamani, N. Ksantini, G. Sheehy, K.J.I. Ember, B. Baloukas, O. Zabeida, T. Trang, M. Mahfoud, J.-E. Sapieha, L. Martinu, F. Leblond, "Spectral effects and enhancement quantification in healthy human saliva with surface-enhanced Raman spectroscopy using silver nanopillar substrates", Lasers Surg Med. 56 (2024) 206–217.
     
  3. Pavel Pleskunov, Mariia Protsak, Zdeněk Krtouš, Tereza Košutová, Marco Tosca, Kateryna Biliak, Veronika Červenková, Daniil Nikitin, Jan Hanuš, Miroslav Cieslar, Ivan Gordeev, Milan Dopita, Michael Vorochta, Jaroslav Kousal, Ludvik Martinu, and Andrei Choukourov, “Refractory Plasmonics of Reactively Sputtered Hafnium Nitride Nanoparticles: Pushing Limits.” Advanced Optical Materials 12(13) (2024) 2302715.
     
  4. E. Lalande, A. Davenport, L. Marchand, A. Markosyan, D. Martinez, A. Paolone, M. Rezac, M. Bazzan, M. Chicoine, J. Colaux, M. Coulon, M. Fejer, A. Lussier, E. Majorana, L. Martinu, C. Menoni, C. Michel, F. Ricci, F. Schiettekatte, N. Shcheblanov, J. Smith, J. Teillon, G. Terwagne, G. Vajente "Ar transport and blister growth kinetics in titania-doped germania-based optical coatings", Classical & Quantum Gravity 41 (2024) 115013.
     
  5. Phillip Rumsby, Bill Baloukas, Oleg Zabeida, and Ludvik Martinu, "Enhanced Durability and Antireflective Performance of Ag-Based Transparent Conductors Achieved via Controlled N-Doping", ACS Applied Materials & Interfaces 16 (2024) 24039–24051.
     
  6. L. B. Varela, P. R. T. Avila, A. Miletić, E. Bousser, J. M. Mendez, J. E. Klemberg-Sapieha, L. Martinu, "Residual stress depth profiles self-developed in cathodic arc deposited Ti-Al-N coatings prepared at different constant substrate bias values". J. Vac. Sci. Technol. A 42 (4) (2024) 043104.
     
  7. Yuxiao Wu, Marwan Azzi, Fadila Khelfaoui, Luc Vernhes, Ludvik Martinu, Jolanta Klemberg-Sapieha, "Static and dynamic friction and wear of cobalt-based coatings at elevated temperatures", Tribology International 200 (2024) 110126.
     
  8. Fellipy S. Rocha, Etienne Bousser, Marwan Azzi, Fadila Khelfaoui, Luc Vernhes, Gregory S. Patience, Jolanta E. Klemberg-Sapieha, Ludvik Martinu,"Alumina coatings on Ni-based superalloys: The impact of annealing on heavy oil fouling", Surface and Coatings Technology 493 (2) (2024) 131266.
     
  9. Y. Wu, M. Azzi, F. Khelfaoui, L. Vernhes, L. Martinu, J. Klemberg-Sapieha,  "Static friction measurement methodology for the assessment of performance of industrial valves at high temperatures: Case study for a nickel-based alloy coating", Tribology International 192 (2023) 109237.

2023 

  1. Artem Shelemin, Zdenek Krtous, Bill Baloukas, Oleg Zabeida, Jolanta Klemberg-Sapieha, and Ludvik Martinu, "Fabrication of Plasmonic Indium Tin Oxide Nanoparticles by Means of a Gas Aggregation Cluster Source", ACS Omega 8 (2023) 6052−6058
     
  2. Francis Blanchard,   Massine J. Kadi, Etienne Bousser,  Bill Baloukas,  Marwan Azzi,  Jolanta-Ewa Klemberg-Sapieha,  and Ludvik Martinu, "Effect of CMAS Infiltration on the Optical Properties of Thermal Barrier Coatings: Study of the Mechanisms Supported by FDTD Simulations and ALD", AMI: Acta Materialia 249 (2023) 118830
  3. F. Blanchard, M.J. Kadi, E. Bousser, B. Baloukas, M. Azzi, J.E. Klemberg-Sapieha, L. Martinu, "Effect of thermal ageing on the optical properties and pore structure of thermal barrier coatings", Surface and Coatings Technology, 452 (2023) 129080.
     
  4. S. Hassani, D. Li, L. Martinu, J. E. Klemberg-Sapieha, "Highly elastic hard PECVD TiSiC:H/a-SiC:H coatings with enhanced erosion and corrosion resistance: The trampoline effect". Journal of Vacuum Science & Technology A,  41 (4)  (2023)  043105.
     
  5. R. Snyders, D. Hegemann, D. Thiry, O. Zabeida, J.-E. Klemberg-Sapieha and L. Martinu, "Foundations of plasma enhanced chemical vapor deposition of functional coatings", Plasma Sources Science and Technology, 23 (2023) 074001.
     
  6. P.R.T. Avila, O. Zabeida, L.B. Varela, J.E. Klemberg-Sapieha, L. Martinu, "In-situ monitoring of stress evolution in High Power Impulse Magnetron Sputtering-deposited Ti-Al-N films: Effect of substrate bias and temperature", Thin Solid Films, 784 (2023) 140069.
     
  7. K. Prasai, K. Lee, B. Baloukas, H-P. Cheng, M. Fazio, L. Martinu, A. Mehta, C. S. Menoni, F. Schiettekatte, R. Shink, B. Shyam, G. Vajente, M. M. Fejer, R. Bassiri; "Effects of elevated-temperature deposition on the atomic structure of amorphous Ta2O5 films", APL Mater., 11 (2023) 121112.

     

2022

  1. S. Brown, F. Bergeron, S. Loquai, M. Cavarroc, S. Knittel, L. Martinu, J. E. Klemberg-Sapieha, "High-temperature oxidation protection of γ-based TiAl by sputtered AlOF films", Surface and Coatings Technology, 439 (2022) 128283.
     
  2. V. Simova, S. Knittel, M. Cavarroc, L. Martinu, J.-E. Klemberg-Sapieha, "Amorphous Si–B–C–N coatings for high-temperature oxidation protection of the γ-TiAl alloy", Surface and Coatings Technology, 442 (2022) 128544.
     
  3. F. Pougoum, A. Jedrzejczak, M. Azzi, L. Martinu, and J. E. Klemberg-Sapieha, "Effect of interface roughness on the tribo-corrosion behavior of diamond like carbon coatings on titanium alloy",  Journal of Vacuum Science & Technology A, 40 (2022) 033405.
     
  4. Josefina Crespo-Villegas, Marjorie Cavarroc, Stephane Knittel, Ludvik Martinu, Jolanta E. Klemberg-Sapieha, "Self-organized multilayer structure in magnetron sputtered SiPt reservoirs on γ-TiAl alloy induced by high-temperature annealing and oxidation", Surface and Coatings Technology, 447 (2022) 128865.
     
  5. Félix Thouin, David M. Myers, Ashutosh Patri, Bill Baloukas, Ludvik Martinu, Stéphane Kéna-Cohen, "Broadband field-enhancement in epsilon-near-zero photonic gap antennas", arXiv:2211.05214v1 (2022).
     
  6. F. Blanchard, M.J. Kadi, E. Bousser, B. Baloukas, M. Azzi, J.E. Klemberg-Sapieha, L. Martinu, "Effect of thermal ageing on the optical properties and pore structure of thermal barrier coatings", Surface and Coatings Technology, 452 (2022) 129080.
     
  7. A.W. Lussier, É. Lalande, M. Chicoine, C. Lévesque, S. Roorda, B. Baloukas, L. Martinu, G. Vajente, A. Ananyeva and F. Schiettekatte, "Hydrogen Concentration and Mechanical Dissipation upon Annealing in Zirconia-doped Tantala Thin Films for Gravitational Wave Observatory Mirrors", J. Phys.: Conf. Ser. 2326 (2022) 012020.

2021

  1. E.J. Herrera-Jimenez, E. Bousser, T. Schmitt, J.E. Klemberg-Sapieha, L. Martinu, "Effect of plasma interface treatment on the microstructure, residual stress profile, and mechanical properties of PVD TiN coatings on Ti-6Al-4V substrates", Surface and Coatings Technology 413 (2021) 127058.
     
  2. Émile Lalande, Alexandre W. Lussier, Carl Lévesque, Marianne Ward, Bill Baloukas, Ludvik Martinu, Gabriele Vajente, Garilynn Billingsley, Alena Ananyeva, Riccardo Bassiri, Martin M. Fejer, and François Schiettekatte , "Zirconia-titania-doped tantala optical coatings for low mechanical loss Bragg mirrors", Journal of Vacuum Science & Technology A 39, (2021) 043416.
     
  3. M. Abernathy, A. Amato, A. Ananyeva, S. Angelova, B. Baloukas, R. Bassiri, G. Billingsley, R Birney, G. Cagnoli, M. Canepa, M. Coulon, J. Degallaix, A. Di Michele, M. A. Fazio, M. M. Fejer, D. Forest, C. Gier, M. Granata, A. M. Gretarsson, E. M. Gretarsson, E. Gustafson, E. J. Hough, M. Irving, É. Lalande, C. Lévesque, A. W. Lussier, A. Markosyan, I. W. Martin, L. Martinu, B. Maynard, C. S. Menoni, C. Michel, P. G. Murray, C. Osthelder, S. Penn, L. Pinard, K. Prasai, S. Reid, R. Robie, S. Rowan, B. Sassolas, F. Schiettekatte, R. Shink, S. Tait, J. Teillon, G. Vajente, M. Ward, L. Yang, "Exploration of co-sputtered Ta2O5-ZrO2 thin films for gravitational-wave detectors", arXiv preprint (2021) arXiv:2103.14140.
     
  4. F. Praud, T. Schmitt, O. Zabeida, S. Maiza, L. Martinu, M. Levesque, "Phase field fracture models to predict crack initiation and propagation in anti-reflective coatings", Thin Solid Films, 736 (2021) 138920.
     
  5. E.J. Herrera-Jimenez, N. Vanderesse, T. Schmitt, E. Bousser, P. Bocher, L. Martinu, J.E. Klemberg-Sapieha, “Fracture mechanism of PVD Ti-based coatings with plasma interfaces on Ti-6Al-4V’’. Surf. Coat. Technol., 46 (2021) 127747.
     
  6. Artem Shelemin, Oleg Zabeida, Jolanta-Ewa Klemberg-Sapieha, and Ludvik Martinu, "Ion beam assisted chemical vapor deposition of hybrid coatings - Process diagnostics and mechanisms", Journal of Vacuum Science & Technology A 39(6) (2021) 063003
     
  7. C. Paquet, S. Brown, J.E. Klemberg-Sapieha, J.-F. Morin,V. Landry, "Self-Healing UV-Curable Acrylate Coatings for Wood Finishing System, Part 2: Impact of Monomer Structure and Self-Healing Parameters on Self-Healing Efficiency", Coatings, 11(11) ( 2021) 1328.
     
  8. Josefina Crespo-Villegas, Marjorie Cavarroc, Stephane Knittel, Ludvik Martinu, Jolanta E. Klemberg-Sapieha, "Protective TixSiy coatings for enhanced oxidation resistance of the ɣ-TiAl alloy at 900 °C", Surface and Coatings Technology, 430 (2021) 127963.

2020

  1. A. Subacius, B. Baloukas, E. Bousser, S.J. Hinder, M.A. Baker, C. Rebholz, A. Matthews, "Nanostructural characterisation and optical properties of sputter-deposited thick indium tin oxide (ITO) coatings", Coatings 10 (2020) 1127.

  2. R. Beaini, B. Baloukas, S. Loquai, J.E. Klemberg-Sapieha, L. Martinu, "Thermochromic VO2-based smart radiator devices with ultralow refractive index cavities for increased performance", Solar Energy Materials and Solar Cells, 205 (2020) 110260.

  3. Y. Wu, Th. Schmitt, E. Bousser, L. Vernhes, F. Khelfaoui, G. Perez, J.-E. Klemberg-Sapieha, M. Brochu, "Microstructural and mechanical characterization of Stellite-hardfaced coatings with two types of buffer layers", Surface and Coatings Technology, 390 (2020) 125611.
     
  4. A. Gholinia, M. Curd, E. Bousser, K. Taylor, T. Hosman, S. Coyle, M. Hassel Shearer, J. Hunt, P. J. Withers, "Coupled Broad Ion Beam-Scanning Electron Microscopy (BIB-SEM) for polishing and three dimensional (3D) Serial Section Tomography (SST)", Ultramicroscopy, 214 (2020) 112989.
     
  5. J. Lengaigne, E. Bousser, S. Brown, P. Xing, F. Turcot, A. Dolatabadi, L. Martinu, J. E. Klemberg-Sapieha, "In situ ice growth kinetics on water-repellent coatings under atmospheric icing conditions", Surface and Coatings Technology, 399 (2020) 126136.
     
  6. S. Brown, J. Lengaigne, N. Sharifi, M. Pugh, Ch.Moreau, A. Dolatabadi, L. Martinu, J. E. Klemberg-Sapieha, "Durability of superhydrophobic duplex coating systems for aerospace applications", Surface and Coatings Technology, 401 (2020) 126249.
     
  7. C. Paquet, T. Schmitt, J.E. Klemberg-Sapieha, J.-F. Morin, V. Landry, " Self-Healing UV Curable Acrylate Coatings for Wood Finishing System, Part 1: Impact of the Formulation on Self-Healing Efficiency", Coatings, 10(8) (2020) 770.
     
  8. Y. Wu, T. Schmitt, E. Bousser, F. Khelfaoui, V. Najarian, J. Klemberg-Sapieha, and M. Brochu, "Effects of interfacial microstructure on mechanical properties of Stellite-hardfaced coating during long-term aging," Surface and Coatings Technology, 398, (2020) 125989.
     
  9. H. Zhou, L. Chang, K. Fu, H. Huang, R. Niu, X. Liao, L. Sheppard, L. Georg, L. Martinu, "Improvement of flow strength and scratch resistance of Ti/Cu nanocrystalline metal multilayer thin films by tailoring layer thickness and modulation ratio", Surface and Coatings Technology, 404 (2020) 126461.
2019-2015

2019

  1. P.S.M. Rajesh, Claire Delaroa, Martin Gagné, Jolanta E. Klemberg-Sapieha, Fréderic Sirois, Daniel Therriault, "Continuous and selective-area coating of silver on fiber-reinforced polymer composites for aerospace applications", Materials Today Communications, 18 (2019) 206-212.
     
  2. Fabrice Pougoum, Jincheng Qian, Ludvik Martinu, Jolanta Klemberg-Sapieha, Zhifeng Zhou, Kwok Yan Li, Sylvio Savoie, Robert Lacasse, Estelle Potvin, Robert Schulz, "Study of corrosion and tribocorrosion of Fe3Al-based duplex PVD/HVOF coatings against alumina in NaCl solution", Surface and Coatings Technology,  357 (2019) 774-783.
     
  3. E. Di Mauro, M. Camaggi, N. Vandooren, C. Bayard, J. De Angelis, A. Pezzella, B. Baloukas, R. Silverwood, A. Ajji, C. Pellerin and C. Santato, "Eumelanin for Nature‐Inspired UV‐Absorption Enhancement of Plastics", Polym. Int., 68(5) (2019) 984-991.
     
  4. S. Hafezian, R. Beaini, L. Martinu, S. Kéna-Cohen, "Degradation mechanism of protected ultrathin silver films and the effect of the seed layer", Applied Surface Science, 48 (2019) 335-340.
     
  5. J. Qian, T. Schmitt, B. Baloukas, C. A. Kosik-Williams, J. J. Price, E. L. Null, C. A. Paulson, J. E. Klemberg-Sapieha, L. Martinu, "In situ tribometry with real-time imaging for assessing durability and wear mechanisms of easy-to-clean coatings on glass for touchscreen substrates", Displays, 57 (2019) 47-54.
     
  6. Gabriel Vinicius De Oliveira Silva, Arunprabaharan Subramanian, Xiang Meng, Shiming Zhang, Martin S Barbosa, Bill Baloukas, Daniel Chartrand, Juan C Gonzáles, Marcelo Ornaghi Orlandi, Francesca Soavi, Fabio Cicoira, Clara Santato, "Tungsten oxide ion-gated phototransistors using ionic liquid and aqueous gating media", Journal of Physics D: Applied Physics, 52(30) (2019) 305102.
     
  7. Sima A Alidokht, Jacques Lengaigne, Jolanta E Klemberg-Sapieha, Steve Yue, Richard R Chromik, "Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior", Journal of Materials Engineering and Performance, 28(3) (2019) 1532-1543.
     
  8. Maria Luisa Grilli, Richard Vernhes, Guohang Hu, Ilaria Di Sarcina, Theodoros Dikonimos, Anna Sytchkova, Ludvik Martinu, Hongbo He, Angela Piegari, "Characteristics of Ultrathin Ni Films", Physica Status Solidi (A), 216(7) (2019) 1800728.
     
  9. Yuxiao Wu, Etienne Bousser, Thomas Schmitt, Nabil Tarfa, Fadila Khelfaoui, Réjean René, Jolanta-Ewa Klemberg-Sapieha, Myriam Brochu,"Thermal stability of a Stellite/steel hardfacing interface during long-term aging", Materials Characterization, 154 (2019) 181-192.
     
  10. Jacques Lengaigne, Etienne Bousser, Stephen Brown, Damian Batory, Ali Dolatabadi, Ludvik Martinu, Jolanta E. Klemberg-Sapieha, "Impact dynamics of supercooled microdroplets on water-repellent coatings", Thin Solid Films 688 (2019) 137309.
     
  11. E.J. Herrera-Jimenez, A. Raveh, T. Schmitt, E. Bousser, J.E. Klemberg-Sapieha, L. Martinu, "Solid solution hardening in nanolaminate ZrN-TiN coatings with enhanced wear resistance", Thin Solid Films 688 (2019) 137431.
     
  12. A. Kilicaslan, O. Zabeida, E. Bousser, T. Schmitt, J.E. Klemberg-Sapieha, L. Martinu, "Hard titanium nitride coating deposition inside narrow tubes using pulsed DC PECVD processes", Surface and Coatings Technology  (2019) 124894.
     
  13. S. Woodward-Gagné, N. Desjardins-Lecavalier, B. Baloukas, O. Zabeida, and L. Martinu, "Tailoring angular selectivity in SiO2 slanted columnar thin films using atomic layer deposition of titanium nitride," Opt. Mater. Express  9, 4556-4563 (2019).
     
  14. S. I. Imbriglio, V. N. V. Munagala, T. Schmitt, R. Gauvin, J. E. Klemberg-Sapieha and R. R. Chromik, "Failure dynamics of spherical and irregular shaped Ti splats deposited on sapphire by cold spray", Surf. Topogr.: Metrol. Prop. 7 (2019) 045002.

2018

  1. Gabriele Vajente, Ross Birney, Alena Ananyeva, Svetoslava Angelova, Romane Asselin, Bill Baloukas, Riccardo Bassiri, Garilynn Billingsley, Martin M Fejer, Des Gibson, Louis J Godbout, Eric K Gustafson, Alastair Heptonstall, Jim Hough, Sean MacFoy, Ashot Markosyan, Iain W Martin, Ludvik Martinu, Peter Gordon Murray, Steven D Penn, Sjoerd Roorda, Sheila Rowan, Francois Schiettekatte, Rosalie Shink, Calum Torrie, David Vine, Stuart Reid and Rana X Adhikari, "Effect of elevated substrate temperature deposition on the mechanical losses in tantala thin film coatings",  Classical and Quantum Gravity, 35 (2018)  075001.
     
  2. Grégory Abadias, Eric Chason, Jozef Keckes, Marco Sebastiani, Gregory B. Thompson, Etienne Barthel, Gary L. Doll, Conal E. Murray, Chris H. Stoessel, Ludvik Martinu, "Review Article: Stress in thin films and coatings: Current status, challenges, and prospects", J.Vac.Sci.Technol.A, 36(2) (2018) 020801.
     
  3. B. Baloukas, S. Loquai, L. Martinu, "VO2-based thermally active low emissivity coatings", Solar Energy Materials and Solar Cells, 183(15) (2018) 25–33.
     
  4. F. Blanchard, B. Baloukas, L. Martinu, "Highly durable electrochromic tungsten oxide thin films prepared by high rate bias-enhanced sputter deposition", Applied Materials Today, 12 (2018) 235–243.
     
  5. S. Habibzadeh, O. Zabeida, A. Argoitia, R. Sargent, J. E. Klemberg-Sapieha, J. Chaouki, and L. Martinu, "Conformal Multilayer Photocatalytic Thin Films on Fine Particles by Atmospheric Pressure Fluidized Bed Chemical Vapor Deposition", Ind. Eng. Chem. Res., 57 (31) (2018) 10345–10353.
     
  6. F. Pougoum, J. Qian, M. Laberge, L. Martinu, J. Klemberg-Sapieha, Zh. Zhou, K. Y.Li, S. Savoie, R. Schulz, "Investigation of Fe3Al-based PVD/HVOF duplex coatings to protect stainless steel from sliding wear against alumina", Surface & Coatings Technology, 350 (2018) 699–711.
     
  7. F. Barachati, A. Fieramosca, S.Hafezian, J. Gu, B. Chakraborty, D. Ballarini, L. Martinu, V. Menon, D. Sanvitto,  S. Kéna-Cohen, "Interacting polariton fluids in a monolayer of tungsten disulfide", Nature Nanotechnology (2018), https://doi.org/10.1038/s41565-018-0219-7.
     
  8. M. Laberge, E. Bousser, J. Schmitt, M. Koshigan, T. Schmitt, F. Khelfaoui, S. Isbitsky, L. Vernhes, J. E. Klemberg-Sapieha,  "Predicting the Load-Carrying Capacity and Wear Resistance of Duplex-Coated Low-Strength Alloys for Severe Service Ball Valves", J. Therm. Spray Tech. 27 (2018) 1177-1186.
     
  9. Hanqing Che, Martin Gagné, P. S. M. Rajesh, Jolanta E. Klemberg-Sapieha, Frederic Sirois, Daniel Therriault, Stephen Yue, "Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection", J. of Materi Eng. and Perform. 27 (2018) 5205-5211.
     
  10. X. Cauchy, J. Klemberg‐Sapieha, and D. Therriault, "Hybrid Carbon–Silver Nanofillers for Composite Coatings with Near Metallic Electrical Conductivity", Adv. Eng. Mater. 20 (2018) 1800541.

2017

  1. S. Loquai, B. Baloukas, J.E. Klemberg-Sapieha, L. Martinu, "HiPIMS-deposited thermochromic VO2 films with high environmental stability", Solar Energy Materials and Solar Cells,  160 (2017) 217-224.
     
  2. X. Rimpault, J.-F. Chatelain, J.E. Klemberg-Sapieha, M. Balazinski, "Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals", CIRP Journal of Manufacturing Science and Technology, 16 (2017) 72-80.
     
  3. T. Poirié, T. Schmitt, E. Bousser, L. Martinu, J. E. Klemberg-Sapieha, "Influence of internal stress in optical thin films on their failure modes assessed by in situ real-time scratch analysis", Tribology International, 109 (2017) 355-366.
     
  4. D. Batory, W. Szymanski, M. Panjan, O. Zabieda, J.E. Klemberg-Sapieha, "Plasma nitriding of Ti6Al4V alloy for improved water erosion resistance", Wear, 374-375 (2017) 120-127.
     
  5. T. Poirié, T. Schmitt, E. Bousser, R. Vernhes, L. Martinu, J. E. Klemberg-Sapieha, "Hybrid organic/inorganic nanolaminate structures with enhanced tribo-mechanical properties for optical applications",  Surface and Coatings Technology, 315 (2017) 399-407.
     
  6. M. Caron, O.Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Stability and performance of organic-inorganic thin films on polymer substrates", Surface and Coatings Technology, 314 (2017) 131-138.
     
  7. X. Rimpault, J.-F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Burr height monitoring while drilling CFRP/titanium/aluminium stacks", Mechanics & Industry, 18(1) (2017) 114.
     
  8. B. Baloukas, M. A. Arvizu, R.-T. Wen, G. A. Niklasson, C. G. Granqvist, R. Vernhes, J. E. Klemberg-Sapieha, and L. Martinu, "Galvanostatic Rejuvenation of Electrochromic WO3 Thin Films: Ion Trapping and Detrapping Observed by Optical Measurements and by Time-of-Flight Secondary Ion Mass Spectrometry", ACS Applied Materials & Interfaces, 9(20) (2017) 16995–17001.
     
  9. F. Pougoum, T. Schmitt, L. Martinu, J. E. Klemberg-Sapieha, S. Savoie, R. Schulz, "Wear behavior of Fe 3 Al-TiN-TiB 2 HVOF coatings: A comparative study between in situ and ex situ powder processing routes", Ceramics International, 43(11) (2017) 8040-8050.
     
  10. S. Lavigne, F. Pougoum, S. Savoie, L. Martinu, J. E. Klemberg-Sapieha, R. Schulz, "Cavitation Erosion Behavior of HVOF CaviTec Coatings", Wear, 386–387 (2017) 90–98.
     
  11. J. Kohout, J. Qian, Th. Schmitt, R. Vernhes, O. Zabeida, J. Klemberg-Sapieha, and L. Martinu, "Hard AlN films prepared by low duty cycle magnetron sputtering and by other deposition techniques", J. Vac. Sci. Technol. A, 35(2017) 061505.
     
  12. X. Cauchy, J.-E. Klemberg-Sapieha, and Daniel Therriault, "Synthesis of Highly Conductive, Uniformly Silver-Coated Carbon Nanofibers by Electroless Deposition", ACS Appl. Mater. Interfaces, 9 (34) (2017) 29010–29020.
     
  13. M. Benkahoul, M.K. Zayed, C.S. Sandu, L. Martinu, J.E. Klemberg-Sapieha, "Structural, tribo-mechanical, and thermal properties of NbAlN coatings with various Al contents deposited by DC reactive magnetron sputtering", Surface and Coatings Technology 331 (2017) 172-178.

2016

  1. T. Poirié, T. Schmitt, E. Bousser, L. Martinu, J. E. Klemberg-Sapieha, "In situ real time nanowear testing method of optical functional thin films", Tribology International, 95 (2016) 147-155 .
     
  2. J. Kohout, E. Bousser, T. Schmitt, R. Vernhes, O. Zabeida, J. Klemberg-Sapieha and L. Martinu, "Stable reactive deposition of amorphous Al2O3 films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle", Vacuum, 124 (2016) 96-100.
     
  3. L. Vernhes, M. Azzi, E. Bousser, T. Schmitt, J. M. Lamarre, J. E. Klemberg-Sapieha, "Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC Coating Systems", J. Thermal Spray Techn., 25(1) (2016) 346-356.
     
  4. D. Goldbaum, P. Manimuda, G. Kamath, S. Descartes, J. E. Klemberg-Sapieha, R. Chromik, “Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates”, Surface and Coatings Technology, 291 (2016) 264–275. 
     

  5. R.D. Farahani, M. Gagné, J.E. Klemberg-Sapieha, D. Therriault, "Electrically conductive silver nanoparticles-filled nanocomposite materials as surface coatings of composite structures", Advanced Engineering Materials, 18(7) (2016) 1189-1199.
     
  6. F. Pougoum, L. Martinu, P. Desjardins, J. Klemberg-Sapieha, S. Gaudet, S. Savoie, R. Schulz, "Effect of high-energy ball-milling on the characteristics of Fe3Al-based HVOF coatings containing boride and nitride phases", Wear, 358-359 (2016) 97-108.
     
  7. S. Loquai, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "HiPIMS-deposited thermochromic VO2 films on polymeric substrates", Solar Energy Materials & Solar Cells, 155 (2016) 60-69.
     
  8. X. Rimpault, J.-F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski, "Surface Profile Topography of Trimmed and Drilled Carbon/Epoxy Composite", Procedia CIRP, 45 (2016) 27-30.
     
  9. G. Taillon, F. Pougoum, S. Lavigne, La. Ton-That,  R. Schulz, E. Bousser, S. Savoie, L. Martinu, J. Klemberg-Sapieha, "Cavitation erosion mechanisms in stainless steels and in composite metal-ceramic HVOF coatings", Wear, 364-365 (2016) 201-210.
     
  10. S. Loquai, O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu, "Flash post-discharge emission in a reactive HiPIMS process", Appl. Phys. Lett, 109 (2016) 114101.
     
  11. F. Pougoum, L. Martinu, J.E. Klemberg-Sapieha, S. Savoie, R. Schulz, "Wear properties of Fe3Al-based HVOF coatings strengthened with in-situ precipitated nitride and boride particles",  Surface and Coatings Technology, 307 (2016) 109-117.
     
  12. W. Trottier-Lapointe, O. Zabeida, T. Schmitt, L. Martinu, "Ultra-Low Refractive Index Optical Films with Enhanced Mechanical Performance Obtained by Hybrid Glancing Angle Deposition", Applied Optics, 55(31) (2016) 8796-8805.
     
  13. S. Hafezian, K. Maloney, J. Lefebvre, L. Martinu, S. Kéna-Cohen, "Continuous ultrathin silver films deposited on SiO2 and SiNx using a self-assembled monolayer", Applied Physics Letters, 109 (2016) 121603.
     
  14. L. Wang, D. Moghe, S. Hafezian, P. Chen, M. Young, M. Elinski, L. Martinu, S. Kéna-Cohen, R. R. Lunt, "Alkali Metal Halide Salts as Interface Additives to Fabricate Hysteresis-Free Hybrid Perovskite-Based Photovoltaic Devices", ACS Applied Materials & Interfaces 8(35) (2016) 23086-23094.
     
  15. X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction" Measurement, 91 (2016) 84-92.
     
  16. L. Vernhes, C. Bekins, N. Lourdel, D. Poirier, R. S. Lima, D. Li, J. E. Klemberg-Sapieha, "Nanostructured and Conventional Cr2O3, TiO2, and TiO2-Cr2O3 Thermal-Sprayed Coatings for Metal-Seated Ball Valve Applications in Hydrometallurgy", J. Therm. Spray. Tech. 25 (2016) 1068.
     
  17. X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining" Procedia CIRP, 46  (2016) 143-146.

2015

  1. S. Ligot, E. Bousser, D. Cossement, J. Klemberg-Sapieha, P. Viville, Ph. Dubois, R. Snyders,"Correlation Between Mechanical Properties and Cross Linking Degree of Ethyl Lactate Plasma Polymer Films", Plasma Processes ans Polymers, 12(6) (2015) 508-518.
     
  2. J.C. Qian, Z.F. Zhou, C. Yan, D.J. Li, K.Y. Li, S. Descartes, R. Chromik, W.J. Zhang, I. Bello, L. Martinu, J.E. Klemberg-Sapieha,  "Tailoring the mechanical and tribological properties of sputtered boron carbide films via the B1 − xCx composition", Surface and Coatings Technology, 267 (2015) 2-7.
     
  3. J.C. Qian, Z.F. Zhou, W.J. Zhang, K.Y. Li, I. Bello, L. Martinu, J.E. Klemberg-Sapieha, "Microstructure and tribo-mechanical properties of Ti–B–C nanocomposite films prepared by magnetron sputtering", Surface and Coatings Technology, 270 (2015) 290-298.
     
  4. H. Camirand, B. Baloukas, J. E. Klemberg-Sapieha, L. Martinu, “In situ spectroscopic ellipsometry of electrochromic amorphous tungsten oxide films”, Solar Energy Materials & Solar Cells, 140 (2015) 77-85.
     
  5. M. Panjan, S. Loquai, J. Klemberg-Sapieha, L.Martinu, "Non-uniform plasma distribution in dc magnetron sputtering: Origin, shape and structuring of spokes" , Plasma Sources Sci. Technol., 24 (2015) 065010.
     
  6. R. Vernhes and L. Martinu, "TRACK – A new method for the evaluation of low-level extinction coefficient in optical films", Optics Express, 23(22) (2015) 28501; Spotlight on Optics 2015 Dec.
     
  7. R.D. Farahania, J.E. Klemberg-Sapieha, D. Therriault, "Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing", Materials & Design, 88 (2015) 1175-1182.
     
  8. F. Venne, M. Quintanilla, F. Quenneville, D. Isik, B. Baloukas, F. Vetrone, C. Santato, “Toward Near-Infrared Photosensitization of Tungsten Trioxide Nanostructured Films by Upconverting Nanoparticles”, RSC Adv., 5 (2015) 81875-81880.

  9. M. A. Arvizu, R.-T. Wen, D. Primetzhofer, J.E. Klemberg-Sapieha, L. Martinu, G. A. Niklasson, and C. G. Granqvist, "Galvanostatic Ion Detrapping Rejuvenates Oxide Thin Films", ACS Appl. Mater. Interfaces, 7 (48) (2015)  26387-26390.
2014-2010

2014

  1. M.-M. de Denus-Baillargeon, T. Schmitt, S. Larouche, and L. Martinu, "Design and fabrication of stress-compensated optical coatings: Fabry–Perot filters for astronomical applications", Applied Optics, 53(12) (2014) 2616-2624.
     
  2. J.-P. Fortier, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Thermochromic VO2 thin films deposited by HiPIMS", Solar Energy Materials & Solar Cells, 125 (2014) 291-296.
     
  3. M. Hála, R. Vernhes, O. Zabeida, E. Bousser, J.E. Klemberg-Sapieha, R. Sargent, L. Martinu, "Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods", Surface and Coatings Technology, 241 (2014) 33 - 37.
     
  4. D. Li, S. Guruvenket, J. A. Szpunar, J. E. Klemberg-Sapieha, "Effect of C/Si Ratio on the Electrochemical Behavior of a-SiCx:H Coatings on SS301 Substrate Deposited by PECVD", International Journal of Corrosion, 2014 (2014) 565109.
     
  5. M. Tousignant, O. Zabeida, G. Rudkowska, A. Yelon, "Investigation of surface effect on giant magnetoimpedance in microwires", Journal of Magnetism and Magnetic Materials, 349 (2014) 232–234.
     
  6. Baloukas, W. Trottier-Lapointe, L. Martinu, "Fabry-Perot-like interference security image structures: From passive to active", Thin Solid Films, 559 (2014) 9-13.
     
  7. S. Hafezian, B. Baloukas, L. Martinu,"Percolation threshold determination of sputtered silver films using Stokes parameters and in situ conductance measurements", Appl. Opt., 53(24) (2014) 5367-5374.
     
  8. E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "Solid particle erosion mechanisms of protective coatings for aerospace applications", Surface and Coatings Technology, 257 (2014) 165-181.
     
  9. V. Marushka, O. Zabeida, L. Martinu, "Distribution of ion current density on a rotating spherical cap substrate", J.Vac.Sci.Technol. A 32(6) (2014) 061513.
     
  10. J. C. Qian, S. K. Jha, B. Q. Wang, E. V. Jelenkovic, I. Bello, J. E. Klemberg-Sapieha, L. Martinu, and W. J. Zhang, "High quality boron carbon nitride/ZnO-nanorods p-n heterojunctions based on magnetron sputtered boron carbon nitride films", Appl. Phys. Lett. 105 (2014) 192104.
     
  11. M. Hála, R. Vernhes, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, "Reactive HiPIMS deposition of SiO2/Ta2O5 optical interference filters", J. Appl. Phys. 116  (2014) 213302.

2013

  1. L. Vernhes, D.A. Lee, D. Poirier, D. Li, J.E. Klemberg-Sapieha, "HVOF Coating Case Study for Power Plant Process Control Ball Valve Application", Journal of Thermal Spray Technology, 22 (2013) 1184-1192.
  2. E. Bousser, L. Martinu and J.E. Klemberg-Sapieha, "Solid particle erosion mechanisms of hard protective coatings", Surface and Coatings Technology,  235 (2013) 383-393.

  3. J. Capek, M. Hala, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, "Deposition rate enhancement in HiPIMS without compromising the ionized fraction of the deposition flux", J. Phys. D: Appl. Phys. 46 (2013) 205205.
     
  4. R. Vernhes, J.E. Klemberg-Sapieha,L. Martinu, "Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications", Sensors and Actuators B: Chemical, 185 (2013) 504–511.
     
  5. L. Vernhes, M. Azzi, J.E. Klemberg-Sapieha, "Alternatives for hard chromium plating: Nanostructured coatings for severe-service valves", Materials Chemistry and Physics, 140(2–3)  (2013) 522-528.
     
  6. E. Bousser, L. Martinu and J. E. Klemberg-Sapieha, "Effect of erodent properties on the solid particle erosion mechanisms of brittle materials", J. Mat. Sci.  48(16) (2013) 5543-5558.
     
  7. C. Harkati Kerboua, J.-M. Lamarre, M. Chicoine, L. Martinu, S. Roorda, "Elongation of gold nanoparticles by swift heavy ion irradiation: Surface plasmon resonance shift dependence on the electronic stopping power", Thin Solid Films 527 ( 2013) 186-192.
     
  8. C. Yan, J.C. Qian, T.W. Ng, Z.F. Zhou, K.Y. Li, W.J. Zhang, I. Bello, L. Martinu, J.E. Klemberg-Sapieha, "Sputter deposition of hard quaternary Al–Mg–B–Ti nanocomposite films", Surface and Coatings Technology, 232 (2013) 535-540.
     
  9. A. Ragusich, G. Taillon, M. Meunier, L. Martinu, J.E. Klemberg-Sapieha, "Selective pulsed laser stripping of TiAlN erosion-resistant coatings: Effect of wavelength and pulse duration", Surface and Coatings Technology, 232 (2013) 758-766.
     
  10. E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "In situ real-time solid particle erosion testing methodology for hard protective coatings", Surface and Coatings Technology, 237 (2013) 313-319.

2012

  1. D. Li, S. Hassani, S. Poulin, J.A. Szpunar, L. Martinu, J.E. Klemberg-Sapieha, "Effect of Si and C concentration on the microstructure, and the mechanical, tribological and electrochemical properties of nanocomposite TiC/a-SiC:H/a-C:H coatings prepared by plasma enhanced chemical vapor deposition", J.Appl. Phys., 111 (2012) 043512.
     
  2. C. P. Liu, H. E. Wang, T. W. Ng, Z. H. Chen, W. F. Zhang, C. Yan, Y. B. Tang, I. Bello, L. Martinu, W. J.Zhang, and S. K. Jha, " Hybrid photovoltaic cells based on ZnO/Sb2S3/P3HT heterojunctions", Phys.Status Solidi B, 249(2012) 627.
     
  3. J. Capek, M. Hala, O. Zabeida, J.E. Klemberg-Sapieha and L. Martinu, "Steady state HiPIMS discharge optimization through the control of the magnetic field", J. Appl. Phys., 111 (2012) 023301.
     
  4. M. Hala, J. Capek, O. Zabeida, J. Klemberg-Sapieha, and L. Martinu; "Pulse management in high power pulsed magnetron sputtering of niobium", Surface and Coatings Technology, 204 (2010) 1616–1622.
     
  5. M. Hala, J. Capek, O. Zabeida, J. Klemberg-Sapieha, and L. Martinu, "Hysteresis-free deposition of niobium oxide films by HiPIMS using different pulse management strategies", J. Phys. D: Appl. Phys. 45 (2012) 055204.
     
  6. A. Anders, J. Capek, M. Hala, L. Martinu, "The recycling trap: A generalized explanation of discharge runaway in high power impulse magnetron sputtering", J. Phys. D: Appl. Phys. 45 (2012) 012003.
     
  7. B. Baloukas, L. Martinu, "WO3∕SiO2 composite optical films for the fabrication of electrochromic interference filters", Appl. Opt. 51 (2012) 3336-3346.
     
  8. M. Azzi and J.E. Klemberg-Sapieha, “Effect of microstructure on the corrosion behavior of TiN coatings”, Advanced Materials Research, 415-417 (2012) 1911-1916.
     
  9. E. Çetinörgü-Goldenberg, J. E. Klemberg-Sapieha, and L. Martinu, "Effect of postdeposition annealing on the structure,composition, and the mechanical and optical characteristics of niobium and tantalum oxide films", Applied Optics 51 (27 / 20)  (2012) 6498-6507.

2011

  1. M. Hala, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu; "Dynamics of HiPIMS Discharge Operated in Oxygen," IEEE Transactions on Plasma Science, 39 (2011) 2582-2583.
     
  2. E. Cetinorgu-Goldenberg, B. Baloukas, O. Zabeida, J. Klemberg-Sapieha and L. Martinu, "Optical and Tribo-Mechanical Stability of Optically Variable Interference Security Devices Prepared by Dual Ion Beam Sputtering", Applied Optics, 50(19) (2011) 3351-3359.
     
  3. Hong-En Wang, L.-X. Zheng, C.-P. Liu, Y.-K. Liu, C.-Y. Luan, H. Cheng, Y.Y. Li, L. Martinu, J.A. Zapien, I. Bello, "Rapid "Microwave Synthesis of Porous TiO2 Spheres and Their Applications in Dye-Sensitized Solar Cells", The Journal of Physical Chemistry C, 115(21) (2011) 10419-10425.
     
  4. Hong-En Wang, H. Cheng, C. Liu, X. Chen, Q. Jiang, Z. Lua, Y.Y. Li, C.Y. Chung, W.J. Zhang, J.A. Zapien, L. Martinu, I. Bello, "Facile synthesis and electrochemical characterization of porous and dense TiO2 nanospheres for lithium-ion battery applications", Journal of Power Sources, 196 (2011) 6394–6399.
     
  5. B. Baloukas, J.-M. Lamarre and L. Martinu, "Electrochromic interference filters fabricated from dense and porous tungsten oxide films", Solar En. Materials and Solar Cells, 95 (3) (2011) 807-815.
     
  6. B. Baloukas, J.-M. Lamarre and L. Martinu, "Active metameric security devices using an electrochromic material", Applied Optics, 50 (9) (2011) C41-C49.
     
  7. M. Azzi, J.E. Klemberg-Sapieha & L. Martinu, "Corrosion Behavior of Cr(Si)N/301 stainless steel system", ECS transactions, 35 (2011) 67-73.
     
  8. A.M. Wusatowska-Sarnek, B. Dubiel, A. Czyrska-Filemonowicz, P.R. Bhowal, N. Ben Salah, J.E. Klemberg-Sapieha, “Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (12) (2011) 3813-3825.
     
  9. H.W. Strauss, R.R. Chromik, S. Hassani, J.E. Klemberg-Sapieha, “In situ tribology of nanocomposite Ti-Si-C-H coatings prepared by PE-CVD”, Wear, 272 (2011) 133-148.
     
  10. D. Li, S. Guruvenket, S. Hassani, E. Bousser, M. Azzi, J.A. Szpunar, J.E. Klemberg-Sapieha, “Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 410”, Thin Solid Films, 519 (7) (2011) 3128–3134.
     
  11. D. Li, S. Guruvenket, J. E. Klemberg-Sapieha, "Corrosion and tribo-corrosion enhancement of SS301 and Ti–6Al–4V substrates by amorphous hydrogenated SiN/SiC/a-C multilayer coating architecture", Surface & Coatings Technology, 206 (2011) 1893–1898.

2010

  1. M. Azzi, M. Benkahoul, J.E. Klemberg-Sapieha, L. Martinu "Corrosion and mechanical properties of duplex-treated 301 stainless steel", Surface & Coatings Technology, 205 (5) (2010) 1557-1563.
     
  2. M. Azzi, P. Amirault, M. Paquette, J.E. Klemberg-Sapieha, L. Martinu, "Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers", Surface & Coatings Technology, 204 (2010) 3986-3994.
     
  3. M. Hala, O. Zabeida, B. Baloukas, J.E. Klemberg-Sapieha, L. Martinu, "Time- and species-resolved plasma imaging as a new diagnostic approach for HIPIMS discharge characterization", IEEE Transactions on Plasma Science, Special Issue on HIPIMS and High Power Glow Discharges, 2010, 38 (11) 2010 3035-3039.
     
  4. J. Houska, J. E. Klemberg-Sapieha, and L. Martinu, "Atom-by-atom simulations of chemical vapor deposition of hydrogenated silicon nitride", J. Appl. Phys., 107 (2010) 083501-1-9.
     
  5. S. Hassani, J.E Klemberg-Sapieha, L. Martinu, "Mechanical, tribological and erosion behaviour of super-elastic hard Ti-Si-C coatings prepared by PECVD", Surface and Coatings Technology, 205 (5) (2010) 1426-1430.
     
  6. S. Guruvenket, M. Azzi , D. Li, J.A. Szpunar , L. Martinu , J.E. Klemberg-Sapieha, "Structural, mechanical, tribological, and corrosion properties of a-SiC:H coatings prepared by PECVD", Surface & Coatings Technology, 204 (2010) 3358-3365.
     
  7. M. Hala, N. Viau, O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu, "Dynamics of reactive highpower impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging", J. Appl. Phys., 107 (2010) 043305-1-9.
     
  8. D. Li, S. Guruvenket, M. Azzi, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Corrosion and tribo-corrosion behavior of a-SiCx:H, a-SiNx:H and a-SiCxNy:H coatings on SS301 substrate", Surface and Coatings Technology, 204 (2010) 1616–1622.
     
  9. S. Hassani, M. Bielawski, W. Beres, M. Balazinski, L. Martinu, J.E. Klemberg-Sapieha, "Impact stress absorption and load spreading in multi-layered erosion-resistant coatings", Wear, 268 (2010) 770-776.
2009-2005

2009

  1. M. Dudek, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Effect of substrate bias on the micro- structure and properties of nanocom-posite titanium nitride – based films", Journal of Achievements in Materials and Manufacturing, Vol. 37, Dec. 2009, 416-421.
     
  2. S. Turcotte, S. Larouche, J.-N. Beaudry, L. Martinu, R.A. Masut, P. Desjardins, R. Leonelli, "Evidence of Valence Band Perturbations in GaAsN/GaAs(001): A Combined Variable-angle Spectroscopic Ellipsometry and Modulated Photoreflectance Investigation", Phys. Rev. B, 80 (2009) 085203.
     
  3. E. Çetinörgü, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Mechanical and Thermo-elastic Characteristics of Optical Thin Films Deposited by Dual Ion Beam Sputtering", Applied Optics, 48 (2009) 4536-4544.
     
  4. A. Amassian, M. Dudek, O. Zabeida, S.C. Gujrathi, J.E. Klemberg-Sapieha, L. Martinu, "Oxygen Incorporation and Charge Donor Activation via Subplantation During the Growth of Indium Tin Oxide Films", J. Vac. Sci. Technol. A, 27 (2009) 362-366.
     
  5. M. Dudek, A. Amassian, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Ion Bombardment-induced Enhancement of the Properties of Indium Tin Oxide Films Prepared by Plasma-assisted Reactive Magnetron Sputtering", Thin Solid Films, 517 (2009) 4576–4582.
     
  6. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Relationships between Composition and Properties of (Cr/Ti)SiN and (Cr/Ti)CN Alloys: An ab initio Study", Journal of Physics - Condensed Matter, 21 (2009) 285302.
     
  7. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Formation and Behavior of Unbonded Hydrogen in a-C:H of Various Compositions and Densities", Surface & Coatings Technology, 203 (2009) 3770–3776.
     
  8. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Atomistic Simulations of the Characteristics of TiSiN Nanocomposites of Various Compositions", Surface & Coatings Technology, 203 (2009) 3348-3355.
     
  9. J. Kalaš, R. Vernhes, S. Hřeben, J. Vlček, J.E. Klemberg-Sapieha, L. Martinu, "High-temperature Stability of the Mechanical and Optical Properties of Si–B–C–N Films Prepared by Magnetron Sputtering", Thin Solid Films, 518 (2009) 174-179.
     
  10. S. Guruvenket, D. Li, J.E. Klemberg-Sapieha, L. Martinu, J. Szpunar, "Mechanical and Tribological Properties of Duplex Treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN Coatings Deposited on 410 Low Alloy Stainless Steel", Surface and Coatings Technology, 203 (2009) 2905-2911.
     
  11. M. Azzi, M. Paquette, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Tribocorrosion Behavior of DLC-coated 316L Stainless Steel", Wear, 267 (2009) 860-866.
     
  12. M. Azzi, M. Benkahoul, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Tribological Properties of CrSiN-coated 301 Stainless Steel under Wet and Dry Conditions", Wear, 267 (2009) 882-889.
     
  13. M. Benkahoul, P. Robin, L. Martinu, J.E. Klemberg-Sapieha, "Tribological Properties of Duplex Cr–Si–N Coatings on SS410 Steel", Surface & Coatings Technology, 203 (2009) 934–940.
     
  14. K. I. Shingel, C. Roberge, O. Zabeida, M. Robert, J. E. Klemberg-Sapieha, “Solid emulsion gel as a novel construct for topical applications: synthesis, morphology and mechanical properties”, J. Mater. Sci: Mater. Med., 20 (2009) 681–689.

2008

  1. J. Čížek, J. Vlček, Š. Potocký, J. Houška, Z. Soukup, J. Kalaš, P. Jedrzejowski, J.E. Klemberg-Sapieha, L. Martinu, "Mechanical and Optical Properties of Quaternary Si–B–C–N Films Prepared by Reactive Magnetron Sputtering", Thin Solid Films, 516 (2008) 7286–7293.
     
  2. M. Creatore, S.M. Rieter, Y. Barrell, M.C.M. van de Sanden, R. Vernhes, L. Martinu, "Optical and Chemical Characterization of Expanding Thermal Plasma-deposited Carbon-containing Silicon Dioxide-like Films", Thin Solid Films, 516 (2008) 8547-8553.
     
  3. L.Ç. Özcan, F. Guay, R. Kashyap, L. Martinu, "Investigation of Refractive Index Modifications in CW CO2 Laser Written Planar Optical Waveguides", Opt. Commun., 281 (2008) 3686-3690.
     
  4. S. Hassani, J.E. Klemberg-Sapieha, M. Bielawski, W. Beres, L. Martinu, M. Balazinski, "Design of Hard Coating Architecture for the Optimization of Erosion Resistance", Wear, 265 (2008) 879–887.
     
  5. S. Larouche and L. Martinu, "Optical Filters with Prescribed Optical Thickness and Refined Refractive Indices", Applied Optics, 47 (2008) 4140-4146.
     
  6. E. Bousser, M. Benkahoul, L. Martinu, J.E. Klemberg-Sapieha, "Effect of Microstructure on the Erosion Resistance of Cr-Si-N Coatings", Surface and Coatings Technology, 203 (2008) 776-780.
     
  7. S. Hassani, M. Bielawski, W. Beres, L. Martinu, M. Balazinski, J.E. Klemberg-Sapieha, "Predictive Tools for the Design of Erosion Resistant Coatings", Surface and Coatings Technology, 203 (2008) 204-210.
     
  8. S. Larouche and L. Martinu, "OpenFilters: Open-Source Software for the Design, Optimization, and Synthesis of Optical Filters", Applied Optics, 47 (2008) C219-C230.
     
  9. J.-M. Lamarre, F. Billard, and L. Martinu, "Local Field Calculations of the Anisotropic Nonlinear Absorption Coefficient of Aligned Gold Nanorods Embedded in Silica", J. Opt. Soc. Am. B, 25 (2008) 961-971.
     
  10. J.-M. Lamarre, F. Billard, C. Harkati-Kerboua, M. Lequime, S. Roorda, and L. Martinu, "Anisotropic Nonlinear Optical Absorption of Gold Nanorods in a Silica Matrix", Optics Communications, 281 (2008) 331–340.
     
  11. B. Baloukas and L. Martinu, "Metameric Interference Security Image Structures", Applied Optics, 47 (2008) 1585 - 1593.
     
  12. M. Benkahoul, P. Robin, S.C. Gujrathi, L. Martinu, J.E. Klemberg-Sapieha, "Microstructure and mechanical properties of Cr–Si–N coatings prepared by pulsed reactive dual magnetron sputtering", Surface & Coatings Technology, 202 (2008) 3975–3980.
     
  13. L.C. Ozcan, F. Guay, R. Kashyap, L. Martinu, "Fabrication of buried waveguides in planar silica films using a direct CW laser writing technique", Journal of Non-Crystalline Solids, 354 (2008) 4833-4839.
     
  14. S. Larouche and L. Martinu, "Step method: A new synthesis method for the design of optical filers with intermediate refractive indices", Appl. Opt., 47 (2008) 4321-4330.

2007

  1. J.E. Klemberg-Sapieha, P. Jedrzejowski and L. Martinu, "Hard and Superhard Nanocomposite Coatings and their Tribo-mechanical Properties", J. Superhard Materials, 29 (2007) 147.
     
  2. A. Amassian, K. Kaminska, M. Suzuki, L. Martinu, K. Robbie, "Onset of shadowing-dominated growth in glancing angle deposition", App. Phys. Lett., 91 (2007) 173114-1-3.
     
  3. C. Harkati-Kerboua, J.-M. Lamarre, L. Martinu, S. Roorda, "Deformation, alignment and anisotropic optical properties of gold nanoparticles embedded in silica", Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, 257 (2007) 42-46.
     
  4. R. Snyders, E. Bousser, P. Amireault, J. E. Klemberg-Sapieha, E. Park, K. Taylor, K. Casey and L. Martinu "Tribo-Mechanical Properties of DLC Coatings Deposited on Nitrided Biomedical Stainless Steel" Plasma Process. Polym., 4 (2007) S1–S7.
     
  5. L.C. Ozcan, V. Treanton, Kashyap, L. Martinu, "High-Quality Flat-Top Micromachining of Silica by a Cw CO2 Laser" IEEE Photonics Technology Letters, 19 (2007) 459-461.
     
  6. R. Snyders, O. Zabeida, C. Roberges, K.I. Shingel, M.-P. Faure, L. Martinu, J.E. Klemberg-Sapieha, "Mechanism of Adhesion between Protein-based Hydrogels and Plasma Treated Polypropylene Backing", Surface Science, 601 (2007) 112-122.
     
  7. S. Larouche and L. Martinu, "Dispersion Implementation in Optical Filter Design by the Fourier Transform Method Using Correction Factors", Applied Optics, 46 (2007) 7436-7441.
     
  8. I. Zukerman, A. Raveh, Y. Shneor, R. Shneck, J.E. Klemberg-Saphieha, and L. Martinu, "Internal Stress of TiAl(B)N at High Temperatures", Surface and Coating Technology, 201 (2007) 6161- 6166.
     
  9. I. Zukerman, A. Raveh, Y. Landau, R. Weiss, R. Shneck, Y. Shneor, H. Kalman, J.E. Klemberg-Saphieha, L. Martinu, "Tribological Properties of Duplex Treated TiN/TiCN Coatings on Plasma Nitrided PH15-5 Steel", Surface & Coatings Technology 201 (2007) 6171–6175.
     
  10. I. Zukerman, A. Raveh, H. Kalman, J.E. Klemberg-Sapieha, L. Martinu, "Thermal Stability and Wear Resistance of Hard TiN/TiCN Coatings on Plasma Nitrides PH15-5 Steel" Wear, 263 (2007) 1249-1252.
     
  11. R. Snyders, K.I. Shingel, O. Zabeida, C. Roberges, M.-P. Faure, L. Martinu, and J.E. Klemberg-Sapieha, "Mechanical and Microstructural Properties of Hybrid Poly(ethylene glycol)-soy Protein Hydrogels for Wound Dressing Applications", J. Biomaterials Research, 83A (2007) 88-97.

2006

  1. A. Amassian, M. Svec, P. Desjardins, L. Martinu, "Interface Broadening Due to Ion Mixing During Thin Film Growth at the Radio-Frequency-Biased Electrode in a Plasma-Enhanced Chemical Vapor Deposition Environment", Journal of Vacuum Science and Technology A, 24 (2006) 2061-2069.
     
  2. V. Timoshevskii, M. Cote, G. Gilbert, R. Leonelli, S. Turcotte, J.-N. Beaudry, P. Desjardins, S. Larouche, L. Martinu, R.A. Masut, "Experimental and Theoretical Studies of the E+ Optical Transition in GaAsN Alloys", Phys. Rev. B, 74 (2006) 165120-1-165120-6.
     
  3. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Pulsed RF PECVD of a-SiNx:H Alloys: Properties, Growth Mechanism and Applications", J. Appl. Phys., 100 (2006) 63308.
     
  4. Y. Gao, N. Guo, B. Gauvreau, M. Rajabian, O. Skorobogata, E. Pone, O. Zabeida, L. Martinu, C. Dubois, M. Skorobogatiy, "Consecutive Solvent Evaporation and Co-Rolling Techniques for Polymer Multilayer Hollow Fiber Preform Fabrication", J. Mater. Res., 21 (2006) 1-9.
     
  5. P. Jedrzejowski, A. Amassian, E. Bousser, J.E. Klemberg-Sapieha, and L. Martinu, "Real-Time In-Situ Growth Study of TiN- and TiCxNy- Based Superhard Nanocomposite Coatings Using Spectroscopic Ellipsometry", Appl. Phys. Lett., 88 (2006) 071915.
     
  6. J. P. Masse, H. Szymanowski, O. Zabeida, A. Amassian, J.E. Klemberg-Sapieha and L. Martinu, "Stability and Effect of Annealing on the Optical Properties of Plasma Deposited Ta2O5 and Nb2O5 Films", Thin Solid Films, 515 (2006) 1674-1682.
     
  7. R. Vernhes, A. Amassian, J. E. Klemberg-Sapieha, L. Martinu, "RF Plasma Treatment of Porous SiNx:H Films for the Fabrication of Porous-Dense Multilayer Optical Filters with Optimized Interfaces", J. Appl. Phys., 99 (2006) 114315.
     
  8. A. Amassian, M. Gaidi, M. Chaker, L. Martinu, "Optical Depth Profiling of STO and Electro-optic PLZT Multilayer Structures for Active Waveguide Applications", J. Vac. Sci. Technol. A, 24 (2006) 55.
     
  9. A. Amassian, M. Svec, P. Desjardins, L. Martinu, "Dynamics of Ion Bombardment-Induced Modifications of Si(001) at the Radiofrequency-Biased Electrode in Low-Pressure Oxygen Plasmas: In Situ Spectroscopic Ellipsometry and Monte-Carlo Study", J. Appl. Phys., 100 (2006) 063526.

2005

  1. Amassian, P. Desjardins, L. Martinu, “Ion-Surface Interactions on c-Si (001) at the Radiofrequency-Powered Electrode in Low-Pressure Plasmas: Ex Situ Spectroscopic Ellipsometry and Monte-Carlo Simulation Study”, J. Vac. Sci. Technol. A24 (2005) 45. (also selected to appear in the December 19 issue of the Virtual Journal of Nanoscale Science and Technology).

  2. J.-M. Lamarre, Z. Yu, C. Harkati, S. Roorda, and L. Martinu, “Optical and Microstructural Properties of Nanocomposite Au/SiO2 Films Containing Particles Deformed by Heavy Ion Irradiation", Thin Solid Films, 479 (2005) 232-237.

  3. M. Tabbal, T. Christidis, P. Merel, M.A. El Khakani, M. Chaker, A. Amassian, L. Martinu, “Correlation between the sp2-phase Nanostructure and the Physical Properties of Unhydrogenated   Carbon Nitride”, J. Appl. Physics, 98 (2005) 44310-8. 

  4. H. Szymanowski, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, “Optical Properties and Microstructure of Plasma Deposited Ta2O5 and Nb2O5 films”, J. Vac. Sci. Technol. A 23(2), (2005) 241-247.

  5. D.-Q. Yang, S. Poulin, L. Martinu, J. E. Klemberg-Sapieha, O. Zabeida and E. Sacher, “Microscale Chemical and Electrostatic Surface Patterning of Dow Cyclotene by N2 Plasma”, Appl. Surf. Sci., 242 (2005) 419-427.

  6. E. Klemberg-Sapieha, L. Martinu, N.L.S. Yamasaki and C.W. Lantman, “Tailoring the Adhesion of Optical Films on Polymethyl-methacrylate by Plasma-induced Surface Stabilization”, Thin Solid Films, 476 (2005) 101-107.

  7. K. Kaminska, A. Amassian, L. Martinu, K. Robbie, “Growth of Vacuum Evaporated Ultra-Porous Silicon Studied With Spectroscopic Ellipsometry and Scanning Electron Microscopy”, J. Appl. Phys. 97 (2005) 13511.

  8. M. Gaidi, L. Stafford, A. Amassian, M. Chaker, J. Margot, L. Martinu, and M.    Kulishov, “Influence of the Microstructure on the Optical Characteristics of SrTiO3 Thin Films”, Journal of Materials Research, 20 (2005) 68.

  9. M. Azzi, M. Reza Bateni, J.A. Szpunar, P. Jedrzejowski, J.E. Klemberg-Sapieha, “The Effect of Texture on Friction of AISI304 Stainless Steel”, Material Science Forum, 495-497 (2005) 1579-1584.
2004-2000

2004

  1. A. Amassian, R. Vernhes, J.E. Klemberg-Sapieha, P. Desjardins, L. Martinu “Interface Engineering During Plasma-enhanced Chemical Vapor Deposition of Porous/dense SiN1.3 Optical Multilayers”, Thin Solid Films, 469-470 (2004) 47-53.

  2. A. Raveh, A. Rubinshtein, M. Weiss, M.H. Mintz , J.E. Klemberg-Sapieha, and L. Martinu, “Ta-C Micro-Composite Material Formed by Heat Treatment of Plasma Carburized Layer”, Thin Solid Films, 466 (2004) 151-157.

  3. P. Jedrzejowski, J. E. Klemberg-Sapieha, L. Martinu, “Quaternary Hard Nanocomposite TiCxNy/SiCN Coatings Prepared by PECVD”, Thin Solid Films, 466 (2004) 189-196.

  4. S. Larouche, H. Szymanowski, J.E. Klemberg-Sapieha, L. Martinu, and S. Gujrathi, “Microstructure of Plasma-Deposited SiO2/TiO2 Optical Films”, J. Vac. Sci. Technol. A, 22(2) (2004) Jul/Aug. 1200-1207.

  5. J.E. Klemberg-Sapieha, J. Oberste-Berghaus, L. Martinu, R. Blacker, I. Stevenson, G. Sadkhin, D. Morton, S. McEldowney, B. Klinger, P. Martin, N. Court, S. Dligatch, M. Gross, R.P. Netterfield, “Mechanical Characteristics of Optical Coatings Prepared by Different Techniques: A Round Robin Study”, Applied Optics, 43 (13) (2004) 2670-2679.

  6. P. Jedrzejowski, B. Baloukas, J.E. Klemberg-Sapieha, and L. Martinu, “Optical Characteristics and Color of TiN/SiN1.3 Nanocomposite Coatings, J. Vac. Sci. Technol. A, 22(3) (2004) 725-733.

  7. A. Raveh, A. Rubinshtein, M. Weiss, M.H. Mintz , J.E. Klemberg-Sapieha, and L. Martinu, “Ta-C Micro-Composite Material Formed by Heat Treatment of Plasma Carburized Layer”, Thin Solid Films, 466 (2004) 151-157.
     

  8. M. Gaidi, A. Amassian, M. Chaker, M. Kulishov, and L. Martinu, “Pulsed Laser Deposition of PLZT Films : Structural and Optical Characterization”, Applied Surface Science, 226 (2004) 347-354.

  9. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, “Single Material Inhomogeneous Optical Filters Based on Microstructural Gradients in Plasma Deposited Silicon Nitride”, Applied Optics, , 43 (2004) 97-103.

  10. A. Amassian, P. Desjardins and L. Martinu, “Study of TiO2 Film Growth Mechanism in Low-Pressure Plasma by in situ real-time spectroscopic ellipsometry”’ Thin Solid Films, 447-448 (2004) 40-45. 

  11. L. Martinu and R. Shimshock, “Advances in Optical Coatings on Plastic Substrates”, Vacuum and Coating Technology, March 2003, pp. 22-29 (invited).

  12. P. Jedrzejowski, J. Cizek, J.E. Klemberg-Sapieha, J. Vlcek, and L. Martinu, “Plasma Deposition and Properties of SiCN Films – Thin Solid Films, 447-448 (2004) 201-207.

2003

  1. A. M. Wrobel, I. Blaszczyk, A. Walkiewicz-Pietrzykowska, A. Tracz, J. E. Klemberg-Sapieha, T. Aoki, and Y. Hatanaka “Remote hydrogen-nitrogen plasma chemical vapor deposition from a tetramethyldisilazane source. Part 1. Mechanism of process, structure and surface morphology of deposited amorphous hydrogenated silicon carbonitride films” J. Mater. Chem., 13 (2003 ) 731 -737.
     
  2. P. Jedrzejowski, J. E. Klemberg-Sapieha, L. Martinu, “ Relationship between the mechanical properties and the microstructure of nanocomposite TiN/SiN1.3 coatings by low temperature plasma enchanced chemical vapor deposition” Thin Solid Films, 426 (2003) 150-156.
     
  3. L. Martinu and R. Shimshock, “Advances in Optical Coatings on Plastic Substrates”, Vacuum and Coating Technology, March 2003, pp. 22-29 (invited).
     
  4. P. Jedrzejowski, J.E. Klemberg-Sapieha, and L. Martinu, Microstructure and Mechanical Properties of Plamas Deposited Ultrahard TiN/SiN1.3 Nano-Composite Films, Thin Solid Films, 426 (2003) 150-159.
     
  5. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Nakanishi, T. Aoki, and Y. Hatanaka “Remote Hydrogen Plasma Chemical Vapor Deposition from (Dimethylsilyl)(trimethylsilyl)methane. 1. Kinetics of Process; Chemical and Morphological Structure of Deposited Silicon-Carbon Films” Chemistry of Materials, Vol.15, Nb. 8 (2003 ) 1749-1756.
     
  6. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Nakanishi, T. Aoki, and Y. Hatanaka “Remote Hydrogen Plasma Chemical Vapor Deposition from (Dimethylsilyl)(trimethylsilyl)methane. 2. Property- Structure Relationships for Resulting Silicon-Carbon Films” Chemistry of Materials, Vol.15, Nb. 8 (2003 ) 1757-1762.

2002

  1. D. Poitras, S. Larouche and L. Martinu, “Design and Plasma Deposition of Dispersion-corrected Multiband Rugate Filters”, Applied Optics 41 (2002) 5249-5255.
     
  2. J. Hong, F. Truica-Marasescu, L. Martinu and M.R. Wertheimer, “An Investigation of Plasma-Polymer Interactions by Mass Spectrometry”, Plasmas and Polymers, 7 (2002) 245-260.
     
  3. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Hatanaka, T. Aoki and Y. Nakanishi, “Remote Hydrogen Plasma Chemical Vapor Deposition of Silocon-Carbon Thin-Film Materials from a Hexamethylsilane Source: Characterization of the Process and Deposits” Journal of Applied Polymer Science, (2002) 1445-1458.

2001

  1. A. Sadough-Vanini, D.-Q. Yang, L. Martinu, and E. Sacher, “The Adhesion of Evaporated Copper to Dow Cyclotene 3022, Determined by Microscratch Testing”, The Journal of Adhesion, 77 (2001) 309-321.
     
  2. A. Lefèvre, L.J. Laurent, L. Martinu, and M.R. Wertheimer, "Structural Properties of Silicon Dioxide Thin Films Densified by Medium-energy Particles", Phys. Rev. B, 64 (2001) 115429.
     
  3. D.-Q. Yang, L. Martinu, E. Sacher, and A. Sadough-Vanini, "Nitrogen Plasma Treatment of the Dow 3022 Surface and its Reaction with Evaporated Copper", Appl. Surf. Sci., 177 (2001) 85-95.
     
  4. D. Dalacu, J.E. Klemberg-Sapieha, and L. Martinu, “XPS Analysis of Discontinuous Gold Films”, Surface Science, 472 (2001) 33-40.
     
  5. D. Dalacu and L. Martinu, “Optical Properties of Discontinuous Gold Films: Finite Size Effects”, J. Opt. Soc. Am. B, 18 (2001) 85-90.
     
  6. A. Raveh, J. Danon, A. Hayon, A. Rubinshtein, R. Shneck, J.E. Klemberg-Sapieha, and L. Martinu, “Characterization of Carburized Tantalum Layers Produced by Inductive RF Plasma”, Thin Solid Films, 392 (2001) 56-64.
     
  7. C. Campillo, S. Illias, C.F.M. Borges, M. Moisan, and L. Martinu, "Enhanced Diamond Film Adhesion on Colbalt-Cemented WC Substrate", New Diamond and Frontier Carbon Technology, 11 (2001) 147-156.

2000

  1. D. Dalacu and L. Martinu, “Temperature Dependence of the Surface Plasmon Resonance in Au/SiOFilms”, Appl. Phys. Lett., 77 (2000) 4283-4285.
     
  2. L. Martinu and D. Poitras, "Plasma Deposition of Optical Films and Coatings: A Review", J. Vac. Sci. Technol. A, 18 (2000) 2619-2645, (invited).
     
  3. J. Vlcek, K. Rusnak, V. Hajek, and L. Martinu, “New Approach to Understanding the Reactive Magnetron Sputtering of Hard Carbon Nitride Films”, Diamond and Related Materials, 9 (2000) 582-586.
     
  4. S.G. Wallace, B.J. Robinson, P. Mascher, H.K. Haugen, D.A. Thompson, D. Dalacu, and L. Martinu, "Refractive Indices of InGaAsP Lattice-matched to GaAs at Wavelengths Relevant to Device Design",  Appl. Phys. Letters, 26 (2000) 2791-2793.
     
  5. O. Zabeida, A. Hallil, M. R. Wertheimer, and L. Martinu, "Time Resolved Measurements of Ion Energy Distributions in Dual-mode Pulsed Microwave/Radiofrequency Plasma", J. Appl. Phys., 88 (2000) 635.
     
  6. A. Hallil, O. Zabeida, M.R. Wertheimer, and L. Martinu, "Mass-resolved Ion Energy Distributions in Continuous Dual Mode Microwave/Radiofrequency Plasmas in Argon and Nitrogen", J. Vac. Sci. Technol A, 18 (2000) 882-890.
     
  7. A. Rubinshtein, R. Shneck, A. Raveh, J.E. Klemberg-Sapieha, and L. Martinu, "Carburizing of Tantalum by Radio-Frequency Plasma Assisted CVD", J. Vac. Sci. Technol. A, 18 (2000) 2017-2022.
     
  8. D. Poitras and L. Martinu, "Interphase in Plasma-deposited Films on Plastics: Effect on the Spectral Properties of Optical Filters", Applied Optics, 39 (2000) 1168.
     
  9. A. Bergeron, D. Poitras, and L. Martinu, "Interphase in Plasma-deposited Silicon Nitride Optical Films on Polycarbonate: In-situ Ellipsometric Characterization", Opt. Eng., 39(2000) 825.
     
  10. D. Dalacu and L. Martinu, "Spectroellipsometric Characterization of Plasma-deposited Au/SiO2 Nanocomposite Films", J. Appl. Phys., 87 (2000) 228.
     
  11. A.M. Wróbel, A. Walkiewicz-Pietrzkowska, M. Stasiak, J.E. Klemberg-Sapieha, D.M. Bieliński, T. Aoki and Y. Hatanaka “Remote Microwave Plasma Chemical Vapor Deposition of Thin Si:N:C Films from Single-Source Precursor”, Plasmas and Polymers, Journal of Wide Bandgap Materials, Vol. 8, No. 1, (2000) 1- 12.
     
  12. D. Rats, L. Martinu, and J. von Stebut, "Mechanical Properties of Plasma-deposited SiOxNy Coatings on Polymer Substrates Determined by Low Carrying-capacity Techniques", Surface and Coatings Technology, 123 (2000) 36-43.

 

1999-1995

1999

  1. A. Leonard, P. Bertrand, M.K. Shi, E. Sacher, and L. Martinu, "Plasma Surface Modification of Polymers Studied by TOF-SIMS", Plasmas and Polymers, 4 (1999) 97-111.
     
  2. J. Vlcek, K. Rusnak, V. Hajek, and L. Martinu, "Reactive Magnetron Sputtering of CNx Films: Ion Bombardment Effects and Process Characterization Using Optical Emission Spectroscopy", J. Appl. Phys., 86 (1999) 3646.
     
  3. A.C. Fozza, J.E. Klemberg-Sapieha, and M.R. Wertheimer, "Vacuum Ultraviolet Irradiation of Polymers", Plasmas and Polymers 4, (1999) 183-205.
     
  4. S. Dahl, D. Rats, J. von Stebut, L. Martinu, and J. E. Klemberg-Sapieha, "Micro-Mechanical Characterization of Plasma Treated Polymer Surfaces", Thin Solid Films, 355-356 (1999) 290-294.
     
  5. O. Zabeida and L. Martinu, "Ion Energy Distributions in Pulsed Large Area Microwave Plasma", J. Appl. Phys., 85 (1999) 6366-6372.
     
  6. V. Hajek, K. Rusnak, J. Vlcek, L. Martinu, and S.C. Gujrathi, "Influence of Substrate Bias Voltage on the Properties of CNFilms Prepared by Reactive Magnetron Sputtering", J. Vac. Sci. Technol. A., 17 (1999) 899-908.
     
  7. D. Dalacu and L. Martinu, "Spectroellipsometric Characterization of Plasma-deposited Au/Fluoropolymer Nanocomposite Films", J. Vac. Sci. Technol. A, 17 (1999) 877-883.
     
  8. D. Rats, D. Poitras, J.M. Soro, L. Martinu, and J. von Stebut, "Mechanical Properties of Plasma-deposited Silicon–based Inhomogeneous Optical Coatings", Surface and Coatings Technol., 111 (1999) 220-228.
     
  9. D. Rats, V. Hajek, and L. Martinu, "Micro-scratch Analysis and Mechanical Properties of Plasma-deposited Silicon-based Coatings on Polymer Substrates", Thin Solid Films, 340 (1999) 33-39.

1998

  1. S. Schelz, L. Martinu and M. Moisan, "Diamond Nucleation Enhancement by Pretreating the Silicon Substrate with a Fluorocarbon Plasma", Diamond and Related Materials, 7 (1998) 1291-1302.
     
  2. A. Bergeron, J.E. Klemberg-Sapieha and L. Martinu, "Structure of the Interfacial Region between Polycarbonate and Plasma-deposited SiN1.3 and SiO2 Optical Coatings Studied by Ellipsometry", J. Vac. Sci. Technol. A, 16 (1998) 3227-3234.
     
  3. D. Poitras and L. Martinu, "Simple Method for Determining Slowly Varying Refractive Index Profiles from in situ Spectrophotometric Measurements", Applied Optics, 37(19) (1998) 4160-4167.
     
  4. N. Bertrand, B. Drévillon, A. Gheorghiu, C. Sénémaud, L. Martinu and J.E. Klemberg-Sapieha, "Adhesion Improvement of Plasma-deposited Silica Thin Films on Stainless Steel Substrate Studied by X-ray Photoemission Spectroscopy and In Situ Infrared Ellipsometry", J. Vac. Sci. Technol. A, 16 (1998) 116-123.
     
  5. M. Bousmina, Hua Qiu, M. Grmela and J.E. Klemberg-Sapieha, “Diffusion at Polymer/Polymer Interfaces Probed by Rheological Tools”, Macromolecules, 31 (1998) 8273-8280.
     
  6. A.S. da Silva Sobrinho, M. Latrèche, G. Czeremuszkin, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Transparent Barrier Coatings on Polyethylene Terephthalate by Single- and Dual-Frequency Plasma-Enhanced Chemical Vapor Deposition", J. Vac. Sci. Technol. A, 16 (1998) 3190-3198.
     
  7. M.R. Wertheimer, J.E. Klemberg-Sapieha, J. Cerny and S. Liang "Modification of Active Carbon  by Hydrophobic Plasma Polymers : II Fabric Substrates", Plasmas and Polymers, 3 (1998) 151-163.
     
  8. A.S. da Silva Sobrinho, N. Schühler, J.E. Klemberg-Sapieha, M.R. Wertheimer, M. Andrews and S.C. Gujrathi, "Plasma-Deposited Silicon Oxide and Silicon Nitride Films on Poly(ethylene-terephthalate):  A Multitechnique Study of the Interphase Regions", J. Vac. Sci. Technol. A, 16 (1998) 2021 - 2030.

1997

  1. E. Sacher, L. Martinu et M. Meunier, "La métallisation de polymères:  cuivre sur les fluoropolymères", J. Phys. IV,  France, 7 (1997) C6-239-247.
     
  2. V. Hajek, K. Rusnak, J. Vlcek, L. Martinu and H.M. Hawthorne, "Tribological Study of CNX Films Prepared by Reactive D.C. Magnetron Sputtering", Wear, 213 (1997) 80-86.
     
  3. S. Schelz, C.F.M. Borges, L. Martinu and M. Moisan, "Chemical Vapor Deposition of Diamond Films on Hydrofluoric Acid Etched Silicon Substrates", J. Vac. Sci. Technol A, 15(5) (1997) 2743-2749.
     
  4. M.R. Wertheimer, L. Martinu and J.E. Klemberg-Sapieha, "NSERC Industrial Research Chair on Low Pressure Plasma Processing of Materials", Plasmas and Polymers, 2 (1997) 53-64.
     
  5. J.E. Klemberg-Sapieha, D. Poitras, L. Martinu, N.L.S. Yamasaki, C.W. Lantman, "Effect of Interface on the Characteristics of Functional Films Deposited on Polycarbonate in Dual-Frequency Plasma", J. Vac. Sci. Technol. A., 15(3) (1997) 985-991.
     
  6. D. Popovici, J.E. Klemberg-Sapieha, G. Czeremuszkin, E. Sacher, M. Meunier and L. Martinu, "Copper Metallization of Teflon AF-1600, Using Evaporation and Sputtering, for Multilevel Interconnect Devices", Microelectronic Engineering, 33 (1997) 217-222.
     
  7. A. Houdayer, G. Cerny, J.E. Klemberg-Sapieha, G. Czeremuszkin and M.R. Wertheimer, "MeV Proton Irradiations and Atomic Oxygen Exposure of Spacecraft Materials with SiO2 Protective Coatings", Nucl. Instrum. and Meth. in Phys. Res. Section B, 131 (1997) 335-340.
     
  8. A.C. Fozza, J. Roch, J.E. Klemberg-Sapieha, A. Kruse, A. Holländer and M.R. Wertheimer, "Oxidation and Ablation of Polymers by Vacuum-UV Radiation from Low-Pressure Plasmas", Nucl. Instrum. and Meth. in Phys. Res. Section B, 131 (1997) 205-210.
     
  9. E. Sacher and J.E. Klemberg-Sapieha, "An Analysis of the X-ray Photoelectron Spectrum of Teflon AF1600", J. Vac. Sci. Technol. A, 15 (4) (1997), 2143-2147.

1996

  1. N. Bertrand, B. Drévillon, J.E. Klemberg-Sapieha and L. Martinu, "In situ IR Ellipsometry Study of the Adhesion and Growth of Plasma Deposited Silica Thin Films on Stainless Steel Substrates", Thin Solid Films, 290-291 (1996) 264-270.
     
  2. S. Vallon, R. Brenot, A. Hofrichter, B. Drévillon, A. Gheorghiu, C. Sénémaud, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Mechanisms of Silica Layers on Plasma-Treated Polymers.  Part II:  Polypropylene", J. Adh. Sci. Technol., 10(12) (1996) 1313-1332.
     
  3. S. Vallon, A. Hofrichter, L. Guyot, B. Drévillon, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Mechanisms of Silica Layers on Plasma-Treated Polymers.  Part I:  Polycarbonate", J. Adh. Sci. Technol., 10 (12) (1996) 1287-1311.
     
  4. S. Vallon, A. Hofrichter, B. Drévillon, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Improvement of Silica Layers to Polypropylene Induced by Nitrogen Plasma Treatment", Thin Solid Films, 290/291 (1996) 68-73.
     
  5. S. Vallon, B. Drévillon, F. Poncin-Epaillard, J.E. Klemberg-Sapieha and L. Martinu, "Argon Plasma Treatment of Polycarbonate:  In situ Spectroellipsometry Study and Polymer Characterizations", J. Vac. Sci. Technol. A., 14 (1996) 3194-3199.
     
  6. C.F.M. Borges, S. Schelz, L. Martinu and M. Moisan, "Effect of Silicon Substrate Orientation on the Nucleation and Adhesion of CVD Diamond Films", Diamond and Related Materials, 5 (1996) 1402-1406.
     
  7. J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, P. Günther, R. Schellin, C. Thielemann and G. Sessler, "Plasma Deposition of Low Stress Electret Films for Electroacoustic and Solar Cell Applications", J. Vac. Sci. Technol. A, 14 (1996) 2775-2779.
     
  8. D. Poitras, P. Leroux, J.E. Klemberg-Sapieha, S.C. Gujrathi and L. Martinu, "Characterization of Homogeneous and Inhomogeneous Si-based Optical Coatings Deposited in Dual-Frequency Plasma", Optical Engineering, 35(9) (1996), 2693-2699.
     
  9. S.C. Gujrathi, D. Poitras, J.E. Klemberg-Sapieha and L. Martinu, "ERD-TOF Characterization of Silicon Compound Multilayer and Graded Index Optical Coatings", Nuclear Instruments and Methods in Physics Research B, 118 (1996) 560-565.
     
  10. C.F.M. Borges, S. Schelz, L. St-Onge, M. Moisan and L. Martinu, "Silicon Contamination of Diamond Films Deposited on Si Substrates in Fused Silica-based Reactors", J. Appl. Phys., 79 (1996) 3290-3298.
     
  11. M.R. Wertheimer, H.R. Thomas, M.J. Perri, J.E. Klemberg-Sapieha, and L. Martinu, "Plasmas and Polymers:  From Laboratory to Large Scale Commercialization", Pure and Applied Chemistry, 68(5) (1996), 1047-1053 (invited).
     
  12. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "The Influence of Vacuum-Ultraviolet Radiation of Polyethylene terephthalate", J. Polym. Sci.-A:  Polym. Chem. 34 (1996) 1511-1516.
     
  13. A. Nihlstrand, T. Hjertberg, H.P. Schreiber and J.E. Klemberg-Sapieha, "Plasma Treatment and Adhesion Properties of a Rubber-Modified Polypropylene", J. Adhesion Sci. Technol., 10 (7) (1996) 651-675.

1995

  1. P. Reinke, S. Bureau, J.E. Klemberg-Sapieha, and L. Martinu, "Ion Energy Distributions in Dual-and Single-mode Microwave/Radiofrequency Plasma", J. Appl. Phys., 78(8) (1995) 4855-4858.
     
  2. L. Martinu, "Advances in Diamond, Diamond-like Carbon and Related Materials", Fine Mechanics and Optics (JMO), 40 (5-6)(1995) 186-189 (invited).
     
  3. M.K. Shi, L. Martinu, E. Sacher, A. Selmani, M.R. Wertheimer and A. Yelon, "Angle-Resolved XPS Study of Plasma-Treated Teflon PFA Surfaces", Surface and Interface Analysis, 23 (1995) 99-104.
     
  4. A. Lian, L. Martinu and M.R. Wertheimer, "Electrical Conduction in Double Layer P‑SiO2/Polymer Dielectric Structures", IEEE Trans. DEI, 2 (1995) 62-73.
     
  5. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Polymer Oxidation Induced by Vacuum-Ultraviolet Emission", Surface and Coatings Technol., 74-75 (1995) 55-58.
     
  6. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Vacuum-Ultraviolet Induced Oxidation of Polymers: Polyethylene and Polypropylene", J. Polym. Sci.-A: Polym. Chem., 33 (1995) 2013-2025.
     
  7. W. Brinker, W. Wirges, G. Przyrembel, R. Gerhard-Multhaupt, J.E. Klemberg-Sapieha, L. Martinu, D. Poitras and M.R. Wertheimer, "Metallized Viscoelastic Control Layers for Light-Valve Projection Displays", Displays, 16 (1) (1995) 13-20.
1994-1989

1994

  1. P. Reinke, J.E. Klemberg-Sapieha, and L. Martinu, "Effect of Amorphous Carbon Layers on the Growth of Diamond in Dual-Frequency Plasma", J. Appl. Phys. 76 (10)(1994) 5754-5759.
     
  2. L. Martinu, J.E. Klemberg-Sapieha, O.M. Küttel, A. Raveh and M.R. Wertheimer, "Critical Ion Energy and Ion Flux in the Growth of Films by PECVD", J. Vac. Sci. Technol. A, 12 (4) (1994), 1360-1364.
     
  3. M.K. Shi, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer and A. Yelon, "Fluoro­polymer Surface Modification for Enhanced Metal Adhesion", J. Adh. Sci. Technol. 8(10) (1994), 1129-1141.
     
  4. E. Poiré, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, S. Liang, S.S. Barton and J.A. MacDonald, "Modification of Active Carbon by Hydrophobic Plasma Polymers", J. Appl. Polym. Sci.: Appl. Polym. Symp., 54 (1994) 185-196.
     
  5. M.K. Shi, B. Lamontagne, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer, and A. Yelon, "Metallization of Teflon PFA: II.  Interaction of Ti, Ag and Au measured by XPS", J. Vac. Sci. Technol. A, 12 (3) (1994), 807-812.
     
  6. M.K. Shi, B. Lamontagne, A. Selmani and L. Martinu, "X-Ray Photoelectron Spectroscopy Study of X-Ray Irradiated Metal/Fluoropolymer Interfaces", J. Vac. Sci. Technol. A, 12 (1) (1994)44-50.
     
  7. M.K. Shi, B. Lamontagne, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer and A. Yelon, "Metallization of Teflon PFA: I. Interactions of Evaporated Cr and Al Measured by X-ray Photoelectron Spectroscopy", J. Vac. Sci. Technol. A, 12 (1) (1994) 29-34.
     
  8. A. Hollander, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Vacuum Ultraviolet Induced Oxidation of Polyethylene", Macromolecules, 27, (1994) 2893-2895.

1993

  1. M.K. Shi, B. Lamontagne, L. Martinu and A. Selmani, "X-Ray Induced Modification of Metal/Fluoropolymer Interfaces", J. Appl. Phys., 74(3) (1993) 1744-1746.
     
  2. E.B.D. Bourdon, A. Raveh, S.C. Gujrathi and L. Martinu, "Etching of a-C:H Films by an Atomic Oxygen Beam", J. Vac. Sci. Technol. A, 11 (1993), 2530-2535.
     
  3. S. Sapieha, J. Cerny, J.E. Klemberg-Sapieha and L. Martinu, "Corona Versus Low Pressure Plasma Treatment:  Effect on Surface Properties and Adhesion of Polymers", J. Adhesion, 42 (1993), 91-102.
     
  4. E.M. Liston, L. Martinu and M.R. Wertheimer, "Plasma Surface Modification of Polymers for Improved Adhesion:  A Critical Review", J. Adh. Sci. Technol., 7 (10) (1993), 1091-1127 (invited).
     
  5. A. Raveh, L. Martinu, H.M. Hawthorne and M.R. Wertheimer, "Mechanical Properties of Dual-Frequency Plasma Deposited Diamond-like Carbon", Surf. Coat. Technol., 58 (1993) 45-55.
     
  6. L. Martinu, A. Raveh, D. Boutard, S. Houle, D. Poitras, N. Vella and M.R. Wertheimer, "Properties and Stability of Diamond-Like Carbon Films Related to Bonded and Unbonded Hydrogen", Diamond and Related Materials, 2 (1993) 673-677.

1992

  1. N. Amyot, J.E. Klemberg-Sapieha, M.R. Wertheimer, Y. Ségui, M. Moisan, "Electrical and structural studies of plasma-polymerized fluorocarbon films", Electrical Insulation, IEEE Transactions on 27 (6), (1992) 1101-1107.
     
  2. A. Raveh, L. Martinu, S.C. Gujrathi, J..E Klemberg-Sapieha, M.R. Wertheimer, "Structure-property relationships in dual-frequency plasma deposited hard aC: H films", Surface and Coatings Technology 53 (3), (1992) 275-282.
     
  3. P. Guenther, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, "Charge storage in plasma deposited thin films", Electrical Insulation and Dielectric Phenomena, Annual Report (1992) 67 - 73.
  4. L. Martinu, A. Raveh, A. Domingue, L. Bertrand, J.E. Klemberg-Sapieha, S.C. Gujrathi, M.R. Wertheimer, "Hard carbon films deposited under high ion flux", Thin Solid Films 208 (1), (1992) 42-47.
     
  5. O.M. Küttel, L. Martinu, D. Poitras, J.E. Klemberg-Sapieha, M.R. Wertheimer, "Diamond-like carbon films deposited in a dual microwave-radio-frequency plasma", Materials Science and Engineering: B 11 (1), (1992) 321-324.

1991

  1. J.E. Klemberg‑Sapieha, O.M. Küttel, L. Martinu and M.R. Wertheimer, "Dual-Frequency N2 and NH3 Plasma Modification of Polyethylene and Polyimide", J. Vac. Sci. Technol. A, 9 (1991) 2975-2981.
     
  2. A. Raveh, D. Marouani, R. Ydgar, J.E. Klemberg-Sapieha and A. Bettelheim, "Aging Effect of an Epoxy Resin on Joining of Aluminum Plates", J. of Adhesion, 36 (1991) 109-124.

1990

  1. O.M. Küttel, J.E. Klemberg‑Sapieha, L. Martinu and M.R. Wertheimer, "Energy Fluxes in Mixed Microwave/Radio Frequency Plasma", Thin Solid Films, 193/194 (1990) 155‑163.
     
  2. J.E. Klemberg‑Sapieha, O.M. Küttel, L. Martinu and M.R. Wertheimer, "Dual Microwave/Radio Frequency Plasma Deposition of Functional Coatings", Thin Solid Films, 193/194 (1990) 965‑972.
     
  3. R. d'Agostino, L. Martinu and V. Pische, "Effect of Bias and Temperature on the Bulk and Surface Properties of Gold‑containing Plasma Polymerized Fluorocarbons", Plasma Chemistry and Plasma Processing, 11 (1990) 1‑14.
     
  4. S. Sapieha, M. Verreault, J.E. Klemberg-Sapieha, E. Sacher and M.R. Wertheimer, "X-Ray Photoelectron Study of the Plasma Fluorination of Lignocellulose", Appl. Surf. Sci., 44 (1990) 165‑169.

1989

  1. L. Martinu, J.E. Klemberg‑Sapieha and M.R. Wertheimer, "Dual‑Mode Microwave/Radio Frequency Plasma Deposition of Dielectric Thin Films", Applied Physics Letters, 54 (1989) 2645‑2647.
Comptes rendus de conférences
  1. L. Martinu, "Holistic approach to protective coatings for harsh environments: From understanding the deterioration mechanisms to the design, fabrication and testing", First National Symposium of the Mexican Network on Surface Engineering and Tribology, Manzanillo, Mexico, November 11-13, 2015 (plenary talk).
  2. J.E. Klemberg-Sapieha, "Functional Coatings for Aerospace Applications", TFPC 2015, The 7th International conference on Innovations in Thin Film Processing and Characterization, 16-20 November 2015, Nancy, France (plenary talk).

  3. Hála M., Čapek J., Vernhes R., Zabeida O., Klemberg-Sapieha J. E., Martinu L., "Reactive HiPIMS pulse optimization strategies in fabrication of all-dielectric optical coatings", 6th International Conference on Fundamentals and Industrial Applications of HIPIMS, Braunschweig, Germany, June 2015.
  4. J. Lengaigne, E. Herrera, A. Raveh, E. Bousser, L. Martinu1, J.E. Klemberg-Sapieha, "Nano-Grained Hard Protective Titanium Carbide Coatings Prepared by PECVD", Sponsored Student Presentation, SVC 58th Annual Technical Conference, Society of Vacuum Coaters, Santa Clara, CA, April 2015.

  5. A. Raveh, Z. Rożek, T. Poirié, E. Herrera, E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "Protective Hard ZrN-TiN Multilayer and Nanolaminate Coatings", SVC 58th Annual Technical Conference, Society of Vacuum Coaters, Santa Clara, CA, April 2015.

  6. R. Vernhes and L. Martinu, "Metrology of Optical Coatings: The R&T Direct Absorption Method for the Determination of Low Absorption Levels in Dielectric Films", SVC 58th Annual Technical Conference, Society of Vacuum Coaters, Santa Clara, CA, April 2015.

  7. T. Schmitt, J. Schmitt, T. Poirié, O. Zabeida, J.E. Klemberg-­Sapieha and L. Martinu, “Tribo‐mechanical properties of highly elastic hybrid SiOCH optical coatings”, ICMCTF, San Diego, CA, April 2015.
  8. M. Azzi, L. Vernhes, E. Bousser, J.E. Klemberg-Sapieha, “Tribo-mechanical properties of CoCr and NiWCrB hardfacing superalloy coating systems”, Proceedings of ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE2014), volume 14, ISBN: 978-0-7918-4963-7. Paper No. IMECE2014-39372, pp. V014T11A028; 10 pages, doi:10.1115/IMECE2014-39372

  9. M. Azzi, E. Bitar-Nehme, J.E. Klemberg-Sapieha, “Design of new multifunctional galling-corrosion testing apparatus”, Proceedings of ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE2014), volume 14, ISBN: 978-0-7918-4963-7. Paper No. IMECE2014-39404, pp. V014T11A027; 7 pages, doi:10.1115/IMECE2014-39404

  10. E. Bousser, L. Martinu, J. Klemberg-Sapieha, "Multifunctional Protective Coatings for Aerospace Applications", AVS 61st International Symposium, American Vacuum Society, Baltimore, MD, Nov. 9-14, 2014 (invited).
     
  11. M. Azzi, E. Bitar-Nehme, J.E. Klemberg-Sapieha, "Desdign of new multifunctional galling-corrosion testing apparatus", Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition IMECE2014, Montreal, Canada, November 14-20, 2014.
     
  12. M. Azzi, L. Vernhes, E. Bousser, J.E. Klemberg-Sapieha, "Tribo-mechanical properties of CoCr and NiWCrB hardfacing superalloy coating systems", Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition IMECE2014, Montreal, Canada, November 14-20, 2014.
     
  13. L. Martinu, E. Bousser, T. Schmitt, T. Poirié and J.E. Klemberg-Sapieha, "Protective coatings for harsh environments: From understanding the deterioration mechanisms to multiscale solutions", 16th International Conference on Thin Films, Dubrovnik, October 13 – 16, 2014.
     
  14. J.E. Klemberg-Sapieha, and L. Martinu, "HiPIMS deposition of optical coatings: Lessons learned", Power Electronics for Plasma Engineering, Zielonka, Poland, May 20 – 22, 2014 (invited).
     
  15. M.-M. de Denus-Baillargeon, T. Schmitt, S. Larouche and L. Martinu, "Stress-Compensated Optical Coatings for Fabry-Perot Astronomical Applications" , SVC 57th Annual Technical Conference, Society of Vacuum Coaters, Chicago, Il, 2014.
  16. T. Schmitt, T. Poirié, E. Bousser, J.E. Klemberg-Sapieha, and L. Martinu, "In Situ Tools for the Mechanical Characterization of Optical Coatings", SVC 57th Annual Technical Conference, Society of Vacuum Coaters,Chicago, Il, 2014.

  17. J.C. Qian, Z.F. Zhou, K.Y. Li, W.J. Zhang, I. Bello, L. Martinu and J.E. Klemberg-Sapieha, "Mechanical and Tribological Properties of Boron-Containing Hard Protective Nanocomposite Coatings Deposited by Magnetron Sputtering", SVC 57th Annual Technical Conference, Society of Vacuum Coaters, Chicago, Il, 2014.

  18. I. Zukerman, A. Raveh, R.L. Boxman,J.K. Klemberg-Sapieha and L. Martinu, "Effect of Substrate Temperature and Bias Voltage on the Properties of Composite ZrO2-Al2O3 Coatings Deposited by Pulsed-DC Magnetron Sputtering", SVC 57th Annual Technical Conference, Society of Vacuum Coaters, Chicago, Il, 2014.

  19. S. Loquai, B. Baloukas, R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha and L. Martinu, "Effect of Pulse Parameters of the HiPIMS Discharge on the Thermochromic Properties of VO2 Films", SVC 57th Annual Technical Conference, Society of Vacuum Coaters, Chicago, Il, 2014.

  20. T. Schmitt, T. Poirié, E. Bousser, J.E. Klemberg-Sapieha, and L. Martinu, "Assessment of the Mechanical Properties of Optical Coatings by in situ Real-time Approaches", 41nd International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2014.

  21. S. Loquai, B. Baloukas, R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha and L. Martinu, "Low Temperature Deposition of Thermochromic VO2 Optical Coatings Using HiPIMS", 41nd International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2014.

  22. I. Zukerman, A. Raveh, R.L. Boxman,J.K. Klemberg-Sapieha and L. Martinu, "Properties of Composite ZrO2-Al2O3 Coatings Deposited by Pulsed-DC Magnetron Sputtering and Filtered Vacuum Arc Techniques", 41nd International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2014.

  23. M. Panjan, S. Loquai,J.E. Klemberg-Sapieha, and L. Martinu, "Imaging Of Self-Organized Plasma Structures In DC Magnetron Sputtering And HiPIMS Discharges", 41nd International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2014.

  24. E. Bousser, L. Vernhes, M. Azzi, J.E. Klemberg-Sapieha, "Properties of Hybrid Stellite/W(WC) and Colmonoy/W(WC) Coating Systems", 41nd International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2014.

  25. J. E. Klemberg-Sapieha, "Nanotructured protective coating systems for aerospace applications: From materials architecture to coating removal", IVC-19/ICSS-15, ICN+T 2013,  Paris, France, September 9-13, 2013 (invited).
  26.  M. Hala, R. Vernhes, J.-P. Fortier, B. Baloukas, O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu, "Passive and Active Optical Coatings Prepared by HiPIMS", OSA Optical Interference Coatings 2013 conference, Whistler, BC, Canada, June 2013.

  27. O. Zabeida, T. Schmitt, V. Marushka, T. Poirié, R. Vernhes, J. E. Klemberg-Sapieha, L. Martinu, "Hybrid Organic-Inorganic Optical Films Deposited by Ion Beam Assisted CVD", OSA Optical Interference Coatings 2013 conference, Whistler, BC, Canada, June 2013.

  28. B. Baloukas, W. Trottier-Lapointe, L. Martinu, "Interference-based Optical Security Devices: Past, Present and Future" OSA Optical Interference Coatings 2013 conference, Whistler, BC, Canada, June 2013 (invited).

  29. J. E. Klemberg-Sapieha, "Protective Coatings for Aerospace Applications: From Materials Architecture to Coating Removal", 40th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2013 (invited).

  30. M. Hala, R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Optical Coatings Prepared by HiPIMS – Does this Technology Meet our Expectations?", 40th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2013.

  31. J. Capek, M. Hala, R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Deposition Rate Enhancement in HiPIMS at Preserved Ionized Fraction of the Deposition Flux", 40th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2013.

  32. J. C. Qian, Z. F. Zhou, C. Yan, D. J. Li, M. Azzi, K. Y. Li, W. J. Zhang, I. Bello, L. Martinu, J.E. Klemberg-Sapieha, "Tailoring the Mechanical and Tribological Properties of Boron Carbide Films by Adjusting the BCx Stoichiometry", 40th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2013.

  33. E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "In-situ Real Time Solid Particle Erosion Testing Methodology for Hard Protective Coatings", 40th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Apr/May 2013.B. Baloukas and L. Martinu, "Fabry-Perot-Like Interference Filters for Anti-Counterfeiting Applications", 56 th SVC Technical Conference, Providence, RI, April 2013.

  34. E. Bousser, L. Martinu, and J.E. Klemberg-Sapieha, "Characterization and Understanding of the Solid Particle Erosion Mechanisms of Hard Coating Systems", 56 th SVC Technical Conference, Providence, RI, April 2013.

  35. J.-P. Fortier, B. Baloukas, M. Hala, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Enhanced Thermochromic Performance of VO2 Films Deposited by HiPIMS", 56 th SVC Technical Conference, Providence, RI, April 2013.

  36. M. Hála, R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Properties of Single-Layer and Multilayer Optical Coatings by HiPIMS", 56 th SVC Technical Conference, Providence, RI, April 2013.

  37. S. Loquai, J.-P. Fortier, M. Hala, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Oxygen Dynamics During Reactive HiPIMS Deposition of Thermochromic VO2 Films", 56 th SVC Technical Conference, Providence, RI, April 2013.

  38. T. Schmitt, O. Zabeida, R. Vernhes, V. Marushka, T. Poirié, J.E. Klemberg-Sapieha, L. Martinu, "Water absorption in optical coatings: toward more stable stacks", 56 th SVC Technical Conference, Providence, RI, April 2013.

  39. V. Marushka, O. Zabeida, T. Schmitt, R. Vernhes, J.E. Klemberg-Sapieha and L. Martinu, "Effect of ion bombardment characteristics of an end-Hall ion source on properties of optical films deposited by IAD", 56th SVC Technical Conference, Providence, RI, April 2013.

  40. M. Panjan, P. Panjan, M. Cekada, D. Kek-Merl, P. Gselman, J.E. Klemberg-Sapieha, L. Martinu, "Challenges of Depositing Tribological Coatings in Industrial and Pilot PVD Systems", 56th SVC Technical Conference, Providence, RI, April 2013.

  41. T. Poirié, N.M. Jennett, L.O. Marion-Ouellet, L. Martinu, J.E. Klemberg-Sapieha, "Determination of the mechanical properties from elastic recovery assessment of depth sensing indentation", 56th SVC Technical Conference, Providence, RI, April 2013.

  42. O. Zabeida, T. Poirié, R. Vernhes, J.E. Sapieha and L. Martinu, "Reversible water-induced stress evolution in nanoporous inorganic SiO2 and hybrid SiOCH films", SVC TechCon, Santa Clara, CA, April/May 2012.
  43. B. Baloukas, L. Martinu, "Electrochromic Interference Filters Based on WO3 and Composite SiO2/WO3 Films" SVC TechCon, Santa Clara, CA, April/May 2012.

  44. M. Panjan, M. Čekada, P. Panjan, M. Klanjšek Gunde, R. Vernhes, L. Martinu, "Tuning Colors in Protective Metal Nitride Coatings by the Control of Absorption/Interference Effects", SVC TechCon, Santa Clara, CA, April/May 2012.

  45. A. Ragusich, G. Taillon, M. Meunier, L. Martinu and J. E. Klemberg-Sapieha, "Pulsed laser ablation of reparable erosion-resistant coatings for aerospace", SVC Ann. Tech. Conf., Santa Clara, CA, 2012.

  46. B. Baloukas, J.-M. Lamarre, L. Martinu, "From Passive to Active: Future Optical Security Devices", Optical Interference Coatings, OSA Topical Conference, Tucson, Arizona, USA, June 6–11, 2010.

  47. M. Azzi, J.E. Klemberg-Sapieha, L. Martinu, "Role of wear-corrosion synergy in the degradation of hard protective coating systems" Society of Vacuum Coaters SVC, Orlando, April, 2010.

  48. R. Vernhes, O. Zabeida, R. Tietema, I. Kolev, J.E. Klemberg-Sapieha, L. Martinu, "Design and fabrication of red color coatings for decorative applications", Society of Vacuum Coaters SVC, Orlando, April, 2010.

  49. M. Hala, J. Capek, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Comparative Study of HIPIMS Discharges with Different Pulsing Characteristics Using Time-Resolved Electrical and Optical Diagnostics", Society of Vacuum Coaters SVC, Orlando, April, 2010.
     
  50. O. Zabeida, C. Archambault, and L. Martinu, "Thermo-Optical Properties of LSMO Films", Society of Vacuum Coaters SVC, Orlando, April, 2010.
     
  51. C. Hecquet, J.-M. Lamarre, N. Tueber, T. Poirie, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Mechanical and Optical Properties of Organosilicone Glass Films", SVC TechCon, Orlando, Fl, April 2010.
  52. M. Hala, N. Viau, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, „Analysis of Reactive HIPIMS Discharge Based on Time- and Space-Resolved Optical Emission Spectroscopy", Society of Vacuum Coaters SVC, Santa Clara, CA, USA, May, 2009.

  53. M. Azzi, M. Paquette, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu "Effect of Si incorporation on the mechanical and electrochemical properties of DLC films", Society of Vacuum Coaters SVC, Santa Clara, CA, USA, May, 2009.

  54. S. Guruvenket, D. Li, A. Raveh, J. Szpunar, L. Martinu, J.E. Klemberg-Sapieha, "Tribological properties of duplex treated 410 martensitic stainless steel" Proc. of the 51st Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Chicago, IL, USA, April, 2008.

  55. S. Hassani, J.E. Klemberg-Sapieha, M. Bielawski, W. Beres, L. Martinu, M. Balazinski, "Finite Element Modelling for the Design and Optimization of Erosion Resistant Coatings"Society of Vacuum Coaters SVC, Chicago, IL, USA, April, 2008.

  56. A. Raveh, M. Gelbstein, G. Moshe, M. Weiss, J.E. Klemberg-Sapieha, and L. Martinu "Wear-Corrosion Study of Tantalum-Oxide Layers Produced by Plasma Anodization Using Inductively cupled RF Plasma" Proc. of the 51st Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Chicago, IL, USA, April, 2008.

  57. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "SiN-Based Single Material Optical Filters Fabricated by Pulsed Plasma" Proc. of the 50th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Society of Vacuum Coaters, Louisville, KY, April 2007, pp. 124-128.

  58. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Properties, growth, and filter applications of a-SiNx:H alloys prepared in pulsed radiofrequency plasma", OSA Topical Meeting on Optical Interference Filters, Tucson, June 2007.

  59. L.Ç. Özcan, V. Tréanton, R. Kashyap and L. Martinu, "2D Refractive Index Measurement of CO2 Laser Written Planar Optical Waveguides", SPIE, 2006.

  60. S. Larouche, and L. Martinu, "A Needle-like Method for the Synthesis of Optical Filters with Arbitrary Indices", Proc. of the 49th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Washington, DC, April 2006.

  61. R. Snyders, O. Zabeida, K. I. Shingell, C. Roberge, L. Martinu, J.E. Klemberg-Sapieha, "Adhesion of hybrid poly (ethylene glycol) – soy protein hydrogels to plasma treated polymer surfaces", Proc. of the 49th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Washington, DC, April 2006.

  62. M.-M. de Denus-Baillargeon, L. Martinu and C. Carignan, "Comparison of graded-index and multilayer QW stack narrowband optical filters for astronomy", Proc. of the 49th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Washington, DC, April 2006.

  63. A. Amassian, P. Desjardins, L. Martinu, "In Situ Ellipsometry and Monte-Carlo Simulation Studies of the Role of Ion Bombardment in the Growth of Optical Films", Proc. of the 49th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Washington, DC, April 2006 (invited).

  64. B. Baloukas and L. Martinu, "Use of Metameric Filters for Future Interference Security Images Structures", SPIE, January 2006.

  65. O. Zabeida, M. Dudek, J.E. Klemberg-Sapieha, and L. Martinu, "Ion-induced Effects During Bias- and Plulse-controlled Reactive Sputtering of ITO Films", News Bulletin of the Society of Vacuum Coaters, Fall 2005, pp. 32-35.

  66. P. Jedrzejowski, A. Amassian, E. Bousser, L. Martinu, Klemberg-Sapieha, "Growth Study of TiN and Superhard Nanocomposite c-TiN/Si3N4 and c-TiCN/a-SiCN Coatings Using in situ Ellipsometry", Proc. of the 48th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Denver, April 2005.

  67. J.E. Klemberg-Sapieha, P. Jedrzejowski, L. Martinu, "Measurement of Superhard Coatings by Instrumented Nano-indentation - Progress Report on the International VAMAS Activity (TWA22)", Proc. of the 48th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Denver, April 2005.

  68. B. Baloukas and L. Martinu, "Playing with Light - The Quest for New Optically Vartiable Devices", Proc. of the 48th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Denver, April 2005.

  69. M. Dudek, O. Zabeida, J. E. Klemberg-Sapieha, and L. Martinu, "Ion-induced Effects during Reactive Sputtering of ITO Films", Proc. of the 48th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Denver, April 2005.

  70. A. Amassian, P. Desjardins, L. Martinu, "Influence of Low Ion Bombardment Energy on Interface Formation and Thin Film Growth in a Plasma-CVD Environment", Proc. of the 48th Ann. Tech. Conf. of the Society of Vacuum Coaters - SVC, Denver, April 2005.

  71. A. Amassian, R. Vernhes, J.E. Klemberg-Sapieha, P. Desjardins, and L. Martinu, "Study of the growth and interface engineering of dense/porous SiNx optical coatings by real-time spectroscopic ellipsometry", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, MF3-1-3.

  72. K. Kaminska, A. Amassian, L. Martinu, and K. Robbie, "Growth study of ultra-porous silicon for photonic interference filters", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, MF4-1-3.

  73. S. Larouche and L. Martinu, "A Simple Way to Include Dispersion in the Design of Graded-index Optical filters by Fourier Transform Method", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, TuB6-1-3.

  74. S. Larouche, A. Amassian, B. Baloukas, L. Martinu, "Turning-point monitoring is not simply optical thickness compensation", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27-July 2, 2004, TuE8-1-3.

  75. A. Amassian, P. Desjardins, and L. Martinu, "Dynamics of surface modifications during optical coating deposition in plasma-assisted processes", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, TuE9 -1-3.

  76. A. Amassian, R. Vernhes, J.E. Klemberg-Sapieha, L. Martinu Filters Using Porous-dense Silicon Nitride Stacks with Optimized Interfaces", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, ThD4-1-3.

  77. J.E. Klemberg-Sapieha and L. Martinu, "Mechanical Properties of Optical Coatings", Optical Interference Coatings (OIC) Topical Meeting, OSA Technical Digest Ser., Optical Society of America, Tucson, AZ, June 27 - July 2, 2004, ThE1-1-3 (invited).

  78. A. Amassian, R. Vernhes, J. E. Klemberg-Sapieha, P. Desjardins, and L. Martinu "Optical thin films based on porous/dense multilayers of silicon nitride: In situ real time spectroscopic ellipsometry study", Proc. of the 43rd Ann. Tech. Conf. of the Society of Vacuum Coaters, SVC, Dallas, May 2004.

  79. J.-M. Lamarre, L. Martinu, Z. Yu, C. Harkati and S. Roorda, "Optical Response from Metal / Dielectric Nanocomposite Thin Films Systems Modified by Heavy Ion Irradiation", Proc. of the 43rd Ann. Tech. Conf. of the Society of Vacuum Coaters, SVC, Dallas, May 2004.

  80. P. Jedrzejowski, B. Baloukas, J.-P. Masse, J.E. Klemberg-Sapieha, and L. Martinu, "Properties of Nanocomposite TiN/SiN1.3 Coatings Produced by PECVD", Proc. 16th Int. Conf. Plasma Chemistry, ISPC-16, Taormina, Italy, June 2003.

  81. P. Jedrzejowski, J. Cizek, A. Amassian, J.E. Klemberg-Sapieha, J. Vlcek, and L. Martinu, "Mechanical Properties of Hard SiCN Coatings Prepared by PECVD", Proc. of the 42nd Ann. Tech. Conf. of the Society of Vacuum Coaters, SVC, San Francisco, May 2003.

  82. S. Larouche, H. Szymanowski, A. Amassian, J.E. Klemberg-Sapieha, and L. Martinu, "Microstructure of SiO2/TiO2Coatings and Their Use in Inhomogeneous Optical Filters, Proc. of the 42nd Ann. Tech. Conf. of the Society of Vacuum Coaters, SVC, San Francisco, May 2003.

  83. L. Martinu, "Plasma Processing of Thin Films for Optics and Photonics", Proc. Ann. Tech. Conf. Jap. Eng., Sendai, March 2003., (invited).

  84. S Larouche, A. Amassian, J.E. Klemberg-Sapieha and L. Martinu, "Plasma Deposited Inhamogeneous Optical Filters", SPIE Regional Meeting on Optoelectronics, Photonies and Imaging, SPIE Vol. TD01 (2002), Ottawa, August 2002, pp. 493-495.

  85. A. Amassian, S. Larouche, R. Vernhes, J.E. Klemberg-Sapieha, P. Desjardins and L. Martinu, "Analysis and Control of Optical Film Growth by In Situ Real Time Spetroscopie Ellipsometry", Proc. Opto-Canada, SPIE Regional Meeting on Optoelectronics, Photonics and Imaging, SPIE Vol. TD01 (2002), Ottawa, August 2002, p.p. 493-495.

  86. A. Amassian, S. Larouche, J.E. Klemberg-Sapieha, P. Desjardins and L. Martinu, "In Situ Ellipsmetric Study of the Initial Growth Stages of a-TiO2 by PECVD", Proc. of the 41st Ann. Tech. Conf. of the Society of Vacuum Coaters, Orlando, April 2002.

  87. O. Zabeida, A. Amassian, S. Larouche, C. Lavigne, J.E. Klemberg-Sapieha, L. Martinu, D.E. Morton, I.C. Stevenson, and F. Zimone, "Plasma Deposition of Anti-reflective Coatings on Spherical Lenses", Optical Interference Coatings, OSA Technical Digest Ser., Optical Society of America, Washington, DC, 2001, WA7-1-3.

  88. L. Martinu and J.E. Klemberg-Sapieha, "Optical Coatings on Plastics: The Effect of Interphase on the Optical and Mechanical Properties", Optical Interference Coatings, OSA Technical Digest Ser., Optical Society of America, Washington, DC, 2001, MF7-1-3 (invited).

  89. D. Poitras and L. Martinu, "Admittance Diagrams of Accidental and Premeditated Inhomogeneous Optical Coatings", Optical Interference Coatings, OSA Technical Digest Ser., Optical Society of America, Washington, DC, 2001, TuA3-1-3.

  90. D. Poitras, S. Larouche, and L. Martinu, « Design and Plasma Deposition of Dispersion-Corrected Multiband Rugate Filters », Optical Interference Coatings, OSA Technical Digest Ser., Optical Society of America, Washington, DC, 2001, MB7-1-3.

  91. P. Spatenka, J. Hong, J. Pavel, M. Sery, L. Martinu, and M.R. Wertheimer, "Electron Density and Electron Energy Distribution Functions in Dual-mode Microwave/radio Frequency Plasmas in Argon and Nitrogen", Proc. 15th Int. Symp. Plasma Chemistry, ISPC-15, Orleans, France, July 2001, 653-663.

  92. A. Lefèvre, L.J. Lewis, L. Martinu, and M.R. Wertheimer, "Structural and Vibrational Properties of Silicon Dioxide Thin Films Densified by Medium-Energy Particle Bombardment", Proc. MRS Symposium, San Francisco, March 2001.

  93. A. Sadough-Vanini, D.-Q. Yang, L. Martinu, and E. Sacher, "The Adhesion of Deposited Copper to Dow Cyclotene 3022, as Determined by Microscratch Testing", Proc. 24th Annu. Mtg. Adhesion Society, Adhesion Society, Blacksbury, Va, 2001, pp. 99-100.

  94. M.-A. Raymond, S. Larouche, O. Zabeida, L. Martinu, and J.E. Klemberg-Sapieha, "Tribological Properties of PECVD Optical Coatings" Proc 44th Ann. Tech. Conf. Society of Vacuum Coaters, Philadelphia, April 2001.

  95. S. Larouche, A. Amassian, S.C. Gujrathi, J.E. Klemberg-Sapieha, and L. Martinu, "Multilayer and inhomogeneous Optical Filters fabricated by PECVD using Titanium Dioxide and Silicon Dioxide", Proc 44th Ann. Tech. Conf. Society of Vacuum Coaters, Philadelphia, April 2001.

  96. J.E. Klemberg-Sapieha, S. Dahl, and L. Martinu, "Micromechanical Properties of Optical Coatings", Proc. of the Annual Technical Conference of the Society of Vacuum Coaters, Denver, April 2000, 234-238.

  97. L. Martinu, M. Latrèche, V. Hajek, J.E. Klemberg-Sapieha, A. Argoitia, and P. Beachamp "Search for High Index PECVD Optical Coating Materials: The Case of Titanium Dioxide", Proc. of the Annual Technical Conference of the Society of Vacuum Coaters, Denver, April 2000, 177-180.

  98. O. Zabeida, A. Hallil, J.E. Klemberg-Sapieha, M.R. Wertheimer, and L. Martinu, "Ion Energy Distributions in Pulsed Microwave and Dual-Mode Microwave/Radio-frequency Plasmas", Proc. 14th Int. Symp. on Plasma Chemistry (ISPC-14), Prague, 1999, Vol. I, pp. 169-170.

  99. M.R. Wertheimer, L. Martinu, J.E. Klemberg-Sapieha, "Plasma Treatment of Polymers to Improve Adhesion of Metals and Dielectrics", Proc. ISPC-14, Prague, August 1999, Vol V, pp. 2765-2767.

  100. O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu and D. Morton, "Study of Ion Bombardment Effects on Optical Films and Polymer Surfaces Using a Cold Cathode Ion Source", Proc. 42nd Ann. Tech. Conf., Society of Vacuum Coaters, Chicago, April 1999, pp. 267-272.

  101. A. Hallil, O. Zabeida, J. E. Klemberg-Sapieha, M. R. Wertheimer, and L. Martinu, "Mass-Resolved Ion Energy Distributions in Dual-Mode Microwave/Radiofrequency Plasma for Materials Processing", Proc. 42nd Ann. Tech. Conf., Society of Vacuum Coaters, Chicago, April 1999, pp. 311-315.

  102. L. Martinu, M.R. Wertheimer, and J.E. Klemberg-Sapieha, "Recent Advances in Plasma Deposition of Functional Coatings on Polymers", "in Plasma Deposition and Treatment of Polymers", MRS Proc. Vol. 544, Warrendale, PA, 1999, pp. 251-256 (invited).

  103. O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, and D. Morton, "Effect of Ion Bombardment in Polymer Surface Modification: Comparison of Pulsed High Frequency Plasma and Ion Beam", in Plasma Deposition and Treatment of Polymers", MRS Proc. Vol. 544, Warrendale, PA, 1999, pp. 233-238.

  104. D. Dalacu, A.P. Brown, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, S.I. Najafi, and M.A. Andrews, "Characterization of Plasma-deposited Au/Fluoropolymer Nanocomposite Films for Nonlinear Optical Applications", in "Plasma Deposition and Treatment of Polymers", MRS Proc. Vol. 544, Warrendale, PA, 1999, pp. 167-172.

  105. J.E. Klemberg-Sapieha, L. Martinu, N.L.S. Yamasaki, and C. W. Lantman, "Plasma-induced Stabilization of PMMA Surfaces for Enhanced Adhesion of Plasma-deposited Coatings", in Plasma Deposition and Treatment of Polymers", MRS Proc. Vol. 544, Warrendale, PA, 1999, pp. 277-281.

  106. W. Künstler, P. Frübing, R. Gerhard-Multhaupt, J. Cerny, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, A. Holländer and J. Behnisch, "Surface-Charging Behavior of Plasma-Treated Polymer Films", Proc. CEIDP, Atlanta, October 1998, 609-612.

  107. R. Kressmann, H. Amjadi, G.M. Sessler, D. Rats, L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Charge Storage in PECVD Silicon Oxynitride Layers", Proc. CEIDP, Atlanta, October 1998, IEEE, 605-608.

  108. L. Martinu, "Advances in Plasma Deposition of Optical Films and Coatings", Proc. 41st Ann. Tech. Conf., Society of Vacuum Coaters, Boston, April 1998, 111-114, (invited).

  109. A. da Silva Sobrinho, A. Bergeron, N. Schühler, J.E. Klemberg-Sapieha, L. Martinu, M. Andrews, and M.R. Wertheimer, "Interphase Characterization of Silicon-Based Barrier Layers on PET", Proc. 41st Ann. Techn. Conf., Society of Vacuum Coaters, Boston, April 1998, 115-120.

  110. J.E. Klemberg-Sapieha, L. Martinu, V. Fridman, and D.E. Morton, "Characterization of Hydrophobic Thin Films Prepared Using a Cold Cathode Ion Source", Proc. 41st Ann. Techn. Conf., Society of Vacuum Coaters, Boston, April 1998, 138-143.

  111. O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Effect of Pulse Mode on the Plasma Characteristics and on the Treatment of Polymers", 41st Proc. Ann. Tech. Conf., Society of Vacuum Coaters, Boston, April 1998, 336-341.

  112. A. Bergeron, D. Poitras and L. Martinu, "Effect of Interphase on the Properties of Optical Filters Fabricated by PECVD on Polycarbonate", Optical Interference Coatings, Vol. 9, OSA Technical Digest Series, Opt. Soc. Ann., Washington DC, 1998, p. 193-195.

  113. D. Dalacu and L. Martinu, "Ellipsometric Characterization of Low Pressure Plasma Deposited Au/Fluoropolymer Nanocomposite Films", Optical Interference Coatings, Vol. 9, OSA Technical Digest Series, Optical Society of America, Washington, DC, 1998, p. 199-201.

  114. D. Popovici, J.E. Klemberg-Sapieha, G. Czeremuszkin, A. Alptekin, L. Martinu, M. Meunier, and E. Sacher, "The Deposition of Copper onto Teflon AF1600: An XPS Metallized Plastics Comparison of Vapor Deposition and Sputtering", K. Mittal ed., Plenum, New York, 1998.

  115. A. Alptekin, E. Sacher, G. Czeremuszkin, L. Martinu and M. DiRenzo, "Dielectric and Mechanical Properties of Copper/Fluoropolymer Film Structures", Electrochem. Soc. Proc., 97-8 (1998) 58-66.

  116. G. Czeremuszkin, L. Martinu, A. Alptekin, D. Popovici and E. Sacher, "Thermal Stability of Low-Permittivity Fluoropolymer Dielectrics", The Electrochem. Soc., Pennington, NJ, Proc. Vol. 97-8 (1998) 73.

  117. H. Biederman, V. Stundzia, D. Slavinska, P. Bilkova, J. Pesicka, P. Hlidek, J. Zemek, L. Martinu, and S.C. Gujrathi, "Unbalanced Magnetron Deposition of Composite Metal/C:H films -a Comparison of Basic Properties of Ag/C:H, Ni/C:H and Mo/C:H"; Proc. Int. Symp. Plasma Chem., ISPC-13, Beijin, August, Proc. Vol. III, Peking University Press, Beijing 1997, pp. 1165-1170.

  118. M.R. Wertheimer G. Czeremuszkin, J. Cerny, J.E. Klemberg-Sapieha, L. Martinu and W. Kremers, "Plasma-deposited Coatings and Surface Fluorination for Protection of Spacecraft Materials against Atomic Oxygen Erosion", Proc. 7th Int. Symp. on Materials in a Space Environment, Toulouse, France, June 1997, ESA Publications, SP-399, Noordwijk NL, pp. 393-402.

  119. L. Martinu, "Low Pressure Plasma Processing for Optoelectronics Applications", SPIE-Vol. 2695 (1996) 30-37 (invited).

  120. A. Malek-Tabrizi, S.I. Najafi and L. Martinu, "Glass Integrated Optics Symmetric and Nonsymmetric Mach-Zehnder Interferometer Sensors", SPIE Vol. 2695 (1996) 180-187.

  121. S. Vallon, A. Hofrichter, B. Drévillon, J.E. Klemberg-Sapieha, L. Martinu, F. Poncin-Epaillard, A. Schalchli and J.J. Benattar, "Adhesion Improvement of Silica Layers on Polypropylene and Polycarbonate Induced by Plasma Treatments", 8ième Journée sur l'Adhérence, Société Française de l'Adhésion, LeVide, octobre 1995.

  122. N. Bertrand, B. Drévillon, J.E. Klemberg-Sapieha, and L. Martinu, "Amélioration par traitement plasma de l'adhésion de films minces à base de silicium sur substrat d'acier inoxydable", 8ième journée sur l'Adhérence (Société Française de l'Adhésion), Le Vide, Octobre 1995.

  123. M.K. Shi, J.E. Klemberg-Sapieha, G. Czeremuszkin, L. Martinu and E. Sacher, "Adhesion of Copper to Plasma-Treated Fluoropolymers", Proc. 12th Int. Symp. on Plasma Chemistry-ISPC-12, J. Heberlein, ed., Minneapolis, MN, 1995, pp. 51-56.

  124. P. Reinke, O. Zabeida, B. Andreani, S. Bureau and L. Martinu, "Ion Energy Distribution Functions in Microwave and Radio Frequency Plasmas", Proc. 12th Int. Symp. on Plasma Chemistry - ISPC-12, J. Heberlein, ed., Minneapolis, MN, 1995, pp. 499-504.

  125. R. Berriche, P. Leroux and L. Martinu, "Evaluation of the Adhesion of Si3N4 and SiO2 Thin Films to Si by the Scratch Method", Proc. Int. Symp. on Advanced Ceramics for Structural and Tribological Applications, 34th Ann. Conf. of Metallurgists of CIM, Vancouver, August 1995.

  126. J.E. Klemberg-Sapieha, M.K. Shi, L. Martinu and M.R. Wertheimer, "Effect of Plasma Treatment on Teflon PFA-Cu Adhesion", Proc. 11th Int. Coll. on Plasma Processes, CIP '95, Antibes, France, June 1995, Société Française du Vide, Paris.

  127. C.F.M. Borges, S. Schelz, L. Martinu and M. Moisan, "Effect of Silicon Substrate Orientation on the Nucleation and Adhesion of CVD Diamond Films", Diamond Materials IV, K.V. Ravi and P.J. Dismukes, eds., The Electrochemical Society Proc. Vol. 95-4, Pennington 1995, 136-141.

  128. J.E. Klemberg-Sapieha, M.K. Shi, L. Martinu and M.R. Wertheimer, "Surface Enhancement of Polymers by Low Pressure Plasma Treatments", Proc. SPE AnTec '95, Boston, MA, May 1995.

  129. E.P. Calius, J. Cerny, J.E. Klemberg-Sapieha, W. Kremers, S. Leclerc, L. Martinu, C. Saunders, and M.R. Wertheimer, "Plasma-Deposited Coatings and Surface Fluorination for Protection of Spacecraft Materials against Atomic Oxygen Erosion", Proc. 8th Can. Aeronautics and Space Inst. (CASI), CASI Conf. on Astronautics, Ottawa, November 1994 (invited).

  130. S. Bauer-Gogonea, S. Bauer, W. Wirges, R. Gerhard-Multhaupt, J.E. Klemberg-Sapieha, L. Martinu, and M.R. Wertheimer, "In-situ Pyroelectrical Study of the Polarization Dynamics in Nonlinear Optical Polymers and Physics Chemical Investigation of Photo-induced Degradation", Proc. 8th Int. Symp. on Electrets (ISE-8), Paris, September 1994.

  131. P. Günther, C. Thielemann, J.E. Klemberg-Sapieha, L. Martinu, and M.R. Wertheimer, "Cold Plasma-deposited SiO2 and Amorphous Teflon AF as Electret-Coatings for MIS-IL Solar Cells", Proc. 8th Int. Symp. on Electrets (ISE-8), Paris, September 1994.

  132. H. Amjadi, C. Thielemann, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Miniaturized Inorganic Electret Layers", Proc. 8th Int. Symp. on Electrets (ISE-8), Paris, September 1994.

  133. L. Martinu, J.E. Klemberg-Sapieha, and M.R. Wertheimer, "Dual-Frequency Plasma Deposition of High-Quality Insulating Thin Films", Proc. 4th Int. Conf. on Props. and Appl. of Diel. Mater., Brisbane, Australia, July 1994, Paper No. 4115, pp. 227-230.

  134. A. Raveh, H.M. Hawthorne, L. Martinu, P. Leroux and M.R. Wertheimer, "Mechanical Properties of Diamond-like Carbon Films", The 25th Israel Conf. on Mech. Eng., Haifa, Israel, May 1994, pp. 124-127.

  135. D. Poitras, P. Leroux, J.E. Klemberg-Sapieha, S.C. Gujrathi and L. Martinu, "Characterization of Silicon-Compound Multilayer and Graded-Index Optical Coatings Deposited by Dual-Frequency Plasma, Proc. 37th Ann. Tech. Conf., Soc. Vacuum Coaters, Boston, May 1994, 31-36.

  136. L.R. Schmidt, J. Francoeur, A. Agüero, M.R. Wertheimer, J.E. Klemberg-Sapieha, L. Martinu, J.W. Blezius, M. Olivier, and A. Singh, "The Strategic Technologies for Automation and Robotics (STEAR) Program-Protection of Materials in the Space Environment Subprogram", NASA-Meleo 1994.

  137. W. Wirges, S. Bauer-Gogonea, S. Bauer, R. Gerhard-Multhaupt, L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Plasma-Deposited Fluorocarbon Coatings for Passive and Active Integrated Optical Devices", SPIE, Vol. 2213 (1994) 303-310.

  138. C. Thielemann, P. Guenther, R. Schellin, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Films with Electret Properties for Condenser Microphones" (in German), Proc. DAGA'94 (German Acoustic Society), Dresden, March 1994.

  139. J.E. Klemberg-Sapieha, L. Martinu, A. Raveh, and M.R. Wertheimer, "Dual-Frequency Plasma Deposition of Hard Materials: Si-Compounds and DLC", Proc. 9th Int. Coll. on Plasma Processes, CIP'93, Antibes, June 1993, Société Française du Vide, Paris, pp. 151-153.

  140. D. Poitras, J.E. Klemberg-Sapieha, A. Moussi and L. Martinu, "Properties of Multilayer and Graded Index Si-based Coatings Deposited in Dual-Frequency Plasma", Proc. of the Conf. on Inhomogeneous and Quasi-inhomogeneous Optical Coatings, SPIE's Int. Symp. Optics Québec'93, SPIE Vol. 2046, pp. 179-188.

  141. P. Reinke, A. Raveh, J.E. Klemberg-Sapieha and L. Martinu, "Modification of Interfaces in the Growth of Diamond by MW/RF Plasma", Proc. 11th Int. Symp. Plasma Chem. (ISPC-11)(J. Harry, ed.) Loughborough, August 22-27, 1993, IUPAC, pp. 1632-1637.

  142. P. Leroux, A. Raveh, J.E. Klemberg-Sapieha and L. Martinu, "Mechanical Properties of Plasma Deposited Functional Coatings Determined by Microscratch Measurements, Proc. 36th Ann. Tech. Conf., Soc. Vacuum Coaters, Dallas, TX, April 1993, 472-477.

  143. J.E. Klemberg-Sapieha, L. Martinu, O.M. Küttel and M.R. Wertheimer, "Transparent Gas Barrier Coatings Produced by Dual-Frequency PECVD", Proc. 36th Ann. Tech. Conf. Soc. Vacuum Coaters, Dallas, TX, April 1993, 445-449.

  144. A. Raveh, L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Diamond-Like Carbon Films: Preparation, Microstructure-Property Relationship", Proc. 6th Israeli Materials Engineering Conf., February 24-25, 1993.

  145. A. Raveh, R. Avni, A. Grill, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "The Effect of Frequency in Plasma Materials Processing", Proc. 6th Israeli Materials Engineering Conf., February 24-25, 1993.

  146. E. Poiré, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, S. Liang, S.S. Barton, and J.A. MacDonald, "Modification of Active Carbon by Hydrophobic Plasma Polymers", Proc. ACS, Denver, March 1993.

  147. P. Guenther, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Charge Storage in Plasma Deposited Thin Films", Proc. IEEE CEIDP, 1992, IEEE Doc. 92CH3123-7, 67-73.

  148. J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Materials Processing in Dual-Mode Microwave/Radio Frequency Plasmas", 18th Int. Symp. on Rarefied Gas Dynamics, Vancouver, July 26-31, 1992.

  149. L. Martinu and M.R. Wertheimer, "Ion Assisted Low Plasma Processing: Status, Future and the Dual Microwave-Radio Frequency Approach, 9th Symp. Elementary and Chem. Reactions in Low Temp. Plasma, Casta (Czechoslovakia), September 7-11, 1992.

  150. R.C. Tennyson, W.D. Morison, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer and D.G. Zimcik, "Evaluation of Plasma Deposited Protective Coatings for Spacecraft Applications", AIAA-92-2152, Materials Specialist Conference - Coating Technology for Aerospace Systems, Dallas, April 16-17, 1992, pp. 11-20.

  151. L. Martinu, J.E. Klemberg-Sapieha, H.P. Schreiber and M.R. Wertheimer, "Modification of Interfaces by Cold Plasmas: Control of Adhesion", 6ième Journée d'Étude sur l'Adhérence, Presqu'île de Giens, France, 7-11 octobre 1991, dans: Le Vide, Les Couches Minces - Supplément au no. 258 (1991), 13-25.

  152. A. Raveh, L. Martinu, A. Domingue, M.R. Wertheimer and L. Bertrand, "Fourier Transform Infrared Photoacoustic Spectroscopy Characteristics of Carbon Films", Proc. 7th Int. Topical Meeting on Photoacoustic and Photothermal Phenomena, Doorwerth, Netherlands, August 1991, pp. 387-388.

  153. D. Poitras, O.M. Küttel, A. Raveh, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Comparison of Processes in Radio-and Microwave Frequency Plasmas by Optical Emission Spectroscopy", Proc. 10th Int. Symp. Plasma Chem., U. Ehlemann, H.G. Lergon and K. Wiesemann, eds., Bochum (Germany), August 4-9, 1991, Vol. 2.1, 46, pp.1-6.

  154. J.E. Klemberg-Sapieha, L. Martinu, E. Sacher and M.R. Wertheimer, "Chemical Structure of Plasma Nitrided Polymer Surfaces", Proc. 10th Int. Symp. Plasma Chem., U. Ehlemann, H.G. Lergon, and K. Wiesemann, eds., Bochum (Germany), August 4-9, Vol. 2, paper 2.2-40.

  155. J.E. Klemberg-Sapieha, L. Martinu, E. Sacher and M.R. Wertheimer, "Plasma-Surface Interactions in the Treatment of Polymers", Proc. SPE Annual Tech. Conf.-ANTEC'91, Montreal, May 6-10, 1991, pp. 1093-1095.

  156. L. Martinu, O.M. Küttel, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Processes in Dual-Mode Microwave/Radio Frequency Plasmas, in" Proc. 8th Symposium on Plasma Processing", D. Hess and G.S. Mathad, eds., Vol. 90-14, The Electrochemical Society, Pennington 1990, 616-627.

  157. L. Martinu, A.-M. Castelli and C. Bastioli, "Electrical Behaviour of PET-Matrix Composites", Proc. 1990 IEEE CEIDP, Pocono Manor, October 1990, 172-177.

  158. A. Lian, L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Electrical Properties of Silicon Oxide/Polyimide Double-Layer Structures", Proc. 1990 IEEE CEIDP, Pocono Manor, October 1990, 159-165.

  159. L. Martinu, J.E. Klemberg-Sapieha, O.M. Küttel and M.R. Wertheimer, "Electrical Properties of Dual-Frequency Plasma Deposited Silicon-Compound Films", Proc. 1990 IEEE CEIDP, Pocono Manor, October 1990, 178-183.

  160. J.E. Klemberg-Sapieha, L. Martinu, O.M. Küttel and M.R. Wertheimer, "Modification of Polymer Surfaces by Dual-Frequency Plasmas, Proc. 2nd Symp. on Metallized Plastics: Fundamental and Applied Aspects, the Electrochemical Society, Montreal, May 1990, (invited paper) in "Metallized Plastics II, J.R. Susko and L.K. Mittal, eds., Plenum, New York 1992, pp. 315-329.

  161. J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Dual-Mode-Frequency N2 and NH3 Plasma Modification of Polymer Surfaces, ACS Symp. on Plasma Polymerization and Plasma Interactions with Polymeric Materials, April 1990, Boston MA Proc. ACS/PMSE, Vol. 62, pp. 433-436 (1990).

  162. L. Martinu, V. Pische and R. d'Agostino, "Surface Modification by Plasma Deposition of Metal-Filled Polymers", in: "Metallization in Polymers", E. Sacher, J.J. Pireaux, and S.P. Kowalczyk, eds., ACS Symp. Ser. 440, Washington DC 1990, 170-178.

  163. M.H. Bernier, J.E. Klemberg-Sapieha, L. Martinu and M.R. Wertheimer, "Polymer Surface Modification by Dual-Frequency Plasma Treatment", in: Metallization in Polymers", E. Sacher, J.J. Pireaux, and S.P. Kowalczyk, eds., ACS Symp. Ser. 440, Washington DC, 1990, 147-160.

  164. D.G. Zimcik, L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Protective Coatings for Spacecraft Applications", Proc. 17th Int. Symp. Space Technol. Sci., Tokyo, May 1990, 461-468.

  165. V. Pische, L. Martinu and R. d'Agostino, "The Effect of Bias and Temperature on the Deposition of Au-containing Plasma Polymerized Fluoroethane", Proc. 9th Int. Symp. Plasma Chem., Pugnochiuso (Italy), September 4-8, 1989, 1201-1206.

  166. L. Martinu, V. Pische and R. d'Agostino, "Plasma-Surface Interactions Effects in the Growth of Metal-Filled Plasma Polymers", Proc. 9th Int. Symp. Plasma Chem., Pugnochiuso (Italy), September 4-8, 1989, 1642-1647.

  167. L. Martinu, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Deposition of Semiconducting and Dielectric Films in "Dual-"and "Single-Mode" Microwave or Radio Frequency Plasmas", Proc. 9th Int. Symp. Plasma Chem., Pugnochiuso (Italy), September 4-8, 1989, 1341-1346.

  168. H. Biederman, Hong jon Chjok, L. Martinu, J. David, S. Kadlec and P. Lukac, "Basic Physical Properties of Composite Metal/Hard Carbon Films", Proc. E-MRS Conf. Vol. 17, Strasbourg, June 2-5, 1987, Les Editions de Physique, Paris, 1987, 499-503.

  169. H. Biederman, L. Martinu, D. Slavinska, and I. Chudacek, "Plasma Deposition and Properties of Composite Metal/Polymer and Metal/Hard Carbon Films", Proc. 8th Int. Symp. Plasma Chem. (ISPC-8), K. Akashi and A. Kinbara, eds., Tokyo, September 1-4, 1987, 1299-1304, (invited).

  170. H. Biederman, L. Martinu and S. Nespurek, "Aging Effects in Composite Plasma Polymer/Metal Films", Proc. 8th Int. Symp. Plasma Chem. (ISPC-8), Tokyo, September 1-4, 1987, 1364-1367.

  171. L. Eckertova and L. Martinu, "Surface Analysis of Plasma Deposited and Plasma-Treated Materials", 7th Symp. on Elementary Processes and Chem. Reactions in Low Temp. Plasma, Jelsava (Czechoslovakia), Slovak Academy of Sciences, P. Lukac, ed., June 9-13, 1986, 41-58, (invited paper).

  172. L. Martinu and H. Biederman, "Deposition of Composite Polymer-Metal Films in an RF Glow Discharge", Proc. 7th Int. Symp. Plasma Chem. (ISPC-7), Eindhoven, July 1985, 1313-1318.

Chapitres de livres

24. K. Sarakinos, L. Martinu,"Synthesis of thin films and coatings by high power impulse magnetron sputtering", in "High Power Impulse Magnetron Sputtering", Editors: D.Lundin, T. Minea, J. T. Gudmundsson, Elsevier, 2020, pp. 333-374

23. Tjhay W. Boentoro, Bernd Szyszka, Ludvik Martinu, "Protective coatings for durability enhancement of optical surfaces" in "Optical Thin Films and Coatings: From Materials to Applications", 2nd ed., Editors: A. Piegari and F. Flory, Woodhead Publishing Ltd. UK, 2018 (1st ed., 2013) pp. 539-564 .

22. B. Baloukas, L. Martinu, "Optical coatings for security and authentication devices" in "Optical Thin Films and Coatings: From Materials to Applications", 2nd ed., Editors: A. Piegari and F. Flory, Woodhead Publishing Ltd. UK, 2018 (1st ed., 2013) pp. 633-666 .

21. Azzi M., Klemberg-Sapieha J.E.,  "Tribocorrosion test protocols for sliding contacts", in "Tribocorrosion of Passive Metals and Coatings", Editors: D. Landolt and S. Mischler. Woodhead Publishing Ltd, UK, 2011.
 

20. L. Martinu, O. Zabeida and J.E. Klemberg-Sapieha, "Plasma-Enhanced Chemical Vapor Deposition of Functional Coatings", Chapter 9 in the "Handbook of Thin Film Deposition Technologies for films and coatings", P.M. Martin, ed., Elsevier, Amsterdam, 2010, pp. 394-467.
 

19. L. Martinu, B. Hichwa, J.E. Klemberg-Sapieha, "Advances in Optical Coatings Stimulated by the Development of Deposition Techniques and the Control of Ion Bombardment", Chapter 14 in the 50th Anniversary Book of the Society of Vacuum Coaters, Albuquerque, NM, 2007, pp. 56-69.
 

18. L. Martinu and J.E. Klemberg-Sapieha, “Optical Coatings on Plastics”, in "Optical Interference Coatings", N. Kaiser and H.K. Pulker, eds., Springer, Berlin 2003, pp. 359-391.
 

17. D. Dalacu and L. Martinu, Ellipsometric Characterization of the Optical Constants of Metals: Thin Film Versus Nanoparticle, in "Metallization of Polymers 2", E. Sacher, ed., Springer-Science, New-York 2002, pp. 11-22.
 

16. G. Czeremuszkin, M.R. Wertheimer, J. Cerny, J.E. Klemberg-Sapieha and L. Martinu, "Plasma Deposited Coatings for the Protection of Spacecraft Materials against Atomic Oxygen Erosion", in “Protection of Materials and Structures from Low Earth Orbit Space Environment” J.I. Kleiman and R.C. Tennyson, eds.,  Kluwer Academic Publishers, Dordrecht, 1999, pp. 139-153.
 

15. M.R. Wertheimer, L. Martinu, J.E. Klemberg-Sapieha and G. Czeremuszkin, "Plasma Treatment of Polymers to Improve Adhesion", in "Adhesion Promotion Techniques", K.L. Mittal and A. Pizzi, eds., Marcel Dekker, New York 1999, pp. 139-173.
 

14. L. Martinu, "Plasma Deposition and Testing of Hard Coatings on Plastics", in "Plasma Processing of Polymers", R. d'Agostino, ed., Kluwer Academic Publishers, Dordrecht, 1997, pp. 247-272.
 

13. J.E. Klemberg-Sapieha, "Scanning Probe Microscopy on Polymer Surfaces", in "Plasma Processing of Polymers", R. d'Agostino, ed., Kluwer Academic Publishers, Dordrecht, 1997, 233-245.
 

12. M.R. Wertheimer, L. Martinu, and M. Moisan, "Microwave and Dual-Frequency Plasma Processing", in "Plasma Processing of Polymers", R. d'Agostino, ed., Kluwer Academic Publishers, Dordrecht, 1997 pp. 101-127.
 

11. M.R. Wertheimer, L. Martinu and E.M. Liston, "Plasma Sources for Polymer Surface Treatment", in "Handbook of Thin Film Process Technology", D.A. Glocker, S.I. Shah, W.D. Westwood, eds, IOP Publishing Ltd., Bristol 1996, pp. E 3.0:1-38.
 

10. E.M. Liston, L. Martinu and W.R. Wertheimer, "Plasma Surface Modification of Polymers for Improved Adhesion:  A Critical Review", in "Plasma Surface Modification of Polymers: Relevance to Adhesion", M. Strobel, C.S. Lyons and K.L. Mittal, eds., VSP, Zeist (Netherlands), 1994, pp. 1-12.
 

9.  L. Martinu and M.R. Wertheimer, "Ion Assisted Thin Film Growth in Dual Microwave/Radio Frequency Plasmas", in "Plasma Properties, Deposition and Etching", J. Pouch and S.A. Alterovitz, eds., Trans. Tech. Publications, Aedermannsdorf (Switzerland) 1994, pp. 405-420.
 

 8. J.E. Klemberg-Sapieha, L. Martinu, S. Sapieha and M.R. Wertheimer, "Control and Modification of Surfaces and Interfaces by Corona and Low Pressure Plasma", in "The Interfacial Interactions in Polymeric Composites", G. Akovali, ed., NATO-ASI, Series E:  Applied Sciences - Vol. 230.  Kluwer Press, Dordrecht, 1993, 201-222.
 

 7. M.R. Wertheimer and L. Martinu, "Ion Bombardment Effects in Dual Microwave/Radio Frequency Plasmas", in "Microwave Discharges:  Fundamentals and Applications", C.M. Ferreira and M. Moisan, eds., NATO-ASI, Series B:  Physics Vol. 302, Plenum, New York 1993, pp. 465-480.
 

 6. L. Martinu, "Aging of diamond‑like carbon and carbon/metal films", in "Diamond and Diamond‑like Films and Coatings", J.C. Angus, R.E. Clausing, L.L. Horton, P. Koidl, eds., NATO-ASI Ser. B:  Physics, Vol. 266, Plenum, New York 1991, pp. 467-480.
 

 5. H. Biederman and L. Martinu, "Plasma Polymer‑metal Composite Films",  in "Plasma Deposition, Treatment and Etching of Polymers", R. d'Agostino, ed., Academic Press, Boston, 1990, 269‑320.
 

4. L. Martinu, "Amorphous Carbon Films", in "High Energy Density Technologies in Materials Science", F. Garbassi and E. Occhiello, eds., Kluwer Academic Publ., Dordrecht, 1989, 77‑87.
 

 3. J.E. Klemberg-Sapieha, A. Migdal, M.R. Wertheimer and H.P. Schreiber, "Application of Plasma Treatments to the Control of Properties in Polymer Systems", Proc. 2nd Int. Conf. on Composite Interfaces (ICCI-II), Cleveland, OH, June 1988, in "Interfaces in Polymer, Ceramic and Metal Matrix Composites", H. Ishida, ed., Elsevier, New York, (1988), 583-594.
 

 2. A. Bordeleau, L. Bertrand, G. Lamouche, E. Sacher, J.E. Klemberg-Sapieha and M.R. Wertheimer, "The Surface Analysis of Plasma Deposited Amorphous Silicon Nitride by Surface Tension Measurements and Photoacoustic IR Spectroscopy", Proc. Modified Surfaces Symposium, Fort Collins, CO, June 17-19, 1987, in "Chemically Modified Surfaces II".  Gordon and Breach, New York, (1988), 257-269.
 

1. H. Biederman and L. Martinu, "Metal-Doped Polymer Films Prepared in Low Pressure Plasmas", in "Advances in Low-Temperature Plasma Chemistry, Technology, Applications", H.V. Boenig, ed., Technomic, Lancaster, 1984, 37-48.

Brevets
  • 2022
    • Artem Shelemin, Oleg Zabeida, Ludvik Martinu, Nicolas Maitre, William Trottier-Lapointe, (2022) Article coated with a low refractive index layer based on organic silsesquioxane compounds, (Patent No EP4369062A1, WO2024104972A1). Retrieved from https://patents.google.com/patent/WO2024104972A1
  • 2021
    • Bill Baloukas, Robert Alan Bellman, Shandon Dee Hart, Karl William Koch III, Carlo Anthony Kosik Williams, Ludvik Martinu, Charles Andrew Paulson, James Joseph Price, Jincheng Qian, (2021) Glass, glass-ceramic and ceramic articles with protective coatings having hardness and toughness, (Patent No US11072558B2). Retrieved from https://patents.google.com/patent/US11072558B2/en
    • Ludvik Martinu, Amaury Kilicaslan, Jolanta Sapieha,Oleg Zabeida, Joel Larose, Etienne Bousser, Elvi Dalgaard, (2021) Pulse-managed plasma method for coating on internal surfaces of workpieces (Patent No CA3086154A1 - Application). Retrieved from https://patents.google.com/patent/CA3086154A1
  • 2020
    • Hélène Maury, Antonin Riera,  Bill Baloukas, Oleg Zabeida, Ludvik Martinu, (2020) Optical article having a multilayered antireflective coating including an encapsulated metal film, (Patent No EP3926370A1 -pending). Retrieved from https://patents.google.com/patent/EP3926370A1
    • Oleg Zabeida, William Trottier-Lapointe, Ludvik Martinu, (2020) Article coated with a low refractive index layer based on fluorinated organosilicon compounds (Patent No WO2020161128A1 - Application). Retrieved from https://patents.google.com/patent/WO2020161128A
  • 2019
    • Baloukas, B., Vernhes, R.,Desjardins, N.,Woodward-Gagné, S., Gagnon, J., Zabeida, O., Martinu, L.,  Trottier-Lapointe, W. & Faure, B. (2019). Optical article having directional micro- or nanostructured thin film coating, and its process (Patent No WO2019238836- Application). Retrieved from https://patents.google.com/patent/WO2019238836A1
    • Cavarroc, Marjorie; Knittel, Stephane; Sapieha, Jolanta ; Martinu, Ludvik ; Bergeron, Florence ; Loquai, Simon, (2019) Procédé de formation d'une couche d'alumine à la surface d'un substrat métallique (Patent No CA3043564A1 -pending, WO 2020229747A1 - Application)​​​​​​​. Retrieved from https://patents.google.com/patent/WO2020229747A1
  • 2018
    • Poirie, T., Schmitt, T., Martinu, L., Klemberg-Sapieha, J., Scherer, K., Trottier-Lapointe, W. & Dehoux, A. (2018). Article comprising a nanolaminate coating (Patent No WO 2018065595 - Application). Retrieved from https://patents.google.com/patent/WO2018065595
    • Caron, M., Scherer, K., Zabeida, O., Martinu, L., Klemberg-Sapieha, J. & Schmitt, T. (2018). Ophthalmic lens having increased resistance to hot and humid environment (Patent No WO 2018036963 - Application). Retrieved from https://patents.google.com/patent/WO2018036963
  • 2017
    • Trottier-Lapointe, W., Zabeida, O., Martinu, L., Schmitt, T. & Scherer, K. (2017). Article comportant une couche de nature organique-inorganique de bas indice de refraction obtenue par depot a angle oblique (Patent No WO 2017194871 - Application). Retrieved from https://patents.google.com/patent/WO2017194871
    • Zabeida, O., Schmitt, T., Klemberg-Sapieha, J., Martinu, L. & Scherer, K. (2017). Article having optimised thermomechanical properties, comprising a layer of titano-organic nature (Patent No US 20170052285 - Application). Retrieved from https://patents.google.com/patent/US20170052285
    • Trottier-Lapointe, W., Zabeida, O., Martinu, L., Klemberg-Sapieha, J. & Scherer, K. (2017). Optical article comprising a substrate with an antireflective coating (Patent No WO 2017194657 - Application). Retrieved from https://patents.google.com/patent/WO2017194657
  • 2016
  • 2014
  • 2013
Thèses et mémoires

 

 

  1. Dynamic Electrochromic Antireflective Coatings for Ophthalmic Applications
    par Martin Crouan (2023)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  2. Optical Properties of Thermal Barrier Coatings: Relation between Light Scattering, Microstructure and Degradation 
    par Francis Blanchard (2023) 

    Type de document: Thèse
    Membre externe du jury: Pantcho Stoyanov
    Directeur de recherche: Martinu, L. 
    Co-directreur: Klemberg-Sapieha, J.E.
    Département Polytechnique: Département de génie physique 

  3. Effect of Si and Si-Pt Reservoirs on the Growth of Multilayer Coatings for the Oxidation Protection of γ-TiAl Turbine Blades
    par Josefina Crespo Villegas (2022)

    Type de document: Thèse
    Membre externe du jury: Alina Agüero Bruna
    Directeur de recherche:  Klemberg-Sapieha, J.E.
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

  4. Effect of Growth Conditions and Surface Treatment on the Performance of Protective Coatings on Aircraft Engine Components
    par Erika J. Herrera Jimenez (2021)

    Type de document: Thèse
    Membre externe du jury: Stephen Muhl
    Directeur de recherche:  Klemberg-Sapieha, J.E.
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

  5. Icephobicity of Superhydrophobic Surfaces Under Atmospheric Icing, the Role of Surface Wettability on Impact Dynamics and Ice Growth Kinetics
    par Jacques Lengaigne (2020)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  6. Active Antireflective Coatings for Ophthalmic and Architectural Applications
    par Luis Dubé-Riopel (2020)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  7. Metal-Based Antireflective Coatings with Improved Durability for Ophthalmic Applications.  
    par Phillip Rumsby (2020)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  8. Selectively Absorbing Plasmonic Metal Island Films
    par  Antonin Riera (2019)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  9. Fabrication and Properties of Angular Selective Core Shell Slanted Column Nanostructured Films
    par  Sasha Woodward-Gagné (2019)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L.
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie physique

  10. Modeling the tribomechanical properties of multifunctional thin film coatings
    par Michael Laberge (2019)

    Type de document: Thèse
    Membre externe du jury: André G. McDonald
    Directeur de recherche: Martinu, L. 
    Co-directreur: Klemberg-Sapieha, J.E.
    Département Polytechnique: Département de génie physique

  11. Dépôt de revêtements durs et résistants à l’érosion sur la surface interne de cathodes creuses pour des applications en aérospatiale
    par Amaury Kilicaslan (2019)

    Type de document: Thèse
    Membre externe du jury: Jean-Luc Meunier
    Directeur de recherche: Martinu, L. 
    Co-directreur: Klemberg-Sapieha, J.E.
    Département Polytechnique: Département de génie physique

  12. Investigating the Durability of Stellitte Hardfacing Components Used in the Power Generation Industry
    par  Yuxiao Wu (2019)

    Type de document: Thèse
    Membre externe du jury:
    Directeur de recherche: Myriam Brochu
    Co-directreurs: Klemberg-Sapieha, J.E. 
    Département Polytechnique: Département de génie mecanique

  13. High-Temperature Oxidation Protection of y-Based TiAl by Sputtered AlOF Films
    par Florence Bergeron (2019)

    Type de document: Mémoire
    Directeur de recherche: Klemberg-Sapieha, J
    Co-directreur: Martinu, L
    Département Polytechnique: Département de génie physique

  14. Development of a Durable Thin-on-Thick Icephobic Coating System for Aerospace Applications
    par Stephen Brown (2019)

    Type de document: Mémoire
    Directeur de recherche: Klemberg-Sapieha, J
    Co-directreur: Martinu, L
    Département Polytechnique: Département de génie physique
     
  15. Growth Control and Study of Ultrathin Silver Films for Energy-Saving Coatings
    par Soroush Hafezian(2019)

    Type de document: Thèse
    Membre externe du jury: Ashrit, P.
    Directeur de recherche: Martinu, L.  
    Co-directreur: Kena-Cohen, S.
    Département Polytechnique: Département de génie physique

  16. Bias-Enhanced Tungsten Oxide Films for Durable Electrochromic Devices
    par Francis Blanchard (2018)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     
  17. Dépôt de couches minces de WO3 à incidence rasante pour un électrochromisme stable et la sélectivité angulaire
    par Julien Gagnon (2018)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     
  18. Étude des contraintes thermomécaniques dans les revêtements multicouches utilisés en optique
    par Frédérik Poitevin (2018)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique

  19. Development of Fe3Al-based HVOF coatings for wear resistant applications
    par Fabrice Pougoum (2018)

    Type de document: Thèse
    Membre externe du jury: Jean-Luc Meunier
    Directeur de recherche: Klemberg-Sapieha, J.E. 
    Co-directreurs: Martinu, L., Schulz, R.
    Département Polytechnique: Département de génie physique

  20. Caractérisation des mécanismes d'usure en cavitation de revêtements HVOF à base de cavitec.
    par Sébastien Lavigne (2017)

    Type de document: Mémoire
    Directeur de recherche: Klemberg-Sapieha, J
    Co-directreurs: Martinu, L; Schultz, R
    Département Polytechnique: Département de génie physique
  21. Durable Thermochromic VO2 Films Deposited by HiPIMS.
    by Simon Loquai (2017)

    Type de document: Thèse
    Membre externe du jury: Helmersson, U.
    Directeur de recherche: Martinu, L.
    Co-directrice: Sapieha, J.E.
    Département Polytechnique: Département de génie physique

  22. Caractérisations tribomécaniques in situ de couches minces hybrides pour l’optique ophtalmique
    par Thomas Poirié (2016)

    Type de document: Thèse
    Membre externe du jury: Philippe Bocher
    Directeur de recherche: Klemberg-Sapieha, J.E. 
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

  23. Stabilité environnementale des couches minces hybrides organiques/inorganiques sur substrats de plastique
    par Martin Caron (2016)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique

  24. Caractérisation de la résistance à l’érosion par cavitation d’aciers et de revêtements HVOF pour la protection de turbines hydrauliques
    par Gabriel Taillon (2016)

    Type de document: Mémoire
    Directeur de recherche: Klemberg-Sapieha, J
    Co-directreur: Tôn-Thât, L
    Co-directreur: Martinu, L
    Co-directreur: Schulz, R
    Département Polytechnique: Département de génie physique

  25. Nouveaux Matériaux à Indice de Réfraction Ultra-Faible pour Applications Ophtalmiques
    par William Trottier-Lapointe (2015)


    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     
  26. Couches minces électrochromiques d’oxyde de tungstène dense et poreaux pour des applications de contrôle énergétique
    par Hubert Camirand (2015)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     
  27. Tribo-Mechanical and Electronic Properties of Boron-Containing Coatings
    by Jincheng Qian (2015)

    Type de document: Thèse
    Membre externe du jury: Jean-Luc Meunier
    Directeur de recherche: Sapieha, J.E. et Wenjun Zhang
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

  28. Thin Coatings for Heavy Industry : Advanced Coatings for Pipes and Valves
    by Luc Vernhes (2015)

    Type de document: Thèse
    Membre externe du jury: Christian Moreau
    Directeur de recherche: Sapieha, J.E. et Wenjun Zhang
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

  29. Contrôle des propriétés des couches optiques par bombardement ionique
    par Marushka, Viktor (2014)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     

  30. Thermochromic VO2 Thin Films Deposited by Magnetron Sputtering for Smart Window Applications
    par Fortier, Jean-Philippe (2014)

    Type de document: Mémoire
    Directeur de recherche: Martinu, L
    Co-directreur: Klemberg-Sapieha, J
    Département Polytechnique: Département de génie physique
     

  31. Rapport M/L de disques de galaxies issus de modèles CSPE et contrôle des contraintes mécaniques dans la conception de revêtements optiques
    par De Denus-Baillargeon, Marie-Maude (2014)

    Type de document: Thèse
    Membre externe du jury: Rosado, Margarita
    Directeur de recherche: Carignan, Claude
    Co-directreur: Martinu, Ludvik
    Département  Physique, Université de Montréal

     
  32. Solid Particle Erosion Mechanisms of Protective Coatings for Aerospace Applications
    par Bousser, Etienne (2013)

    Type de document: Thèse
    Membre externe du jury: Matthews, Allan.
    Directeur de recherche: Sapieha, J.E.
    Co-directreur: Martinu, L.
    Département Polytechnique: Département de génie physique

     
  33. Ablation par laser pulsé de revêtements antiérosion pour le domaine aéronautique
    par Ragusich, Alexis (2013)

    Type de document: Mémoire
    Directeur de recherche: Sapieha, J.E.
    Co-directrice: Martinu, L. et Meunier, M.
    Département Polytechnique: Département de génie physique

     
  34. Thin film-based optically variable security devices: From passive to active
    par Baloukas, Bill (2012)

    Type de document: Thèse
    Membre externe du jury: Granqvist, C.G.
    Directeur de recherche: Martinu, L.
    Département Polytechnique: Département de génie physique

     
  35. Characterization of high power impulse magnetron sputtering discharges
    par Hala, Matej (2011)

    Type de document: Thèse
    Membre externe du jury: Helmersson, U.
    Directeur de recherche: Martinu, L.
    Co-directrice: Sapieha, J.E.,
    Département Polytechnique: Département de génie physique

     
  36. Conception de couches minces tribologiques pour augmenter la resistance a l'erosion par impacts de particules
    par Hassani, Salim (2008)

    Type de document: Thèse
    Membre externe du jury: Tarnowski, J.
    Directeur de recherche: Balazinski, M.
    Co-directreurs: Sapieha, J.E. et Martinu, L.
    Département Polytechnique: Département de génie mécanique
     
  37. Methodes avancees pour le design de filtres optiques avec des indices de refraction intermediaires arbitraires
    par Larouche, Stéphane (2008)
    Type de document: Thèse
    Membre externe du jury: Drobrowolski, J.A.
    Directeur de recherche: Martinu, L.
    Département Polytechnique: Département de génie mécanique
     
  38. Proprietes optiques lineaires et non-lineaires de nanocomposites metal/dielectrique anisotropes
    par Lamarre, Jean-Michel (2008)

    Type de document: Thèse
    Directeur de recherche: Martinu, L.
    Co-directeur de recherche: Lequime, M.
    Département Polytechnique: Département de génie physique
    Université Paul Cézanne: Institut Fresnel

  39. Ecriture directe de circuits optiques plans dans des couches minces de silice sur silicium par ablation au laser de dioxyde de carbone
    par Ozcan, Lutfu Celebi (2008)

    Type de document: Thèse
    Research director: Kashyap, R.
    Codirector: Martinu, L.
    Department: Engineering Physics

  40. Mechanical properties of white layers formed by different machining processes on nickel-based superalloy
    par Proust, Edouard (2008)

    Type de document: Mémoire
    Research director: Sapieha, J.
    Codirectors: Martinu, L.
    Department: Engineering Physics

  41. Caracterisation d'un placage de cobalt-phosphore nanocristallin
    par Beskri, Samih (2008)

    Type de document: Mémoire
    Research director: Sapieha, J.
    Codirectors: Ben-Salah, N, Martinu, L.
    Department: Engineering Physics

  42. Couches minces dures de carbone amorphe pour des applications biomedicales
    par Amireault, Philippe (2008)

    Type de document: Mémoire
    Research director: Martinu, L.
    Codirector: Sapieha, J.
    Department: Engineering Physics

  43. Fabrication et analyse de revetements de nitrure de silicium deposes par plasma pour de nouvelles applications optiques
    par Vernhes, Richard (2007)

    Type de document: Thèse
    Membre externe du jury: Macleod, A.H.
    Directeur de recherche: Martinu, L.
    Co-directrice: Sapieha, J.E.
    Département Polytechnique: Département de génie physique
     
  44. Stabilite thermique de filtres optiques interferentiels quart d'onde et a gradient d'indice pour l'astronomie
    by de Denus-Baillargeon, Marie-Maude (2007)

    Type de document: Mémoire
    Research director: Martinu, L.
    Codirector: Carignan, C.
    Department: Engineering Physics

  45. Ion bombardment effects in low-pressure plasmas: In situ spectroscopic ellipsometry and Monte-Carlo simulation study
    par Amassian, Aram (2006)

    Type de document: Thèse
    Membre externe du jury: Aspnes, D.E.
    Directeur de recherche: Martinu, L.
    Département Polytechnique: Département de génie physique
     
  46. Conception et fabrication de dispositifs de securite optiques
    par Baloukas, Bill (2006)

    Type de document: Mémoire
    Membre externe du jury: Dobrowolski, J.A.
    Directeur de recherche: Martinu, Ludvik
    Département Polytechnique: Département de génie physique
     
  47. Stabilite thermique des proprietes optiques, mecaniques et microstructurales des oxydes de tantale et de niobium fabriques par plasma
    par Masse, Jean-Philippe (2005)

    Type de document: Mémoire
    Membre externe du jury: Stansfield, B.
    Directeur de recherche: Martinu, L.
    Département Polytechnique: Département de génie physique
     
  48. Mechanical and optical properties of plasma deposited superhard nanocomposite coatings
    par Jedrzejowski, Pawel M. (2004)

    Type de document: Thèse
    Membre externe du jury: Stansfield, B.
    Directrice de recherche: Sapieha, J.E.
    Co-directrice: Martinu, L. et Mitura, S.
    Département Polytechnique: Département de génie physique
  49. Étude et caractérisation des propriétés tribo-mécaniques de revêtements déposés par plasma
    par Raymond, Marc-André (2004)

    Type de document: Mémoire 
    Directeur de recherche: Sapieha, Jolanta
    Département Polytechnique: Département de génie physique

  50. Étude des mélanges de SiO2/TiO2 déposés par PECVD et fabrication de filtres à gradient d'indice 
    par Larouche, Stéphane (2003)

    Type de document: Mémoire 
    Directeur de recherche: Martinu, Ludvik
    Département Polytechnique: Département de génie physique

  51. Physico-chimie des surfaces de polyoléfines traitées par décharges luminescentes à barrière diélectrique à la pression atmosphérique 
    par Guimond, Sébastien (2002)

    Type de document: Mémoire  
    Directeur de recherche: Wertheimer, Michael R. ; Sapieha, Jolanta Ewa
    Département Polytechnique: Département de génie physique

  52. Étude de couches optiques inhomogènes déposées par plasma 
    par Poitras, Daniel (2000)

    Type de document: thèse
    Directeur de recherche: Martinu, Ludvik ; Wertheimer, Michael R.
    Département Polytechnique: Département de génie physique et de génie des matériaux

  53. Study of Ion Bombardment Characteristics in High Frequency Plasmas 
    par Zabeida, Oleg (2000)

    Type de document: thèse
    Membre externe du jury: Stansfield, B.; Margot, J.
    Directeur de recherche: Martinu, Ludvik
    Département Polytechnique: Département de génie physique et de génie des matériaux

  54. Ellipsometric Characterization of Gold/Dielectric Nanocomposite Films 
    par Dalacu, Dan (2000)

    Type de document: thèse
    Directeur de recherche: Najafi, S. Iraj, Martinu, Ludvik.
    Département Polytechnique: Département de génie physique et de génie des matériaux

  55. Caractérisation des propriétés mécaniques de couches minces déposées par plasma et de surfaces polymériques traitées par plasma
    par Dahl, Sigrid (1999)

    Type de document: Mémoire 
    Directeur de recherche: Sapieha, Jolanta Ewa
    Département Polytechnique: Département de génie physique et de génie des matériaux

  56. Depot de composes inorganiques du Si par plasma CVD sur substrats polymeriques: Caracterisation structurale et fonctionnelle
    par da Silva Sobrinho, Argemiro Soares (1999)

    Type de document: thèse
    Research directors: Wertheimer, M.R. and Sapieha, J.
    Department: Engineering Physics and Material Engineering

  57. Spectroscopie d'émission VUV-visible provenant de plasmas basse pression : applications aux traitements de surfaces polymériques
    par Fozza, Alexandru C. (1999)

    Type de document: thèse 
    Directeur de recherche: Wertheimer, Michael R. ; Martinu, Ludvik
    Département Polytechnique: Département de génie physique et de génie des matériaux

  58. Analysis of Copper/Fluoropolymer Film Systems for Multilevel Interconnects 
    par Alptekin, Avni (1998)

    Type de document: Mémoire 
    Directeur de recherche: Martinu, Ludvik ; Sacher, Edward
    Département Polytechnique: Département de génie physique et de génie des matériaux

  59. Étude ellipsométrique de l'interface entre des substrats polymériques et des couches optiques déposées par plasma
    par Bergeron, Adam (1998)

    Type de document: Mémoire 
    Directeur de recherche: Martinu, Ludvik
    Département Polytechnique: Département de génie physique et de génie des matériaux

  60. Integrated Optics Mach-Zehnder Interferometer Sensor 
    par Malek-Tabrizi, Alireza (1996)

    Type de document: Mémoire 
    Directeur de recherche: Martinu, Ludvik ; Najafi, S. Iraj
    Département Polytechnique: Département de génie physique

  61. Analyse des propriétés mécaniques des couches minces par la méthode de la microrayure
    par Leroux, Pierre (1994)

    Type de document: Mémoire ou thèse
    Directeur de recherche: Wertheimer, Michael R. ; Martinu, Ludvik 
    Département Polytechnique: Département de génie physique

  62. Étude de la microstructure de revêtements optiques homogènes et inhomogènes
    par Poitras, Daniel (1994)

    Type de document: Mémoire 
    Directeur de recherche: Wertheimer, Michael R. ; Martinu, Ludvik 
    Département Polytechnique: Département de génie physique