Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). A low-cost open-source automated shot peen forming system. HardwareX, 11, e00263 (13 pages).
Répertoire des expertises
Khameneifar, Farbod
Répertoire des expertises
Khameneifar, Farbod
Répertoire des expertises
Publications par type
Article de revue (20)
Communication de conférence (18)
Livre
Chapitre de livre
Brevet
Rapport
Thèse (2)
Ensemble de données
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Farbod Khameneifar (40)
- Articles de revue (20)
- 2022
Article de revue Article de revue Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2022). Closed-loop shot peen forming with in-process measurement and optimization. CIRP Journal of Manufacturing Science and Technology, 38, 500-508.Article de revue Ghorbani, H., & Khameneifar, F. (2022). Construction of damage-free digital twin of damaged aero-engine blades for repair volume generation in remanufacturing. Robotics and Computer-Integrated Manufacturing, 77, 16 pages.
- 2021
Article de revue Ghorbani, H., & Khameneifar, F. (2021). Accurate registration of point clouds of damaged aero-engine blades. Journal of Manufacturing Science and Engineering, 143(3), 10 pages.Article de revue Sepahi-Boroujeni, S., Mayer, J. R. R., Khameneifar, F., & Wozniak, A. (2021). A full-covariance uncertainty assessment in on-machine probing. International Journal of Machine Tools and Manufacture, 167, 12 pages.Article de revue Ghorbani, H., & Khameneifar, F. (2021). Airfoil profile reconstruction from unorganized noisy point cloud data. Journal of Computational Design and Engineering, 8(2), 740-755.Article de revue Gondran, M., Abdin, Y., Gendreau, Y., Khameneifar, F., & Laberge Lebel, L. (2021). Automated braiding of non-axisymmetric structures using an iterative inverse solution with angle control. Composites Part A: Applied Science and Manufacturing, 143, 13 pages.Article de revue Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2021). Efficient uncertainty estimation of indirectly measured geometric errors of five-axis machine tools via Monte-Carlo validated GUM framework. Precision Engineering, 67, 160-171.Article de revue Bonin, R., Khameneifar, F., & Mayer, J. R. R. (2021). Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact. Sensors, 21(6), 2137 (18 pages).
- 2020
Article de revue Siguerdidjane, W., Khameneifar, F., & Gosselin, F. (2020). Efficient planning of peen-forming patterns via artificial neural networks. Manufacturing Letters, 25, 70-74.Article de revue Jadayel, M., & Khameneifar, F. (2020). Improving geometric accuracy of 3D printed parts using 3D metrology feedback and mesh morphing. Journal of Manufacturing and Materials Processing, 4(4), 112 (15 pages).Article de revue Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (2020). Repeatability of on-machine probing by a five-axis machine tool. International Journal of Machine Tools and Manufacture, 152, 19 pages.
- 2019
Article de revue Ghandali, P., Khameneifar, F., & Mayer, J. R. R. (2019). A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners. Optics and Lasers in Engineering, 121, 87-95.Article de revue Khameneifar, F., & Ghorbani, H. (2019). On the curvature estimation for noisy point cloud data via local quadric surface fitting. Computer-Aided Design and Applications, 16(1), 140-149.
- 2017
Article de revue Khameneifar, F., & Feng, H.-Y. (2017). Establishing a balanced neighborhood of discrete points for local quadric surface fitting. Computer-Aided Design, 84, 25-38.Article de revue Khameneifar, F., & Feng, H.-Y. (2017). Extracting sectional contours from scanned point clouds via adaptive surface projection. International Journal of Production Research, 55(15), 4466-4480.
- 2016
Article de revue Khameneifar, F., & Feng, H.-Y. (2016). A new methodology for evaluating position and orientation errors of airfoil sections. International Journal of Advanced Manufacturing Technology, 83(5-8), 1013-1023.
- 2014
Article de revue Khameneifar, F., & Feng, H.-Y. (2014). Airfoil profile reconstruction under the uncertainty of inspection data points. International Journal of Advanced Manufacturing Technology, 71(1-4), 675-683.
- 2013
Article de revue Khameneifar, F., Arzanpour, S., & Moallem, M. (2013). A Piezoelectric Energy Harvester for Rotary Motion Applications: Design and Experiments. IEEE/ASME Transactions on Mechatronics, 18(5), 1527-1534.
- 2011
Article de revue Khameneifar, F., Moallem, M., & Arzanpour, S. (2011). Modeling and Analysis of a Piezoelectric Energy Scavenger for Rotary Motion Applications. Journal of Vibration and Acoustics, 133(1), 6 pages.
- 2022
- Communications de conférence (18)
- 2023
Communication de conférence Jadayel, M., & Khameneifar, F. (mai 2023). A novel setup for in-process geometric inspection of 3D printed parts via structured-light 3D scanning [Communication écrite]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada.Communication de conférence Latulippe, M., Khameneifar, F., & Mayer, J. R. R. (mai 2023). Correction of the systematic errors of 3D scanner measurements by data fusion with CMM data [Communication écrite]. International Congress of the Canadian Society of Mechanical Engineering (CSME 2023), Sherbrooke, QC, Canada.Communication de conférence Jadayel, M., & Khameneifar, F. (juillet 2023). Structured-light 3D scanning performance in offline and in-process measurement of 3D printed parts [Communication écrite]. 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2023), Gulf of Naples, Italy.
- 2022
Communication de conférence Jadayel, M., & Khameneifar, F. (juin 2022). 3D scan data-based shape compensation using graph U-Nets to correct the systematic geometric errors of additive manufacturing parts [Affiche]. 5th Holistic Innovation in Additive Manufacturing Conference (HI-AM 2022), Montréal, Québec.
- 2021
Communication de conférence Jadayel, M., & Khameneifar, F. (juin 2021). A shape Compensation Approach for Enhancing the Geometric Accuracy of Additive Manufacturing Parts [Résumé]. 4th Holistic Innovation in Additive Manufacturing Conference (HI-AM 2021).Communication de conférence Sepahi-Boroujeni, S., Mayer, J. R. R., & Khameneifar, F. (juillet 2021). Prompt uncertainty estimation with GUM framework for on-machine tool coordinate metrology [Communication écrite]. 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf on Naples, Italy (5 pages). Publié dans Procedia CIRP, 112.Communication de conférence Ghorbani, H., & Khameneifar, F. (juillet 2021). Scan-to-CAD alignment of damaged airfoil blade point clouds through geometric dissimilarity assessment [Communication écrite]. 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2021), Gulf on Naples, Italy (5 pages). Publié dans Procedia CIRP, 112.
- 2020
Communication de conférence Jadayel, M., & Khameneifar, F. (juin 2020). Improving the geometric accuracy of additive manufactured parts via 3D metrology feedback and CAD morphing [Affiche]. 3rd Holistic Innovation in Additive Manufacturing Conference (HI-AM 2020).
- 2019
Communication de conférence Siguerdidjane, W., Khameneifar, F., Gosselin, F., & Levasseur, G. (mars 2019). A deep learning approach to solving the peen forming inverse problem [Résumé]. APS March Meeting 2019, Boston, Massachusetts. Publié dans Bulletin of the American Physical Society, 64(2).Communication de conférence Gondran, M., Laberge Lebel, L., & Khameneifar, F. (décembre 2019). Development of an iterative braiding model with angle control and thickness measurement [Affiche]. Colloque Annuel du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance CREPEC, Québec, Québec.Communication de conférence Khameneifar, F. (juin 2019). Innovative strategies for assessing the metrological performance of optical 3D scanners [Résumé]. International Congress of the Canadian Society for Mechanical Engineering (CSME 2019), London, Ontario.
- 2018
Communication de conférence Khameneifar, F., & Ghorbani, H. (juillet 2018). Estimating principal curvatures in noisy point clouds through local quadric surface fitting [Communication écrite]. 15th Annual International CAD Conference (CAD 2018), Paris, France.
- 2017
Communication de conférence Khameneifar, F., & Feng, H.-Y. (mai 2017). Section-specific inspection of free-form surfaces via optical 3D scanning [Communication écrite]. 6th International Conference on Virtual Machining Process Technology (VMPT 2017), Montréal, Québec.
- 2014
Communication de conférence Khameneifar, F., & Feng, H.-Y. (mai 2014). Neighborhood identification for scanned point clouds in airfoil blade inspection [Communication écrite]. 3rd CIRP International Conference on Virtual Machining Process Technology (VMPT 2014), Calgary, AB.
- 2013
Communication de conférence Khameneifar, F., Feng, H.-Y., Delorme, F.-É., & Engin, S. (mai 2013). An improved method for closed nonperiodic B-spline curve approximation [Communication écrite]. 2nd CIRP International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, ON.
- 2010
Communication de conférence Khameneifar, F., Arzanpour, S., & Moallem, M. (novembre 2010). Piezo-Actuated Active Decoupler Hydraulic Engine Mount [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia.Communication de conférence Khameneifar, F., Arzanpour, S., & Moallem, M. (novembre 2010). Vibration Energy Harvesting From a Hydraulic Engine Mount via PZT Decoupler [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia.
- 2008
Communication de conférence Khameneifar, F., & Arzanpour, S. (octobre 2008). Energy Harvesting From Pneumatic Tires Using Piezoelectric Transducers [Communication écrite]. ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, Maryland.
- 2023
- Thèses (2)
- 2015
Thèse Khameneifar, F. (2015). Section-specific geometric error evaluation of airfoil blades based on digitized surface data [Thèse de doctorat, University of British Columbia].
- 2011
Thèse Khameneifar, F. (2011). Vibration-based piezoelectric energy harvesting system for rotary motion applications [Mémoire de maîtrise, Simon Fraser University].
- 2015