Castillo-Sánchez, J.-R., Salloum-Abou-Jaoude, G., Gheribi, A. E., Lafaye, P., Oishi, K., Masse, J.-P., Bousser, É., L'Espérance, G., & Harvey, J.-P. (2024). Synthesis and characterization of (Al,Si)₃(Zr,Ti)-D0₂₂/D0₂₃ intermetallics: Understanding the stability of silicon substitution. Acta Materialia, 262, 119455 (18 pages).
Répertoire des expertises
L'Espérance, Gilles
Répertoire des expertises
L'Espérance, Gilles
Répertoire des expertises
Publications par type
Article de revue (93)
Communication de conférence (45)
Livre
Chapitre de livre (1)
Brevet (7)
Rapport (1)
Thèse
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Gilles L'Espérance (147)
- Articles de revue (93)
- 2024
Article de revue
- 2021
Article de revue Debia, M., Carpentier, M., & L'Espérance, G. (2021). Characterization of Occupational Exposures to Engineered Nanoparticles During the Finishing Process of a Hardwood Floor Manufacturing Plant. Annals of Work Exposures and Health, 65(7), 868-873.Article de revue Sioui-Latulippe, O., Beaulieu, P., Boisvert, M., Masse, J.-P., Christopherson, D., & L'Espérance, G. (2021). The Characterization of a Gas-Atomized Ferritic Steel Powder Pre-alloyed with 6 Wt Pct Aluminum. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 52(7), 3051-3063.
- 2020
Article de revue Da Silveira Fleck, A., Catto, C., L'Espérance, G., Masse, J.-P., Roberge, B., & Debia, M. (2020). Characterization and Quantification of Ultrafine Particles and Carbonaceous Components from Occupational Exposures to Diesel Particulate Matter in Selected Workplaces. Annals of Work Exposures and Health, 64(5), 490-502.Article de revue Brunner, P.-L. M., Masse, J.-P., L'Espérance, G., & Wuest, J. D. (2020). Imaging layers in thin-film molecular devices by transmission electron microscopy, using milling by focused ion beams and deposition on NaCl and Si. Canadian Journal of Chemistry, 98(9), 582-588.
- 2019
Article de revue Ilia, E., Plamondon, P., Masse, J.-P., & L'Espérance, G. (2019). Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys. Materials Science & Engineering A, 767, 138383 (9 pages).Article de revue Nath, S. D., Clinning, E., Gupta, G., Wuelfrath-Poirier, V., L'Espérance, G., Gulsoy, O., Kearns, M., & Atre, S. V. (2019). Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusion. Additive Manufacturing, 28, 682-691.Article de revue Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports. ACS Applied Materials and Interfaces, 11(8), 8499-8506.
- 2018
Article de revue Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, 262-269.
- 2017
Article de revue Martin, J., Beauparlant, M., Sauvé, S., & L'Espérance, G. (2017). Effect of accelerating voltage on beam damage of asbestos fibers in the transmission electron microscope (TEM). Micron, 96, 1-8.Article de revue Kouassi, S., Catto, C., Ostiguy, C., L'Espérance, G., Kroeger, J., & Debia, M. (2017). Exposure Assessment in a Single-Walled Carbon Nanotube Primary Manufacturer. Annals of Work Exposures and Health, 61(2), 260-266.Article de revue Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (2017). Solvent-cast based metal 3D printing and secondary metallic infiltration. Journal of Materials Chemistry C, 5(40), 10448-10455.Article de revue Boisvert, M., Christopherson, D., Beaulieu, P., & L'Espérance, G. (2017). Treatment of ferrous melts for the improvement of the sphericity of water atomized powders. Materials & Design, 116, 644-655.
- 2016
Article de revue Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146.Article de revue Martin, J., Beauparlant, M., Sauvé, S., & L'Espérance, G. (2016). Effect of temperature on beam damage of asbestos fibers in the transmission electron microscope (TEM) at 100kV. Micron, 94, 26-36.Article de revue Boisvert, M., Christopherson, D., & L'Espérance, G. (2016). Observation of Nanometric Silicon Oxide Bifilms in a Water-Atomized Hypereutectic Cast Iron Powder. Metallurgical and Materials Transactions B, 47(5), 2971-2978.Article de revue Martin, J., Beauparlant, M., Sauve, S., & L'Espérance, G. (2016). On The threshold conditions for electron beam damage of asbestos amosite fibers in the transmission electron microscope (tem). Journal of Occupational and Environmental Hygiene, 13(12), 924-935.
- 2013
Article de revue Dolez, P., Cloutier, Y., Noël, A., Tabet, L., Gautrin, D., Debia, M., L'Espérance, G., Hallé, S., Bahloul, A., & Vinches, L. (2013). Advancement in Québec Research on the Prevention of Risks Related to Occupational Exposure to Nanomaterials. [Avancement des recherches au Québec sur la prévention des risques liés à l'exposition professionnelle aux nanomatériaux]. Relations Industrielles-Industrial Relations, 68(4), 623-642.Article de revue Noël, A., L'Espérance, G., Cloutier, Y., Plamondon, P., Boucher, J., Philippe, S., Dion, C., Truchon, G., & Zayed, J. (2013). Assessment of the Contribution of Electron Microscopy to Nanoparticle Characterization Sampled With Two Cascade Impactors. Journal of Occupational and Environmental Hygiene, 10(3), 155-172.
- 2012
Article de revue Beaudet, F., Blais, C., Lehuy, H., Voyzelle, B., L'Espérance, G., Masse, J.-P., & Krishnadev, M. (2012). Improvement of Hardenability and Static Mechanical Properties of P20+0.5ni Mold Steel Through Additions of Vanadium and Boron. ISIJ International, 52(3), 424-433.
- 2011
Article de revue Baïlon-Poujol, I., Bailon, J.-P., & L'Espérance, G. (2011). Ball-mill grinding kinetics of master alloys for steel powder metallurgy applications. Powder Technology, 210(3), 267-272.Article de revue Bernier, F., Beaulieu, P., Bailon, J.-P., & L'Espérance, G. (2011). Effect of Cu infiltration on static and dynamic properties of PM steels. Powder Metallurgy, 54(3), 314-319.Article de revue Bernier, F., Plamondon, P., Bailon, J.-P., & L'Espérance, G. (2011). Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel. Powder Metallurgy, 54(5), 559-565.
- 2010
Article de revue Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2010). Modified interfacial tensions measured in situ in ternary polymer blends demonstrating partial wetting. Polymer, 51(6), 1472-1484.
- 2009
Article de revue Blais, C., L'Espérance, G., & Plamondon, P. (2009). Characterization of powders and pm components utilizing transmission electron microscopy. International Journal of Powder Metallurgy, 45(2), 29-38.Article de revue Salehi, F., Zayed, J., Audusseau, S., Muller, C., Truchon, G., Plamondon, P., L'Espérance, G., Chevalier, G., & Mazer, B. (2009). Immunological Responses in C3h/Hej Mice Following Nose-Only Inhalation Exposure to Different Sizes of Beryllium Metal Particles. Journal of Applied Toxicology, 29(1), 61-68.Article de revue Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (2009). In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting. Macromolecules, 42(19), 7518-7529.Article de revue Bernier, F., Bailon, J.-P., & L'Espérance, G. (2009). Microstructural characterization and mechanical properties of free-machining sintered steel parts containing up to 1 Wt Pct MnS. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 40(10), 2291-2300.Article de revue Scherm, F., Völkl, R., van Smaalen, S., Mondal, S., Plamondon, P., L'Espérance, G., Bechmann, F., & Glatzel, U. (2009). Microstructural characterization of interpenetrating light weight metal matrix composites. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 518(1-2), 118-123.Article de revue Kunst, M., Fischersworring-Bunk, A., L'Espérance, G., Plamondon, P., & Glatzel, U. (2009). Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) alloy. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 510-511(3-6), 387-392.
- 2008
Article de revue Muller, C., L'Espérance, G., Plamondon, P., Kennedy, G. G., & Zayed, J. (2008). Characterization of Beryllium Particles From Calsifrit. Journal of Toxicology and Environmental Health-Part a-Current Issues, 71(16), 1091-1099.Article de revue Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800.Article de revue Boilard, P., L'Espérance, G., & Blais, C. (2008). Effect of Prealloyed Mns Content and Sintered Density on Machinability and Mechanical Properties. International Journal of Powder Metallurgy, 44(2), 33-40.
- 2007
Article de revue Lonescu-Vasii, L. L., Wood-Adams, P. M., Duchesne, E., L'Espérance, G., Karjala, T., & Ansems, P. (2007). Morphological Analysis of Highly Filled Propylene/Ethylene Copolymers. Journal of Applied Polymer Science, 105(6), 3757-3772.
- 2005
Article de revue Blais, C., Serafini, R. E., & L'Espérance, G. (2005). Effect of Hydrogen Concentration in Cooling Zone on Sinter Hardening. International Journal of Powder Metallurgy, 41(4), 33-41.Article de revue Virgilio, N., Favis, B. D., Pepin, M. F., Desjardins, P., & L'Espérance, G. (2005). High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy. Macromolecules, 38(6), 2368-2375.Article de revue Rouleau, M., Dion, C., Plamondon, P., Kennedy, G. G., L'Espérance, G., & Zayed, J. (2005). Physical and Chemical Characterization of Beryllium Particles From Several Workplaces in Québec, Canada - Part A: Determining Methods for the Analysis of Low Levels of Beryllium. Journal of Toxicology and Environmental Health-Part a-Current Issues, 68(21), 1889-1905.Article de revue Rouleau, M., Dion, C., Plamondon, P., L'Espérance, G., & Zayed, J. (2005). Physical and Chemical Characterization of Beryllium Particles From Several Workplaces in Québec, Canada - Part B: Time-of-Flight Secondary-Ion Mass Spectroscopy. Journal of Toxicology and Environmental Health-Part a-Current Issues, 68(21), 1907-1916.
- 2004
Article de revue Imai, T., Mao, J. F., Dong, S. L., Shigematsu, I., Saito, N., & L'Espérance, G. (2004). High Strain Rate Superplasticity of Tic Particulate Reinforced 2014 Aluminum Alloy Composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 364(1-2), 281-286.Article de revue Beaupré, L. A., Salehi, F., Zayed, J., Plamondon, P., & L'Espérance, G. (2004). Physical and Chemical Characterization of Mn Phosphate/Sulfate Mixture Used in an Inhalation Toxicology Study. Inhalation Toxicology, 16(4), 231-244.
- 2002
Article de revue Zhong, W. M., L'Espérance, G., & Suery, M. (2002). Effect of current Mg concentration on interfacial reactions during remelting of Al-Mg(5083)/Al₂O₃P composites. Materials Characterization, 49(2), 113-119.Article de revue Blais, C., & L'Espérance, G. (2002). Turning and Drilling of Parts Made From Sinter Hardenable Steel Powders. Powder Metallurgy, 45(1), 39-47.
- 2001
Article de revue Blais, C., L'Espérance, G., & Bourgeois, I. (2001). Characterisation of Machinability of Sintered Steels During Drilling Operations. Powder Metallurgy, 44(1), 67-76.Article de revue Dionne, M., L'Espérance, G., & Mirchi, A. (2001). Microscopic Characterization of a Tib2-Carbon Material Composite: Raw Materials and Composite Characterization. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 32(10), 2649-2656.Article de revue Blais, C., & L'Espérance, G. (2001). Optimization of Machining Operations of Parts Made of High Performance Alloyed Powders. Journal of materials and manufacturing, 110(5), 275-280.
- 2000
Article de revue Blais, C., L'Espérance, G., & Forget, C. (2000). Method based on integrated microscopy to determine the fraction of alloyed/unalloyed particles in P/M steel powders and parts. P/M science & technology briefs, 2(5), 18-23.Article de revue Duchesne, E., L'Espérance, G., & De Rege, A. (2000). Sinter-Hardening and Hardenability. International Journal of Powder Metallurgy, 36(1), 49-60.
- 1999
Article de revue Blais, C., L'Espérance, G., & Evans, G. M. (1999). Characterisation of Inclusions Found in C-Mn Steel Welds Containing Titanium. Science and Technology of Welding and Joining, 4(3), 143-150.Article de revue Zayed, J., Hong, B., & L'Espérance, G. (1999). Characterization of Manganese Containing Particles Collected From the Exhaust Emissions of Automobiles Running With Mmt Additive. Environmental Science & Technology, 33(19), 3341-3346.Article de revue Duchesne, E., L'Espérance, G., & Forget, C. (1999). Development of an automatic procedure based on microhardness to identify martensite, bainite and pearlite in sinter hardened parts. Advances in powder metallurgy and particulate materials, 3, 12.151-12.164-12.151-12.164.Article de revue Ardeleanu, A., Loranger, S., Kennedy, G. G., L'Espérance, G., & Zayed, J. (1999). Emission rates and physico-chemical characteristics of Mn particles emitted by vehicles using Methylcyclopentadienyl Manganese Tricarbonyl (MMT) as an octane improver. Water, Air, and Soil Pollution, 115(1/4), 411-427.Article de revue Baril, E., & L'Espérance, G. (1999). Studies of the morphology of the al-rich interfacial layer formed during the hot dip galvanizing of steel sheet. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(3A), 681-695.
- 1998
Article de revue Blais, C., & L'Espérance, G. (1998). Characterization of Inclusions in Steel: When Not Only Size Matters. CIM Bulletin, 91(1021), 116-120.Article de revue Blais, C., L'Espérance, G., & Baril, E. (1998). Characterization of 25-75 nm phases found at the peripyhery of multiphase inclusions: techniques comparison and selection. Journal of Microscopy, 189(3), 249-262.Article de revue Blais, C., L'Espérance, G., & Miele, P. (1998). Experimental evaluation of the reducibility of oxide particles found in powders and P/M parts. Advances in powder metallurgy and particulate materials (1), 2.41-2.50-2.41-2.50.
- 1997
Article de revue Blais, C., L'Espérance, G., LeHuy, H., & Forget, C. (1997). Development of an integrated method for fully characterizing multiphase inclusions and its application to calcium-treated steels. Materials Characterization, 38(1), 25-37.Article de revue Zayed, J., L'Espérance, G., Loranger, S., Pfeifer, G. D., & Kennedy, G. G. (1997). Exposure to respirable and total manganese and the contribution of MMT (methylcyclopentadienyl manganese tricarbonyl) used in inleaded gasoline. AIHA journal.Article de revue Ababou, Y., Desjardins, P., Chennouf, A., Masut, R. A., Yelon, A., Beaudoin, M., Bensaada, A., Leonelli, R., & L'Espérance, G. (1997). Optical absorption and determination of band offset in strain-balanced GaInP/InAsP multiple quantum wells grown by low-pressure metalorganic vapor phase epitaxy. Semiconductor Science and Technology, 12(5), 550-554.Article de revue Lefebvre, L. P., L'Espérance, G., & Suery, M. (1997). Particle degradation during remelting of Al-1 pct Mg alloy reinforced with SiCp coated with sol-gel-produced TiO2. Journal of Materials Science, 32(15), 3987-3994.Article de revue Tremblay, S., Ronaldi, J., Baril, E., Laroche, S., L'Espérance, G., & Baseotto, G. (1997). Système de caractérisation des matériaux intégrés pour les microscopies optiques et électroniques, l'analyse d'images et la spectrométrie EDX. Revue matériaux et techniques (11-12), 57-60.
- 1996
Article de revue L'Espérance, G., Duchesne, E., & De Rege, A. (1996). Effect of materials and process parameters on microstructure and properties of sinter hardening alloys. Advances in powder metallurgy and particulate materials, 3(11), 397-413.Article de revue Blandin, J. J., Hong, B., Varloteaux, A., Suery, M., & L'Espérance, G. (1996). Effect of the nature of grain boundary regions on cavitation of a superplastically deformed aluminium alloy. ACTA Materialia, 44(6), 2317-2326.Article de revue Zhong, W. M., Goiffon, E., L'Espérance, G., Suery, M., & Blandin, J. J. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 1 : Dynamic recrystallization of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 84-92.Article de revue Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 3 : Fracture mechanisms of the composites. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 104-114.Article de revue Zhong, W. M., L'Espérance, G., & Suery, M. (1996). Effect of thermomechanical processing on the microstructure and mechanical properties of Al-Mg (5083)/SiCp and Al-Mg (5083)/Al₂O₃ p composites. Part 2 : Tensile properties at different temperatures. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 214(1-2), 93-103.Article de revue Tsunemichi, I., Sumito, K., L'Espérance, G., Bande, H., & Daming, J. (1996). Effect of volume fraction of aln particle on superplasticity of aln/6061 aluminum alloy composite. Scripta Materialia, 35(10), 1199-1204.Article de revue Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Effects of lithium addition and wheel velocity on the microstructure of aluminium-lithium alloy ribbons. Journal of Materials Science, 31(4), 1027-1034.Article de revue Imai, T., Kojima, S., L'Espérance, G., Hong, B. D., Jiang, D., & Nieh, T. G. (1996). Effects of temperature on the superplastic characteristics of a powder-metallurgy pure aluminum. Scripta Materialia, 35(10), 1189-1193.Article de revue Zayed, J., Mikhail, M., Loranger, S., Kennedy, G. G., & L'Espérance, G. (1996). Exposure of taxi drivers and office workers to total and respirable manganese in an urban-environment. American Industrial Hygiene Association Journal, 57(4), 376-380.Article de revue Imai, T., Tochigi, I., Ai, K., L'Espérance, G., & Hong, B. D. (1996). High-strain rate superplasticity of a beta-si3n4 whisker-reinforced pure aluminum composite made by squeeze casting. Scripta Materialia, 34(10), 1627-1631.Article de revue Zhong, W., L'Espérance, G., & Suéry, M. (1996). Interfacial reactions in Al-Mg(5083) SiCp composites during fabrication and remelting. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 26(10), 2637-2649.Article de revue Ababou, Y., Desjardins, P., Masut, R. A., Yelon, A., & L'Espérance, G. (1996). Metalorganic vapor phase epitaxy and structural characterization of InP on Si(111). Canadian Journal of Physics, 74(1), S108-S111.Article de revue Guillet, A., Es-Sadiqi, E., L'Espérance, G., & Hamel, F. G. (1996). Microstructure and mechanical properties of strip cast 1008 steel after simulated coiling and batch annealing, cold rolling. ISIJ International, 36(9), 1190-1198.Article de revue Hajjaji, M., Cutler, L., & L'Espérance, G. (1996). Phases in as-spun and aged binary aluminium-lithium ribbons. Journal of Materials Science, 31(14), 3715-3721.Article de revue Beaudoin, M., Bensaada, A., Leonelli, R., Desjardins, P., Masut, R. A., Isnard, L., Chennouf, A., & L'Espérance, G. (1996). Self-consistent determination of the band offsets in InAsₓP₁₋ₓ/InP strained layer quantum wells and the bowing parameter of bulk InAsₓP₁₋ₓ. Physical review. B, Condensed matter, 53(4), 1990-1996.Article de revue Abadou, Y., Desjardins, P., Chennouf, A., Leonelli, R., Hetheringtin, A., Yelon, A., L'Espérance, G., & Masut, R. A. (1996). Structural and optical charact. of InP grown on Si(111) by metalorganic vapor phase epitaxy using thermal cycle growth. Journal of Applied Physics, 80(9), 499-505.Article de revue Desjardins, P., Beaudoin, M., Leonelli, R., L'Espérance, G., & Masut, R. A. (1996). Structural and optical properties of strain-relaxed InAsP/InP heterostructures grown by metalorganic vapor phase epitaxy on InP(001) using tertiarybutylarsine. Journal of Applied Physics, 80(2), 846-852.
- 1995
Article de revue Barreto, M. P., Veillette, R., & L'Espérance, G. (1995). Development and application of a dry ultramicrotomy technique for the preparation of galvanneal sheet coatings. Microscopy Research and Technique, 31(4), 293-299.Article de revue Imai, T., L'Espérance, G., Hong, B. D., & Kojima, S. (1995). High strain rate superplasticity of aln particulate reinforced 1n90 pure aluminum composite. Scripta Metallurgica Et Materialia, 33(8), 1333-1338.Article de revue Imai, T., L'Espérance, G., Hong, B. D., & Tozawa, Y. (1995). High strain rate superplasticity of tib2 particulate reinforced aluminium alloy composite. Journal of Materials Science Letters, 14(5), 373-376.Article de revue Zhong, W. M., L'Espérance, G., & Suery, M. (1995). Interfacial reactions in al-mg (5083)/al(2)o(3)p composites during fabrication and remelting. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 26(10), 2625-2635.Article de revue Gonzalez, G., Salvo, L., Suery, M., & L'Espérance, G. (1995). Interfacial reactions in al-mg metal matrix composites reinforced with (sn/sb) oxide coated sic particles. Scripta Metallurgica Et Materialia, 33(12), 1969-1975.Article de revue Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (1995). Locating the modifier in a polymer blend by electron energy-loss spectroscopy. Macromolecules, 28(13), 4771-4773.Article de revue Hovington, P., L'Espérance, G., Baril, E., & Rigaud, M. (1995). Monitoring the performance of energy-dispersive spectrometer detectors at low-energy. Journal of scanning microscopy, 17(3), 136-138.Article de revue Botton, G. A., L'Espérance, G., Gallerneault, C. E., & Ball, M. D. (1995). Volume fraction measurement of dispersoids in a thin foil by parallel energy-loss spectroscopy: development and assessment of the technique. Journal of Microscopy, 80(3), 217-229.
- 1994
Article de revue Botton, G., & L'Espérance, G. (1994). A TEM/STEM PEELS spectrum--imaging system and some applications in materials science. Electron Optics Bulletin, 133, 35-38.Article de revue Botton, G., & L'Espérance, G. (1994). Development, quantitative performance and applications of a parallel electron energy-loss spectrum imaging system. Journal of Microscopy, 173(1), 9-25.Article de revue Imai, T., L'Espérance, G., Hong, B. D., & Tozawa, Y. (1994). Fabrication and properties of tic particulate reinforced aluminium alloy composite foils. Journal of Materials Science Letters, 13(13), 963-965.Article de revue Simoneau, M., L'Espérance, G., & Schulz, R. (1994). Formation by ball milling and recrystallization of Y-Ba-Cu-O nanocrystalline phases. Journal of Applied Physics, 76(1), 163-171.Article de revue Imai, T., L'Espérance, G., & Hong, B. D. (1994). High strain rate superplasticity of aln particulate reinforced aluminium alloy composites. Scripta Metallurgica Et Materialia, 31(3), 321-326.Article de revue Salvo, L., L'Espérance, G., Suéry, M., & Legoux, J. G. (1994). Interfacial reactions and age hardening in Al-Ms-Si metal matrix composites reinforced with SiC particles. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 177(1), 173-183.Article de revue Simoneau, M., L'Espérance, G., Trudeau, M. L., & Schulz, R. (1994). Structural and magnetic characterization of granular Y₁Ba₂Cu₃O₇₋δ nanocrystalline powders. Journal of Materials Research, 9(3), 535-540.Article de revue Hong, B. D., L'Espérance, G., Dickson, J. I., & Meng, Q. C. (1994). Trace rotations of planar features with foil tilting on transmission electron-micrographs. Materials Characterization, 32(1), 3-13.
- 2024
- Communications de conférence (45)
- 2018
Communication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (mai 2018). 3D printing of metallic structures from a green ink [Communication écrite]. CSME International Congress, Toronto, Ontario, Canada.Communication de conférence Nobari, A. H., St-Laurent, S., Thomas, Y., Bouchemit, A., & L'Espérance, G. (mai 2018). Performance of fine and ultra-fine lead-free powders for solder paste applications [Communication écrite]. 68th IEEE Electronic Components and Technology Conference (ECTC 2018), San Diego, CA.
- 2017
Communication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (juillet 2017). Dense metallic structure fabrication through 3D printing of metallic inks and subsequent metal sintering [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States.
- 2016
Communication de conférence Xu, C., Bouchemit, A., L'Espérance, G., Laberge Lebel, L., & Therriault, D. (août 2016). Three-dimensional direct-write printing of metallic microstructures [Affiche]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec.
- 2011
Communication de conférence Bernier, F., Gauthier, M., Plamondon, P., & L'Espérance, G. (mai 2011). Copper strengthening of PM steel parts [Communication écrite]. 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011, San Francisco, CA, United states.
- 2008
Communication de conférence Tougas, B., Blais, C., & L'Espérance, G. (juin 2008). New iron powder with improved machinability [Communication écrite]. 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, Washington, DC, United states.Communication de conférence Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (juin 2008). The Neumann triangle method to measure interfacial tensions in immiscible polymer blends using focused ion beam and atomic force microscopy [Communication écrite]. 24th Annual meeting of Polymer Processing Society, Salerno, Italy.
- 2007
Communication de conférence Virgilio, N., Desjardins, P., L'Espérance, G., & Favis, B. D. (août 2007). Novel self-assembling pearl necklace microstructure induced by partial wetting in ternary polymer blends [Résumé]. ACS Polymeric Materials: Science and Engineering. Fall Meeting 2007., Boston, Mass., USA.
- 2005
Communication de conférence Campbell-Tremblay, J., Blais, C., L'Espérance, G., & Boilard, P. (juin 2005). Characterization of the fatigue performance of P/M components produced with powders developed for improved machinability [Communication écrite]. 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005, Montréal, Québec.Communication de conférence Virgilio, N., Pépin, M. F., Desjardins, P., L'Espérance, G., & Favis, B. D. (août 2005). High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy [Communication écrite]. PPS 2005 America's Regional Meeting of the Polymer Processing Society, Québec, QC, Canada..Communication de conférence Bernier, F., Boilard, P., Bailon, J.-P., & L'Espérance, G. (juin 2005). Machinability and dynamic properties of sinter-hardened steel parts [Communication écrite]. 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005, Montréal, Québec.
- 2000
Communication de conférence Plamondon, P., & L'Espérance, G. (mai 2000). Application of analytical electron microscopy (AEM) to the developmentof high performance powders [Communication écrite]. PM2TEC 2000 : International Conference on Powder Metallurgy & Particulate Materials, New York, NY, USA.Communication de conférence Julien, B., Duchesne, E., & L'Espérance, G. (mai 2000). Influence of nickel additions, sintering temperature and microstructureon the mechanical properties of prealloyed Mn-Ni-Mo steel powders [Communication écrite]. PM2TEC 2000: 2000 International Conference on Powder Metallurgy & Particulate Materials, New York, NY, USA.
- 1999
Communication de conférence Dionne, M., L'Espérance, G., & Mirtchi, A. (février 1999). Caractérisation de la mouillabilité d'un matériau composite TiB₂-Carbone, Aluminium [Communication écrite]. 128th TMS Annual Meeting 'Light Metals 1999', San Diego, CA. Publié dans Light Metals: Proceedings of Sessions, TMS Annual Meeting, 5(1).Communication de conférence Blais, C., L'Espérance, G., & Miele, P. (mai 1999). Experimental evaluation of the reducibility of oxide particles found in powders and P/M parts [Communication écrite]. International Conference and Exhibition on Powder Metallurgy and Particulate Materials, Las Vegas, NV, USA.
- 1998
Communication de conférence Baril, E., L'Espérance, G., & Boutin, É. Effect of process parameters on inhibition breakdown mechanisms during hot dip galvannealing [Communication écrite]. GALVATECH 1998.Communication de conférence Imai, T., Kojima, S., Jiang, D., Mao, J., L'Espérance, G., & Hong, B. (octobre 1998). Superplasticity of 1N90 pure aluminum and the thermomechanical processing [Communication écrite]. Minerals, Metals and Materials Society (TMS) fall meeting, Rosemont, IL (United States).
- 1997
Communication de conférence Blais, C., L'Espérance, G., Baril, E., & St-Pierre, E. (janvier 1997). Complete characterization of second phase particles using a system integrating SEM, image analysis and EDS [Communication écrite]. IMS-Microstructural science, Seattle, USA.Communication de conférence Demarty, C. H., Jeulin, D., L'Espérance, G., & Perrier, E. (janvier 1997). 3D morphological analysis of the connectivity of a sintered material [Communication écrite]. FMM 97, Buffalo, USA.Communication de conférence Imai, T., Hikosaka, T., L'Espérance, G., Hong, B., & Jiang, D. (janvier 1997). High strain rate superplasticity of ceramuc particulate reinforced aluminum composites and the fabrication processing [Communication écrite]. 11th international conference on composite materials, Queensland, Australia.Communication de conférence Imai, T., Lojima, S., Tochigi, I., L'Espérance, G., Hong, B., & Jiang, D. (janvier 1997). High strain rate superplasticity of discontinous fiber reinforced pure aluminum composites [Communication écrite]. Light weigth alloys for aerospace application symposium, TMS annual meeting, Orlando, FL, USA.Communication de conférence Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., & Hong, B. (février 1997). High strain rate superplasticity of discontinuous fiber reinforced pure aluminum composites [Communication écrite]. Light weight alloys for aerospace applications IV : 4th symposium, Orlando, Fl, USA.Communication de conférence Imai, T., Kojima, S., Jiang, D., Mao, J., L'Espérance, G., & Hong, B. (octobre 1997). High strain rate superplasticity of TiC particulate reinforced aluminum composites [Communication écrite]. Challenging to Advanced Materials and Processing Technology Aiming for New Industrial Applications; 5th Japan International Sampe Symposium, Tokyo, Japan.Communication de conférence Imai, T., Mao, J. F., Kojimi, S., L'Espérance, G., & Hong, B. (janvier 1997). High strain rate superplasticity of TiC particulate reinforced aluminum composites and the microstructures [Communication écrite]. 5th japan international SAMPE symposium-society for the advancement of material and process engineering, Tokyo, Japan.Communication de conférence Blais, C., L'Espérance, G., Deschenes, B., & de Rege, A. (juin 1997). Influence of furnace atmospheres on the chemistry of additives to powders made for improved machinability [Communication écrite]. 1997 International Conference on Powder Metallurgy and Particulate Materials, Chicago, IL, USA.Communication de conférence Blais, C., L'Espérance, G., & de Rege, A. (juin 1997). State of the art characterization of second phase particles found in powders and P/M parts [Communication écrite]. 1997 International Conference on Powder Metallurgy and Particulate Materials, Chicago, IL, USA.
- 1996
Communication de conférence Lefebvre, L. P., L'Espérance, G., & Suery, M. Age-hardening behavior of al-1 wt-% mg/sic(ind p) composites fabricated with TiO₂-coated sic particles [Communication écrite]. Processing, properties, and applications of cast metal matrix composites: symposium held at the 1996 TMS Fall Meeting in Cincinnati, Ohio.Communication de conférence Lefebvre, L. P., L'Espérance, G., & Suéry, M. (janvier 1996). Age-hardening behavior of Al-wt%/Mg/SiCo composites fabricated with TiO2 coated SiC particles [Communication écrite]. TMS fall meeting- Properties and applications of cast metal matrix composites, Cincinnati, USA.Communication de conférence Blais, C., L'Espérance, G., Baril, E., & Forget, C. (août 1996). Characterization of small inclusions: SEM vs TEM, or is it even worth considering SEM [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States).Communication de conférence L'Espérance, G., Martel, S., & De Rege, A. (juin 1996). Detailed microstructural characterization of recently developedpartically alloyed powders [Communication écrite]. Advances in Powder Metallurgy and Particulate Materials -1996 : 1996 World Congress on Powder Metallurgy & Particulate Materials, Washington, DC, USA.Communication de conférence L'Espérance, G., Dionne, M., & Tremblay, S. (août 1996). Extracting 3-D information from SEM and TEM images: Approaches and applications in the physical sciences [Communication écrite]. Microscopy and microanalysis 1996, Minneapolis, MN (United States).Communication de conférence Imai, T., Kojima, S., Tochigi, I., L'Espérance, G., Hong, B., & Jiang, D. (août 1996). High strain rate superplasticity of discontinuous fiber reinforced aluminum alloy composites [Communication écrite]. Processes in advanced materials and mechanics : International conference on advanced materials, Beijing, China.
- 1995
Communication de conférence Simoneau, M., L'Espérance, G., & Schulz, R. (juillet 1995). Abnormal grain growth in sintered YBa₂Cu₃O₇₋[dₑₗₜₐ] nanocrystalline powders produced by high energy ball milling [Communication écrite]. International symposium on metastable, mechanically alloyed and nanocrystalline materials. Publié dans Materials Science Forum, 225-227(2).Communication de conférence Blais, C., L'Espérance, G., Baril, E., & Forget, C. (janvier 1995). Estimation of errors resulting from stereological measurements of inclusions characterized by X-ray mapping in SEM [Communication écrite]. Microbeam analysis society 1995, Colorado, USA.Communication de conférence L'Espérance, G., Martel, S., de Rege, A., Kiefer, B., & Chen, Y. T. (mai 1995). Evaluation of the effect of tempering on microstructure and properties of three widely used sinter hardening alloys [Communication écrite]. 1995 International Conference & Exhibition on Powder Metallurgy & Particulate Materials, Seattle, WA, USA.Communication de conférence L'Espérance, G., Harton, S., de Rege, A., & Nigarura, S. (mai 1995). Evaluation of the hardenability, microstructure and properties of various sinter hardening alloys [Communication écrite]. 1995 International Conference & Exhibition on Powder Metallurgy & Particulate Materials, Seattle, WA, USA.Communication de conférence Ababou, Y., Desjardins, P., Chennouf, A., Masut, R. A., Yelon, A., Leonelli, R., & L'Espérance, G. (juin 1995). Growth of strain-balanced GaInP/InAsP MQW by LP-MOVPE [Communication écrite]. 6th European workshop on Metal-Organic Vapour Phase Epitaxy and related techniques, Gent, Belgique.Communication de conférence Imai, T., L'Espérance, G., Hong, B., Kojima, S., & Kusui, J. (février 1995). High strain rate superplasticity of ceramic particulate reinforced aluminium alloy composites [Communication écrite]. Advances in superplasticity and superplastic forming, 1995 : Conference on superplasticity and superplastic forming, Las Vegas, Ne, USA.Communication de conférence Bensaada, A., Suys, M., Beaudoin, M., Desjardins, P., Isnard, L., Masut, R. A., Cochrane, R. W., Currie, J. F., & L'Espérance, G. (juin 1995). LP-MOVPE growth and characterization of InₓGa₁₋ₓAs/InP epilayers and multiple quantum wells using tertiarybutylarsine [Communication écrite]. 6th European Workshop on Metal-Organic Vapour Phase Epitaxy and related growth techniques, Gent, Belgium.Communication de conférence Ardeleanu, A., Loranger, S., Gareau, L., Zayed, J., L'Espérance, G., & Kennedy, G. G. (novembre 1995). Physico-chemical characteristics of particles emitted from vehicles using gasoline with methylcyclopentadienyl manganese tricarbonyl [Communication écrite]. 2nd world Conference of the Society of Environmental Toxicology and Chemistry (SETAC), Vancouver (Canada).Communication de conférence Tremblay, A., Tremblay, S., Favis, B. D., Selmani, A., & L'Espérance, G. (mai 1995). Spectroscopic analyses of compatibilized polymer blends [Communication écrite]. 53rd Annual Technical Conference, Boston, MA, USA.
- 1994
Communication de conférence Beaudoin, M., Masut, R. A., Isnard, L., Desjardins, P., Bensaada, A., L'Espérance, G., & Leonelli, R. (novembre 1994). Band offsets of InAsxP₁₋x/InP strained layer quantum wells grown by LP-MOVPE using TBAs [Communication écrite]. Microcrystalline and nanocrystalline semiconductors : Symposium F of the 1994 Fall Meeting of the Materials Research Society, Boston, USA.Communication de conférence L'Espérance, G., Hovington, P., Baril, E., & Blais, C. (janvier 1994). Procedures and samples to monitor the long term low energy performance of energy-dispersive X-ray spectrometers [Communication écrite]. Réunion conjointe microscopy society of america (52ieme réunion annuelle) et microbeam analysis society (28ieme réunion annuelle), Nouvelle-Orléan, Louisiana, USA.Communication de conférence Zhong, W. M., & L'Espérance, G. (janvier 1994). True composition profiles obtained by a graphical deconvolution technique using analytical transmission electron microscopy [Communication écrite]. 21e réunion annuelle de la SMC/MSC, Montréal, Québec.Communication de conférence Tremblay, S., & L'Espérance, G. (janvier 1994). Volume fraction determination of secondary phase particles in aluminium thin foils with plasmin energy shift imaging [Communication écrite]. 13ieme congrès international de la microscopie électronique, Paris, France.
- 2018
- Chapitres de livre (1)
- 2001
Chapitre de livre Blais, C., & L'Espérance, G. (2001). Optimization of machining operations of parts made of high performance alloyed powders. Dans Powdered metal performance applications (47-52).
- 2001
- Brevets (7)
- 2019
Brevet Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Demande de brevet no US20190054536).
- 2018
Brevet Boisvert, M., L'Espérance, G., Beaulieu, P., & Christopherson, D. B. J. (2018). Free graphite containing powders. (Demande de brevet no US20180105906).
- 2017
Brevet Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2017). Metal 3D printing method and metallic 3D printing materials. (Demande de brevet no CA2976782).Brevet Christopherson, D. B. J., L'Espérance, G., Koth, J., Beaulieu, P., Farthing, L. J., & Schoenwetter, T. (2017). Thermal spray applications using iron based alloy powder. (Brevet no US9624568).
- 2015
Brevet Christopherson, D. B. J., Farthing, L. J., Schoenwetter, T., L'Espérance, G., & Beaulieu, P. (2015). Powder metal compositions for wear and temperature resistance applications and method of producing same. (Brevet no US9162285).
- 2013
Brevet L'Espérance, G., Bailon-Poujol, I., & Christopherson, D. B. J. (2013). Master alloy for producing sinter hardened steel parts and process for the production of sinter hardened parts. (Demande de brevet no US20130039796).
- 2010
Brevet Christopherson, D. B. J., Farthing, L. J., Schoenwetter, T., L'Espérance, G., & Beaulieu, P. (2010). Powdered metal alloy composition for wear and temperature resistance applications and method of producing same. (Demande de brevet no WO2009126674).
- 2019
- Rapports (1)
- 2019
Rapport Debia, M., Catto, C., Fleck, A., Masse, J.-P., L'Espérance, G., & Roberge, B. (2019). Caractérisation des particules nanométriques non intentionnelles émises dans différents milieux de travail. (Rapport technique n° R-1075).
- 2019