Ashrafi, F., & Vo, H. D. (2024). Passive flow control at impeller radial bend for stall delay in centrifugal compressors with fishtail pipe diffusers. Aerospace Science and Technology, 145, 108840 (23 pages).
Répertoire des expertises
Vo, Huu Duc
Répertoire des expertises
Vo, Huu Duc
Répertoire des expertises
Publications par type
Article de revue (22)
Communication de conférence (20)
Livre (1)
Chapitre de livre
Brevet (2)
Rapport
Thèse
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Huu Duc Vo (45)
- Articles de revue (22)
- 2024
Article de revue
- 2022
Article de revue Dammak, H., Versailles, P., & Vo, H. D. (2022). Coupled High Pressure-Temperature Effects on Performance of Dielectric Barrier Discharge Actuators. AIAA Journal, 60(6), 3917-3922.Article de revue Gu, X., Vo, H. D., Mureithi, N. W., & Laurendeau, É. (2022). Plasma gurney flap flight control at low angle of attack. Journal of Aircraft, 60(1), 172-189.
- 2016
Article de revue Cevik, M., Vo, H. D., & Yu, H. (2016). Casing treatment for desensitization of compressor performance and stability to tip clearance. Journal of Turbomachinery, 138(12), 16 pages.Article de revue Akcayoz, E., Vo, H. D., & Mahallati, A. (2016). Controlling corner stall separation with plasma actuators in a compressor cascade. Journal of Turbomachinery, 138(8), 13 pages.Article de revue Ashrafi, F., Michaud, M., & Vo, H. D. (2016). Delay of rotating stall in compressors using plasma actuators. Journal of Turbomachinery, 138(9), 12 pages.Article de revue Erler, E., Vo, H. D., & Yu, H. (2016). Desensitization of axial compressor performance and stability to tip clearance size. Journal of Turbomachinery, 138(3), 12 pages.Article de revue Michaud, M., Milan, P., & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016, 1-10.Article de revue Vo, H. D., & Trépanier, J.-Y. (2016). Undergraduate Project in Compressor Rig Design, Fabrication, and Testing for Complete Engineering Training. Journal of Engineering for Gas Turbines and Power, 138(5), 13 pages.
- 2014
Article de revue Thomassin, J., Mureithi, N. W., & Vo, H. D. (2014). Mixing layer resonance under high-speed stream forcing. Journal of Sound and Vibration, 333(24), 6453-6473.
- 2013
Article de revue Drolet, M., Vo, H. D., & Mureithi, N. W. (2013). Effect of Tip Clearance on the Prediction of Nonsynchronous Vibrations in Axial Compressors. Journal of Turbomachinery, 135(1).
- 2012
Article de revue Versailles, P., Chishty, W. A., & Vo, H. D. (2012). Application of Dielectric Barrier Discharge to Improve the Flashback Limit of a Lean Premixed Dump Combustor. Journal of Engineering for Gas Turbines and Power, 134(3), 8-8.
- 2011
Article de revue Versailles, P., Ghosh, S., Vo, H. D., & Masson, C. (2011). Preliminary assessment of wind turbine blade lift control via plasma actuation. Wind Engineering, 35(3), 339-356.Article de revue Lemire, S., & Vo, H. D. (2011). Reduction of Fan and Compressor Wake Defect Using Plasma Actuation for Tonal Noise Reduction. Journal of Turbomachinery, 133(1), 011017-011017.Article de revue Thomassin, J., Vo, H. D., & Mureithi, N. W. (2011). The tip clearance flow resonance behind axial compressor nonsynchronous vibration. Journal of Turbomachinery, 133(4).
- 2010
Article de revue Versailles, P., Gingras-Gosselin, V., & Vo, H. D. (2010). Impact of pressure and temperature on the performance of plasma actuators. AIAA Journal, 48(4), 859-863.Article de revue Vo, H. D. (2010). Role of tip clearance flow in rotating instabilities and nonsynchronous vibrations. Journal of Propulsion and Power, 26(3), 556-561.Article de revue Vo, H. D. (2010). Rotating stall suppression in axial compressors with casing plasma actuation. Journal of Propulsion and Power, 26(4), 808-818.
- 2009
Article de revue Thomassin, J., Vo, H. D., & Mureithi, N. W. (2009). Blade Tip Clearance Flow and Compressor Nonsynchronous Vibrations: the Jet Core Feedback Theory as the Coupling Mechanism. Journal of Turbomachinery, 131(1).Article de revue Lemire, S., Vo, H. D., & Benner, M. W. (2009). Performance improvement of axial compressors and fans with plasma actuation. International Journal of Rotating Machinery, 2009, 1-13.
- 2008
Article de revue Vo, H. D., Tan, C. S., & Greitzer, E. M. (2008). Criteria for spike initiated rotating stall. Journal of Turbomachinery, 130(1), 1-9.
- 2007
Article de revue Vo, H. D. (2007). Active suppression of rotating stall inception with distributed jet actuation. International Journal of Rotating Machinery, 2007, 1-16.
- 2024
- Communications de conférence (20)
- 2018
Communication de conférence Dejour, Q., & Vo, H. D. (juin 2018). Assessment of a novel non-axial counter-rotating compressor concept for aero-engines [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (9 pages).Communication de conférence Ashrafi, F., & Vo, H. D. (juin 2018). Assessment of flow control strategies for improving centrifugal compressor efficiency [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (11 pages).Communication de conférence Souleimani, Y., Vo, H. D., & Yu, H. (juin 2018). Performance desensitization for a high-speed axial compressor [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (14 pages).
- 2015
Communication de conférence Akcayoz, E., Vo, H. D., & Mahallati, A. (juin 2015). Controlling corner stall separation with plasma actuators in a compressor cascade [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec (11 pages).Communication de conférence Ashrafi, F., Michaud, M., & Vo, H. D. (juin 2015). Delay of rotating stall in compressors using plasma actuators [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec.Communication de conférence Erler, E., Vo, H. D., & Yu, H. (juin 2015). Desensitization of axial compressor performance and stability to tip clearance size [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec (14 pages).Communication de conférence Milan, P., Demers, F., & Vo, H. D. (juin 2015). Modeling of saw-tooth DBD plasma actuators for flow control simulations [Communication écrite]. 45th AIAA Fluid Dynamics Conference, Dallas, TX, United states (11 pages).Communication de conférence Djeghri, N., Vo, H. D., & Yu, H. (juin 2015). Parametric study for lossless casing treatment on a mixed-flow compressor rotor [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec.Communication de conférence Dumas, M., Vo, H. D., & Yu, H. (juin 2015). Post-surge load prediction for multi-stage compressors via CFD simulations [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec.Communication de conférence Vo, H. D., & Trépanier, J.-Y. (juin 2015). Undergraduate project in compressor rig design, fabrication and testing for complete engineering training [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec.
- 2014
Communication de conférence Bagade, P. M., Sengupta, T. K., Sengupta, S., & Vo, H. D. (décembre 2014). Frequency Dependent Capacitance SDBD Plasma Model for Flow Control [Communication écrite]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India.
- 2012
Communication de conférence Drolet, M., Vo, H. D., & Mureithi, N. W. Effect of Tip Clearance on the Prediction of Non-Synchronous Vibrations in Axial Compressors [Communication écrite]. ASME Turbo Expo.
- 2010
Communication de conférence Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part I - Experimental Investigation [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada.Communication de conférence Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part II - Numerical Model Validation and Parametric Study [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada.
- 2009
Communication de conférence Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Experimental Demonstration of the Tip Clearance Flow Resonance Behind Compressor Non-Synchronous Vibration [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany.Communication de conférence Drolet, M., Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Numerical Investigation Into Non-Synchronous Vibrations of Axial Flow Compressors by the Resonant Tip Clearance Flow [Communication écrite]. ASME Turbo Expo: Power for Land, Sea, and Air (GT 2009), Orlando, Florida, USA.
- 2008
Communication de conférence Vo, H. D., Cameron, J. D., & Morris, S. C. (juin 2008). Control of Short Length-Scale Rotating Stall Inception on a High-Speed Axial Compressor With Plasma Actuation [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany.
- 2007
Communication de conférence Thomassin, J., Vo, H. D., & Mureithi, N. W. (mai 2007). Blade Tip Clearance Flow and Compressor NSV: The Jet Core Feedback Theory as the Coupling Mechanism [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2007), Montreal, Qc, Canada.Communication de conférence Vo, H. D. (juin 2007). Control of rotating stall in axial compressors using plasma actuators [Communication écrite]. 37th AIAA Fluid Dynamics Conference, Miami, FL, United States.Communication de conférence Vo, H. D. (mai 2007). Suppression of short length-scale rotating stall inception with glow discharge actuation [Communication écrite]. ASME Turbo Expo, Montréal, Québec.
- 2018
- Livres (1)
- 2018
Livre Vo, H. D., & Mureithi, N. W. (2018). Improving aircraft performance with plasma actuators.
- 2018
- Brevets (2)
- 2016
Brevet Vo, H. D., Cevik, M., & Erler, E. (2016). Compressor casing. (Demande de brevet no US20160040546).
- 2012
Brevet Vo, H. D. (2012). Apparatus and method for controlling a compressor. (Brevet no US8096756).
- 2016